used FROMMIA Edge Grinding Machines

5-fold combined dressing and thicknessing machine, circular saw, milling machine and Slotted Hole Drilling Machine Frommia Type 261 UB Dressing, joining and thicknessing planers Planing width approx. 410 mm Planing thickness approx. 1- 185 mm Dressing table length approx. 1550 mm Thickness table length approx. 700 mm Knife shaft diameter 100 mm with 2 knives Speed of the knife shaft approx. 5200 rpm. 4 feed speeds approx. 5, 9, 12, 18 m/min. Motor approx. 4 kW Drill Drilling depth approx. 120 mm Slot length approx. 200 mm Height adjustment approx. 80 mm Table size approx. 180 x 320 mm Circular saw and milling combination Table size approx. 800 x 600 mm Diameter of saw blades 150 – 300 mm Max. cutting height approx. 95 mm Diameter of the saw shaft at the clamping part 20 mm Speed of the circular saw shaft approx. 3600 rpm. Motor power approx. 1.5 or 2.2 kW  ...

usable grinding wheel outer Ø: 600 mm Table size: 470 x 950 mm Table tiltable down/up to: 45/30° Table height above corridor: 950 mm Grinding wheel speed: 940 rpm Grinding wheel drive: 380 V, 940/1140 rpm, 2.2/2.5 kW Weight: 237 kg

usable grinding wheel outer Ø: 600 mm Table size: 470 x 950 mm Table tiltable down/up to: 45/30° Table height above corridor: 950 mm Grinding wheel speed: 940 rpm Grinding wheel drive: 380 V, 940/1140 rpm, 2.2/2.5 kW Weight: 237 kg

Technical data will follow shortly, Technical specifications: on demand

Circular saw Frommia 630 Length 1.20 m Width 1 m Height 1 m Attack Roller table Saw blade

Description: Machine number: 2867/1119 Table dimensions: 850 x 700 mm Saw blade can be tilted 45° Incl. mobile extraction system from the manufacturer SPÄNEX Approx. Onsite Dimension. (l x w x h): 4,000 x 1,500 x 2,400 mm, weight approx.: 300 kg

Welding edge former, edge former, edge chamfering machine TRUMPF chamfers of steel plates for weld seam preparation type TKF 103 Sheet thickness: 4 - 25 mm Bevel length max: 10mm Bevel angle: 30 Power: 2000 Watt Mains connection: 220 Volt, 50 Hz - equipped with guide bracket for 30 bevel angles - regrindable butt steel for high tool utilization - several impact steels - Support plates 6, 8, 10, 12, 14, 16, 18, 20, 22 mm for different material thicknesses For bevelling straight and curved edges with at least 40 mm radius. For bevelling edges on flat and curved workpieces as well as tubes with an inner diameter of at least 80 mm. Weight: 14 kg; used

Edge magazine for edge banders -Spaces for edges: 5 pieces -Max. Edge width: 60 mm -freestanding -Dimensions: 900/530/H1030 mm -Weight: 208 kg

Edge closure for edge banders, edge banding machines -Manufacturer: Homag -for: 2x different edges -Number: 1x edge closure available -Price: per piece -Dimensions: 670/360/H350 mm -Weight: 43 kg/piece

Weld edge former INDUMASCH SIEGEN Type V 12 Masch. No.: 50674 Year of construction 1992 Material thickness max. 40 mm Bevel angle 45 Working speed approx. 3 m/min. Motor power 2 kW Mains connection 400 volts, 50 Hz - Flow / return - Built-in guide roller for bevel angle 45 - Belt guard missing Dimensions L x W x H 650 x 600 x 650 mm Weight 75 kg good condition; used

Work table: 750 x 290 mm, table height: 185 mm band length: 2600 mm strap width: 150 mm abrasive belt rear: 850 x 200 mm grinding unit swiveling: 90°-45° belt speed: 20 m / sec. Additional table: 330 x 330 mm oscillation stroke: 20 mm Oszilationsmotor: 0.25 (0.34 kW) suction connection Ø: 120 mm motor power output S1 100%: 3.0 kW (4,0 PS) motor power S6 40%: 4,5 kW (6.0 HP) voltage: 400 V machine dimensions (W x D x H): 1700 x 700 x 1080 mm weight approx.: 180 kg

Universal cylindrical grinding machine Incl. internal grinding deviceTip height: 160 mm. Grinding length: approx. 500 mm. Headstock holder: MK 4 Coolant system, various grinding wheels and documentation. Unfortunately without a tailstock. Dimensions, LxDxH: approx. 1800 x 1200 x 1700 mm. Weight: approx. 2000 Kg. Neat ready for use condition. The machine can be inspected and demonstrated under power by arrangement and is immediately available.

