british flag
Resale Logo

GEN used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used machine tools  ZOMA Maschinenhandel  http://www.zoma.de 
banner logo
start page > keywords GEN > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
7 8 9 10 11 12 13 14 <  page 15  > 16 17 18 19 20 21 22 23
125761666 104

DELTA LC - 400 for sale
Round Table Flat Grinding Machines


VERTICAL - rotary table surface GRINDERS DELTA LC - 400 14-10-062 delivery: immediately number: 14-10-062 manufacturer: DELTA type: LC - 400 MACHINE data year: approx. 1995 L x W x H: CA. 800 x 800 x 1800 mm weight:  ...
used machine
 
VERTICAL - rotary table surface GRINDERS DELTA LC - 400 14-10-062 delivery: immediately number: 14-10-062 manufacturer: DELTA type: LC - 400

MACHINE data year: approx. 1995 L x W x H: CA. 800 x 800 x 1800 mm weight: approximately 400 kg

Very good general condition specifications control: conventional loop scope: grinding diameter: approx. Ã? 400 mm grinding height: approx. 220 mm Magnetaufspannï¬?äche: approx. Ã? 400 mm grinding spindle: grinding wheel dimensions: approx. Ã? 200 x 80 x 78 mm spindle - D Speed: approximately 2840 RPM power: approx. 3,0 kW powered rotary table: 30 & 60 RPM Z - delivery: manual / automatic grinding movement: manual accessories â?¢ permanent - magnet â?¢ automatic Z - delivery â?¢ wet grinding device â?¢ Maschinenum housing â?¢ operating instructions â?¢ grinding wheels - protection â?¢ Cup grinding wheel â?¢ various wrenches accessories on request price and other specifications on request
1995
Price  
    request
125740315 1900

RENAULT MASTER X 70 M for sale
Van


Weight approx.: 1904 kgDimensions (l x w x h) approx.: 5888 x 1990 x 2718 mmDescription: Vehicle identification number VF1FDCMM527136325, Diesel engine RENAULT, 4 Cylinders, 2463 cc, Power 84 kw, Manual transmission, Fro ...
used machine
 
Weight approx.: 1904 kg
Dimensions (l x w x h) approx.: 5888 x 1990 x 2718 mm
Description: Vehicle identification number VF1FDCMM527136325, Diesel engine RENAULT, 4 Cylinders, 2463 cc, Power 84 kw, Manual transmission, Front wheel drive, Maximum speed 145 km/h, Max. Total weight 3500 kg, Dead weight 1904 kg, With lateral door, Drivers cabin with 3 seats, Radio, Mileage 369932 km, For more details see the photos, This van does not start because it has broken the starting motor, MOT (Technical Inspection of vehicles) costs will be paid by the buyer, The buyer is responsible for passing the general inspection in order to circulate in Spain, To transport this machine you need an appropriate truck with loading ramp, If you have to load it with a crane or use other means, an additional amount will be charged for this service
2002
used machinery auction RESALE 420 €  
  ES   request
125761661 103

DECKEL FP 3 for sale
Tool-Milling Machines


TOOL room milling machine cover FP 3 07-07-219 delivery time: immediate number: 07-07-219 manufacturer: lid type: FP 3 MACHINE data year: approximately 1978 L x W x H: approx. 2000 x 1600 x 1900 mm weight: approx. 150 ...
used machine
 
TOOL room milling machine cover FP 3 07-07-219 delivery time: immediate number: 07-07-219 manufacturer: lid type: FP 3

MACHINE data year: approximately 1978 L x W x H: approx. 2000 x 1600 x 1900 mm weight: approx. 1500 kg

Good general State technical data digital display: 3 - axes - digital display HEIDENHAIN VRZ 752 B procedures: X - axis: approx. 500 mm Y - axis: approx. 300 mm Z - axis: approx. 380 mm Tischaufspannï¬?äche (Tilt/Swivel table): 660 x 375 mm spindle: Drehzahlberei ch: approx. 40-2000 RPM spindle taper: ISO 40 power: approx. 3.8 of kW tool clamping: manual feed & express ducts: in all 3 axis feed range: approx. 10-500 mm / min rapid traverse: approx. 1.5 m / min accessories â?¢ vertical & horizontal - trimmer

