british flag
Resale Logo

GAS used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used machine tools  AWM GmbH  http://www.agel-wurm.de 
banner logo
start page > keywords GAS > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
122256188 706

TETRA PACK TBA 19 - 200 ml base for sale


machine type: TBA/19, 330 SQ (the machine was modified to 200 ml base) year of manufacturing: 1998 capacity: approx. 7.000 packs/hour incl. straw applicator incl. Meurer foil shrinking machine incl. Meurer tray pack ...
used machine
 
machine type: TBA/19, 330 SQ (the machine was modified to 200 ml base)
year of manufacturing: 1998
capacity: approx. 7.000 packs/hour
incl. straw applicator
incl. Meurer foil shrinking machine
incl. Meurer tray packer

if desired:
We can also offer you the product treatment system with a capacity of approx. 14.000 ltr./hour (inclusive degassing system, 2 x plate heat exchangers, pipes, accessories etc.)
1998
Price  
    request
122226772 109

KOHNLE for sale
Endogas generator


Endogas Generator, make Kohnle yom: 2007 output: 50 Nm3/h needed gases natural gas, air, nitrogen (safety flushing) consumption: approx. 10 Nm3/h connected load: approx. 42 kVA with SBS heat exchanger.  ...

 
Endogas Generator, make Kohnle

yom: 2007
output: 50 Nm3/h
needed gases natural gas, air, nitrogen (safety flushing)
consumption: approx. 10 Nm3/h
connected load: approx. 42 kVA

with SBS heat exchanger.
 
Price  
    request
122224679 109

HAMMER for sale
Endo gas generator


Endogas generator, make Gebr. Hammer yom: 2011 output: 50 - 100 Nm3/h pressure: 1,05 bar reaction gases: hydrogen ~40% carbon monoxide ~20% nitrogen ~40% dew point: 0...+15°C gas: natur ...
used machine
 
Endogas generator, make Gebr. Hammer

yom: 2011
output: 50 - 100 Nm3/h
pressure: 1,05 bar
reaction gases: hydrogen ~40%
carbon monoxide ~20%
nitrogen ~40%
dew point: 0...+15°C
gas: natural gas
consumption: 21 Nm3/h
electrical consumption: 50 kWh
connected load: 70 kVA

2011
Price  
    request
122224626 401  

TETRA PAK UHT-Tetra Therm Aseptic Primo for sale
UHT-Tetra Therm Aseptic Primo


UHT-Tetra Therm Aseptic Primo Item #: usm-0057 category: UHT Plant & Processing Status: Ready For Shipment Tetra Pak UHT Plant For Sale: Tetra Therm Aseptic -Primo D4 (Tubular Type) Year of Manufacturing 2001 Capa ...
used machine
 
UHT-Tetra Therm Aseptic Primo
Item #: usm-0057
category: UHT Plant & Processing
Status: Ready For Shipment
Tetra Pak UHT Plant For Sale:
Tetra Therm Aseptic -Primo D4 (Tubular Type)
Year of Manufacturing 2001
Capacity 3600 LPH
Tetra Pak Alex 10 Homogeniser
Capacity 3600 LPH
Tetra Pak Degassing System
Condition: The condition of Plant is very good.
2001
Price  
  PK   request
122224623 1101

MWM (DEUTZ) TCG 2020V20 for sale
Gas generators


3 PIECES IN STOCK Engine Make MWM Engine Type TCG 2020 V20 Power KW 2000 KW Power Output 1983 KW RPM 1500 Fuel Natural Gas Generator Model Marelli MJH 630 LA4 Volts 10000  ...
new machine
 
