used FRITZ WERNER Engine Lathes Sliding Surfacing And Screw Cutting Lathes

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 0.5 kW -Speed: 3200/5200 rpm -grinding wheels: max. Ø 180 mm -Operating voltage: 380 volts -Dimensions: 500/500/H1550 mm -Weight: 170 kg

Horizontal fraesing machine with swivel vertical frescent head (3510.3), table 315 x 1000 mm, x/y/z = 710/260/420 mm, Sk 40, speed range 45-2000 rpm, feed range 16-800 mm/min, eilgaenge 4 m/min, weight approx. 1.5 t

centre height: mm weight: 160 kg chucking diameter: 250 mm swiveling dividing head with three-jaw chuck from Forkardt F250 Chuck diameter: 250 mm Total weight: 160 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

wheel diameter: 900 mm depth: 900 mm width: 940 mm height: 1.050 mm Disc-Ø: 900 mm Depth: 900 mm Height: 1.050 mm Width: 940 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

No. 5100: 1 gebr. Vertical milling machine Fabr. FRITZ WERNER, type FV 2

SPLINE SHAFT GRINDER Make: Fritz Werner Model: 3.275 Grinding length: 1600mm Center Height: 300mm Workpiece max diameter: 600mm Table length: 2500mm Table width: 180mm Other Info: THE MACHINE IS IN EXCELLENT CONDITIONS AND COMPLETE IN ALL ITS PARTS and ACCESSORIES.

Without documentation, with accessories, the automatic feed is defective.

Tailstock, counter bearing for dividing head, dividing attachment -Height: adjustable -Recording: top -Dimensions: 245/280/H200 mm -Weight: 28 kg

Universal milling angle head, milling angle head -Take: SK 50 -Flange holder outside diameter: 380 mm -Mounting hole circle: 320 mm -Admission drive diameter: 60 mm -swiveling -Quill stroke: 65 mm -Dimensions: 450/400/H700 mm -Weight: 170 kg

MAX DIAMETER 200 MAX LENGHT 2500

Description: Rotation speed range: 45 - 2000 rpm With swiveling milling head Table dimensions: approx. 1000 x 315 mm Attention: the hydraulic machine vice is not included in the scope of delivery and purchase weight approx.: 1,800 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 2,000 x 2,000 mm

Description: Additional information: Shaft vice + prism, - ideal for drilling and simple milling work, - can be used in horizontal and vertical positions, - V-block and jaw inserts hardened and ground, robust cast iron design, technical details: jaw width 110 mm, quantity 1 piece Approx. Onsite Dimension. (l x w x h): 250 x 200 x 180 mm, weight approx.: 30 kg

Article number: 07-99-001 Manufacturer: Fritz Werner Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1980 L x W x H: approx. 1900x1800x1800mm Weight: approx. 1200kg Travel: X-axis: approx. 600mm Y-axis: approx. 200mm Z-axis: approx. 500mm Table clamping surface: approx. 740x220mm Spindle: Speed range: approx. 3000rpm Drive power: approx. 7.5kW Feeds & rapid traverses: in all 3 axes Max. milling area (dovetail): approx. 400mm width Swivel range 1st & 3rd milling spindle: approx. 50-80 degrees Height adjustment 1st & 3rd milling spindle: approx. 80mm Height adjustment 2nd milling spindle: approx. 50mm Accessories  Left/Clockwise  Mechanical vise  10 pieces of various milling head attachments  Work light Other accessories on request Price and other technical data on request

grinding length: 1600 mm centre height: 185 mm diamter spiral cutter: 55mm mm indexing: 4-32 Modul length: 5900 mm width: 2300 mm height: 2000 mm weight: 7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 40 mm, 40 , 600 U/min

Material: PE, PP, PS, ABS, Year of construction: 2000 Capacity: approx. 100 – 300 kg/h Screw diameter: 2 x Ø 40.0 mm L/D: 40:1 Propulsion: 110 kW (DC) more details: synchronous, degassing with vacuum pump, screws and cylinders segmented, Strand nozzle, water bath, strand granulator. NEW control cabinet for heating and motor control (Siemens S7, touch screen) Optional: Side loading

* General * SKU231U195 * LocationBarneveld * MakeWerner & Pfleiderer * TypeZSK 50 MCC * Mach.No.64012350 * Sizes * Screw diameter40 mm * Main Features * Motor181 KW * Inlet diameter165 mm * L/D54 * Specified Features - Double screw extruder * Double screw extrudercheck * Number of hours34432 * Screw diameter40 mm * L/D54 * Co-rotatingcheck * Number of heating zones:10 * Electric heatingcheck * Water coolingcheck * DC-motor0,79-181 kW 470 Volt * Screw speed4-920-1056 rpm * Feeding with hoppercheck (165x130 mm) * Feeding with metering screwcheck (Werner&Pfileiderer, type: ZS-B 58, motor: 5-6 kW, 400 Volt, max. 400 rpm) * Exchangeable segmentscheck * Number of temperature controllers:10 * Capacity200-400 kg/h * MaterialFerritic stainless steel 1.4113, Mild steel, Nitriding Steel 1.8550 * Information * Year of construction2000 * With switchgearcheck * Total height0,73 m * CEcheck * Floorspac ...

