british flag
Resale Logo

Frequency used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information auctioneer  Eddisons  http://www.eddisons.com 
banner logo
start page > keywords Frequency > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125465432 107

CORTINA DS 3100 for sale
Flame cutting machine


Max sheet size: 2000 x 3100 mm Workspace: 1500 x 3000 mm Type suction device Kemper Cutting of material thicknesses up to 150 mm Cutting speed: 7000 mm / min Frequency: 50/60 Hz Machine power consumption: max ...
used machine
 
Max sheet size: 2000 x 3100 mm
Workspace: 1500 x 3000 mm
Type suction device Kemper
Cutting of material thicknesses up to 150 mm
Cutting speed: 7000 mm / min
Frequency: 50/60 Hz
Machine power consumption: max. 1.5 kVA
1997
Price  
    request
125494853 101

FLOTT 13 STW for sale
Bench Drilling Machine


bore capacity in steel (diameter): 13 mmthroat: 180 mmbore stroke: mmturning speeds: 400 - 4500 U/minelectrics - voltage/frequency: 400/50 V/Hzspindle taper MT: MK 2 table surface area: 220 x 290 mmconnected load freque ...
used machine
 
bore capacity in steel (diameter): 13 mm
throat: 180 mm
bore stroke: mm
turning speeds: 400 - 4500 U/min
electrics - voltage/frequency: 400/50 V/Hz
spindle taper MT: MK 2
table surface area: 220 x 290 mm
connected load frequency: 230 V
weight of the machine ca.: 0,045 t
dimensions of the machine ca.: 0,4 x 0,3 x 0,7 m



This ad was created with MODUL MWS - the software solution of LogoTech.
1993
Price  
    request
125465290 105

BEHRINGER HBP 263 A/G for sale
MITRE band saw machine


Well received. Cutting capacity at 90 ° or 75° or 60° round/flat respectively 260 or 300 x 260 mm Mitered at 45 ° round/flat 260 / 260 x 260 mm KL. / gr. Section length 10 mm/any Band saw blade dimensions 4640 x  ...
used machine
 
Well received.
Cutting capacity at 90 ° or 75° or 60° round/flat respectively 260 or 300 x 260 mm
Mitered at 45 ° round/flat 260 / 260 x 260 mm
KL. / gr. Section length 10 mm/any
Band saw blade dimensions 4640 x 34 x 1,1 mm
Cutting speed by 'Frequency 'judge' infinitely variable 14-125 m / min.
Saw motor 3 kW
Weight 2000 kg
Material height 800 mm

Accessories:
Control Panel, hydr. Spray cooling device, bundle clamping device, various band saw blades, instruction manual.
1999
Price  
    request
125494804 107

SCHRÖDER MAK 2 for sale
Swivel Bending Machine


Weight approx.: 3000 kgDimensions (l x w x h) approx.: 3800 x 2200 x 1600 mmDescription: Technical data: useful length 2520 mm, bending capacity 2.5 mm, drive power top beam 2.2 kW, drive power bending beam 2.2 kW, adjus ...
used machine
 
Weight approx.: 3000 kg
Dimensions (l x w x h) approx.: 3800 x 2200 x 1600 mm
Description: Technical data: useful length 2520 mm, bending capacity 2.5 mm, drive power top beam 2.2 kW, drive power bending beam 2.2 kW, adjustment bending beam vertical 50 mm, stroke top beam 250 mm, electric data: operating voltage 3 x 400/230 V, frequency 50 Hz, connected load 5 kVA, protection 60 A (slow), control voltage 24 V (dc), control POS 500, with press brake tools, backgauges, see photos for details
2000
Price  
  DE   request
125451802 103

RECKERMANN 1000 KOMBI for sale
CNC Milling Machines


Technical data rating plate: ï?§ Manufacturer: RAD milling machines GmbH, Solingen ï?§ Machine type: 1000 combination ï?§ Number of stages: 3 Ph â?¢ Frequency: 50 Hz ï?& ...
used machine
 
Technical data rating plate:
ï?§ Manufacturer: RAD milling machines GmbH, Solingen
ï?§ Machine type: 1000 combination
ï?§ Number of stages: 3 Ph
â?¢ Frequency: 50 Hz
ï?§ Operating voltage: 400 V
ï?§ Control voltage: 230V/24V
ï?§ Total nominal current: 40A
ï?§ Hedging: 50 A
ï?§ Year: 08/96
Speed range: 48-2,800 RPM
ï?§ CNC control: HEIDENHAIN TNC 124
Table: 1.570 x 400 mm
ï?§ Table load: 500 kg
ï?§ Traverse path X / Y / Z: 1000 x 350 x 450 mm
ï?§ Spindle retainer: SK 40
ï?§ Hydraulic clamping
ï?§ Spindle speeds horizontal / vertical: 48-2,100 rpm
â?¢ Machine weight: 3.5 t

Accessories
ï?§ Chip tray
ï?§ Coolant unit with pump
ï?§ 4 MaschinenschwingfüÃ?e
Before setting device for tool holder
1996
Price  
    request
125494161 104

AEG DWSL 200/500 for sale
Double Grinder Bench


Weight approx.: 70 kgDimensions (l x w x h) approx.: 1600 x 400 x 1200 mmDescription: Max. disc diameter approx. 200 mm, width approx. 25 mm, speeds 3000 rpm, electrical data: power 500 W, frequency 50 Hz, voltage 220/38 ...

