british flag
Resale Logo

GEN used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information injection moulding machinery  Pro-tech Kunststofftechnologie GmbH  http://www.protech-web.de 
banner logo
start page > keywords GEN > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
122226826 502

PAAL CPH 5140 for sale
Baling presses


Automatic baler Manufacturer: PAAL Type: CPH 5140 Year of manufacture: 2009 Technical data: Pressing force: 50 t Filler: 1.400 x 920 mm Channel size: 750 x 1.000 mm (H x W) Power: 22 kW ...
used machine
 
Automatic baler

Manufacturer: PAAL

Type: CPH 5140

Year of manufacture: 2009


Technical data:

Pressing force: 50 t

Filler: 1.400 x 920 mm

Channel size: 750 x 1.000 mm (H x W)

Power: 22 kW

Throughput: up to 115 m³/h


Technical description:

Machine design consisting of:

Pressure plate with bearing and down of internal roller,

Press box floor made of highly wear-resistant special steel,

replaceable, screwed Barrel Iron for the bottom plate rollers

Doors at the side in the press box with safety switch,

Press hopper in standard version,

end switch protected Plexiglas door in the press Hopper,

Bale length meter,

automatic three-sided channel adjustment,

Cutting system fliehendes hinterschliffenes, to the middle of the press channel

fully automatic, horizontal Verschnürung automati fresh wire drawing with driller with integrated wire cutting,

Synthetic resin top coat in light blue RAL 5012


Hydraulic system consisting of:

generously dimensioned hydraulic tank,

integrated hydraulic unit with built-in high pressure internal gear pump,

low-maintenance and low-line hydro logic block control,

Hydraulic oil warmer.

manual adjustment of channel pressure for different material types


Electrical control consisting of:

Control cabinet with control panel including wiring to the press,
electronic control with PLC Siemens S7-300,.

Operator panel for the Bale length measurement and extensive function display,.

two light barriers and various electronic limit switches,

Funktionsleuchtdioden solenoid valves,

potential-free contacts for operational readiness (automatic operation), sharing feeding, collective fault,.

Open wiring to prevent damage caused by rodents,

Safety shutdown for oil level and oil temperature,

Automatic pump shut-off after power demand,

Operating hour meter,

two-channel emergency-off system with relay for connecting an external security system


Additional equipment:

Automatic stamper

hydraulic channel adjustment with densitronic to the pressure adjustment for different material types

Bale chute made heavy profiles and sheet metal

Conveyor belt control at a constant speed
2009
Price  
    request
122226772 109

KOHNLE for sale
Endogas generator


Endogas Generator, make Kohnle yom: 2007 output: 50 Nm3/h needed gases natural gas, air, nitrogen (safety flushing) consumption: approx. 10 Nm3/h connected load: approx. 42 kVA with SBS heat exchanger.  ...

 
Endogas Generator, make Kohnle

yom: 2007
output: 50 Nm3/h
needed gases natural gas, air, nitrogen (safety flushing)
consumption: approx. 10 Nm3/h
connected load: approx. 42 kVA

with SBS heat exchanger.
 
Price  
    request
122226768 105

GBC INDUSTRY TOOLS Supercutter SC5 for sale
Circular Cold Saws


Description Brand GBC Model Supercutter SC5 ID 7086 Status Active Price 14.500 € + VAT Year of manufacture 2006 Location Sofia, Bulgaria Portable pipe-cutter, GBC Industry Italy SC5 Supercutter manufactured ...
used machine
 
Description

Brand GBC
Model Supercutter SC5
ID 7086
Status Active
Price 14.500 € + VAT
Year of manufacture 2006
Location Sofia, Bulgaria

Portable pipe-cutter, GBC Industry Italy SC5 Supercutter manufactured in 2006. Used for cutting and beveling pipes without heat. Has a diameter range between 762.00 mm and 914.00 mm and can cut through a max. thickness of 60 mm. Hydraulic motor has a power output of 15 hp.

The machine includes:

Main hinge frame in the range 30 "- 36;
Set of adjusting gripping jaws - 4;
Hydraulic motor;
Hydraulic station;
Chip collecting tube, kit with pressure oil tank and pump;
Combined blades for cutting and cornering with an angle
30 and 37.30 degrees.

