used GIBEN Disc dividing saws

Cutting length max mm: 6000 Saw blade overstand mm: 115 Diameter saw blade mm: 430 Vorritzer: Yes Machine Control: Microprocessor - G Drive 2 D Total connection kW: 18 Weight Kg: 19,000 Loading and unloading system "Essedue" - Manipulators

SPECIFICATIONS: Equipment: Motorized loading roller conveyor Motorized roller stroke Slide arm with 7 pneumatic grippers Panel saw with a cutting width of 4500 mm Door pad on felt-covered platforms Sliding arm with 8 pneumatic grippers, connected by a continuous rod Lateral alignment device Panel saw width 2500 mm Vibrating chute for picking up and removing waste Shredder WEIMA model WLH300, built in 2007, motor 18.5 kW Unloading gantry 3ERRE AUTOMAZIONI model 1131, built in 2007 - length approx. 13000 mm Pneumatically operated mechanical gripping unit Motorized roller conveyor width 1700 mm length 4000 mm Side stop with idle rollers, side aligner, retractable front stop Motorized roller conveyor, width 1600 mm, length 5000 mm, concealed front stop 2 motorized floor roller conveyors, width 1600 mm, length 5000 mm 4 floor roller conveyors, width 900 mm, length 5000 mm ...

SPECIFICATIONS: Diameter of flywheel mm: 800 Installed capacity KW: 3.3 Made entirely of cast iron Complete with saw blade clamping device

Code: 0068 Brand: GIBEN Model: STARMATIC 850 - CE Standard CNC Horizontal panel saw with clamps for cutting wood panels, plywood, furniture, composite materials, sandwich panels, plastics and various materials - CE Standard Technical data: Useful cutting length 4500 mm Automatic pusher with lateral upper guides, electronically controlled, complete with 6 pneumatic clamps- Clamps opening 117 mm - Pusher stroke 4550 mm Max blade projection 85 mm Max main blade diameter 360 mm Main blade motor 7,5 kW - Rpm 3827 Max scoring blade diameter 160 mm Scoring blade motor 1,1 kW - Rpm 8290 Scoring exclusion with choiceor Quick tool removal (Pneumatic) Automatic adjustment of main blade overhang according to stack height Adjustment (lateral and in height) of outside scoring unit Blade carriage translation by brushless servomotor Blade carriage feed speed 1-80 m/min Blade car ...

-Trolley speed 1-130 m/min -Trolley return 130 m/min -Pusher speed 1-60 m/min. -Pusher return 60 m/min. -Dedusting fi 200 mm, 115 mm. -Side loading -Elevator width 2200 mm -Total power 22 kW The PRISMATIC 301 SPT is an automatic loading version with lifting table and pusher with grippers. It is a machine that provides high speed in the execution of the cutting cycle, thanks to special double-sided grippers equipped with a lower retracting appendix (Giben patent), allowing the collection of a stack of plates from the lifter without the use of other devices.

TECHNICAL DATA: Cutting length mm: 2200 Pusher stroke mm: 6150 Number of grippers: 8 Machine control: G-Drive Total connection kW: 20 Handling System "Esse2"

TECHNICAL DATA: Cutting length mm: 2200 Pusher stroke mm: 6150 Number of grippers: 8 Machine control: G-Drive Total connection kW: 20 Handling System "Esse2"

- Trolley speed 1-130 m/min -Return of the trolley 130 m/min - Pusher speed 1-60m/min. -Push return 60 m/min. -Dust extraction fi 200 mm, 115 mm. -Side loading -Elevator width 2200 mm -Total power 22 kW PRISMATIC 301 SPT is the automatic loading version with a raised table and a pusher with grippers. It is a machine that provides high speed in the execution of the cutting cycle, thanks to special double-sided grippers equipped with a lower retracting tab /Giben patent/, enabling the collection of a stack of panels from the lift without the use of other devices.

Clamping head VEB Vorrichtungsbau WeißENFELS Type G2 Direct dividing apparatus, partial head, dividing apparatus with collet holder Order No: 31202 Fixture No: TGL 30-07101 Collet holder 163E Height 140 mm Through hole 28 mm Clamping surface 265 x 165 mm - Index detent from 0 to 180 every 15 (12x)- Index detent from 180 to 360 every 45 (4x) - Collet set with 16 pieces Compression collets type 163E - 12 pieces Collets round 6 / 8 / 10 / 12 / 14 / 16 / 18 / 20 / 22 / 24 / 26 / 28 mm- 3 pieces Collet hexagon 8 / 10 / 14 mm- 1 piece collet square 12 mm- clamping surface with 20 mm guide groove Dimension dividing apparatus L x W x H 265 x 230 x 140 mm Weight: kg good condition; used

Specifications Cutting length 3200 mm Cutting width (program slide travel) 2200 mm 3 air cushion tables 1835 x 645 mm Saw blade protrusion 62 mm Saw carriage feed: forward 6-32 m/min backwards constant 32 m/min Program slider speed: forward 12 m/min backwards 12 m/min Angle rearing device on one side (semi-automatic) min. pressure width 100 mm pressure width 1300 mm Main saw motor 5.5 kW Vorritzsägemotor 0,55 kW Stops swivel 5 pieces Coated front tables 1750 x 400 mm 1 piece (manual measuring stop/extendable) Coated front tables 1000 x 400 mm 2 pieces (fixed) Working height 900 mm Main saw blade 300 x 4.4 x 75 mm Scribbling saw blade 150 x 4.4 - 5.6 x 45 mm Compressed air 6 bar Operating voltage 380 V / 50 Hz Minimum suction speed at the suction nozzle approx. 25 m/sec Suction connection chip channel 1 piece 180 mm Suction connection pressure beam 1 piece 120  ...

