We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Chamfering and deburring machine for gears, type: zea-4, manufactured by gleason hurth, germany, 2009. Siemens cnc control. Technical condition - like new! The Gleason-Hurth ZEA-4 rotary deburring machine is designed for dry deburring of disc details up to 280mm in diameter and shafts up to 400mm in length, max. module 5. There is a set for the deburring machine. DTR.
used
CNC Control : SIEMENS 840D Max. Module : 7 Max. Diameter : 400 mm Z axis vertical travel : 200 mm X axis horizontal flange travel : 255 mm Y axis – shifting : 135 mm Work piece holder inclination : 45° Max. Wheel diameter : 350 mm Min. Wheel diameter : 270 mm Filtration unit
used
workpiece diameter: 125 mm module: 4 Control: SIEMENS 840 C x-axis: 105 mm y-axis: 40 mm z-axis: 500 mm total power requirement: 47 kVA weight of the machine ca.: 5,5 t dimensions of the machine ca.: 2,6x2,1x3,1 m with measuring and palletizing system from Hörzer & Fehrenbach for gearwheels (bore receiver) Workpiece diameter: 17-39.5 mm Component height: approx. 6-15 mm Oblique as well as straight toothed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. wheel diameter:40-160 mm gear width:90 mm max. module:3,5 min. module:1,25 weight of the machine ca.:5,6 t For detailed technical data, see PDF File Page 15-16
used
max. wheel diameter: 40 - 160 mm gear width: 90 mm Control: SIEMENS SINUMERIC 840D Gear shaving - / deburring machine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. wheel diameter: 40 - 160 mm gear width: 90 mm Control: SIEMENS SINUMERIC 840D Gear shaving - / deburring machine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. wheel diameter: 40 - 160 mm gear width: 90 mm control: Siemens Sinumeric voltage: 400 V frequency: 50 Hz connected load: 34 kVA loading: 800 Euro The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
GEAR NOISE TESTER Make : HURTH Model : ZP320 B THE MACHINE IS IN EXCELLENT CONDITIONS AND COMPLETE IN ALL ITS PARTS
used
Wheel diameter - max. 300 mm Spindle speeds 250 - 2800 rpm Feed min/max 45/125 mm Module 8 Taper spindle ISO 40 Partial head angle 110º Total power requirement 3 kW Machine weight approx. 1.5 t Space requirement approx. 1.5 x 1.4 x 1.9 m
used
Description: Control type: CNC, control name: Siemens Sinumerik 840 C Technical details: Workpiece diameter at ratio 1:10 300 mm, workpiece diameter at ratio 1:1 212 mm, number of teeth - max. 200, number of teeth - min. 6, x-travel 300 mm, X - axis speed 0.1-5,000 mm/ sec., y-travel 400 mm, Y - axis speed 0.1-5,000 mm/sec., A - axis -170 / +170 °, total power requirement 38 kW, machine weight approx. 10 t, space requirement approx. 4.20 x 2.20 x 2.10 m weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 4,200 x 2,200 x 2,100 mm
used
Horizontal spline shaft milling machine HURTH KF 32 AH
used
Spline milling machine Hurth LF 32
used
Spline milling machine Hurth LF 32
used
Groove milling machine Fab. HURTH Type LFV 3Masch. -No: 3566 estimated year of construction 1963Groove width max.30.35 mmTravel X: 550 mmTravel Y: 300 mmTravel distance Z: 400 mmSpindle mount ISO: SK 40Milling carriage travel: 240 mmDepth feed screw stroke: 0-110 mmTable size: 300 x 1200 mmTable width: 350 mmProjection: 415 mm8 spindle speeds: 90-1000 rpm9 crank feeds: 1.4-22.4 p. minute9 table feeds lengthwise: 10.9-163 mm / minTable drive: 0.37 kWSpindle drive: approx. 2.5 kWSpindle deflection: 410 mmCutter diameter: max. 50 mmCutter head diameter: max. 110 mmSpindle drive approx: 2.5 kWOutside dimensions approx: 1.5 x 1.45 x 1.95 mmWeight approx: 2,2 tWith:- Deep milling device- Crank drive of the milling carriage- autom. longitudinal feedused, despite year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover ...
