used GEBR JEHMLICH Cutting mills

Stock U2261-1 Second hand Jehmlich (Germany) model Record D carbon steel beat mill (universal mill). Unit has cast iron body and carbon steel beater-discs. Mill has stator and rotor with diameter 570 mm. Rotor is driven via belts by el. motor 22 kW, 2930 rpm, 380 V, 50 hz. Includes product feeder driven by separate el. motor. Technical documentation is not included.

MECHANICAL PAPER SCALE WITH HANDPROBE PUNCH M. No.: 618371 Equipment / Additional information: Mechanical Paper Scale Schiltknecht Switzerland F. No: 8351

grinding wheel diameter: 200 mm no. of working stations: 2 Stück turning speeds: 2800 U/min dimensions of grinding wheel: mm grinding motor: 0,55 kW shaft cross cut: 32x40 mm total power requirement: kW weight of the machine ca.: 250 kg dimensions of the machine ca.: 1 x 0,6 x 1,2 m - Swing table 420 x 220mm - on the side. Movement 40mm - infeed against grinding wheel 70mm - Degree of inclination 30 ° - Grinding guide grinding device - Inclination of the mounting bracket 20 ° - Adjustment of the mounting bracket 45 ° - Infeed against grinding wheel 80mm - Height adjustment 90mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working length: 4000mm, pressing force: 3000kN, distance between the columns: 3550mm, table width: 500mm, installation height: 460mm, connected load: 30kW, weight: 30t, with accessories and documentation.

weight max.: 5 t stroke: 7000 mm clamping width: 17508 mm Height: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Overhead traveling crane number: 94283910About usmore than 500 machines in the warehouse over 8500 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used machine in good condition. Available for immediate delivery. - Pressure force: 120 t - Bending length: 3.050 mm - Axes: 4

Steam generator, steam boiler, boiler stove used Manufacturer Gebr. Weißbach GmbH Year of construction 1993 Ab. Steam generation 1700 kg / h Ab. Pressure 6 bar Water capacity 3795 l zul Vorlauftemp. 165°C zul heat output 1.1 MW Dimensions: 4000 x 1900 x 2400 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Three-phase motor, electric motor -Voltage: 220 V -Power: 0.06 kW -Speed: 1600 rpm -Shaft: Ø 9 x 20 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 195/155/H155 mm -Weight: 4 kg

* General * SKU094F478 * LocationBarneveld * MakeGebr. Ruberg Maschinenfabrik Nieheim * TypeFCM-200 SR * No.171/11577 * Year of construction2001, Suitable for barrels dia. 582x1015mm * Main Features * MaterialStainless steel * Volume200 Ltr. * Motor7.5 KW * Specified Features - Cold mixer * MaterialStainless steel 1.4301 (304) * Cold mixerBatch barrel mixer (1x) * Vessel sizesdia. 650x400mm * With motor7,5 KW, 400/690 Volt * With lump breakercheck * With motor4,0 KW, 400/690 Volt * Information * Mounted on framecheck * With switchgearcheck * Floorspace2,1x1,5 M * Total height2,8 M * Weight2350 KGCold mixersGebr. RubergPlastic machinery > Cold mixersBrand > Gebr. Ruberg What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Nether ...

* General * SKU018X200 * LocationBarneveld * MakeGebr. Steimel * TypeTF-4/95 GDG * Main Features * MaterialMild steel * Volume9240 Ltr. * Motor2 KW * Specified Features - Rotary Lobe Pump * MaterialMild steel * Rotary Lobe Pumps * Capacity± 154 Ltr/Min * With motor2,0 KW, 230/400 Volt (Ex) * With variable speed drivecheck * Inletdia. 48 mm * Outletdia. 48 mm * Information * Mounted on framecheck * Mounted on wheelscheck * With switchcheck * Floorspace1,2x0,7 M * Total height1,3 M * Weight250 KG * ATEX compatiblecheckRotary Lobe PumpsGebr. SteimelPumps > Rotary Lobe PumpsBrand > Gebr. Steimel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Shell end mills, shell mill cutters, milling cutters, disc milling cutters, slot milling cutters -Disc milling cutter: 105 x 19 mm, cross-cut -Socket: Ø 27 mm -Weight: 0.8 kg

Working width: 820 mm rotor flight circle: Ø 720 mm drive: 90 kW cutting system: 8 cutting blades equipment: mechanical adjustment of the cutting gap Machine weight: 3500 kg