 
Weight approx.: 70 kg
Dimensions (l x w x h) approx.: 1600 x 400 x 1200 mm
Description: Max. disc diameter approx. 200 mm, width approx. 25 mm, speeds 3000 rpm, electrical data: power 500 W, frequency 50 Hz, voltage 220/380 V, see photos for details
 
Price  
  DE   request
125437022 101

MATSUURA H 300 PLUS for sale
Numerically Controlled Machining Centres


Machining center - horizontal MATSUURA H PLUS 300 bearing no 1105-02399 category machining center - horizontal make MATSUURA type H PLUS 300 built in 2005 State second-hand machine control CNC storage France country of o ...
used machine
 
Machining center - horizontal MATSUURA H PLUS 300 bearing no 1105-02399 category machining center - horizontal make MATSUURA type H PLUS 300 built in 2005 State second-hand machine control CNC storage France country of origin JAPAN delivery time s ofort cargo basis FCA further details on request technical details x way 500 mm y way 560 mm z trail 500 mm CNC FANUC 30 I - workspace-FRÃ?SEN-- traverse path X-axis 500 mm - travel Y-axis 560 m m travel z 500 mm table 300 X 300 - clamping surface (left-right) 300 mm - clamping surface (front rear) 300 mm - workpiece weight (max.) 400 kg spindle / head - speed range from 60 rpm - speed range up to 15 RPM - stem diameter 70 mm - on employing ISO BT 40 - torque (max) 146 nm axle drives - feed x 30000 mm/min - feed x up to 30000 mm / min - feed of y of 30000 mm / min - feed y up to 30000 mm / min - feed of z of 1 mm / min - feed z up to 30000 mm/min - rapid traverse x 60000 mm/min - rapid traverse y 60000 mm/min - rapid traverse z 60000 mm / min tool magazine - number of tool positions 51 - tool weight max. 10 kg - tool change time 1.3 s electrical connection data - power supply 42 kVA â connection voltage 400 V mains frequency 50 Hz dimensions / weights - space length 4344 mm - 2.5 mm wide - space total height 2680 mm - weight approx. 8000 kg optional equipment drilling/milling - chip conveyors yes description technical description:
2 compartment pallets.
4th axis. X 360000°
FANUC 30 I

State Description:

This machine can be seen under power.

2005
53,000 €  
    request
125493990 1900

SKF TMBH 1 for sale
High-Frequency Induction Heating Device


Weight approx.: 5 kgDimensions (l x w x h) approx.: 390 x 240 x 100 mmDescription: Heating pliers 114 x 114 mm, opening 52 x 52 mm, max. temperature 200°C, in plastic bag

 
Weight approx.: 5 kg
Dimensions (l x w x h) approx.: 390 x 240 x 100 mm
Description: Heating pliers 114 x 114 mm, opening 52 x 52 mm, max. temperature 200°C, in plastic bag
 
used machinery auction RESALE 65 €  
  FR   request
125374435 503

PALLMANN PTR 4-12 for sale
Shredders


Make : Pallmann Type : PTR 4-12 Year of manufacture : 1986 Condition : as is where is Capacity approx. t/h : 10 t/h Infeed opening height : 280 mm Infeed opening width : 1200 mm Rotor diameter : 400 mm Rotor  ...
used machine
 
Make : Pallmann
Type : PTR 4-12
Year of manufacture : 1986
Condition : as is where is
Capacity approx. t/h : 10 t/h
Infeed opening height : 280 mm
Infeed opening width : 1200 mm
Rotor diameter : 400 mm
Rotor width : 1200 mm
Main motor size : 18,5 kW
Main motor incl. : yes
Voltage : 0 V
Frequency : 50 HZ
Weight approx. : 2420 kg
Measurements approx. : 2770 x 1780 x 1730 mm

1986
Price  
    request
125475352 1900

LUCLA GLU-50 for sale
Silent diesel generator


Weight approx.: 1050 kgDimensions (l x w x h) approx.: 2200 x 890 x 1200 mmDescription: NEW MODEL YEAR 2018. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 ...
used machine
 
Weight approx.: 1050 kg
Dimensions (l x w x h) approx.: 2200 x 890 x 1200 mm
Description: NEW MODEL YEAR 2018. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 cables. Power factor 1/220 0.8/380. Soundproofed. DIESEL ENGINE ZH4100ZD. Features of the 4-cylinder, water-cooled, 4-stroke, direct injection engine. Maximum power 41 kW. Turbo aspiration. Bore (mm)xStroke (mm) 100x115. Compression ratio 19. Consumption (g/kw.h) 239. Displacement 3.61. Water-cooled with radiator. 24V electric starter system. Mechanical motor speed adjustment. Sound level (A) @ 7m <,70 dBA. Alternator LUCLA LU40KW. Self-excited with brushes. Insulation type H. Protection type IP23. Type of re-connectable connection. Voltage regulation <,1.5%. Wave Dispense <,1.5%. THF/TIF <,2%/50%. Control panel with the following functions, emergency stop button. Voltmeter and phase selector. Ammeter and phase selector. Frequency meter. Stop and go. Engine temperature clock. Oil pressure clock. Serial No. 18032117532
2018
Price  
  ES   request
125355311 108

