Category: 111 spare parts for machine tools
Latest update: 09.01.2024 add to watchlist
ankerimg
item-No.: 163114380

used

Seller: FKW Fertigungsmaschinenbau Kilgenstein Wiesen GmbH
Location: Land-de

add to watchlist

Fmax 6000 daN, nmax 4000 min-¹ External 250 mm, Centering 220 mm, DIN 6353 Size 8, Thread M30 Guide pin 100

Category: 103 milling machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162812457

used

Location: Land-de
Price: 250 € add to watchlist

Two-jaw chuck, 2 jaw chucks, vice, face plate -exciting: centric -Chuck size: Ø 200 mm -Weight: 19 kg

Category: 103 milling machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162813438

used

Location: Land-de
Price: 250 € add to watchlist

Two-jaw chuck, 2 jaw chucks, vice, face plate -Clamping angle: 200 x 200 mm -centric exciting -Chuck size: Ø 200 mm -Weight: 30 kg

Category: 110 accessories for machine tools / Lathe Chucks
Latest update: 08.03.2024 add to watchlist
approved
dealer
item-No.: 163151320

used

check Seller: WK-Praezisionsmaschinen
Location: Land-de
Price: 1.290 € add to watchlist

Hand chuck three-jaw chuck FORKARDT, Type:315 Supplied with / without clamping flange Flange for milling or drilling table (option 150,00€) Three-jaw lining: cyl. Flange mount ø 300 mm, Bore diameter approx. 80 mm Included in delivery: short, modified FORKARDT base jaws FGB-315 with reversible top jaws. The mounting flange can be fixed on the milling or drilling table. Other DIN flanges on request The lining is cleaned and tested. Jaw guide, spindle and scenery stones are in good condition. Countertop jaws with clear signs of wear. Other clamping jaws are available on request. ( Option) Due to the weight, freight forwarding is required. Price within Germany incl. packaging approx. 100,00€

Category: 110 accessories for machine tools / Lathe Chucks
Latest update: 06.03.2024 add to watchlist
approved
dealer
item-No.: 163400178

used

check Seller: WK-Praezisionsmaschinen
Location: Land-de
Price: 215 € add to watchlist

used-tested base jaws for three-jaw chuck - wedge rod chuck size approx. ø 315mm for power chucks on request Manufacturer: (FORKARDT-RÖHM-SCHUNK_KITAGAWA) Base jaws in good functional condition: Base jaw type: Helical toothing Metrics: Width: 32 mm Length: 125mm Height: F-groove: 12mm Bridge: 26mm Hole spacing: 54mm Thread: M12 x 1.5 mm Weight / per set: 3.5kg Supplied with or without screws There are several sets in stock. (New or tested-used)

Category: 110 accessories for machine tools / Lathe Chucks
Latest update: 06.03.2024 add to watchlist
approved
dealer
item-No.: 163519894

used

check Seller: WK-Praezisionsmaschinen
Location: Land-de

add to watchlist

As good as new reversible base jaws Insert: Three-jaw chuck, helical toothing, Manufacturer for example: FORKARDT,RÖHM ,SCHUNK;,SMW-Autoblock Power chuck type on request? Designation of the base jaws FGB-630; FGB630 (FORKARDT) for the construction of commercially available, reversible, hard top jaws Three-jaw wedge rod chuck ø 6300mm: Hand chuck F630, Duro630; THW630 B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La=hole spacing; Za = tooth spacing; S= Groove (top jaw) base jaw W = 65 mm H = 62 mm L = 230 mm N = xx mm S = 24mm La= 82mm Thread M20 Weight approx. 8-10 Kg /piece Price on request:

Category: 110 accessories for machine tools / Lathe Chucks
Latest update: 08.03.2024 add to watchlist
approved
dealer
item-No.: 163534473

used

check Seller: WK-Praezisionsmaschinen
Location: Land-de
Price: 2.190 € add to watchlist