3 PIECES IN STOCK

Engine Make MWM

Engine Type TCG 2020 V20

Power KW 2000 KW

Power Output 1983 KW

RPM 1500

Fuel Natural Gas

Generator Model Marelli MJH 630 LA4

Volts 10000

Hz 50

YOM 2017

Running Hours 0

You can call our language lines and speak to someone in one of the languages we support.
Tel: +31 (0)6-22497850 George Modderkolk / Manager ( Dutch, English )
+31 (0)6-38639071 Leon Hensen / Sales ( Dutch, English )
+31 (0)6-41383353 Fatih Ayyildiz / Sales ( Dutch, English, Turkish,Polish )

new
Price  
  NL   request
122224608 109

SAFED 12 Bd20/27 GP for sale
Conveyor Furnace


Operating temperature: 1150°C max., heating output: 45kW, conveyor width: 150mm, working height: 80mm, heating length with 6 seperat sections: 2700mm, protective gas consumption depending on type: 4-10m³/h, conveyor sp ...
used machine
 
Operating temperature: 1150°C max., heating output: 45kW, conveyor width: 150mm, working height: 80mm, heating length with 6 seperat sections: 2700mm, protective gas consumption depending on type: 4-10m³/h, conveyor speed: 2500mm/min, voltage: 3x400/230V.
1987
Price  
  DE   request
122224595 1102  

JENBACHER 208 for sale
Gas engines


Jenbacher 208 with Cabinet gas control line and SAM motor control Power 330 kw
used machine
 
Jenbacher 208 with Cabinet gas control line and SAM motor control
Power 330 kw
2000
17,000 €  
    request
122224573 107

TRUMPF TC L 4030 - 3 kw for sale
Laser Cutting Machines


TECHNICAL DATA: Work area: 4,000 x 2,000 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 3,000 watts Maximum sheet thickness mild steel: 20 mm Maximum sheet thickness stainless steel: 12 mm Maximum sheet t ...
used machine
 
TECHNICAL DATA:

Work area: 4,000 x 2,000 x 115 mm
Control: Siemens Sinumerik 840 D
Laser power: 3,000 watts
Maximum sheet thickness mild steel: 20 mm
Maximum sheet thickness stainless steel: 12 mm
Maximum sheet thickness aluminium: 8 mm

STANDARD EQUIPMENT:

-Closed machine frame with integrated laser system - laser unit: CO2 laser, high-frequency excited, reflecting telescope, cooling unit - automatic pallet changer and longitudinal conveyor belt - drives: maintenance-free three-phase servomotors automatic Focus position adjustment of AutoLas plus - HI-LAS high pressure cutting - Plasmasensorik PMS - fast processing with SprintLas - ContourLas for making small holes cutting gas pressure setting programmable laser cutting head with 5 "lens and laser cutting head with 7.5 "lens cutting head quick change facility slides III - logbook function laser - automatic - lighting of workroom - control: open control on PC-based, easy to use and networking, online help, Diagnostics, maintenance logbook," Technology data, Teleservice, 3.5 "- floppy, BNC / RJ45 network connector-shop floor programming ToPs 100 lite - safety: Mehrstrahlige photoelectric beam guidance is fully encapsulated and ventilation, monitoring system, great exhaustion ()" 2150x1300x2700mm) and compact dust collector, cab - electrical equipment for three-phase 400 V / 50 Hz - finish: textured varnish white RAL 9002 / gentian blue RAL 5010 (errors and omissions in sale, prices, specifications and technical data vorbehal ten!)

2001
Price  
    request
122224534 1403

5cbm Lagerbehälter + Zapfpumpe for sale
Home gas station, oil tank


5,000 litre storage containers According to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 500 with domed lid, is used, inside empty a ...

 
5,000 litre storage containers

According to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 500 with domed lid, is used, inside empty and professionally cleaned and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,.
1 sounding pipe provided with dip stick and sounding Rod seal,
1 vent pipe with vent hood,
1 new limit switch with type approval (AIII),
1 head and 1 spare socket for harvesting purposes,
1 optical leak display device with type approval and leak fluid.

The container is outside new primed and painted.
L = 2.80 m / D = 1.60 m / weight CA. 1.3 tons. / free charged ex works.

Description PTO pump:

Non calibratable type eco-box-55-
Capacity up to approx. 55 l / min. suitable for diesel fuel, incl.