URBAN AKS 3300 for sale
Welding Machines


Butt welding machine Plastic window - welding machine URBAN type AKS 3300 Fabr. # 4455/395 year 1995 Technical data: Mains power plug 220 V Frequency 50 / 60 Hz Mains fuse 16 A Total power of 3,5 kW Compress ...
used machine
 
Butt welding machine
Plastic window - welding machine

URBAN type AKS 3300
Fabr. # 4455/395 year 1995

Technical data:
Mains power plug 220 V
Frequency 50 / 60 Hz
Mains fuse 16 A
Total power of 3,5 kW
Compressed air connection of min. 7 bar using 1/2 connector
Air consumption per weld 12 l at 6 bar
Max angle mirror width 320 mm
Max fighter-mirror width 110 x 110 mm
Max profile height 80 mm
Weld seam limitation range 35 °-65 ° X +/-2 ° C
Range 120 °-300 ° C +/-1 ° C
Dimensions L x W x H 1420 x 870 x 1550 mm
Weight 395 kg
 
Price  
    request
125475354 1900

LUCLA GLU-50 for sale
Silent diesel generator


Weight approx.: 1050 kgDimensions (l x w x h) approx.: 2200 x 890 x 1200 mmDescription: NEW MODEL YEAR 2018. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 ...
used machine
 
Weight approx.: 1050 kg
Dimensions (l x w x h) approx.: 2200 x 890 x 1200 mm
Description: NEW MODEL YEAR 2018. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 cables. Power factor 1/220 0.8/380. Soundproofed. DIESEL ENGINE ZH4100ZD. Features of the 4-cylinder, water-cooled, 4-stroke, direct injection engine. Maximum power 41 kW. Turbo aspiration. Bore (mm)xStroke (mm) 100x115. Compression ratio 19. Consumption (g/kw.h) 239. Displacement 3.61. Water-cooled with radiator. 24V electric starter system. Mechanical motor speed adjustment. Sound level (A) @ 7m <,70 dBA. Alternator LUCLA LU40KW. Self-excited with brushes. Insulation type H. Protection type IP23. Type of re-connectable connection. Voltage regulation <,1.5%. Wave Dispense <,1.5%. THF/TIF <,2%/50%. Control panel with the following functions, emergency stop button. Voltmeter and phase selector. Ammeter and phase selector. Frequency meter. Stop and go. Engine temperature clock. Oil pressure clock. Serial No. 18032117528
2018
Price  
  ES   request
125284550 1103

TM2500 MOBILE Gas Turbine for sale
Gas Turbine CC Power Station


TM 2500 Mobile Gas Turbine 30 MW Dual Fuel Three (3) 30 MW New GE TM2500 Mobile Gas Turbine Generators Developed specifically to respond to the need of fast deployment and electricity supply. Electricity can be genera ...
new machine
 
TM 2500 Mobile Gas Turbine 30 MW Dual Fuel

Three (3) 30 MW New GE TM2500 Mobile Gas Turbine Generators Developed specifically to respond to the need of fast deployment and electricity supply. Electricity can be generated immediately even to the most remote locations around the world. Full power in <10 minutes, 37% efficiency. Trailer mounted, weather proof acoustic enclosures. Small Footprint 78’ x 21’, 87 dBA average noise level, Flexible dual fuel, natural gas and liquid distillate fuels, Dual Frequency 50/60 Hz, Low emissions with demineralised water injection 25 ppm (gas)/42 ppm (liquid), Easy to operate and maintain, Output: 29.5 MW @ 60 Hz (ISO), 27.6 MW @ 50 Hz, Complete with warranty. Great Opportunity to purchase New power equipment below the price of new. Super investment with lucrative financial return.

new
Price  
  US   request
125475356 1900

LUCLA GLU-50 for sale
Silent diesel generator


Weight approx.: 1050 kgDimensions (l x w x h) approx.: 2200 x 890 x 1200 mmDescription: NEW MODEL YEAR 2018. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 ...
used machine
 
Weight approx.: 1050 kg
Dimensions (l x w x h) approx.: 2200 x 890 x 1200 mm
Description: NEW MODEL YEAR 2018. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 cables. Power factor 1/220 0.8/380. Soundproofed. DIESEL ENGINE ZH4100ZD. Features of the 4-cylinder, water-cooled, 4-stroke, direct injection engine. Maximum power 41 kW. Turbo aspiration. Bore (mm)xStroke (mm) 100x115. Compression ratio 19. Consumption (g/kw.h) 239. Displacement 3.61. Water-cooled with radiator. 24V electric starter system. Mechanical motor speed adjustment. Sound level (A) @ 7m <,70 dBA. Alternator LUCLA LU40KW. Self-excited with brushes. Insulation type H. Protection type IP23. Type of re-connectable connection. Voltage regulation <,1.5%. Wave Dispense <,1.5%. THF/TIF <,2%/50%. Control panel with the following functions, emergency stop button. Voltmeter and phase selector. Ammeter and phase selector. Frequency meter. Stop and go. Engine temperature clock. Oil pressure clock. Serial No. 18032117527
2018
Price  
  ES   request
125275005 201

ALTENDORF F 45 for sale
Joiners circular saws


Retractable saws F45 by Abdo with infinitely variable speed Digital control Schiebetischlaenge 3000mm Saw blade tilting from 0 to + 45 degrees Infinitely variable speed control Vario from 2000 to 6000 RPM via frequ ...
used machine
 
