FLOW used machine for sale

Inv. Num. : 7516 Type: 9XVD-55 Producer: Flow Created: 1997 Parameters: The machine is in good technical condition.

Inv. Num. : 7371 Type: WMC2-4030 Producer: Flow Created: 2007 Parameters: Operating hours: 21000 h Work table length: 4000 mm Work table width: 3000 mm Cutting head: Paser ECL Equipment: Abrasive dispensing system Water supply Metallurgical material (10 tons) New Console Shelf Spares Replacement high-pressure pump (37 kW) 2017: new pump

Water jet system flow model IFB2 3618 TC 1 P Year of construction: 2005 State good (used) hours of operation 25000 h IFB2 3618 TC 1 p UP 50iS cooling working range 3600 mm x 1800 mm High pressure pump 50iS 60ESL 4150 bar with Abrasivbehaelter without any program software Immediately available. Installation and Setup on request

Water jet system Flow Model IFB2 3618 TC 1P Year of construction: 2005 Condition good (used) operating hours 25000 h IFB2 3618 TC 1P UP 50iS Cooling Working area 3600mm x 1800mm high pressure pump 50iS-60ESL 4150 Bar With abrasive Without program software Available immediately . Installation and commissioning on request

IFB (integrated flying bridge) Working area: 1200mm x 2000mm (real 1210mm x 1990mm) Table is 1400mm x 2040mm Operating hours: approx. 17.000 h Pump: Model: ESC Allan Lickiss, power 4150 bar The machine can be changed on Abrassiv cutting (other cutting head), all parts are almost unused. The machine was used exclusively for pure water cutting. ; ready to go

Number of Hours: 10000 h; Cutting area: 3000 x 2000mm; Z-axis travel: 150 mm/ 178 mm; Linear accuracy: 0.038 mm by 1 m; Repeatability: 0.050mm; Cutting speed: 7.6 m/min; Travel speed: 12.7 m/min; Equipment: DYNAMIC Waterjet XD cutting head Hyperjet pump 94IS 65000 bar 5-axis head +/- 60° Steel deck

This Flow MACH4 4060 XD Waterjet Cutting machine was manufactured in the year 2014. It is equipped with a Flow control unit and has 5 axis. The machine has a working pressure of 6000 bar.

This Flow Mach3 4020B Waterjet cutting machine was manufactured in the year 2013 in the United States. It is equipped with a Flow control unit. The machine has a cutting area of 4000 x 2000 mm.

This Flow Mach 200-400 Waterjet cutting machine was manufactured in the year 2021 in the United States and has 170 production hours. It is equipped with a Flow control unit. The machine has a cutting area of 4.0 x 2.0 m.

This Flow WMC2 4030 Waterjet Cutting Machine was manufactured in the year 2007 in United States. It is operated with a FlowMaster 6.0 control unit and it counts with a pump drive power of 4150 bar. It also has a new pump installed in 2016 and it comes with a water treatment system and an abrasive material hopper.

4.7L high pressure pump Table catcher: 4000/2000/700 - 4 lease drain bins Qualicot grid Abrasive pulser 1996 / 16000h CNC: NUM 720 (worked with a buried rainwater tank)

Metal length x width : 3000 mm x 2000 mm Operating pressure : 4000 Bar The machine includes: x, y, z axes, a cutting pool, an oil cooler pump, an electric cabinet with a special computer with WinXP and Flowcut and FlowCNC software, protective barriers and a sand addition system. Some spare parts , all documents come with machine

Pressure atmospheric maximum: 4000 bar X - axis: 3000 mm Y - axis: 2000 mm Sheet thickness: 0,00 mm Number cutting heads: 0   CNC Brand: _Unknown / Other CNC Model: Flowcut FLOW - MACH3 3020B CNC Waterjet 3000 x 2000 x 4000 Bar MACH - ID 6372 Make: FLOW Type: MACH3 3020B Control: FLOWCUT YOP: 2013 Hours: 3000 Working area X Axis    3.000 mm Working area Y Axis    2.000 mm Working area Z axis     178 mm Power resonator            4000 bar kW / Amp Feed rate X-Axis           12.700 mm Feed rate Y-Axis            12.700 mm Feed rate Z-Axis            12.700 mm Control            FLOWCUT Cutting hours     3000 H Linbear straightness a ...

x-travel: 3000 mm y-travel: 4000 mm z-travel: 640 mm Control: Siemens Sinumerik 840D table-size: 3000 x 4000 mm swivelling +/-: 57 Grad traversing speed: x-axis: 20000 mm/min y-axis: 20000 mm/min z-axis: 12000 mm/min positioning accuracy: +/-0,1 mm/m repeating accuracy: +/-0,025 mm total power requirement: 15 kW weight of the machine ca.: 4 t equipped with: - CNC Siemens control Sinumerik 840D,Handwheel and Siemens SIMATIC S7-300 and SIMODRIVE 611, 1GB HHD Drive - Machine works with 2D cutting head - High pressure translator pump model 20 XD -55 (415Mpa, 75KW) - Paser 3 abrasive blast cutting system - Water softening dosing system - height sensor and collision monitoring for the 2D head, - Pneumatic tool clamping New X-axis spindles in 2017 New table support system 2017, Abrasive desludging system & new grease lubrication system 2017 Operating hours approx. 16700h dismantled and stored  ...