-Automated fuel dispenser with PC software (up to 100 users) - 2 = ID system driver/vehicle - identification using transponder technology - USB interface for data retrieval - vane pump with single-phase motor - oval wheel meters with pulse transmitters, accuracy +/-0.5%
-4 m petrol pump hose DN 19 with design-resisting automatic nozzle, incl. swivel and tap hose holder - rugged powder-coated sheet-steel housing dimensions: approx. 550 x 470 x 340 mm
-two-line, backlit monochrome display, character height 8 or 19 mm - tank data memory for up to 2,000 tax records - menu guide in German, English and French

Magnetic key / transponder are additionally required.
 
Price  
    request
122196862 707

CONVOTHERM OGS20.10 for sale
Combi steamers


Product number: 1134 Type: OGS20.10 Serial number: GS6EI1222 Year of construction: 2008 Heating: natural gas, 40kW Power: 3x400V, 50Hz, 2.2kW Dimensions: 1000 x 950 x 1950 mm Including 4 trolleys with 20 tiers fo ...
used machine
 
Product number: 1134
Type: OGS20.10
Serial number: GS6EI1222
Year of construction: 2008
Heating: natural gas, 40kW
Power: 3x400V, 50Hz, 2.2kW
Dimensions: 1000 x 950 x 1950 mm
Including 4 trolleys with 20 tiers for GN 1/1
2008
Price  
  NL   request
122168526 505

VENTI OELDE for sale
Recycling units


consisting of: Sprühwäscher type remote access 800, flow 49,000 cubic meters / hour, capacity 74 kW, water circulation 100 cubic metres per hour; Hochleistungszykolon type HLZ-TS 1800, volume flow 40,000 cubic meters / ...
used machine
 
consisting of: Sprühwäscher type remote access 800, flow 49,000 cubic meters / hour, capacity 74 kW, water circulation 100 cubic metres per hour; Hochleistungszykolon type HLZ-TS 1800, volume flow 40,000 cubic meters / hour, diameter 1800 mm, thickness of the cyclone 10 mm â rotary valve type ZS 80-500 / 627, capacity 557 cubic meters / hour power 5.5 kW, inlet length inlet width 996 mm 496 mm, height 1,150 mm, degree of filling 55%; Support stand weight 11,500 kg, execution in screw design made of profile steel; Vacuum pipeline length 10000 mm with a deflection, thickness 6 mm â exhaust pipe length 17,000 mm, sheet thickness 4 mm; high-performance centrifugal fan type HRV 63S-900 / RG, flow 49,000 cubic meters / hour, gas temperature 20 ° C, fan speed 1,800 rpm,. Power 110 kW; Electric motor upper surface cooled make VEM, performance 132 kW; Blue smoke reduction system; Windsichter type WS 350, flow 69,000 cubic meters / hour, throughput of 35,000 kg / h, height 4.535 mm, 1000 mm x 800 mm; task sluice type AGS 800 x 800, length 1540 mm, width: 1,495 mm, height 900 mm, power 2,2 kW; Support structure for windsichter, weight 17,000 kg; High-performance cyclone type HLZ-TW-2360, flow 69,000 cubic metres / h, nominal diameter 2,360 mm, total height 11478 mm, weight 10.690 kg; Rotary valve type ZS 80-500/627, capacity 557 cubic meters / hour, filling ratio 55%, engine power 5.5 kW, inlet length 996 mm, inlet width 496 mm, height 1150 mm; high-performance centrifugal fan type HRV 63S-900 / K, flow 69,000 cubic meters / hour, gas temperature 20 ° C, fan speed 1.485 rpm, power 84.5 kW; Electric motor upper surface cooled make VEM, power 90 kW; Vacuum pipeline length 28.000 mm with four diversion; Trough belt conveyor length 16100 mm, width 1000 mm, power 11 kW; Vibrating chute size 5000 mm x 1200 mm, Fördermasse 40000 kg/HR; Parent band magnetic separator type OVBAB 80/60 N, length 2275 mm, height 520 mm, width 800 mm, capacity 3.2 kW, belt speed 1.3 m/s; Trough belt conveyor length 13500 mm, width 800 mm, power 5,5 kW; Trough belt conveyor length 12000 mm, width 800 mm, power 5,5 kW; various pre-separator; Control Chair with controls; Control cabin with control unit and control software; Medium voltage switch cabinet; Video system; Control and switch cabinet systems in magazine containers
2013
used machinery auction RESALE Price  
    request
122168482 107