Hand chuck three-jaw chuck FORKARDT, Type:FG315 Supplied with clamping flange Flange for milling or drilling table Three-jaw lining: cyl. Flange mount ø 300 mm, Bore diameter approx. 80 mm FORKARDT Basic Jaws FGB-315 with reversible top jaws. Mounting flange manufacturer FORKARDT DIN 55027 J6 Other DIN flanges on request The lining is cleaned and tested. Jaw guide, spindle and scenery stones are in good condition. Other clamping jaws are available on request. ( Option) Due to the weight, freight forwarding is required. Price within Germany incl. packaging approx. 100,00€

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162819813

used

Location: Land-de
Price: 650 € add to watchlist

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Beeks: hard -Chuck size: Ø 250 mm -Short taper mount for: bayonet disc -Short taper mount: Ø 139.719 mm -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 44 kg

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 160453476

used

Location: Land-de
Price: 750 € add to watchlist

3-jaw wedge bars lathe chuck FORKARDT TYPE F+160 No. 1659 181 identical Forkardt F315 or SMW diameter: 160 mm Inner diameter: 45 mm Chuck flange: short cone DIN 55022 Size 6 1 set of feed jaws consisting of basic jaws and hard attachment step jaws for turning 1 set of feed jaws consisting of basic jaws and soft attachment step jaws for turning - central adjustment Weight: 11 kg good condition; used

Category: 104 grinding machines
Latest update: 20.10.2023 add to watchlist
approved
dealer
item-No.: 71905298

used

check Seller: Erwin Knoll Import & Export
Location: Land-de

add to watchlist

Three-jaw Chuck Forkardt compensating voltage -Verschiebeweg 35 mm -Jaw stroke 2, 5 mm Radial compensation ability 0.5 mm Speed 5000 RPM Lining very good condition dating back to location resolution of a grinding machine manufacturer New price ca 25000 euro Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Category: 111 spare parts for machine tools
Latest update: 09.01.2024 add to watchlist
ankerimg
item-No.: 163114379

used

Seller: FKW Fertigungsmaschinenbau Kilgenstein Wiesen GmbH
Location: Land-de

add to watchlist

Outer 400 mm, mounting cone 196 mm, DIN 55027 size 11 Fmax 9000 daN, nmax 3000 min-¹, bayonenette lock 6 bolts

Category: 111 spare parts for machine tools / Spare Parts
Latest update: 07.03.2024 add to watchlist
approved
dealer
item-No.: 163151319

used

check Seller: WK-Praezisionsmaschinen
Location: Land-de
Price: 1.850 € add to watchlist

As good as new three-jaw chuck FORKARDT F+250. Wedge bar chuck Three-jaw chuck incl. 3 snap fasteners Three-jaw chuck incl. flange ♦ 4 x Fastening bolts, spindle mounting flange - bayonet lock ♦ Tension wrench available. Pictures: Three-jaw chuck No. 1628855 ♦ incl: flange mount DIN 55027 - J8 ø 139 mm. ♦ Without base jaws and top jaws: (option 170,00€) ♦ Without feed key not included: (option if available) Due to the weight, the lining, should only be can be picked up or sent by a freight forwarder. If you have any questions, please do not hesitate to contact us.

Category: 109 other metal working machines / Power Chucks
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 157045367

used

check Seller: ATMH werkzeugmaschinen-Handel GmbH
Location: Ennepetal - Halle 3 Land-de

add to watchlist

diameter: 315 mm weight of the machine ca.: 100 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 110 accessories for machine tools
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 157046303
New in: 2000

used

check Seller: Sperling Werkzeugmaschinen
Location: Bochum (NRW) Land-de

add to watchlist

diameter: 250 - 500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 109 other metal working machines
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157811485

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Diameter: 350 mm Machine´s weight about: 120 kg

