used FOMACO Pickle injectors

The injector is a device for introducing brine solution through point injection of the raw product. Producer: Fomaco; Model: FGM 208 B; The machine has 208 needles (4mm diameter); The width of the tape is 740mm; The conveyor belt is not complete; Without brine filter; Length: 2300 mm; Width: 1200 mm; Height: 2300 mm; Weight: 1500 kg.

Product number: 1829 Type: FGM48SC Serial number: 7829 Year of construction: 1999 Belt width: 400 mm Product height: max 150 mm Needles: 96 pcs of 4 mm Air pressure: 6 Bar Power: 3 x 400V, 50Hz, 32A Dimensions: 2300 x 1500 x 2300 mm Including self-cleaning protein filter FM80 and PFS5/225CS brine tank For boneless and bone-in products

Curing injector Fomaco FGM 48F SC BLP M3 Injector Tenderizer FGM48FSCBLPM3 + belt filter CBF 500, used Type: FGM 48F SC BLP M3 manufacturer: Fomaco A/S, Denmark (fomaco.com) Year of construction: 2015 Flexible injector tenderizer for meat, poultry or fish industry. Good condition, previous use in the field of fish. The M3 is a series of thoroughly tested, high-quality production machines designed for use in demanding and aggressive production environments. The "box-in-box" construction seals and protects critical electrical components and controls from the ingress of water, moisture and weathering. By using state-of-the-art pumping systems, dead zones and low-flow areas are eliminated, resulting in a constant pressure and precise flow rate. The result is an even distribution of brine - regardless of product, type, size and number of needles. With the BLP quick release system,  ...

Product number: 2530J Type: FGM48-288T Serial number: 9020-2009R Year: 2009 Belt width: 420 mm,, walking beam Needles: 2 x 144 knives Product height: max 240 mm Power: 3 x 400V, 50Hz, 8A Dimensions: 2300 x 750 x 2300 mm

Fomaco FBM 1000 Brine mixer Condition: Excellent Designed as an additional and essential tool for Fomaco brine injectors to mix ingredients. With this brine mixer, the process of mixing ingredients is very smooth and quick with spectacular results at output. The mixer automatically fills the tank with water to the desired level, and the operator only has to add the dry ingredients into the hopper. Brine mixing capacity: 1000 liters Tank volume: 40 liters Voltage: 3 x 400 V \ 50 Hz Dimensions (LxWxH): 2215 x 1940 x 2235 mm.

Fomaco FGM 112 is a high-performance equipment designed to enhance the quality of meat and fish while increasing the yield rate. It is specifically suitable for working with bacalao fillets, as it offers extended clearance to accommodate them. The machine is equipped with two bridges, each featuring 112 Quadro needles with a diameter of 2.5 mm. The capacity of this injector can reach up to 15 tons per hour, depending on the product being processed. This injector fully complies with all sanitary and safety regulations, ensuring the highest standards are met while significantly reducing production costs. Additionally, it is equipped with a brine filter and a storage tank for convenient brine handling and storage.

Brine injector GÜNTHER PI17

Brine injector WANTED PSM 12-24-4.0

Type: PR 15 Number of needles: 15 Needle diameter: 4 mm Max product: width 270 mm Tact per minute: 15 to 55 tact/min. Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0,5 to 4,0 bar Electric power: 1.5 kW Machine dimension in cm: Width: 50 Lenght: 125 Height: 150 Delivery time: 30 working days after advanced payment

Type: PI 88 Number of needles: 88 Two pressure pump Needle diameter: 4 mm Max product: width 360 mm Tact per minute: 15 to 55 tact/min. Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0,5 to 4,0 bar Electric power: 6.5 kW Machine dimension in cm: Width: 60 Lenght: 210 Height: 190 Delivery time: 30 working days after advanced payment

– 36 needles – Completely factory refurbished – With 1 year warranty.

Automatic injector INJECT STAR BI 124/248 needles. 2006 manufactured. The machine is complete with a rotary filtering system. Fully factory refurbished with 1 year warranty.

