We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
4 Cyl. Ford industrial engine, alternator, tractor Ford 5000, pass.f. New Holland Mähdr. 8030
used
We offer two Ford gas cogeneration plants for sale. Synchronous generator: Emod 19 KVA Engine: Ford Voltage: 230 / 400 3 phases Frequency: 50 Hz Speed: 1500 rpm COS phi: 0.8 Starter: 24 V Weight: 900 kg Year of construction: 1996 Hours of operation: 24,000
used
Ford cardboard stitching machine; good condition; Long sleeve; suitable for flat wire; 380 volts; Exit via foot switch.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
used
Ford generator set 35 kVA ++ only 20 operating hours ++ - - - - - Engine: -Ford - 3 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - 35 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Starter Unit: - Ignition lock for starting - Engine temperature display - Oil pressure indicator - Generator monitoring: volts, amps, hertz - Operating hours counter: 19 operating hours - - - - - Condition: - The generator set is an emergency system - It has only run 20 hours of operation - A test run with load reduction was made - The engine starts and runs well - The generator generates 400 volts and 50 hertz - A new AVR controller has been installed - - - - - Scope of delivery: - Ford generator set 35 kVA - with starter unit -Tank -Exhaust - - - - - Transport: - A Germany-wide transport is possible for an extra charge - In ...
new
Diesel generator / new and unused Make: Ford Model FDT10200SE Voltage: 230 V and 400 V Continuous power: 7.5 KvA Short-term maximum power: 7.9 KVA corresponds to 9.75 kW Pure Sine Wave: Yes Frequency: 50Hz Starting Method: Electric Volume: 72 dB ATS: No Fuel tank capacity: 14 litres Fuel: Diesel Weight in kg: 168 kg Runtime: 7 hours at 75% load Dimensions (LxWxH): 920 x 520 x 720
used
We sell used car parts such as engines, gearboxes, drive shafts, body parts from all common car brands
used
Engine Brand: FORD, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 4 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 39 Kw, Rated Speed: 2215 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/153229, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: FSD 425; Transport weight [kg]: 400
used
Engine Brand: FORD, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Working Hours: 631 Hour(s), Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Rated Power: 175 Kw, Rated Speed: 2500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/218743, , = More information =, , Type: Engine, Height: 170 cm, Type number: 2802 E V8 POMPSET 550M3/H
used
Engine Brand: FORD, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Rated Power: 56 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/218848, , = More information =, , Type: Engine, Type number: 2714E POMP 550 BAR
used
Description: Vehicle was recorded during operation Mileage approx. 136,500 kilometers Will still be used until April MOT: 11/24 Including installation without contents! Collection possible from 18th calendar week Machines can only be loaded onto motor vehicles, trucks with trailers or semitrailers are not possible for space reasons Approx. Onsite Dimension. (l x w x h): 5,400 x 2,000 x 2,600 mm, Vehicle identification number: WF0XXXTTFXBP37204, weight approx.: 1,800 kg
used
Description: 6500 maximum watts 420cc OHV engine electric start mounting kit 50Hz 220V-240V for 1-phase 220/380V-240/415V for 3-phase steel frame 25L fuel tank unused P023-3900 Approx. Onsite Dimension. (l x w x h): 560 x 650 x 795 mm, weight approx.: 93 kg
used
Description: 6500 maximum watts 420cc OHV engine electric start mounting kit 50Hz 220V-240V for 1-phase 220/380V-240/415V for 3-phase steel frame 25L fuel tank unused P023-3900 Approx. Onsite Dimension. (l x w x h): 560 x 650 x 795 mm, weight approx.: 93 kg
used
Description: v.v. 2800 maximum watts 212cc OHV engine 50 Hz mounting kit steel frame 15 liter fuel tank 3000 rpm unused P023 - 3901 Approx. Onsite Dimension. (l x w x h): 430 x 610 x 480 mm, weight approx.: 45 kg
used
Description: v.v. 2800 maximum watts 212cc OHV engine 50 Hz mounting kit steel frame 15 liter fuel tank 3000 rpm unused P023 - 3901 Approx. Onsite Dimension. (l x w x h): 430 x 610 x 480 mm, weight approx.: 45 kg
used
Description: electric start mounting kit 50Hz 230V 6/6.3kva 400V 7.5/7.9kva steel frame 14L fuel tank 92dB unused in packaging 4448 Approx. Onsite Dimension. (l x w x h): 920 x 525 x 685 mm, weight approx.: 186 kg
used
Description: electric start mounting kit 50Hz 230V 6/6.3kva 400V 7.5/7.9kva steel frame 14L fuel tank 92dB unused in packaging 4448 Approx. Onsite Dimension. (l x w x h): 920 x 525 x 685 mm, weight approx.: 186 kg
used
Backhoe loader, multifunction device with engine damage otherwise good substance, new tyres at the rear
used
We offer you Iseki compact tractor TH 4632 AHL from a current recycling. Year of construction 2020 (registration date 22.10.2020) Asset Manager: Birgit Heinemann Phone: 0202 257273153 Mail: b.heinemannakf.de We will be happy to provide you with details upon request. Location: 82407 Wilzhofen The sale is without warranty Subject to prior sale
used
Advantages of Aflatek 3in1 10A: -7.5kW electrical motor. -Integrated 150l air tank. -Air and oil filters as well as oil separator already included. -Low noise and vibrations level. -Compact, vertical design. -Integrated air dryer. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, kW: 7.5 Motor speed, rpm: 2950 Drive type: Direct drive Motor protection: IP 54 Air supply at 8 bars, L/min: 1100 Air tank, L: 150 Dimensions (length x width x height), mm: 1400x700x1380 Weight, kg: 310 Shipping details: Packaging: Plywood box on a pallet Dimensions (length x width x height), mm: 1500x800x1500 Weight, kg: 340 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.
used
Shell end mills, shell mills, milling cutters -Diameter: 50 mm -Working height: 100 mm -Carbide tipped -Adjustment: SK50
used
Description: HSK-A63 shrink mount partially equipped, on tool carrier from Gühring, Komet, Garant, Holex, I-Tec Approx. Onsite Dimension. (l x w x h): 440 x 350 x 340 mm, weight approx.: 18 kg
used
Specifications load Bearing load: 80 kg Further data and types Number of axes: 3 Repeatability: +/-0.1 mm Weight: 1200 kg
used
Technical data: Loads Load: 70 kg Additional load: 20 kg Workspace: Max range: 1720 mm More info and versions: Number of axes: 4 Repeat accuracy: +/-0.1 mm Weight: 1050 kg to 1200 kg
used
for material Ã?: 6-80 mm for rod lengths: 100-915 mm Recording size: 945 x 800 mm Working height: 1400 mm height adjustment: +/-200 mm Electr. Connection: 220 V Space requirements: 3420 x 1150 x 1500 mm Weight: 300 kg
used
was connected to Gildemeister GMC 20