AMADA FO 3015 MII RI mit Rohrachse for sale
CNC Laser Cutting Machines


Make: Amada Type: FO 3015 MII RI Construction year: 2013 Working range x-Y-Z: 3070 x 1550 x 200 mm Laser power: 4000 Watts Control: AMNC Hours of operation: 14000/5000 h Maximum sheet thickness: 20/12/10 mm Maxim ...
used machine
 
Make: Amada
Type: FO 3015 MII RI
Construction year: 2013
Working range x-Y-Z: 3070 x 1550 x 200 mm
Laser power: 4000 Watts
Control: AMNC
Hours of operation: 14000/5000 h
Maximum sheet thickness: 20/12/10 mm
Maximum workpiece weight: 750 kg
Maximum speed: 80/80/60 m / min
Length: 9903 mm
Width: 2778 mm
Height: 2220 mm
Weight: 9500 kg

Features
-Automatic detection of sheet metal storage
-Diode laser for positioning
-NC focus position control
-CO 2 laser unit with 4000 Watt laser power
-"Clean cut" oxide free high pressure cutting
-"Aluminum cut" function for safe cutting of aluminum
-Ray telescope to the laser beam optimization
-"Active cut" to compensate for the laser beam
-Laser power control (DR dross reduction =)
-WACS - capacitive Trimmerhead with 5.0 "and 7.5" cutting optics
-Linsenschnellwechselsystem
-Filter system package for cutting gases
-Beam power flushing
-Extractor and cooling block in combination
-Transformer
-Process way protection
-Laser safety cabin
-Nozzle changer

Automatic tube cutting device type RI
-Diameter: Round pipe = 19-220 mm / rectangular pipe = 19-150 mm
-Maximum length: 6000 mm
-Max weight: 200 kg
2013
Price  
    request
122168426 107

AMADA LC 3015 X1 NT for sale
CNC Laser Cutting Machines


Make: Amada Type: LC-3015 X 1 NT Year: 05/2006 Working range x-Y-Z: 3070 x 1550 x 200 mm Laser power: 4000 Watts Control: AMNC Maximum sheet thickness: 20/15/12 mm Maximum workpiece weight: 750 kg Maximum speed:  ...
used machine
 
Make: Amada
Type: LC-3015 X 1 NT
Year: 05/2006
Working range x-Y-Z: 3070 x 1550 x 200 mm
Laser power: 4000 Watts
Control: AMNC
Maximum sheet thickness: 20/15/12 mm
Maximum workpiece weight: 750 kg
Maximum speed: 80/80/60 m / min
Length: 9626 mm
Width: 2747 mm
Height: 2218 mm
Weight: 12600 kg

Features
-Automatic detection of sheet metal storage
-Diode laser for positioning
-NC focus position control
-CO 2 laser unit with 4000 Watt laser power
-"Clean cut" oxide free high pressure cutting
-"Aluminum cut" function for safe cutting of aluminum
-Ray telescope to the laser beam optimization
-"Active cut" to compensate for the laser beam
-Laser power control (DR dross reduction =)
-Oil spray
-Capacitive Trimmerhead with 5.0 "and 7.5" cutting optics
-Linsenschnellwechselsystem
-Filter system package for cutting gases
-3.5 "floppy disk drive
-Jet gang flush with nitrogen
-Exhaust system
-Cooling block
-Transformer
-Process way protection
-Laser safety cabin
2006
Price  
    request
122168199 107

AMADA LC 3015 X1 NT for sale
CNC Laser Cutting Machines


Make: Amada Type: LC-3015 X 1 NT Year of manufacture: 02/2008 Working range x-Y-Z: 3070 x 1550 x 200 mm Laser power: 4000 Watts Hours of operation: 56000/39500 h Maximum sheet thickness: 20/15/12 mm Maximum workpi ...
used machine
 