Video: abcs://youtu.be/hg-A5x4TaSc

Manufacturers website: abc://abc.gbcindustrialtools.com/prodotti_en/pipe-cold-cutting-bevelling-machines-Supercutter.html

Price is negotiable. ExWorks Sofia, Bulgaria.


Contact

Tel.: +40-359/175.575
Fax: +40-259/426.248
Mobil: +40-743/177.040 ; +40-740/221.698

Technical inspection can be organized at least 24 hrs before the due date

We speak English. Wir sprechen Deutsch. (+40-740/221.698 )
Hablamos Español. Beszélünk magyarul. (+40-743/177.040 )

Irrtum, Anderungen und Zwischenverkauf vorbehalten /
Subject to errors, changes and prior sale /
Ne rezervam dreptul la greseli, modificari si vanzare prealabila.
2006
14,500 €  
  BG   request
122226767 107

AMADA PEGA 357 for sale
CNC Punching Machines


OVERVIEW: Brand: AMADA Model: PEGA 357 Application type: Punching Machine type: Turret Punching Machine Availability: Immediately Construction year: 1993 Production hours: 10914 Location: Poland Origin country: ...
used machine
 
OVERVIEW:
Brand: AMADA
Model: PEGA 357
Application type: Punching
Machine type: Turret Punching Machine
Availability: Immediately
Construction year: 1993
Production hours: 10914
Location: Poland
Origin country: Japan

GENERAL DATA:
Measurements width: 4700 mm
Measurements depth: 1800 mm
Measurements height: 2200 mm
Machine weight: 11600 kg

MAIN DRIVE:
Punching force: 300 kN
Maximum sheet thickness: 6 mm

CONTROL UNIT:
Brand: AMADA
Model: O4 PC

MOVEMENT:
X-AXIS movement: 1830 mm
Y-AXIS movement: 1270 mm

WORKPIECE:
Workpiece x: 3660 mm
Workpiece y: 1270 mm
Workpiece weight: 100 kg

MAX MATERIAL THICKNESS:
Steel: 6 mm

TOOLS:
No. of stations: 45
No. of index: 4

MEDIA:
Main electronic connection: 400 V / 50 Hz / 3 P
Power consumption: 18 kVA

ADDITIONAL EQUIPMENT:
1 - Tools
1993
Price  
  PL   request
122224679 109

HAMMER for sale
Endo gas generator


Endogas generator, make Gebr. Hammer yom: 2011 output: 50 - 100 Nm3/h pressure: 1,05 bar reaction gases: hydrogen ~40% carbon monoxide ~20% nitrogen ~40% dew point: 0...+15°C gas: natur ...
used machine
 
Endogas generator, make Gebr. Hammer

yom: 2011
output: 50 - 100 Nm3/h
pressure: 1,05 bar
reaction gases: hydrogen ~40%
carbon monoxide ~20%
nitrogen ~40%
dew point: 0...+15°C
gas: natural gas
consumption: 21 Nm3/h
electrical consumption: 50 kWh
connected load: 70 kVA

2011
Price  
    request
122224670 1101

CATERPILLAR 3306 for sale


2 PCs Caterpillar 3306 275 KVA generators. 23500 hours with €11,750.00 with 5300 hours €13,500.00 In good working condition.
used machine
 
2 PCs Caterpillar 3306 275 KVA generators.
23500 hours with €11,750.00
with 5300 hours €13,500.00
In good working condition.
1999
11,750 €  
  NL   request
122224641 401  

Stork Food & Dairy Syste Stork UHT Plant 6500 LPH for sale
Stork UHT Plant 6500 LPH


Stork UHT Plant 6500 LPH Item #: usm-0050 category: UHT Plant & Processing Status: Ready For Shipment Stork UHT Plant 6000 LPH Brand: Stork Food & Dairy Systems B.V. part of JBT Corporation Flowrate/Capacity: 650 ...