Retractable saws F45 by Abdo with infinitely variable speed

Digital control
Schiebetischlaenge 3000mm
Saw blade tilting from 0 to + 45 degrees
Infinitely variable speed control Vario from 2000 to 6000 RPM via frequency converter
Drive motor 5, 5kW with automatic motor brake

Saw blade diameter 550 mm
Easy blade change with quick-change system
Cutting height max 200 mm
Cutting width up to 1040 mm electrically adjustable and positionable
Electrically adjustable swivel angle
Electric height adjustment
The length fence up to 3550 mm with analog display
Angle miter gauge
Width stop folding
Suction connection 120 + 80 mm
Carriage detectable
On off switch on the double trolley
Hand grip
Besaeumschuh
2 emergency stop button
2 used saw blades
4 splitting wedges
Before Ritz aggregate preparation
2 protection hoods

CE mark
Operating instructions

In control programs, E.g. for making angle cuts, grooves / masked cuts, chain dimensions or Spitzmasse deposited, so many steps can be handled easily.
It up to 20 programs can be with the parameters save height, angle and width, for repetitive cuts

Machine with very good facilities and only 3878 hours 1.5 hours per day went, or about.

Dimensions approx. 3250 x 3300 x 1600mm (Lxwxh). Weight approx. 1650kg.

Please the PDF file with our terms and conditions and order form.
The machine can be demonstrated like by appointment with us on-site. We offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider".
2008
12,400 €  
    request
125475372 1900

LUCLA GLU-50 for sale
Silent diesel generator


Weight approx.: 1050 kgDimensions (l x w x h) approx.: 2200 x 890 x 1200 mmDescription: NEW MODEL YEAR 2018. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 ...
used machine
 
Weight approx.: 1050 kg
Dimensions (l x w x h) approx.: 2200 x 890 x 1200 mm
Description: NEW MODEL YEAR 2018. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 cables. Power factor 1/220 0.8/380. Soundproofed. DIESEL ENGINE ZH4100ZD. Features of the 4-cylinder, water-cooled, 4-stroke, direct injection engine. Maximum power 41 kW. Turbo aspiration. Bore (mm)xStroke (mm) 100x115. Compression ratio 19. Consumption (g/kw.h) 239. Displacement 3.61. Water-cooled with radiator. 24V electric starter system. Mechanical motor speed adjustment. Sound level (A) @ 7m <,70 dBA. Alternator LUCLA LU40KW. Self-excited with brushes. Insulation type H. Protection type IP23. Type of re-connectable connection. Voltage regulation <,1.5%. Wave Dispense <,1.5%. THF/TIF <,2%/50%. Control panel with the following functions, emergency stop button. Voltmeter and phase selector. Ammeter and phase selector. Frequency meter. Stop and go. Engine temperature clock. Oil pressure clock. Serial No. 18032117530
2018
Price  
  ES   request
125252843 203

KAELIN HoKä6-450S for sale
Four-sided planing machines


complete reconditioned Working width 420 mm Working height 310 mm 4-sided working height 250 mm Number of spindles 6 Spindle arrangement b-t-r + l-t saw Spindle diameter 50 mm Motor strengths 11-15-7,5-11-11-18.5  ...
used machine
 
complete reconditioned
Working width 420 mm
Working height 310 mm
4-sided working height 250 mm
Number of spindles 6
Spindle arrangement b-t-r + l-t saw
Spindle diameter 50 mm
Motor strengths 11-15-7,5-11-11-18.5 kW
Setting the working width digital
Height adjustable work digital
Feed speed 0-40 m / min
Feed motor 7,5 kW
Turret horizontal hydro 160 x 410 x 50 z4
Turret vertical hydro 160 x 250 x 50 z4
Table height constant 1000
Bevel units 2 x 1.85 kW
Extraction socket diameter 200-200-180-180-60-60-180-180 mm
Space 5370 x 2095 x 2050 mm
Voltage / frequency 400V 50 Hz 3Ph.
Weight 7800 kg
1992
Price  
    request
125475374 1900

LUCLA GLU-50 for sale
Silent diesel generator


Weight approx.: 1050 kgDimensions (l x w x h) approx.: 2200 x 890 x 1200 mmDescription: NEW MODEL YEAR 2018. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 ...
used machine
 
Weight approx.: 1050 kg
Dimensions (l x w x h) approx.: 2200 x 890 x 1200 mm
Description: NEW MODEL YEAR 2018. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 cables. Power factor 1/220 0.8/380. Soundproofed. DIESEL ENGINE ZH4100ZD. Features of the 4-cylinder, water-cooled, 4-stroke, direct injection engine. Maximum power 41 kW. Turbo aspiration. Bore (mm)xStroke (mm) 100x115. Compression ratio 19. Consumption (g/kw.h) 239. Displacement 3.61. Water-cooled with radiator. 24V electric starter system. Mechanical motor speed adjustment. Sound level (A) @ 7m <,70 dBA. Alternator LUCLA LU40KW. Self-excited with brushes. Insulation type H. Protection type IP23. Type of re-connectable connection. Voltage regulation <,1.5%. Wave Dispense <,1.5%. THF/TIF <,2%/50%. Control panel with the following functions, emergency stop button. Voltmeter and phase selector. Ammeter and phase selector. Frequency meter. Stop and go. Engine temperature clock. Oil pressure clock. Serial No. 18032117535
2018
Price  
  ES   request
125242369 1300

MAHLE SFK-09 009 016X16 S1S S3 for sale
Dust extraction plant


Aspirator collector dust Extractor manufacturer: MAHLE Type: SRP 09 009 016 X 16 S1S S3 year: 2016 New and unused! Filter area: 108 m² Filter material: Polyester Fleece with PTFE membrane, Ti07/1 filter ...
used machine
 
Aspirator collector dust Extractor manufacturer: MAHLE
Type: SRP 09 009 016 X 16 S1S S3 year: 2016
New and unused!