Make: Amada
Type: LC-3015 X 1 NT
Year of manufacture: 02/2008
Working range x-Y-Z: 3070 x 1550 x 200 mm
Laser power: 4000 Watts
Hours of operation: 56000/39500 h
Maximum sheet thickness: 20/15/12 mm
Maximum workpiece weight: 750 kg
Length: 9626 mm
Width: 2747 mm
Height: 2218 mm
Weight: 12600 kg

Features
-Automatic detection of sheet metal storage
-Diode laser for positioning
-NC focus position control
-CO 2 laser unit with 4000 Watt laser power
-"Clean cut" oxide free high pressure cutting
-"Aluminum cut" function for safe cutting of aluminum
-Ray telescope to the laser beam optimization
-"Active cut" to compensate for the laser beam
-Laser power control (DR dross reduction =)
-Oil spray
-Capacitive Trimmerhead with 5.0 "and 7.5" cutting optics
-Linsenschnellwechselsystem
-Filter system package for cutting gases
-3.5 "floppy disk drive
-Jet gang flush with nitrogen
-Exhaust system
-Cooling block
-Transformer
-Process way protection
-Laser safety cabin
2008
Price  
    request
122168195 107

BYSTRONIC ByStar 3015 for sale
CNC Laser Cutting Machines


Make: Bystronic Type: Bystar 3015 Year of construction: 2004 Working range x-Y: 3000 x 1500 mm Laser output: 4400 Watts Control: ByVision Hours of operation: 75000/33600/25500 Length ca: 10000 mm Width ca: 5500 m ...
used machine
 
Make: Bystronic
Type: Bystar 3015
Year of construction: 2004
Working range x-Y: 3000 x 1500 mm
Laser output: 4400 Watts
Control: ByVision
Hours of operation: 75000/33600/25500
Length ca: 10000 mm
Width ca: 5500 mm
Ca height: 2500 mm
Weight ca: 12000 kg

Machine equipment

Basic machine
-Bylaser CO2 with 4400 Watts with magnetic bearing Turbo centrifugal blower (compressor)
-Low laser gas consumption thanks to premix - only one cylinder
-Automatic change table system - cooling system
-Air-conditioned cabinet combination with CNC ByVision
-Router to the network connection and uninterruptible power supply (UPS)
-PSM power saving mode to reduce the power consumption in standby mode
-Compressed air Feinstfilteranlage for encapsulated beam going to ventilate, thus no
Nitrogen necessary
-Remote diagnosis module - control terminal with sensitive 15 "color touch screen
-CE compliant operator protection in the cutting area
-Programmable automatic switch-off, which defined the plant after a time
or disorder operation in the standby
-Manual control unit for easy positioning of all axes and to operate resonator
-Two cutting heads with quick release levers for high and low pressure applications
-Integrated collision check of the cutting head and the cutting nozzle
-Automatic and programmable nozzle cleaning
-Automatic non-contact sheet position recognition
-Cutting monitoring with CutControl
-Auto-technology select ATS
Cutting lens sensor CLS for the lens
-OCS output window monitoring
-Reflection absorber integrated in the resonator optics for the cutting of highly reflective
Materials
-Automatic focusing point Bypos
-RPP quick regulated pulsed piercing - interface for handling and Automation from Bystronic
-Safety device for a CE compliant operation
-Dust extraction unit including dust bag - and sound insulation kit
2004
Price  
    request
122168182 107

AMADA FO 3015 NT for sale
CNC Laser Cutting Machines


Make: Amada Type: FO 3015 NT Year of construction: 2005 Working range x-Y-Z: 3070 x 1550 x 200 mm Laser power: 4000 Watts Control: AMNC Hours of operation: 54000/33000/21000 h Maximum sheet thickness: 20/12/10 mm  ...
used machine
 
Make: Amada
Type: FO 3015 NT
Year of construction: 2005
Working range x-Y-Z: 3070 x 1550 x 200 mm
Laser power: 4000 Watts
Control: AMNC
Hours of operation: 54000/33000/21000 h
Maximum sheet thickness: 20/12/10 mm
Maximum workpiece weight: 750 kg
Maximum speed: 80/80/60 mm
Length: 9626 mm
Width: 2747 mm
Height: 2218 mm
Weight: 12600 kg