â?¢ Angle milling head â?¢ drilling tailstock (stroke: approx. 120 mm) â?¢ coolant system â?¢ complete machine documentation â?¢ various wrenches â?¢ horizontal - spindle cover â?¢ safety handwheels â?¢ machine feet

Accessories on request.
Price and other specifications on request
1978
Price  
    request
125740079 1300

WIRTGEN - VÖGELE W130Fi for sale
WIRTGEN Road Milling Machine


Weight approx.: 20400 kgDimensions (l x w x h) approx.: 11000 x 3000 x 5000 mmDescription: 4000 working hours. Series No. 13100415. Engine power 224 kW. Max. weight 24550 Kg. Net weight 20400 Kg. Articulated chain W1/20. ...
used machine
 
Weight approx.: 20400 kg
Dimensions (l x w x h) approx.: 11000 x 3000 x 5000 mm
Description: 4000 working hours. Series No. 13100415. Engine power 224 kW. Max. weight 24550 Kg. Net weight 20400 Kg. Articulated chain W1/20. Milling width 1320 mm. Discharge tape
2014
used machinery auction RESALE 100,000 €  
  ES   request
125761658 107

STIERLI 120 SB DGS for sale
Bending Machines


ELECTRICAL CRIMPING press STIERLI 120 SB DGS - 01-99-037 delivery time: immediate number: 01-99-037 manufacturer: STIERLI type: 120 SB DGS MACHINE data year: approx. 1994 L x W x H: approx. 1100 x 700 x 1000 mm weight ...
used machine
 
ELECTRICAL CRIMPING press STIERLI 120 SB DGS - 01-99-037 delivery time: immediate number: 01-99-037 manufacturer: STIERLI type: 120 SB DGS

MACHINE data year: approx. 1994 L x W x H: approx. 1100 x 700 x 1000 mm weight: 420 kg

Good general condition specifications electric bending press / press control: conventional working pressure: approximately 12 tons maximum bending power: approx. 130 x 10 mm adjustable: approx. 0-170 mm stroke speed: approx. 600 mm / min working height: approx. 900 mm


Tool height: approx. 130 mm length gauge: approx. 600 mm power: approx. 1.5 kW accessories â?¢ instruction manual â?¢ stamping & dies and others
1 x set stamp 1 x bending stamp R1 1 x bending stamp R5 2 x die MW30 1 x matrix MW16 1 x die MW60 1 x matrix MW85

Accessories on request price and other specifications on request
1994
Price  
    request
125740283 102

TRAUB TNS 30 D for sale
CNC Lathe


Weight approx.: 4100 kgturning diameter: 140 mmturning length: 490 mmDimensions (l x w x h) approx.: 3500 x 2000 x 1100 mmnumber of places for driven tools: 12/24 rapid travel range: 15/16 m/mintool taper: VDI 30 total p ...

 
Weight approx.: 4100 kg
turning diameter: 140 mm
turning length: 490 mm
Dimensions (l x w x h) approx.: 3500 x 2000 x 1100 mm
number of places for driven tools: 12/24
rapid travel range: 15/16 m/min
tool taper: VDI 30
total power requirement: 34 kW
Description: TRAUB TNS 30 D CNC Lathe
Drehdurchmesser 140 mm, Drehlänge 490 mm, Spindeldurchmesser 30 mm, Spannfutterdurchmesser 140 mm, Stangendurchmesser 30 mm, Längsweg (Z-Achse) 220 mm, Transversale Strocke (X-Achse) 140 mm, Revolver 2, Reitstock, Werkzeugmagazin, Anzahl der Positionen Revolver 1, Innenkegeldurchmesser 1, Innenkegeldurchmesser VDI 30 mm, Innenkonus DIN 69880, Spindelgeschwindigkeiten stufenlos von 7 U / min bis 5600 U / min, Einspeisungen stufenlos längs von 1 mm / min bis zu 10000 mm / min , stufenlos transversal von 1 mm / min bis zu 10000 mm / min, Eilgang 15/16 m / min, Spannung 50 Hz 3x 380 Volt, Spindelmotor 16 kW, Gesamtleistungsbedarf 34 kW, Abmessungen 3500 x 2000 x 1100 mm, Gewicht: ca. 4100 kg
Further details see pictures
 