Filter area: 108 m²
Filter material: Polyester Fleece with PTFE membrane, Ti07/1 filter cartridges: 9 x 852 032 Ti07/1-12 end plates of the cartridges: St., galvanized filter resistance: approx. 3-4 mbar in mint condition, maximum 15 mbar residual dust content: below 0.5 mg / m3 housing material: mild steel surface nschutz go.: powder coating in RAL 9006 permissible operating pressure: +-50mbar allowable operating temperature: 60 ° C.
Cleaning system: Mahle rotating air nozzles pressure: 4 bar, Abreinigungsssteuerung oil-water - and dirt:
MFS 05delta-p (adjustable for time-dependent
or differential pressure-dependent cleaning system, with delta-p display) input voltage control: 230V, 50 Hz fan: type: TR 561, 2-pole, 1500U/min flow rate: 8000 m 3/h pressure: 3800Pa, you are about 2000Pa for your raw and pure gas side pipe strand on the site g sound levels (noise of beam from the housing): approx. 78dB(A) in 1, 5 m fan housing: steel sheet, painted motor output 15KW power type: 400/690V, 50 Hz on site is a frequency inverter to provide!

The fan is a special version for the higher
Temperature range has been selected, by way of derogation
the previous version of the series

The required operating point (8000 m 3/h at 4800Pa) requires
in this VR use of a FU with setting 52Hz.

including setting silencer
2016
Price  
    request
125475377 1900

LUCLA GLU-50 for sale
Silent diesel generator


Weight approx.: 1050 kgDimensions (l x w x h) approx.: 2200 x 890 x 1200 mmDescription: NEW MODEL YEAR 2018. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 ...
used machine
 
Weight approx.: 1050 kg
Dimensions (l x w x h) approx.: 2200 x 890 x 1200 mm
Description: NEW MODEL YEAR 2018. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 cables. Power factor 1/220 0.8/380. Soundproofed. DIESEL ENGINE ZH4100ZD. Features of the 4-cylinder, water-cooled, 4-stroke, direct injection engine. Maximum power 41 kW. Turbo aspiration. Bore (mm)xStroke (mm) 100x115. Compression ratio 19. Consumption (g/kw.h) 239. Displacement 3.61. Water-cooled with radiator. 24V electric starter system. Mechanical motor speed adjustment. Sound level (A) @ 7m <,70 dBA. Alternator LUCLA LU40KW. Self-excited with brushes. Insulation type H. Protection type IP23. Type of re-connectable connection. Voltage regulation <,1.5%. Wave Dispense <,1.5%. THF/TIF <,2%/50%. Control panel with the following functions, emergency stop button. Voltmeter and phase selector. Ammeter and phase selector. Frequency meter. Stop and go. Engine temperature clock. Oil pressure clock. Serial No. 18032117529
2018
Price  
  ES   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(17)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Air Compressor 40 bar Atelier Francois Atelier Francois, Belgium CE46B, 40 bar


Air Compressor 40 bar Atelier Francois CE 46B Very good condition Atelier Francois CE46B which has FAD 1320 Nm3/h made in year 2011 . This compressor was installed in 2012 (manufacturing year 2011) and operation was stopped in 2015. This unit has frequency controlled speed so it can be adjusted to any capacity up to maximum capacity. Technical data Manufacturer: Atelier François, Belgium Compressor type CE46B Manufacturing year 2011 Capacity FAD 1320 m3/ hour Discharge pressure 40 bar Rotation speed 500 rpm Electric motor 250 kW /400V / 50 Hz frequency controlled

Automatic CIP Line Simonazzi Autosan R4 SIG Simonazzi refurbished in 2018


Automatic CIP Line Simonazzi Autosan R4 – refurbished 2018 This fully automatic CIP line was made by Simonazzi in year 2005 and it was totally refurbished in March 2018. All pumps, valves and instruments are thoroughly maintained, PLC controls was build totally new with Siemens Simatic S7 and touch screen operation. Equipment is today close to new condition. It has 4 x 6 m3 vertical tanks, two washing circuits, both with tube type steam heat exchangers and pumps frequency controlled. In addition, the system has tree additive dozing systems with special acid and alkaline proof dosing pumps and dosing tanks. Manufacturer. SIG Simonazzi Manufacturing year 2005 Model Autosan R4 Main tanks 4 x 6 m3 Serial number SAS 478 Number of circuits 2 Inverters made by Danfoss Touch screen Siemens HMI (new screen) Control PLC Simantic S 7-300 (new PLC) Video: abcs://youtu.be/-QscdXxHI24

CNC Plasma Cutter CR ELECTRONIC ADVANCED PLASMA HD 9-30


Working area: 3000x9000mm, with Plasma Cutting System HYPERTHERM HT2000, including gas console, high frequency aggregate, control panel and extraction HIROSS PGB 006HA1110100.