Features
-Automatic detection of sheet metal storage
-Diode laser for positioning
-NC focus position control
-CO 2 laser unit with 4000 Watt laser power
-"Clean cut" oxide free high pressure cutting
-"Aluminum cut" function for safe cutting of aluminum
-Ray telescope to the laser beam optimization
-"Active cut" to compensate for the laser beam
-Laser power control (DR dross reduction =)
-Oil spray
-Capacitive Trimmerhead with 5.0 "and 7.5" cutting optics
-Linsenschnellwechselsystem
-Filter system package for cutting gases
-3.5 "floppy disk drive
-Jet gang flush with nitrogen
-Exhaust system
-Cooling block
-Transformer
-Process way protection
-Laser safety cabin

Automation
ASLUL Tower
2005
Price  
    request
122135704 1101

PERKINS TESI 4008 Landfill Engine for sale
Gas generators


Perkins TESI 4008 Engine Year: 2005 Hours: 10,000 Capacity: 385 kWe Remote Radiator Motortech Controller Motortech Gas Air mixer Setup for Biogas and running on a Landfill Site Can be seen running This genset  ...

 

Perkins TESI 4008 Engine
Year: 2005
Hours: 10,000
Capacity: 385 kWe
Remote Radiator
Motortech Controller
Motortech Gas Air mixer
Setup for Biogas and running on a Landfill Site
Can be seen running
This genset is from 2005. It ran as an emergency backup until 2014 during which time it ran 10 hours. It was converted for landfill in 2015.
 
95,000 £  
  UK   request
122125449 109

ROHDE HWE 2400 SH electrical for sale
Hardening Furnaces, Shuttle Kiln


Condition: very good, checked -Innen: B x H x T: 1550 x 982 x 1525 mm -Volume: 2400 l -Siemens S7 touch panel, Jumo Imago 500 -incl. 1 stove unit -Electrical supply and exhaust air throttle control -Hydraulic lift ...
used machine
 
Condition: very good, checked
-Innen: B x H x T: 1550 x 982 x 1525 mm
-Volume: 2400 l
-Siemens S7 touch panel, Jumo Imago 500
-incl. 1 stove unit
-Electrical supply and exhaust air throttle control
-Hydraulic lift door
-Controlled ventilation fan
-Exhaust hood for connection to the exhaust duct
-in a semi protection gas version (according to sealed protective gas supply,)
-Total power: 190 kW
-Total power: 290 amp
-Supply voltage: 3N PE / AC 400V 50 Hz
-Maximum temperature Tmax: 1400 ° C
-Application temperature: 1360 ° C
-Load: 3 to
-incl. operating instructions and circuit diagram
2015
Price  
    request
122125299 107

TRUMPF TruMatic 6000 L - 1600 FMC for sale
Combination Machines


Make: Trump card Type: TruMatic 6000 L - 1600 FMC Year of construction: 2008 Maximum working range X-Y: 3085 x 1740 mm Laser power: 3200 Watts Control: Siemens Sinumerik 840 d Hours of operation: 28000/8000 (09/201 ...
used machine
 
Make: Trump card
Type: TruMatic 6000 L - 1600 FMC
Year of construction: 2008
Maximum working range X-Y: 3085 x 1740 mm
Laser power: 3200 Watts
Control: Siemens Sinumerik 840 d
Hours of operation: 28000/8000 (09/2017)
Punching power: 22 to
Positioning range combines: 2585 x 1650 mm
Positioning range laser operation: 3085 x 1650 mm
Positioning range punch operation: 3085 x 1740 mm
Maximum sheet thickness: 8 mm
Maximum punching diameter: 76.2 mm
Maximum workpiece weight: 230 kg
Max speed: 90/60/108 m / min
Number of tool stations: 18
Number of clamping claws: 3
Length: 7900 mm
Width: 9100 mm
Height: 2400 mm
Weight: 23500 kg