Price  
  BG   request
125761649 1517

MAFI 1160 for sale
Trailer mounted boom lifts


HEAVY duty - platform wagon MAFI 1160 - 27-01-204 delivery: immediately number: 27-01-204 manufacturer: MAFI type: 1160 MACHINE data year: approx. 2004 L x W x H: CA. 4000 x 2000 x 600 mm weight: approx. 2000 kg V ...
used machine
 
HEAVY duty - platform wagon MAFI 1160 - 27-01-204 delivery: immediately number: 27-01-204 manufacturer: MAFI type: 1160

MACHINE data year: approx. 2004 L x W x H: CA. 4000 x 2000 x 600 mm weight: approx. 2000 kg

Very good general condition specifications - heavy-duty platform truck suitable among others to the: transport of machines maximum load capacity: 10000 kg length (platform): approx. 4000 mm wide (platform): approx. 2000 mm height (deck): approx. 570 mm front axle can be steered: Achsl AST: 5000 kg rear axle steering: axle load: 5000 kg tires: Ã? 415/100-305 Ladeï¬?ächenbelag: 55 mm softwood accessories â?¢ front & rear axle can be steered (replaceable drawbar) â?¢ AC - drawbar â?¢ complete operating instructions accessories on request pre is and other specifications on request
2004
Price  
    request
125737679 107

BAD SALZUNGEN MHRE 250/2 for sale
Decoiler- and Straightening Machine


sheet width:250 mmcoil outside dia.:1400 mmweight max. in kg:1600 kgplate thickness:0,5 - 2 mmstraightening feed:5 - 30 m/mincoiler: expanding range:450 - 550 mmtotal power requirement:4,5 kWweight of the machine ca.:1,6 ...

 
sheet width:250 mm
coil outside dia.:1400 mm
weight max. in kg:1600 kg
plate thickness:0,5 - 2 mm
straightening feed:5 - 30 m/min
coiler: expanding range:450 - 550 mm
total power requirement:4,5 kW
weight of the machine ca.:1,6 t
dimensions of the machine ca.: m

 
Price  
    request
125761646 1108

JENBACHER J620GSE01 - 3000 KW for sale
gas engine


parting out for spares good standard crankshaft and block
used machine
 
parting out for spares
good standard crankshaft and block
2001
Price  
  BE   request
125735899 204

HEESEMANN KSA 8 + KSA 8u for sale
Wide belt sanding machine


Manufacturer: Heesemann, Type: KSA 8 + KSA 8u, Year: 2002, Control: Heesemann, Monting of the machine: Walze / Längs, Equipment of machine 2: Walze / Längs, Double sided sanding line: yes, Sanding width mm: 1600, Sandi ...
used machine
 
Manufacturer: Heesemann, Type: KSA 8 + KSA 8u, Year: 2002, Control: Heesemann, Monting of the machine: Walze / Längs, Equipment of machine 2: Walze / Längs, Double sided sanding line: yes, Sanding width mm: 1600, Sanding hight mm: 3-80, Number of sanding belts: 2 + 2, Sanding belt dimensions: 2620 x 1650, Werkstückdickenmesseinrichtung mittels Ultraschallsensor : no, Table hight adjustment by engine: no, Steel roller: 1 + 1, Band 1 Leistung kW : 55, Band 1 Schleifbandgeschwindigkeit m/s : 24, Band 2 Leistung kW : 26/31, Band 2 Schleifbandgeschwindigkeit m/s : 10 + 20, Belt 2 synchronous and reverse run: Gegenlauf, Band 3 Leistung kW : 55, Band 3 Schleifbandgeschwindigkeit m/s : 24, Band 4 Leistung kW : 26/31, Band 4 Schleifbandgeschwindigkeit m/s : 10 + 20, Elektronische Tastung mm: CSD, Frequency control of belts: no, Table hight adjustment by engine: no, Continous adjustable feeding speed m/min: 5 - 25, Year :2002
2002
Price  
    request
125761641 110