used
Wedge groove machine HURTH LF32a - see pictures
used
diameter:500 mm workpiece weight:30 kg test dia. min.:200 mm total power requirement:0,03 kW weight of the machine ca.:1000 kg dimensions of the machine ca.:1x0,5x1,06 m
used
max. wheel diameter: 280 mm max. number of teeth: 100 max. module: 6 min. module: 1 total power requirement: 6 kW weight of the machine ca.: 2500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
groove width: 16 mm x-travel: 16-200 mm table length: 1500 mm table width: 375 mm milling spindle: ISO 40 max. clampable toolpiece shaft diameter: 30 mm max. useable hobs, normal diameter: 40 mm distance between milling spindle and table: 150-250 mm axial move. of milling spindle (auto./manual): 120 mm vertical adjust. of milling slide (manual): 100 mm weight of the machine ca.: 3,1 t dimensions of the machine ca.: 2,00x1,40x2,40 m K4 - TECHDETAIL UK: 0,11 kW K4 - TECHDETAIL UK: 0,6/1,1 kW K4 - TECHDETAIL UK: 3 x 0,012-0,05 mm/U K4 - TECHDETAIL UK: 16x60 mm K4 - TECHDETAIL UK: 12 x 280 - 3550 U/min K4 - TECHDETAIL UK: 0,85 kW K4 - TECHDETAIL UK: 0-2,0 mm K4 - TECHDETAIL UK: 250 mm Condition: ready for production The machine is suitable for the manufacture of flutes and slots using undersize cutters with hydraulic adjustment. Roughing and finishing can be done in one single clamping. ...
used
max. wheel diameter: 0 mm max. number of teeth: 0 max. module: min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC controlled milling machine for synchronous rings The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. grinding diameter: 400 mm grinding width: 0 mm max. module: min. module: total power requirement: 3 kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: m Shaver cutter Ø, min./max. 64 - 320 mm Module range 1 - 12 Shaver cutter width, max. 40 mm No. of teeth 13 - 240 Pitch block Ø 73 - 320 mm Speeds of workpiece slide 5 / 20 / 30 / 40 teeth per min. Grinding slide speed 690 rpm Grinding slide Ø 762 mm Grinding wheel swivelling (pressure angle) 5 - 21 ° Grinding slide swivelling (helical angle) 2 x 35 ° Grinding slide adjustment, vertical 240 mm Cutting speed 1 / 0.5 / 0.25 m/min Spindle drive 1.1 kW Total electrical load, approx. 3 kW - 500 V - 50 Hz Weight, approx. 4,200 kg Accessories / Special Features * Machine is suitable for grinding internal and external shaver cutters. It is also suitable for master gears as well as cutters for gear shapers. Unfortuna ...
used
Chip centrifuge, Speed variator for the shaver, 2 points 1 hydraulic for small Ø and another manual for Ø up to 550mm / Centrifuge chips, Variable speed for shaver, 2 points for small or 1 Hydraulic and a manual for Ø up to 550mm, High: 2200 mm, Long: 1650 mm, Width: 1450 mm, Module: 8, Weight: 6,500 Kg., Voltage: 220/380 W., Total power: 6.5 Kw., Cutter ø max / min: 260/180 mm, Cutter length max / min: 30/20 mm, Maximum length workpiece: 250 mm, Ø max. / min. workpiece: 550/20 mm., Specification: Universal
used
max. grinding diameter: 400 mm : 18010 shaving cutter - diameter: 64 - 320 mm indexing: schleifbar 1 -12 Modul shaving wheel width: max. 40 mm number of teeth: 13 - 240 roller bend diameter min./max.: 73 - 320 mm slide speeds: 5-20-30-40 Zähne/min. max. dia. of grinding wheel: 762 mm grinding wheel - swivable: 5-21 ° grinding slide swivable +/-: 2 x 35 ° total power requirement: 3 kW weight of the machine ca.: 4,2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
amount: 49 STK weight: 10 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Workpiece dimensions: 360 mm max. workpiece diameter: 360 mm module: 8 mm x-travel: 400 mm y-travel: 240 mm z-travel: 360 mm milling head -swivable +/-: 45 ° diameter of hob: max. 175 mm milling spindle turning speed range:: 75-600 U/min. : 40 KVA control: 840C Siemens dimensions of the machine ca.: 3,10 x 2,40 x 2,70 m weight: 9 t total power requirement: 25 kW work piece revolutions: zweigänig 0,2-60 U/min counter-stay slide: 450 mm Verfahrweg Siemens Sinumerik 880 M - control partial gearbox double threaded, automatic workpiece feeding, conversational programm Video link: https://www.youtube.com/watch?v=GkQs8lfeNYk The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Manufacturer: ZF/hurth forklift drive HFK 250 -Admission wheel: dimensions see pictures -Hole circle: Ø 270 mm M12 -Dimensions: 700/330/H285 mm -Weight: 69 kg