Standard equipment - sturdy C frame
-Coordinate guide with integrated linear magazine
-18 places for tools, 3 clamps
-Rotating tool holder
-Programmable holders with adjustable down holder force
-Automatic designation system with retainer
-2 automatic part slides for parts 500 x 500 mm
-Sensors for both part slides
-2 large part container
-Tool spray lubrication
-2 lubricant containers
-Punching slug extraction
-Chip bucket
-Emergency shut-down hydraulic
-Order table
-External control console
-TFT color display
-3.5 "floppy drive
-RJ45 network connector
-Laser TLF 3200
-HI-LAS high pressure cutting
-Cutting head quick change facility
-Laser cutting head with 5 "lens
-Laser cutting head with 7.5 "lens
-Programmable cutting gas selection/pressure adjustment
-Logbook function laser
-APC capacitive height control
-Programmable power cycles
-Slag cone detection
-ContourLas
-SprintLas
-Compact dust collector
-Safety equipment

Advanced facilities
-Laser TLF 3200
-AutoLas plus
-Function thread forming
Signing / fast beading
-Function soft punch
-Designation cylinder
-Vibration-damped installation
-Automatic switch-off
-Chip conveyor with tilt tray
-Scratch-poor editing
-Exhaust facility for small parts

Automation

TRL SheetMaster 1606
-Loading station with cow magnets
-Unloading loading platform
-Plate thickness gauge for double sheet control
-Cleaner plate module

Trumagrip 3000 x 1500
-Scissor lift table 400 mm
-Residual grids pliers with sensors

-Trumasort L4

2008
Price  
    request
122125293 107

TRUMPF TC 600 L - 1600 - 2400 Watt for sale
Combination Machines


Make: Trump card Type: TC 600 L - 1600 Year of manufacture: 03/2001 Maximum working range X-Y: 3085 x 1740 mm Laser power: 2400 watts Control: Siemens Sinumerik 840 d Hours of operation: 75079/74702/19805 (30.08.20 ...
used machine
 
Make: Trump card
Type: TC 600 L - 1600
Year of manufacture: 03/2001
Maximum working range X-Y: 3085 x 1740 mm
Laser power: 2400 watts
Control: Siemens Sinumerik 840 d
Hours of operation: 75079/74702/19805 (30.08.2017)
Punching power: 22 to
Positioning range combines: 2585 x 1650 mm
Positioning range laser operation: 3085 x 1650 mm
Stanzbetgrieb travel range: 3085 x 1740 mm
Maximum sheet thickness: 8 mm
Maximum punching diameter: 76.2 mm
Maximum workpiece weight: 230 kg
Max speed: 90/60/108 m / min
Number of tool stations: 17
Number of clamps: 4
Length: 7500 mm
Width: 8700 mm
Height: 2400 mm
: Weight 22500

Standard equipment
-Sturdy C frame
-Coordinate guide with integrated linear magazine
-Drives: Maintenance-free three-phase servomotors
-HI-LAS high pressure cutting
-Laser cutting head with 5 "lens
-Laser cutting head with 7.5 "lens
-Capacitive treble slides III
-Programmable cutting gas selection/pressure adjustment
-Slag cone detection
-Programmable power cycles
-ContourLas
-Logbook function laser
-Compact dust collection
-Rotating tool holder
-Automatic designation system with retainer
-Automatic tool changer with 18 stations
-3 clamps
-2 automatic part slides for parts of each 500 x 500 mm
-Sensor for both part slides
-2 parts crates
-Tool spray lubrication
-2 lubricant containers
-Punching slug extraction
-Chip bucket
-Emergency shut-down hydraulic
-Tank heater
-External control console
-3 drawers and shelf on the control panel
-Automatic switch-off
-Safety light barrier
-3.5 "floppy disk drive
-BNC and RJ45 network connector

Advanced facilities
-Laser TLF 2400 turbo
Multi tool control
-Function thread forming
-Function sign
-Soft punch
-Designation cylinder
-Vibration-damped installation
-Blow gun
-Bulge detection

Automation
-Preparation for retrofit automation

2001
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Find used machinery dealers in your country