We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
used
Machine complete with PC, RIP, etc.
used
platewriter Manufacturer: glunz&jensen Model: ICTP 2400 Pc + rip included year: 2010 Availability: in 2 weeks Defects: no Price: on request
used
Size: 609 x 767 mm Equipments: Machine complete with PC, RIP, etc.
used
TIG welding machine make JÄCKLE type TIG 301 i DCMash. -No: 50330909Max. Power consumption: 15 kVASetting range stepless TIG: 4 - 300 V.: Electrode: 10 - 240 ADuty cycle 50 (40)% TIG: 300 A / 22 V: Electrode: 240 A / 29.6 VDuty cycle 100 (80)% TIG: 220 A / 18.8 V: Electrode: 180 A / 27.2 VMains voltage 50/60 Hz: 400 VFuse: 20 A slowWeight approx: 65 kgDimensions: 1050 x 500 x 810 mmWith- water cooled- mobileused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
new
Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 30 i Supply voltage 1 x 230 volts Setting range 10 – 30 amps Duty cycle 35 % ED at 30 amps 60% ED at 25 amps 100% ED at 21 amps Current adjustment infinitely variable separation cut 10 mm quality cut 8 mm Cooling inverter by built-in fan Cooling burner compressed air-cooled, 50 ltr/min at 4.5 bar Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 480 x 165 x 290 mm Weight with burner 11 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 30 H, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece carrying case impact-resistant, waterproof 1 piece instruction manual Warranty 24 months from date of delivery List ...
new
Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 45 i Supply voltage 3 x 400 volts Adjustment range 10 – 45 amperes Duty cycle 80 % ED at 45 amps 100% ED at 40 amps Current adjustment infinitely variable separation cut 25 mm quality cut 12 mm Cooling inverter by built-in fan Cooling burner compressed air cooled at 90 ltr/min at 4.5 bar Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 470 x 180 x 230 mm Weight with burner 13 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 45 TT, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece carrying case impact-resistant, waterproof 1 piece instruction manual Warranty 24 months from date of delivery List price dire ...
new
Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 100 i Supply voltage 3 x 400 volts Adjustment range 30 – 100 amperes Duty cycle 50 % ED at 100 amps 100% ED at 80 amps Current adjustment infinitely variable separation cut 50 mm quality cut 35 mm Cooling inverter by built-in fan Cooling burner compressed air cooled Portable assembly system version Fuse 32 Ampere Dimensions L x W x H 560 x 265 x 400 mm Weight with burner 24 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 105 RTX, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece instruction manual Warranty 24 months from date of delivery List price directly ex works 3.020,00 € + VAT Price kpl. with above accessories 2.5 ...
used
Frigoscandia GCM 76 spiral chiller in beautiful condition. Large product gap (150mm). Has been chilling cooked soup product in European factory. Can be viewed 'in situ'.
used
Holtrop Jansma Suction Manufacturer: Holtrop Jansma Type: MSK300 Capacity: 6,000 m3/hr Year of construction: 2001 and 1999 Fan: ETD 300, 5.5 KW/1,500 rpm Explosion Pressure release: doors serve as pressure release in case of explosion Pressure measurement: Pressure gauge Cleaning: 0,09 KW/1500 KW Ruttelmotor Dimensions: 3.350*3.000*1.100 mm Scope of delivery: Filter system with built-in fan, control cabinet
used
Holtrop Jansma extraction system: dust filter, 4 fans, control cabinet, airlock, return air blower Type: ABFS Filter Filter surface: 230 m2 Filter capacity: 27,000 m3/hour Year of construction 1997 Ventilators: 2*EMDø250‐5.5 KW RMDø400‐11 KW ETDø450 15 KW ETDø300‐5,5 KW Additional extraction for the chipper with 5.5 KW Set up/installed in a 20" container. Filter system is complete with all accessories including air recirculation. Hacker details: Gross GAZ 62 Year of construction: 1995 Motor power: 18.5kW 30 knives 30x30x15/ EC 80 Sieve perforation 10/12mm All knives, as well as the sieve, were renewed 10/2023
used
Different types of TEM control system units, (VME32AI, A-IN 32-1, I/O 32-1, SERV 24/3-1, STEP 24/2-1, CM16DI, CM16DO, CM2AI, CMPS) Different types of DiaNe XT control system units, (Displays, CPU-s, I/O cards, etc) Engine control module for CAT gas Engines (CAT3516B) CAT ECM 348-2392-01 Different types of W ecs cards: (Analog input/output, digital input/output, power supplies, C-control units, D-control units, SM units, KD units, etc.) We have a lot more just contact us.