Category: 110 accessories for machine tools / Tool Holders
Latest update: 03.10.2023 add to watchlist
approved
dealer
item-No.: 160049120

used

check Seller: WMH24
Location: 73563 Mögglingen Land-de

add to watchlist

16 pieces tool holder external machining 41 tool holders internal machining

Category: 102 lathes / Three-Bake-Feed Automatics
Latest update: 24.01.2024 add to watchlist
approved
dealer
item-No.: 160192166

used

check Seller: MaTraCom e.K.
Location: 70469 Stuttgart Land-de
Price: VB 650 € add to watchlist

Deir piece 3 cheek chuck Brand Forkardt 2x 315 mm diameter and 97 mm high 1x 200 mm diameter and 75 mm high with various attachment jaws The retail price is net.

Category: 110 accessories for machine tools / Three-Jaw Power Clamping Chuck
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 160951875

used

check Seller: FLECKENSTEIN Werkzeugmaschinen GmbH
Location: Lager Kleinostheim Land-de

add to watchlist

diameter: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 1 piece 3-jaw power chuck make FORKARDT type 3WF 400 K15 S23 Ø 400 mm with centrifugal force compensation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 110 accessories for machine tools / Faceplates
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 162631851

used

Location: Land-de

add to watchlist

faceplate diameter: 630 mm total power requirement: . kW weight of the machine ca.: . kg dimensions of the machine ca.: . m 950 U/Min Dicke: 120 mm J11SWB Siehe PDF Anlage The technical Data is manufacturer or operator information and therefore for us not binding. We reserve the right to make an interim sale, it apply exclusively our business and conditions of sale. About Us more than 400 of our own machines in warehouse over 12,000 m² of storage space, crane capacity 70 t more than 1000 items of accessories for your workshop You want to sell machines production lines or your business, Then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162812626

used

Location: Land-de
Price: 750 € add to watchlist

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 315 mm -Interchangeable jaws: soft -Short taper mount: Ø 135 mm -Hole circle: 172 mm -Weight: 90 kg

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162813727

used

Location: Land-de
Price: 450 € add to watchlist

Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Handover: in current condition as seen -Wedge bar chuck: Spare parts carrier, see photos for missing parts -Chuck size: Ø 315 mm -Passage: Ø 86 mm -Intake: short cone 11 -Weight: 64 kg

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162817045

used

Location: Land-de
Price: 550 € add to watchlist

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Transfer: in the current condition as seen -Base plate: slight damage to the outer edge, see photo -Manufacturer: Forkardt, wedge bar chuck with clamping plate -Chuck size: Ø 250 mm -Hole circle: Ø 235 mm -Cone: Ø 195/150 mm -Through hole: 60 mm -Dimensions total: Ø 400 x 265 mm -Weight: 67 kg

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162818864

used

Location: Land-de
Price: 1.150 € add to watchlist

Face plate, face plate chuck, four-jaw chuck -without: screw-on jaws -Manufacturer: Forkardt -Chuck size: Ø 610 mm -Taper holder short taper: 8 (139 mm) -Weight: 121 kg

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162820447

used

Location: Land-de
Price: 750 € add to watchlist

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 315 mm -Passage: Ø 86 mm -Number: 3x feed available -Price: per piece -Weight: 60 kg

Category: 110 accessories for machine tools / Machine Tool Accessories
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 162828748

used

check Seller: Maquinas Talleres Luis Alonso SL
Location: fuente de cantos Land-es

add to watchlist

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 315 mm -Passage: Ø 86 mm -Number: 3x feed available -Price: per piece -Weight: 60 kg

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
FORKARDT 3rd category level
  • FORKARDT faceplates (1)
  • FORKARDT machine tool accessories (1)
  • FORKARDT power chucks (1)
  • FORKARDT spare parts (1)
  • FORKARDT three-bake-feed automatics (1)
  • FORKARDT three-jaw chucks (1)
  • FORKARDT three-jaw power clamping chuck (1)
 
RESALE used machinery 25 years online