Automatic CIP Line 4 x 6 m3 SIG Simonazzi Autosan R4


Automatic CIP Line Simonazzi 4 x 6 m3 two circuits This fully automatic CIP line was made by Simonazzi in year 2005 . It has 4 x 6 m3 vertical tanks, two washing circuits, both with tube type steam heat exchangers and pumps frequency controlled. In add ...

Automatic CIP Line 4 x 6 m3 SIG Simonazzi Autosan R4


Automatic CIP Line Simonazzi 4 x 6 m3 two circuits This fully automatic CIP line was made by Simonazzi in year 2005 . It has 4 x 6 m3 vertical tanks, two washing circuits, both with tube type steam heat exchangers and pumps frequency controlled. In add ...

Sintering Furnace NABERTHERM N300


Operating temperature: 1280°C max., control: Controller C40, connected load: 21kW, current: 30.3A, frequency: 50Hz, inner dimensions: 640x445x790mm, inner dimensions: 1100x850x2150mm, weight: 450kg, exhaust system and data recorder not included, catalytic ...

Vibration Welding Machine BRANSON M-502 Hi


Vibration frequency: 240Hz, vibration amplitude: 0.9-1.8mm, weld area: 150cm², clamping force: 18kN, lift table dimensions: 1020x540mm, tool weight: 15-25kg, machine is defective and currently not operational.

Automatic CIP Line 4 x 6 m3 SIG Simonazzi Autosan R4


Automatic CIP Line Simonazzi 4 x 6 m3 two circuits This fully automatic CIP line was made by Simonazzi in year 2005 . It has 4 x 6 m3 vertical tanks, two washing circuits, both with tube type steam heat exchangers and pumps frequency controlled. In add ...

Hydraulic Shear GUIFIL GHD - 1330


Manufactured by Guifil (Portugal) Year of manufacture 2003 Backgauge control: Adiramatic 2087 Max. plate thickness, mm 13 Max. plate width, mm 3080 Main drive power, kW 18,5 Voltage, V 400 Frequency, Hz 50 Machine weight, kg 12500 The hydraulic ...

Brush sanding machine WOODLAND MACHINERY SK1300-P6


Type SK1300-P6 Working width 1300 mm Min.working length 370 mm Working thickness 5-140mm Polishing roller speed - Frequency control Feeding speed 2.5-12,5 m/min Total motor power 16.87 kW

JENBACHER J320 GS C05 J320GSC05


Engine Specification: Engine Type : J320GSC05 Engine No : 4158111 Kw : 1095 Rpm : 1500 Weight : 5200Kgs Alternator specification : Serial No : 4158391 YOM : 2004 KVA/KW :1064 (Normal power) Frequency : 50Hz Voltage : 415 ...

Injection molding machines Engel VC 500/110 TECH 110Ton Victory


Engel 110 Ton Victory VC 500/110 TECH Lot of 4 machines same model Year 2004 Voltage 400v Frequency 50Hz In production YES 40mm

Brushing Machine with Universal Oven WALTER LEMMEN RBM 300, UF55


System consists of Brushing Machine BUNGARD RBM 300: working width: 300mm, workpiece thickness rigid: 0.3-3mm, brushes rotational speed: 1360/min, oscillation stroke: 10mm, oscillation frequency: 10-110/min, feed rate: 0.2-2m/min, water consumption: 6.8l/ ...

Saldatrice NTE 120/FS


For sale exclusively on 01/03/2018 day hours 11.00 at Dueville (VI) For more information contact us at 0307751645 High frequency welding machine Model: NTE 120/FS With # 2 Chargers Electronic welding machine with automatic conveyor Model: TE60

Saldatrice NTE 120/FS


For sale exclusively on 01/03/2018 day hours 11.00 at Dueville (VI) For more information contact us at 0307751645 High frequency welding machine Model: NTE 120/FS With # 2 Chargers Electronic welding machine with automatic conveyor Model: TE60

Gas generators MTU 12V4000-L61


NATURAL GAS GENERATOR MTU, TYPE 12V4000-L61 (1.160Kwe). -MAKE: MTU -YEAR: 2008 -OPERATING HOURS: 47.120 H -ELECTRICAL EFFICIENCY: 41%. -ALTERNATOR: STAMPFORD 400VOLT -FREQUENCY: 50 Hz. -RATING: 1. 450kVa. (1.160Kwe) -SPEED: 1.500RPM. -FULLY  ...

Gas generators MTU 16V4000-L61


NATURAL GAS GENERATOR MTU, TYPE 16V4000-L61 (1.560Kwe) . - MAKE: MTU - YEAR: 2008 - OPERATING HOURS: 47.230 H - ELECTRICAL EFFICIENCY: 41%. - ALTERNATOR: STAMPFORD 400VOLT - FREQUENCY: 50 Hz. - RATING: 1.950kVa. (1.560Kwe) - SPEED: 1. ...

Knuckle-Joint Press SMERAL K849A, 2000T


Capacity: 2000 ton Ram stroke: 280 mm Ram stroke in Min.: 18 Shuth height: 830 mm. Distance between frame`s guides: 1040 mm Bed: 1300 x 1300 mm. Tension of the elec. system: 380 V Frequency of elec. system 50 Hz Main el. motor: 56 kW Working air  ...