Edges and facets grinding machine. Grinding angle: 45 degrees. Support table area: 100 x 320 mm Power supply: 380 Vol, 16 Amp. Incl. substructure with dust extraction, the extraction hose is unfortunately missing., 2 pieces of new compartments - sanding pad, diameter: 165 mm. Working height: approx. 105 cm. Weight: approx. 80 kg. Good operational condition. The machine can be inspected and demonstrated under power by arrangement and is immediately available.

- Exhibition machine - relief rollers on the stop rulers, with swivel grinding unit, and oscillating sanding belt, veneer grinding device, oscillation with separate motor, height-adjustable sanding table, extendable roller table extension, rubberized sanding roller ---------- Technical data ---------- sanding belt dimensions: 3,000 x 200 mm, work table dimensions: 960 x 350 mm, work table height adjustment: 230 mm, Grinding surface: 1,050 x 300 mm, belt speed: 20 m/sec., oscillation stroke: 20 mm, extraction nozzle: 140 mm, motor 400 V: 4.0 hp / 3.0 kW, dimensions (LxWxH): 1,900 x 900 x 1,350 mm, weight: 290 kg new exhibition machine

- Exhibition machine - with swivel grinding unit, and oscillating sanding belt ---------- Technical Data ---------- Swivel range of grinding unit: 45 , Sanding belt width: 150 mm, Sanding belt length: 2,600 mm, Work table dimensions: 750 x 300 mm, Height adjustment range: 200 mm, Belt speed: 20 m/sec., Oscillation stroke: 20 mm, Suction nozzle: 140 mm, Motor 400 V: 4.0 hp / 3.0 kW, Motor oscillation: 0.34 hp / 0.25 kW, Dimensions (LxWxH): 1,600 x 850 x 1,350 mm, weight: 215 kg - Special price - new exhibition machine

equipped with: -2 milling units -1 long belt sanding unit -3 buffing units/profile grinding units

Max. glass dimensions: 2000x3000mm, number of spindles: 8, glass thickness: 3-28mm, length: 6500mm, width: 1600mm, height: 2600mm, weight: 3.2t.

Edge grinding machine with rinsing device, wet grinding machine PAGUS grinding wheel: Ø 200 mm grinding wheel height adjustable, travel: 50 mm grinding angle: 45° grinding table pneumatically movable, travel: 630 mm motor: VEM K21R80K2 0,75 kW 2795 - 2895 rpm 230 / 400 V used, tested ! Dimensions: 1500 x 1000 x 1560 mm

Oscillation: ja ja / nein : ja ja/nein : ja ja/nein tiltable up to: Grad Motor output: 3,0 kW Table dimensions: mm sanding width: 200 mm Weight: 290 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with: copier -Number: 1x grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Sanding head in thickness: adjustable -Max. Workpiece thickness: mm -Max. Corner radius: mm -Dimensions: 1200/1420/H1520 mm -Weight: 656 kg

Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with copier -2x: milling heads -Power: 1.5 kW -Speed: 3000-6000 rpm -1x: grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Milling and grinding heads in thickness: adjustable -Max. Workpiece thickness: 40 mm -Max. Corner radius: 40 mm -Dimensions: 1200/1600/H1520 mm -Weight: 782 kg

Description: Technical details x-travel 250 - 500 mm Sheet thickness 2 mm Workpiece width 0 - 3 mm Approx. Onsite Dimension. (l x w x h): 800 x 500 x 1,400 mm, weight approx.: 150 kg

For sale is the SCHIATTI edger, model FPS 10, built in 2009 in very good condition, with only 20,700 meters !

Edge grinding with oscillation and veneer sanding WEIBERT new WJ-KS30 400V 3 KW (4 HP) n = 2840 RPM Work table 960 x 350 mm Table height 230 mm Belt rear 1050 x 200 mm Belt speed 20 m / sec Oscillation stroke 20 mm Oscillation motor 0.25 KW (0.34 PS) A/can be switched off Machine table and guides made of grey cast iron Quick adjustment of tilting 90 °-45 ° with degree display Weight 400 kg Dust nozzle 120 mm Rollers pull-out extension table Band width 150 mm WJ-R00200 option: Band width 200 mm WJ R00300

Wood strength KSO 1500 Edge sanding machine with swiveling grinding unit oscillating belt 2260 x 150 mm belt Contact surface 770 x 150 mm Belt speed 16 m / sec. Cast iron table size 680 x 310 mm Engine power: 400 V 50 Hz 1, 5kW 2 suction nozzle with diameter 100 mm Weight 162 kg G & pieces 5368150SET