Manufacturer: Karpowicz NK-17 Year of construction: 2015 Power supply: 400 V / 50Hz Power: 1.1 kW Dimensions: length 1740 x width 750 x height 2050 mm Weight: 320 kg Intended for injecting red meat, with or without bones Injection pressure adjustment Touch control panel PROFACE GP4100 The number of needles 17, needle thickness 4 mm The width of the conveyor belt 250 mm The height of the rise of the needles is 190 mm Adjustable belt travel: 9 + 35 mm Number of measures: 13 + 60 measures / min Maximum capacity up to 1 t/h Brine tank with filter system Request an offer iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT ID: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36

Type: SCHRODER N 120 Number of needles: 120 Diameter of needles: 3 mm Product width: 620 mm Transportation type: walking beam Product passage height: 180 mm Brine pressure: 0,5 – 4,0 bar Machine dimensions in cm: Width: 120,0 Width with filter for brine: 200,0 Length: 220,0 Height: 225,0 Compressed air: 6,0 bar Power: 14,0 kW Voltage: 380 V, 50 Hz

Type: : Schröder N 138 Number of needles: 138 Diameter of needles: 4,0 mm Product width: 620 mm Transportation type: walking beam Product passage height: 200 mm Brine pressure: 0,5 – 4,0 bar Machine dimensions in cm: Width: 110,0 Length: 220,0 Height: 230,0 Power: 10,0 kW Voltage: 380 V, 50 Hz

Type: IMAX 520 Working with boneless meat Product width: 520 мм Cycles: 15 to 60 per minute Feed: max. 60 mm Product height: 130÷230 mm Number of needles: 200 (2 х 100), 4 мм Brine pressure: 0,5-4,5 bar Machine charging height: 1170 mm Compressed air: 6bar Voltage: 230/400 V, 50/60 Hz Connection: 10,0 kW ; 23 А Rotary brine filter DF 510 Machine dimensions in mm: Length: approx. 2100 Width: approx. 1350 (about 2500 mm with filter) Height: approx. 2300

Type: N 50 Number of needles: 50 Diameter of needles: 4,0 mm Max. product width: 350 mm Transportation type: walking beam Product passage height: max 180 mm Brine pressure: 0,5 - 4,0 bar Machine dimensions in mm: Width: 800,0 Length: 1600,0 Height: 1900,0 Power: 8,0 kW , 17 A Voltage: 380 V, 50Hz

We sell here a curing injector from the manufacturer Rühle, type IR 17 in a very good used and functional condition. The machine runs on 400 volts, 7.6 kW, built in 2012, 17 needles, 2 speeds, completely stainless steel, workshop tested, immediately ready for use, dimensions B/D/H 105/70/185 cm, more on request.

Injector Inject Star Type: PI 36 Number of needles: 36 Needle diameter: 4 mm Passage mechanism type: Gear rack rail Electric power: 3kW Machine dimension in cm: 50x160x200cm

Used Metalbud Nowicki MH140 injector is a high-performance device. It is equipped single head, easy and clear control using inituitive panel and efficient rotary drum filter for brine filtration. Using different parameters it is possible to adjust the belt speed and injecting pressure. Whole construction is made of acid resistant stainless steel which guarantees the ease of maintenance and maximum hygiene. Number of needles: 140 Max product height: 200mm Installed power: 11.7kw Belt width: 400mm Dimensions: L 1800 x W 1010mm x H 2015mm Weight: approx 550kg

Product number: 2471J TypeI: MAX420 Serial number: 4201 1061 Year of construction: 2006 Needles: 108 pieces of 3 mm Walking beam: 420 mm Advance:50/100 mm Product height: max 140 mm Cycles: 15 to 60 per minute Compressed air: 6 Bar Power: 3 x 400V, 50Hz, 16kW Dimensions: 2300 x 2200 x 2300 mm Including rotating filter

Number of needles: 21 Needle diameter: 4 mm Max product: width 280 mm Tact per minute: 15 to 55 tact / min Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0,5 to 4,0 bar Electric power: 2,5 KW Machine dimension in cm: Width: 57 Lenght:150 Height: 176 Delivery time: 30 working days after advanced payment

Number of needles: 21 Needle diameter: 4 mm Max product: width 280 mm Tact per minute: 15 to 55 tact / min Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0,5 to 4,0 bar Electric power: 2,5 KW Machine dimension in cm: Width: 57 Lenght:150 Height: 176 Delivery time: 30 working days after advanced payment

Automatic injector 216 needles Type: ІМАХ 420 Product width: 420 мм. Cycles: from 15 to 60 Feed max.: 60 mm. Product height: 130÷220 mm Number of needles: 216, 3 mm. Brine pressure: 0,5-4,5 bar Machine charging height: 1150 mm Compressed air min. 6 bar Voltage: 230/400 V, 50/60 Hz Connection: 14,0 kW ; 32А Rotary brine filter: DF 510 Dimensions, mm: Machine length: approx. 2200 Machine width: approx. 1350 (approx. 2200 mm with filter) Machine height: approx. 2300 Weight: 1500 kg.

Type: PI 17 Number of needles: 17 Needle diameter: 4 mm Max product: width 280 mm Tact per minute: 15 to 55 tact/min. Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0,5 to 4,0 bar Electric power: 2.5 kW Machine dimension in cm: Width: 57 Length: 150 Height: 176 Delivery time: 30 working days after advanced payment