Bardi NILO 2P-105-232-224-28R


Bardi NILO 2P-105-232-224-28R Bottle Washer, year 2003 Built in stainless steel Heating system: steam (max pressure 5bar) Production capacity: 26,000 bph Treatment time: 14.5 min Voltage/frequency: 400V 50Hz 3Ph+T+N Installed power: 52 kW Full  ...

Standard Motors GRUNDFOS MOT MG 160MB2-42FF300-C, 160MA


(1) GRUNDFOS MOT MG 160MB2-42FF300-C: frequency: 50-60Hz, voltage: 380-480V, current: 17.4-23.6A, rotational speed: 2920-3530/min (2) MOT GRUNDFOS MG 160MB2-42FF300-C/ 160MA2-42FF300: frequency: 50-60Hz, voltage: 380-480V, current: 18.8-22A, rotational sp ...

Hydraulic Pump PARKER PV180


(1) Axial Piston Pump PARKER PV180R1K1T1N001: output: 270l/min, pressure: 420bar max., rotational speed: 1800/min (2) Valve PARKER D1VW30BDTP70: pressure: 350bar max. (3) Motor MEZ 3AFC315M04 209H: connected load: 132kW, frequency: 50Hz, voltage: 380V, cu ...

Transport belt Transport belt Belt


Transport belt Year 1995 ? Belt length 650 mm (but we can extend the length to your desired length) Belt width 330 mm (maximum up to 440 mm) Speed Frequency controlled speed Available direct

Dry Vacuum Pump EDWARDS IDX 1000


Pumping speed: 900-1000m³/h, ultimate pressure: 0.05mbar, motor power: 30kW, frequency: 50Hz, length: 2250mm, width: 750mm, height: 854mm, weight: 1.6t, number of available pumps: 2, year of construction: 2x 2016, 1x 2015.

FREQUENCY CONVERTER for el motors TELEMECANIQUE/SCHNEIDER E Frequency Converter


7 pcs used FREQENCY CONVERTERSBrand: TELEMECANIQUE / SCHNEIDER Electric (German brand)Year: 2007.Serviced regularly.1 pc 7,5 kW1 pc 15 kW1 pc 45 Kw2 pcs 90 kW2 pcs 250 kW With 4 pcs filters for those 4 pcs 90 and 250 kW.Package price: 3.200 Euro EXW Swede ...

Industrial Inkjet Printer VIDEOJET EXCEL 170i


(1) XL 170i UHS: ink consumption: 7SCFM max., current: 1-2A, frequency: 50/60Hz, compressed air supply: 6.9bar, compressed air consumption: 1.2m³/h, voltage: 100-240V (2) XL 170i UHS AF: ink consumption: 7SCFM max., current: 1-2A, frequency: 50/60Hz, comp ...

Start Hole Erosion Machine MB MASCHINEN COBRA BA01


Voltage: 400V, frequency: 50-60Hz, connected load: 3.5kVA, control: TOPEDM TSH-3A.

Package Temperature Control Units PIOVAN Thermovan


Package includes: (1) PIOVAN Thermovan TH 3/OBN: Voltage: 220V, frequency: 50Hz, power: 3000W (2) PIOVAN T06: Voltage: 400V, frequency: 50Hz, power: 6000W, weight: 50kg, number of available machines: 2, year of construction: 2001, 2007 (3) PIOVAN THN30: V ...

Double-Sides Grinding Machine SAL


Plate dimensions: 200-2300x200-4000mm, glass thickness: 3-19mm, design: L-shape, control: SIEMENS Step 7, drive: Frequency converter STÖBER, including Washing Machine, Angle Linkage and Drilling Machine BENTELER: Plate dimensions: 150-2300x500-4000mm, too ...

Heavy duty lathe Kramatorsk 1A670 (2000x10000 mm )


Technical specification: Max job diameter: Over bed: 2000 mm Over support: 1600 mm Min job diameter: 400 mm Table diameter: 2000 mm Distance between centers: 10000 mm Max weight of job: 63 ton Spindle rotation frequency: 1-125 rpm Opening diame ...

Transformer KENTLER DSA 630/20


Connected load: 630kVA, frequency: 50Hz, Nennspannung: 19200-20800V, operating mode: DB, switching group: Dy5, nominal current: 19A, length: 1360mm, width: 760mm, height: 1835mm, weight: 2.1t.

CFS BTF


Product number: 1138WB Type: BTF Serial number: 100 Year of construction: 2004 Power: 3 x 400V, 50Hz, 0.09kW Dimensions: 1435 x 920 x 1790 mm Weight: 130 kg Machine is frequency-controlled. Including TopLobe pump.

Labelling machines Soco System T-10


Case sealers Soco System. Model T - 10 No. machine: 498-2006 Year: 28/2006 Voltage: 3x415V Frequency: 50 Hz 1.5 A Dimensions: width belt rollers 600mm, long tape rolls 900mm, 800mm, 1000mm length, 1610mm height.

Waste presses Bartontech


BARTONTECH 1100 LTR Bin Press • Reduces the frequency of daily/weekly 1100 litre waste bin collections. • Base lifting plate ensures bin wheels are not damaged during compaction. • A compaction ratio of 3:1. • Two hand operation makes for a safer w ...