According to the description below

Working width: 2000 mm rotor flight circle: Ø 1000 mm drive: up to 315 kW cutting system: 40 piece cutting bars facilities: counter knife traverse pivoting hydraulically Right-left operation Hydraulic hood opening Screen: hydraulically extendible

Engine 2.2-3 kW 2 pieces of it

Granulator - Wittmann CM5 (3 pcs.) Location: Lodz, Poland Year of construction: 2011 Slow-moving granulator with gearbox Power: 1.1 kW 2 stator knives, 2 x pushers, rotor with the cutters Hopper inlet: 240x210 mm Grinding chamber opening: 240x116 mm Granulator without sieve, regulation of the grinding thickness by means of the hole adjustment between milling and stator knife Granule mill is used for grinding very hard details, waste - just like the crusher Hole for material case is prepared for connecting with suction conveyor All offered equipment is started by our service technicians before it is sold. It is possible to receive a video of the technical tests of the selected equipment or to participate in live technical tests at our company in Łódź. Price: On request

Granulator - Wanner D25.25m Location: Lodz, Poland Year of construction: 2007 Low-speed granulator with gearbox Power: 4 kW 4 stator knives, 12 rotor knives, the sieve - interchangeable Hopper inlet: 380x260 mm Grinding chamber opening: 270x200 mm It is very easy to clean the grinder, which is especially recommended if the color of the ground fabric is often changed Soundproofed mill All offered equipment is started by our service technicians before it is sold. It is possible to receive a video of the technical tests of the selected equipment or to participate in live technical tests at our company in Łódź. Price: On request

Stock - No. 2537 1 used,, functionally tested cutting mill/granulator Manufacturer: Alpine Hosokawa Type: RO 50 / 80 Built: 1993 Material feeding hopper: 500 x 840 mm Opening hydraulic Rotor diameter 500 mm x width 800 mm Rotor semi-open, 4 rotor V-cut - 2 Fixed blades Drive 55 kW Sieve diameter 10 mm Blower and Cyclone Throughput up to approx. 800 kg/h depending Material Machine is ready for demonstration from the Wuppertal plant, Date by appointment More granulators from stock ready to show, Ask for our current stock list or visit : plasticotrading

Stock # U2333-5 Used cutting mill by Alpine model B32/40 RO. Mill has dimensions of inlet into cutting chamber 400 mm x 355 mm. Rotor is equipped with three knives and has diameter 315 mm x length 400 mm. Working rotation of rotor up to 700 rpm. Mill has 3 static knives. Bottom discharge through screen with mesh about 12 mm. Rotor is belt driven by el. motor with power 18.5 kW, 1500 rpm, 400 V, 50 hz. Mill has stainless steel feeding hopper with inlet dimensions: 390 mm x 240 mm. Mill is equipped with two belt conveyers. First feeding material into mill, has width of belt 250 mm, with baffles each 675 mm. Working length of conveyer 290 cm. Top of conveyer is covered with insulation. Second conveyer is for transport product from mill discharge - also has working width 250 mm, with baffles each 675 mm. Working length 200 cm. Mill has also dust filter with exhaust fan and electric contro ...

Inlet: 1200 x 950 mm Rotor width: 1200 Rotor diameter: 800 Stator knife: 4 Rotor blade: 7 x 4

Cutting mills Drive with 4 New Knives Drive General Overhauled as a replacement for Getecha cutting mills . Pradler Machines Service Service for temperature control / cutting mills / drying

Cutting mill Manufacturer: NEUE HERBOLD Built: 2001 Drive: 7.5 kW for the grinding of foils: optional with roller feeder type EB 290 (drive 0.75 kW)

Used only for experiments.

Inlet opening: approx. 100 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: 350 mm Stator knife: 2 Rotor blade: 3 Drive: 30 kW Feed opening: approx. 100 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: 350 mm Stator knives: 2 Rotor knives: 3 Drive: 30 kW

Inlet opening: approx. 100 x 1000 mmm Rotor width: approx. 1000 mm Rotor diameter: 350 mm Stator knife: 2 Rotor blade: 3 Drive: 30 kW Feed opening: approx. 100 x 1000 mm Rotor width: 1000 mm Rotor diameter: 350 mm Stator knives: 2 Rotor knives: 3 Drive: 30 kW