 

Stork UHT Plant 6500 LPH
Item #: usm-0050
category: UHT Plant & Processing
Status: Ready For Shipment
Stork UHT Plant 6000 LPH
Brand: Stork Food & Dairy Systems B.V. part of JBT Corporation
Flowrate/Capacity: 6500L/h
Sterilization temperature: 98oC to 142oC
Holding Time at maximum capacity: 4.87s
Homogenizer: Fully functional(Total pressure 250bar/ 2nd stage 50bar)
Deaerator: Unit is there but not operational
Control System: Semi-auto complete with PLC of Siemens S5
CIP system: Fully functional complete with acid and alkyle tanks

Condition: The plant is in good condition.
 
Price  
  PK   request
122224639 1800

MPO2 Sauerstoff Konzentrator for sale
Oxygen regulators


mPO2 oxygen concentrator, without accessories, crack in the housing (see picture), 624 hours of operation Sales commercial/dealer to our terms and conditions. Errors and spelling mistakes possible, subject to prior sa ...

 
mPO2 oxygen concentrator, without accessories, crack in the housing (see picture), 624 hours of operation

Sales commercial/dealer to our terms and conditions. Errors and spelling mistakes possible, subject to prior sale!

 
150 €  
    request
122224632 401  

TETRA PAK ???/8 development step 050V for sale
TBA 8 375ml Slim Line


TBA 8 375ml Slim Line Item #: usm-0052 category: Tetra Pak TBA 8 Status: Ready to Ship ?/8 development step 050V year of manufacturing 1989. At the beginning was 355ml and on 1994 was transformed to 375 ml and Pu ...
used machine
 

TBA 8 375ml Slim Line
Item #: usm-0052
category: Tetra Pak TBA 8
Status: Ready to Ship
?/8 development step 050V year of manufacturing 1989. At the beginning was 355ml and on 1994 was transformed to 375 ml and Pull tab 10 was implemented.
The machine also has Nitrogen Injection System
1989
Price  
  PK   request
122224626 401  

TETRA PAK UHT-Tetra Therm Aseptic Primo for sale
UHT-Tetra Therm Aseptic Primo


UHT-Tetra Therm Aseptic Primo Item #: usm-0057 category: UHT Plant & Processing Status: Ready For Shipment Tetra Pak UHT Plant For Sale: Tetra Therm Aseptic -Primo D4 (Tubular Type) Year of Manufacturing 2001 Capa ...
used machine
 
UHT-Tetra Therm Aseptic Primo
Item #: usm-0057
category: UHT Plant & Processing
Status: Ready For Shipment
Tetra Pak UHT Plant For Sale:
Tetra Therm Aseptic -Primo D4 (Tubular Type)
Year of Manufacturing 2001
Capacity 3600 LPH
Tetra Pak Alex 10 Homogeniser
Capacity 3600 LPH
Tetra Pak Degassing System
Condition: The condition of Plant is very good.
2001
Price  
  PK   request
122224623 1101

MWM (DEUTZ) TCG 2020V20 for sale
Gas generators


3 PIECES IN STOCK Engine Make MWM Engine Type TCG 2020 V20 Power KW 2000 KW Power Output 1983 KW RPM 1500 Fuel Natural Gas Generator Model Marelli MJH 630 LA4 Volts 10000  ...
new machine
 
3 PIECES IN STOCK

Engine Make MWM

Engine Type TCG 2020 V20

Power KW 2000 KW

Power Output 1983 KW

RPM 1500

Fuel Natural Gas

Generator Model Marelli MJH 630 LA4

Volts 10000

Hz 50

YOM 2017

Running Hours 0

You can call our language lines and speak to someone in one of the languages we support.
Tel: +31 (0)6-22497850 George Modderkolk / Manager ( Dutch, English )
+31 (0)6-38639071 Leon Hensen / Sales ( Dutch, English )
+31 (0)6-41383353 Fatih Ayyildiz / Sales ( Dutch, English, Turkish,Polish )

new
Price  
  NL   request
122224595 1102  

JENBACHER 208 for sale
Gas engines


Jenbacher 208 with Cabinet gas control line and SAM motor control Power 330 kw
used machine
 
Jenbacher 208 with Cabinet gas control line and SAM motor control
Power 330 kw
2000
17,000 €  
    request
122224583 1102

KUBOTA D1105 for sale
Diesel engines


Well-functioning used Kubota engine (diesel) type D1105 We have a large selection of new and used engines. Please contact us regarding pricing and availability.
used machine
 
Well-functioning used Kubota engine (diesel) type D1105

We have a large selection of new and used engines.
Please contact us regarding pricing and availability.
 