KALTENBACH WK 2 for sale
PORTAL CRANE


Crane KALTENBACH WK 2 27-01-203 delivery time: immediate number: 27-01-203 manufacturer: Kaltenbach type: WK 2 MACHINE data year: approx. 1988 L x W x H: CA. 3000 x 1000 x 3000 mm weight: approx. 2300 / 500 kg Ver ...
used machine
 
Crane KALTENBACH WK 2 27-01-203 delivery time: immediate number: 27-01-203 manufacturer: Kaltenbach type: WK 2

MACHINE data year: approx. 1988 L x W x H: CA. 3000 x 1000 x 3000 mm weight: approx. 2300 / 500 kg

Very good general condition ECHNICAL data workshop crane projection: approx. 2500 mm lifting height: approx. 2500 mm maximum payload: approx. 150 kg connection: 16 amp Swivel range of the boom: approx. 180 degrees accessories â?¢ electric chain hoist - load approx. 150 kg â?¢ emergency

Accessories on request price and other specifications on request
1988
Price  
    request
125730573 206

STAHL Plattenabmessungen 300 x 100 mm for sale


 
2,550 €  
  DE   request
125761637 110

WEIKA PK 2000 for sale
PORTAL CRANE


GANTRY crane WEIKA PK 2000 - 27-01-202-shipping time: immediately number: 27-01-202 manufacturer: Weika type: PK 2000 MACHINE data year: approx. 2018 L x W x H: CA. 3500 x 2000 x 3700 mm weight: approx. 1000 kg Ver ...

 
GANTRY crane WEIKA PK 2000 - 27-01-202-shipping time: immediately number: 27-01-202 manufacturer: Weika type: PK 2000

MACHINE data year: approx. 2018 L x W x H: CA. 3500 x 2000 x 3700 mm weight: approx. 1000 kg

Very good condition - like new the sale takes place under exclusion of liability. It is expressly pointed out that the crane is not TÃ?V approved and after installation / before first use must be checked by an expert. On the applicable law due to safety regulations and accident prevention regulations (DGUV provision cranes) we point out specifically.

TECHNICAL data gantry clearance: 3300 mm lifting height: approx. 2500 mm max load capacity: approx. 2000 kg connection: 16 amp accessories â?¢ electric chain hoist - lifting capacity 2000 kg â?¢ mobile on castors with brake â?¢ emergency - off accessories available on request GE price and other specifications on request
 
Price  
    request
125712645 1900

Autogenous Welding Machine


Weight approx.: 100 kgDimensions (l x w x h) approx.: 750 x 800 x 1650 mmDescription: The blowtorch is missing, For more details see the photos

 
Weight approx.: 100 kg
Dimensions (l x w x h) approx.: 750 x 800 x 1650 mm
Description: The blowtorch is missing, For more details see the photos
 
used machinery auction RESALE 50 €  
  ES   request
125761630 105

OPTIMUM Opti Saw S 131 GH for sale
Band Saws


used swing frame - metal band saw model year 2012 Description: -Metal band saw ideal for easy cutting. -Miter saws from - 45° to + 60 ° swiveling saw bracket -Circuit breaker for the belt cover and the saw band ...
used machine
 
used swing frame - metal band saw model year 2012

Description:

-Metal band saw ideal for easy cutting.
-Miter saws from - 45° to + 60 ° swiveling saw bracket
-Circuit breaker for the belt cover and the saw band coping in low-voltage design
-Separate emergency stop pushbutton
-24 V low voltage electronics
-Quiet running
-Ball bearing blade Guide
-Three levels of speed for a broad selection of materials
-Microswitch for automatic shut-off
-Legible scale for angle adjustment
-Saw band tension at the front via Handwheel adjustable
-Adjustable material stop for serial works
-Quick clamping Vice for fast workpiece clamping