Transformers Iljin(Korea) 8000kVA


8000kVA transformer Make:Iljin(Korea) Year:2010 Oil water cooler type Continuous rated capacity: 8000kVA Frequency:60 hz Rated Voltage:22900/130(V) The first voltage:22900V The first current:201.7 A The secondary voltage: F180~9 ...

transformer Iljin(Korea) 8000kVA


8000kVA transformer Make:Iljin(Korea) Year:2010 Oil water cooler type Continuous rated capacity: 8000kVA Frequency:60 hz Rated Voltage:22900/130(V) The first voltage:22900V The first current:201.7 A The secondary voltage: F180~9 ...

High Speed Presses BRUDERER BSTA 30


Technical details: Bruderer BSTA 30 / 600 spm Press force max. 300 KN CNC Complete process control Touch screen 10" and PLC / English and German language Power consumption from 1.5 to max. 5.5 KW Danfoss High frequency inverter Technical Air 6- ...

Filling equipment TETRA PAK Tetra Spiralflo


Complete milk UHT plant, year 2001 Consists of: 1. UHT Line - UHT Basismodul Edtmayer, capacity 6500 l/h - Control pannel Siemens SPS S7-400, frequency adjustment - Heat exchanger (Pasteurizer) Tetra Spiralflo type Multitube MT85/7x16 S-6  ...

Production lines LOMA IQ3+ Metal Detector


Loma metal detector IQ3 + for sale. Head size 650mm x 350mm ( working size 620mm x 310mm). Variable belt speed controlled by new LG frequency drive. Fully Automatic product calibration with multifrequency range from 31kHz to 882 kHz. Full reports down ...

Angled Belt Conveyor KRUPS KF50 6200/600 mm


Belt length: 6200mm, belt width: 600mm, load capacity: 5kg max., drive speed: 12m/min, loading height: 200mm, unload height: 2200mm, including Drum Motor BDL 110S: Power: 0.15kW, rotational speed: 1435/min, voltage: 200-270V, frequency: 50Hz.

Screen Printing Machine ESC VERTOMOVEX-SPZ


Voltage: 400V, power: 3000W, frequency: 50Hz, including Drying Tunnel SVECIA SSJD: Belt length: 7900mm, belt width: 1700mm, operating temperature: 90°C max., air circulation output: 2000m³/h, heating module length: 2000mm and Squeegee Grinding Machine SVE ...

Automatic CIP Line 4 x 6 m3 SIG Simonazzi Autosan R4


Automatic CIP Line Simonazzi 4 x 6 m3 two circuits This fully automatic CIP line was made by Simonazzi in year 2005 . It has 4 x 6 m3 vertical tanks, two washing circuits, both with tube type steam heat exchangers and pumps frequency controlled. In add ...

Suction Unit FUCHS IF 3


Voltage: 380V, frequency: 50Hz, power: 1.5kW, current: 3.8A, length: 950mm, width: 670mm, height: 2250mm.

Spot Welding Machine MESSER-GRIESHEIM PFU-20


Current capacity: 25kVA, throat: 550mm, short circuit power: 42kVA max., welding power: 34kVA max., open-circuit voltage: 1.8-3.2V, voltage: 380V, frequency: 50Hz, current: 13A, length: 400mm, width: 1200mm, height: 1300mm.

CIRCULATION PUMP GRUNDFOS CH 8-30 A-W-A-CVBE


Product: CH 8-30 a-w - A-CVBE Code: 4N502115 EAN number: 5700311371947 Pumped liquid water Temperature range of the liquid 0... 90 ° C Type of engine MG80 Power input - P1 970 W Operation C 20 µF P2 740 W Power 50 Hz frequency Rated voltage 1 x  ...

Glass Cutting Table ROHMER STIMPFIG RS 7.55


Glass dimensions: 1350x1900mm max., glass thickness: 2-12mm, voltage: 400V, frequency: 50Hz, compressed air supply: 6bar, including breaking table.

Vakuum-Emulgator DUMEK DUMOTURBO 150


Useful capacity: 150l, total capacity: 202l max., batch size: 50l min., power: 14kW, current: 34A, voltage: 400V, frequency: 50Hz, length: 1000mm, width: 1800mm, height: 1930mm, weight: 980kg.

Vacuum Emulsifier DUMEK DUMOTURBO 100


Useful capacity: 100l, total capacity: 135l max., batch size: 30l min., power: 14kW, current: 27A, voltage: 400V, frequency: 50Hz, length: 1000mm, width: 1800mm, height: 1875mm, weight: 900kg.

Vacuum Emulsifier DUMEK DUMOTURBO 10


Useful capacity: 10l, total capacity: 14l max., batch size: 3.5l min., power: 5kW, current: 16A, voltage: 400V, frequency: 50Hz, length: 750mm, width: 1200mm, height: 1650mm, weight: 380kg.

Siatem NTE 120/FS


Tools and machinery for plastic processing Several machines including: High frequency Siatem NTE 120/FS Polar 115 EMC Mohr letter opener Huron NU3 Parallel lathe Comev MT of 2001, EC Flat surface grinding Alpa Atlas Copco air compressor Compactor  ...

Engine Lathes (Sliding, Surfacing And Screw Cuttin Comev MT 200/1000


Tool machinery for sale numerous machines including: -High frequency SIATEM Mod. NTE 120/FS with 2 Chargers euro 2,625 -Press to Brown in hot OROPRESS euro 2,850 -Longitudinal Cutter PASQUATO Mod. TGL 15 € 3,750 -Paper Knives POLAR Mohr Mod. 3,750 eur ...
Find used machinery dealers in your country