* General * SKU354T968 * LocationBarneveld * MakeWerner & PFleiderer * TypeContinua 37/27 D * Mach.No.220331 * Sizes * Screw diameter37 mm * Main Features * Motor7.6 KW * L/D27 * Specified Features - Double screw extruder * Double screw extrudercheck * Number of hours284222 * Screw diameter37 mm * L/D27 * Co-rotatingcheck * Number of heating zones:5: 1 cooling: 4 heating * Steam heatingcheck * DC-motor7,6 kW 440 Volt * With variable speed drivecheck * Screw speed0-400 rpm * Exchangeable segmentscheck * Number of temperature controllers:5 * MaterialMild steel * Information * Year of construction1985 * With switchgearcheck (as is) * Total height2,3 m * Floorspace3,2x1,3 m * Weight1700 kg * Extra Specificationswith extra screwsDouble screw extrudersWerner & PfleidererExtruders > Double screw extrudersBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condit ...

* General * SKU095Y843 * LocationBarneveld * MakeWerner & Pfleiderer * TypeZSK-170 W-1750 5G * Mach.No.221 071 * Main Features * Motor760 KW * Inlet diameter170 mm * L/D14 * Specified Features - Double screw extruder * Double screw extruder(1x) * Screw diameter170mm, Screw length 2500mm * L/D14,7 * Co-rotatingcheck * Electric heatingon housing no. 2, 3, 4 en 5 (65,8 KW) * DC-motor760 KW, 6000 Volt * Screw speed± 198 Rpm * Used onDMD * Information * Year of construction1986 * Without switchgearcheck * Floorspace14,0x4,0 M * Weight21.000 KG * Extra Specifications :- Barrel material 1.8519, screw material 1.2344 Double screw extrudersWerner & PfleidererExtruders > Double screw extrudersBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to  ...

Key data: 172 mm

We offer directly on behalf of the owner : Twin-screw extruder Make : COPERION ( Werner & Pfleiderer ) Gearbox make : P.I.V Type : ZSK 170 W 1920/1750 Year of construction : 2021 / 2002 / 1986 Screw diameter : 172 mm Screw speed : 4,9 - 49 min-1 Max. torque : 17,500 Nm Main engine : 216 kW In the last 3 years, a total of over €420,000 has been invested in new components and factory overhauls (some of which were previously unused) The extruder was in use until Aug / 2023 and has already been dismantled ready for transport. The components are partly redundant and date from the years 1986 - 2021. The scope of delivery consists of : Twin screw degassing Coperion DSE 180 - 1 x year of manufacture 2021 ( 180 t€ ) Main gearbox P.I.V - 1 x year of manufacture 2002, factory overhauled ( 233 t€ ) in 2021, unused - 1 x year of manufacture 1986, factory o ...

Werner & Pfleiderer Multimatic Head Machine 4-row used immediately available in the warehouse. Type: Multimatic 4-row Stand machine the machine is in the baker's condition Built in 1993 380 Volt

Dough Divider And Rounder Tewimat S 4 * Year of construction: 2011 (model with new execution of the moulding belt including pneumatic tensioning) * Exchangeable measuring unit 4 rows * Incl. pistons for several weigh ranges: 60 bis 120 g / 130 bis 220 g / 220 bis 310 g * Dough hopper for 100 to 120 kg of dough * Spreading finger belts aprox. 900 mm long, 4 rows, with adjustable drive * External and separate switch cabinet with PLC from Siemens S7 * Touchscreen OP 7 from Siemens (multi lingual execution) * Flour duster for the rounding belt, coming with its own adjustable drive, can be moved to the side for cleaning purposes

Basic refurbished Parta U II Cladding sheets new made of stainless steel All wear parts are renewed, Machine is completely rebuilt, Chamber and rotary vane correspond to a new machine, incl. 2 Mehler/ Or Öler Conveyor belt right/left defined position stop stepless speed control Warranty 6 months Suitable for different doughs Weight ranges: 1 chamber 300-2800gr 2 Chamber 110-1250gr Optional: Drop wave Large funnel etc Machine can be tested with dough at any time Delivery and commissioning as well as training possible.

Material: stainless steel Engine: 22 kW Content: 680 ltr. Vat tiltable. Good condition. ********** Are you looking for something else? Write us below! WE PROJECT AND BUILD YOUR ENTIRE PLANT EXACTLY FOR YOUR NEEDS FROM USED AND NEW MACHINES.

1 x Werner & Pfleiderer 400mm dia dump extruder, Type: EAE400, Fabrik nr 221284, Werk nr 416295, Year: 1985, double hydraulic crammer feed, feed section 965mm wide, L/D ratio 8:1, with 235kW DC variable speed motor, Sheeting head to produce up to 1000mm wide sheet. Complete with controls and hydraulics etc.

Basic-outdated 5 reihige Multimatik machine was dismantled and built up anew. all wearing parts renews. chamber completely reworks. measuring pistons anew new tapes chains etc. electrical system anew new plastic funnel machine can be pursued only or with fermenting cupboard. taking back old machine possibly more pictures on inquiry