Saw bar:
-Grey cast iron
-Both sides from - 45° to + 60 ° swivel

Machine Base:
-Mobile

2012
420 €  
    request
125712703 107

AJAN 2000 x 6000 for sale
CNC plasma cutting machine


Weight approx.: 8500 kgDimensions (l x w x h) approx.: 3500 x 13000 x 3200 mmDescription: with plasma and flame cutting head, working range: 2000 x 6000 mm, with plasma generator Ajan, BJ. 2013, model PP 260 A, CNC contr ...
used machine
 
Weight approx.: 8500 kg
Dimensions (l x w x h) approx.: 3500 x 13000 x 3200 mm
Description: with plasma and flame cutting head, working range: 2000 x 6000 mm, with plasma generator Ajan, BJ. 2013, model PP 260 A, CNC control, manual control panel, exhaust system Ajan BJ. 2013, serial no. EF13025, 5.5 KW, suction power 6000 m³ / h, Machine has already been dismantled and prepared for loading
2013
used machinery auction RESALE 25,500 €  
  DE   request
125761627 301

KLÖCKNER FERROMATIK F175 for sale
Injection molding machines


Klöckner Ferromatik F175 with pressure storage facility Hours of operation: 75400 Year of construction: 1983 Locking: to 175 Cbzlftci Screw diameter: 60 mm 3-core hitch general condition: good (such as seals cha ...
used machine
 
Klöckner Ferromatik F175
with pressure storage facility
Hours of operation: 75400
Year of construction: 1983
Locking: to 175
Cbzlftci
Screw diameter: 60 mm
3-core hitch
general condition: good (such as seals changed)
1983
Price  
    request
125712461 1900

Lot of Metal Baskets


Weight approx.: 150 kgDimensions (l x w x h) approx.: 1200 x 1000 x 1300 mmDescription: Approx. 196 pieces, For detergents or spices, Measures of each unit 480 x 160 x 120 mm

 
Weight approx.: 150 kg
Dimensions (l x w x h) approx.: 1200 x 1000 x 1300 mm
Description: Approx. 196 pieces, For detergents or spices, Measures of each unit 480 x 160 x 120 mm
 
used machinery auction RESALE 360 €  
  ES   request
125761625 107

PA 601 for sale
Profile Bending Machines


Electric profile bending machine PA 601 - 01-08-003-shipping time: immediately number: 01-08-003 manufacturer: electric profile bending machine type: PA 601 MACHINE data year: approx. 1979 L x W x H: 1500 x 1000 x 15 ...
used machine
 
Electric profile bending machine PA 601 - 01-08-003-shipping time: immediately number: 01-08-003 manufacturer: electric profile bending machine type: PA 601

MACHINE data year: approx. 1979 L x W x H: 1500 x 1000 x 1500 mm weight: approx. 400 kg

Good general condition specifications control: conventional maximum bending power (steel): approx. 180 x 30 mm maximum bending power (stainless steel): approx. 180 x 12 mm number of rollers: 3 piece bending: forward / backward rollers �: approx. 80 mm distance of the lower roller n: 100-750 mm spacing the upper roller: approx. 0-100 mm power: approx. 3,0 kW accessories � emergency - off � 2 x roller set (1 x smooth & 1 x Pro�le) accessories on request price and other specifications on request
1979
Price  
    request
125712549 1900

Lot of Hardware Fittings and Accessories for Kitch


Weight approx.: 700 kgDimensions (l x w x h) approx.: 4000 x 2400 x 1200 mmDescription: Consisting in accessories for interior of modules, 1 extractor hood PANDO, dish drainer racks, approx. 175 edge material rolls of di ...

 
Weight approx.: 700 kg
Dimensions (l x w x h) approx.: 4000 x 2400 x 1200 mm
Description: Consisting in accessories for interior of modules, 1 extractor hood PANDO, dish drainer racks, approx. 175 edge material rolls of different designs, etc., In the general view photographs may appear some items not included in this lot, The fittings and accessories included in this lot are those that appear in the detail photos, Representative items are displayed in this order: photograph of existing packaging / photography from manufacturer-reference / in some cases photo of the article, The shelves are not included, For more details see the photographs
 
used machinery auction RESALE 280 €  
  ES   request
<  page 15  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(3)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Get the latest machine offers by email: order newsletter