used
Holtrop Jansma Extraction with Kontainer Chip Disposal Type: MSK350S Year of construction: 1998 Type: overpressure filter system Intake manifolds: ø350 mm Capacity: 8,000 m3/hour Year of construction: 1998 Filter surface: 46 m2 Fan: ETD 350, 7.5 KW/1.500 tpm Star wheel chip disposal: 800 mm - Pressureless Chip disposal fan: EMD-200, 4 KW-300tpm, 45m3/uur Explosion Pressure Release: Doors serve as a pressure release in the event of an explosion Pressure Measurement: Pressure Dial Gauge Cleaning: 0.13 KW/1500 KW vibrating motor Air recovery: 500*500 mm with built-in flame protection damper Dimensions: 3,350*3,000*1,200 mm Scope of delivery: filter system with intake fan Fan, transport fan, control cabinet, air recovery with built-in flame protection flap
used
Holtrop Jansma-AFS clean air extraction with compressed air cleaning, auger discharge, rotary lock, chip fan, return air with summer/winter gate valve and fire protection device Type: OSFS 185 Year of construction: 2005 (2015 new turnstile and new control system) Clean air extraction Suction supports: ø700 mm + ø700 mm Length: 3,500 mm Width: 2,300 mm Height: 6,200 mm (onderbak 2,700 mm + bovenbak 2,700 mm + 800 mm fans) Capacity: 21,000 m3 /hour Chip fans: 2 * 15 kW, 380V, 56 Amp, 10,500 m3/uur, 3,000 tpm, 3,850 Pa, Type: RL E 550*130 Filter surface: 185 m2 Filter tubes: 150 stuks Length of filter tubes: 2,200 mm Diameter of filter tubes: 180 mm Cleaning: Compressed air cleaning Flame protection: Sprinkler installation with fire brigade connection Screw: HJ STH-380 12 tpm Turnlock: HJ ZRS-300, 31 tpm Hopper dimensions: 250*350 mm Transport fan: Connection dia ...
<br>NEW PIV GEAR IN YEAR 2006 6 HASPELN, MAX. L"NGE: 1400 MM, 70-800 GSM<br><br>Still in operation: No<br>Verf Gbar: immediately
used
<br>Machine completely over-recovered and repainted; Slitter Rewinder with pneumatic unwinding and winding gate, shaft, electrical lateral adjustment, working width 1320 mm, discharged diameter 1300 mm, core diameter 76 mm pneumatic brake Ortlinghaus, new upper and lower knives<br><br>Still in operation: Yes<br>
R23801/12 JAGENBERG Roller cutter Model: Vari Major Built: 1974 Width: 3,800 mm Materials: - coated paper, glossy and matte, grammage from 50 to 250 g/m2. max. speed: 1,500 m/min. for paper 250 g/m2 (The speed depends on the quality and grammage of the paper.) max. unwinding diameter: 2,500 mm max. winding diameter: 1,525 mm min. cutting width: 100 mm Number of upper knives: 6 Winder: 5 Single Winder max. roll width: 1,730 mm min. roll width: 450 mm max. unwinding diameter: 1,525 mm min. unwinding diameter: 300 mm 600 mm max. roll weight: 35 kN Available: immediately
used
Type: 62416, rotary wheel valve with pre-valve flat slider, drive via spur gear motor with 3 kW / 42 rpm. Little ran.
used
Inlet: 380 mm x 480 mm, wheel with upstream slide valve, driven by cylindrical gear drive with 3 kW / 42 RPM, only few funning hours.
used
<br>Working width: 1320 mm, outside diameter 1300 mm, inner diameter 70-155 mm, shaftless discharge discharge with lifting platform for nut rollers, upwinding with pneumatic extension shaft and mechanical device for finished rolling, lifting core inner diameter 76 mm, machine in production<br><br><br>br>
used
We offer wire looms asking for current offers. abc.steinfels-kg.de
used
Rolling milling machine Koepfer 153 A/CNC Manufacturer Jos. Koepfer & Söhne GmbH Type 153 A/CNC Built in 1988 Machine No. 153199 Technical data Largest Module 2 Distance workpiece tool axis max. 4- 87 mm max. workpiece diameter - without magazine 142 mm - with magazine 80 (100) mm max. milling length 150 mm max. length workpiece - without magazine 300 mm - with magazine 220 mm min. number of teeth 3 min. screw gait number 1 Main spindle through- 33 mm Hole Mounting hole for 50 mm Jig max. cutter diameter 70 mm max. cutter width - Universal milling head 63 mm - Shifting milling head 71 mm max. axial cutter shift - Universal milling head 40 mm - Shifting milling head 44 mm 35 Longitudinal feeds 0.1 -5.0 mm /WU 10 cutter speeds 210-1680 /min Control (2 axes) CNC Drive power 2.2 kW Weight approx. 2400 kg Available immediately Location ...
used
Hot counter/ hot display case with 5 bays 650x700 (GN2/1) and 2 glass doors front and rear for handling and removal. The display case is in a very good, cleaned and functional condition. Undertable also available on request, can also be used as Bain-Marie. Technical data: -External size: 980x870x1020mm. -Indoor size: 5x650x700mm. -elek. Voltage: 230V -Frequency: 50 Hz -elek. Power: 3.5kW. -Serial Number: 100010826
used
Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.
technical data: Make: Jansen Type: Jansen - Saw clamp Types No.: HS-NR. 11102 Purpose: suitable for OSS/E/I75 Dimensions: Tensioner 733 mm long