Price  
    request
122224579 1102

DEUTZ D2009L03 for sale
Diesel engines


New Deutz engine (diesel) type D2009L03 We have a large selection of new and used engines. Please contact us regarding pricing and availability.
new machine
 
New Deutz engine (diesel) type D2009L03

We have a large selection of new and used engines.
Please contact us regarding pricing and availability.
new
Price  
    request
122224575 1102

KUBOTA Z482-ES02 for sale
Diesel engines


Well-functioning used Kubota engine (diesel) type Z482 ES02 10 kW at 3600 RPM We have a large selection of new and used engines. Please contact us regarding pricing and availability.
used machine
 
Well-functioning used Kubota engine (diesel) type Z482 ES02

10 kW at 3600 RPM

We have a large selection of new and used engines.
Please contact us regarding pricing and availability.
 
Price  
    request
122224573 107

TRUMPF TC L 4030 - 3 kw for sale
Laser Cutting Machines


TECHNICAL DATA: Work area: 4,000 x 2,000 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 3,000 watts Maximum sheet thickness mild steel: 20 mm Maximum sheet thickness stainless steel: 12 mm Maximum sheet t ...
used machine
 
TECHNICAL DATA:

Work area: 4,000 x 2,000 x 115 mm
Control: Siemens Sinumerik 840 D
Laser power: 3,000 watts
Maximum sheet thickness mild steel: 20 mm
Maximum sheet thickness stainless steel: 12 mm
Maximum sheet thickness aluminium: 8 mm

STANDARD EQUIPMENT:

-Closed machine frame with integrated laser system - laser unit: CO2 laser, high-frequency excited, reflecting telescope, cooling unit - automatic pallet changer and longitudinal conveyor belt - drives: maintenance-free three-phase servomotors automatic Focus position adjustment of AutoLas plus - HI-LAS high pressure cutting - Plasmasensorik PMS - fast processing with SprintLas - ContourLas for making small holes cutting gas pressure setting programmable laser cutting head with 5 "lens and laser cutting head with 7.5 "lens cutting head quick change facility slides III - logbook function laser - automatic - lighting of workroom - control: open control on PC-based, easy to use and networking, online help, Diagnostics, maintenance logbook," Technology data, Teleservice, 3.5 "- floppy, BNC / RJ45 network connector-shop floor programming ToPs 100 lite - safety: Mehrstrahlige photoelectric beam guidance is fully encapsulated and ventilation, monitoring system, great exhaustion ()" 2150x1300x2700mm) and compact dust collector, cab - electrical equipment for three-phase 400 V / 50 Hz - finish: textured varnish white RAL 9002 / gentian blue RAL 5010 (errors and omissions in sale, prices, specifications and technical data vorbehal ten!)

2001
Price  
    request
122224569 1102

KUBOTA V2203 for sale
Diesel engines


Well-functioning used Kubota engine (diesel) type V2203 We have a large selection of new and used engines. Please contact us regarding pricing and availability.
used machine
 
Well-functioning used Kubota engine (diesel) type V2203

We have a large selection of new and used engines.
Please contact us regarding pricing and availability.
 
Price  
    request
122224567 1102

DEUTZ TCD2011L03 for sale
Diesel engines


New Deutz engine (diesel) type TCD2011L03 45 kW at 2300 RPM We have a large selection of new and used engines. Please contact us regarding pricing and availability.
new machine
 
New Deutz engine (diesel) type TCD2011L03

45 kW at 2300 RPM

We have a large selection of new and used engines.
Please contact us regarding pricing and availability.
new
Price  
    request
122224547 1108

Tank for diesel


Volume 1800 liters Made in Denmark in 1986 y
used machine
 
Volume 1800 liters
Made in Denmark in 1986 y
1986
399 €  
  LT   request
122224545 1108

Tank for diesel


Volume 1200 liters Made in Denmark in 1986 y
used machine
 
Volume 1200 liters
Made in Denmark in 1986 y
1986
299 €  
  LT   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Find used machinery dealers in your country