Horizontal panel saw SCM model SIGMA 90 General characteristics: -useful cutting length 4500mm -useful cutting depth 4300mm -blade protrusion 90mm -fluted pressor -pusher with 9 pneumatic grippers -side approach -front planes in bakelite and air veil: * 1 fixed 2500x600mm * 2 x 1500x600mm cabinets Blade group: -Independent blade group and engraver -main blade D=350mm -engraver D=160mm Programming: -control MASTER 124/S Machine according to CE regulations

Power main motor: 7 kW Cutting length: 3,300 mm Cutting depth: 3,200 mm Cutting height: 60 mm Saw blade protrusion: 67 mm Collets: 5 pieces Main saw blade: 320 mm Scoring saw blade: 160 mm Saw carriage feed flow: 0-80 m/min Saw carriage feed return: 0-80 m/min Program slide feed flow: 0-25 m/min Program slide feed return: 0-50 m/min Air cushion tables: 3 Scoring: 1.3 kW Control: PC/PLC with M258 unit Software: Wincut 12 Lift table dimensions: 3,300 x 1,850 mm Lifting table with motorized loading rollers for double-sided loading Cutting optimization program "Cutty" Quick clamping system of the saw blades with a pneumatic blocking device Laser straightening light at kerf Power supply: 400 V, 3 Ph, PE Weight approx. 4,700 kg

SPECIFICATIONS: Cutting length: max. 4500 mm Cutting width: max. 4300 mm Saw blade: Ø 400 mm (protrusion 115 mm) Scoring: Ø 200 mm Electronically adjustable clamps and sliders 7+4 Flexcut device (left) for optimized cutting 04 Front tables with compressed air curtain system (2500 x 600 mm) including fan (0.75 Kw)

Key data: 1 kW, 5000 kg, 11 kW

Working Dimensions 4200 x 4200 mm Cuttin Depth 75mm - Projection 90mm (18mm*4PCS) 11kW I 14.75 HP Main Saw Motor 1.5kW I 2 HP Scoring Saw Motor Pneumatic Controlled Saw Carriage Up/Down Movement 80m/min Saw Carriage Cutting Speed Max. Cutting Blade Diameter 380mm Max. Scoring Blade Diameter 200mm 8 Pcs Holder Quantity Air Floating Table (4 Pcs) - 1 Fixed, 3 Movable

Specifications: -cutting length 4500 mm -cutting depth 4300 mm -saw height above the table 105 mm -Max. trolley speed 30 m/min -pusher with 6 pneumatic clamps -3 x 1500 x 600 front shelves coated with bakelite -main saw fi 380 mm -saw motor 7.5 kW – weight 4400 kg -scoring motor 1.5 kW -current consumption 55 A -suction 2 x 120.1 x 150 mm -dimensions 7000 x 8200 x 1700 mm

Anthon panel sizing saw, year of construction 2000/01 Type Porta composed of: Roller conveyor, Longitudinal saw, Chipper left/right, Angle transfer, Parcel pusher, Drawer arms, Pusher tracks, Transfer table, Cross saws, Chipper left, Angle transfer, Roller conveyor Grenzebach Plattenstapeanlage Year of construction 1990/91 composed of: Roller conveyor, scissor lift, storage device, stacking device, chain conveyor on lifting platform, scissor lift, pallet insertion device, tongs transfer swivel device, chain conveyor, weighing device Waste disposal plant Holtec Vibrating Conveyor DS 500 - 11m Gössling Flat Belt Conveyors with Carriers Diemer ASC 50-25 LP-S, belt conveyor DB-A, secondary shredder DNZ 100-100

Key data: 1 kW, 3000 kg, 5 kW

- Cutting length 3200 mm - Cutting width 2850 mm - Cutting height max. 60 mm - Scoring unit - Angle ruler up to 1600 mm - Collets 5 pieces rigid - Stop jaws 2 pieces rigid - Trimming stops 3 pieces The machine is very well maintained and is sold from a company liquidation! Dismantling € 350,00 net! Available from January 2024!

It functions, it works properly, it keeps the dimension.

SCHEER saw fully functional, the entire control cabinet is invested, practically new, reliable, can be cut 5 panels at a time

PANHANS ECOPAN Working area 3200x3200 Saw with undercutter, 3 tables with air cushion Full technical documentation Cutting optimization program Opal First owner, machine in continuous operation very little used,

Horiontaler Round Table, probably unused - with bearing traces Bearing traces are easy to remove, Geraet fully ready for use without restrictions! Diameter 500mm Partial installation via sub-discs, indirect division Geraet immediately available. Special price

Daub Model: DV10 bun divider / rounder Serial: 62 Daub semi automatic bun divider rounder For dividing and rounding rolls, 36 divisions at a time, 3 phase, 3 moulding plates

Dough tub trolley NEW TW 14 "for the perfect long-term guidance" with 14 dough trays and lids 9.8 litre tub (max. 6 kgdough) Lid for special dough guidance /air guide Stainless steel car mobile

Tools of a groove drawing machine Stuhlmann With partial apparatus - residual stock tool Part apparatus of a groove drawing machine Stuhlmann, without tool cabinet! With residual stock of tools according to photos.

Rye bread divider. Weight range per piece: 0,4-1,2 kg; Capacity: 10-30 pcs/min ; Large hopper for 300 L; With 3000 mm conveyor and tin sensor; The divider is new. Client refused because of small amounts of dough.