used FLEX TURN Processing Centers

Compulsory mixer, agitator, mixer, mixing tool, stirrer -Nominal consumption: 1000 watts -Connection: 230 volts -Speed: 500 rpm -Dimensions: 500/200/H100 mm -Weight: 5 kg

Compulsory mixer, agitator, mixer, mixing tool, stirrer -Nominal consumption: 1000 watts -Connection: 230 volts -Speed: 500 rpm -Dimensions: 650/300/H200 mm -Weight: 6 kg

Clichee size: 150x150mm, compressed air supply: 5-6bar, documentation available.

Overall size: 3950 x 3700 x 300 mm Door size: 3600 x 3500 mm

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240T -Hydraulic hose: HD240T 90 BAR -Dimension: Ø 60 x 1290 mm -Weight: 4.9 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240T -Hydraulic hose: HD240T 90 BAR -Dimension: Ø 60 x 1380 mm -Weight: 5.0 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240Tx1230AOLSF5090 -Hydraulic hose: HD240T 90 BAR -Dimension: Ø 60 x 1240 mm -Weight: 5.1 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240Tx1350AOLSF5045 -Hydraulic hose: HD240T 90 BAR -Dimension: Ø 60 x 1350 mm -Weight: 5.2 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240Tx1340SF50VASF5090 -Hydraulic hose: HD240T 90 BAR -Dimension: Ø 58 x 1360 mm -Weight: 5.3 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240Tx1080SF50VASF5045 -Hydraulic hose: HD240T 90 BAR -Dimension: Ø 58 x 1100 mm -Weight: 4.5 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240Tx2180AOLAOL45 -Hydraulic hose: HD240T 90 BAR -Price: per piece -Number: 2 pieces -Dimension: Ø 60 x 2020 mm -Weight: 7.1 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 110 mm -Piston rod: Ø 60 mm -Cylinder tube outside: Ø 115 mm -Stroke: 1200 mm -Total length retracted center center hole: 1465 mm -Piston rod holder: Ø 30 mm -Recording cylinder: Ø 30 mm -universally applicable: -Number: 2x cylinders available -Price: per piece -Dimensions: 1530/115/H130 mm -Weight: 62 kg/piece

Description: Serial number: 001138986270113 Speed range: 5600 - 1900 rpm Power: 710 W In case With operating instructions Approx. Onsite Dimension. (l x w x h): 620 x 260 x 130 mm, weight approx.: 15 kg

Description: With various polishing rollers In case Approx. Onsite Dimension. (l x w x h): 415 x 290 x 300 mm, weight approx.: 25 kg

CNC plasma cutting system working range: 1500 x 3000mm OTC Superplasma 12000 Cutting up to 20mm quality cutting New control ProDNC from Micompan data transfer via USB; ready to use

Long reach - flail mower for rear three point attachment, cutter head 125 cm with hammers (380 g) and bottom roller. Bowden cable control, own hydraulic system, drive via PTO 540 RPM. Range horizontal 507 cm from tractor centerline, vertically to 500 cm, tractor weight minimum 2100 kg; min. 37 kw/50 hp required (factory specifications). Other smaller long-reach flail mowers and mower technology on stock!

Element welding Turntable werkstueck drehvorrichtung

CNC plasma cutting system Work area: 1500 x 3000 mm OTC Super plasma 12000 Cut quality cutting up to 20 mm New control ProDNC from Micompan Data transfer via USB

Selling TOP TURN lathe from 2017 55 KW under warranty until October 2024, little used SMW AUTOBLOCK CN FAGOR 3 axis telescope D 780 mm max turning diameter 500 mm with tool holder tools

Swing over bed/ slide: 400/ 190mm, center height: 220mm, center distance: 1000mm, bed width: 330mm, with documentation.

Reconditioned Christy Turner Pulverizer complete with new full set of ADI liners and hammers installed, the machine has been well maintained and runs like new. Comes with a lot of spare parts including hammers, shafts, spacers, some ADI liners and a completely reconditioned spare main drum complete with mounted bearings.

x-travel: 600 mm y-travel: 270 mm z-travel: 400 mm spindle taper ISO: 40 ISO table:: 1120 x 260 mm feed:: 24 - 402 mm/min. turning speeds: 45 - 1660 U/min distance spindle /table: 100 - 480 mm T-slots: 3x 14x63 mm workpiece weight: max. 250 kg milling head swivable ca.: 360 ° total power requirement: 2,4 kW weight of the machine ca.: 1480 kg range L-W-H: 1660 x 1500 x 1730 mm ** New price ~ 13.000 euros The TURNIER universal milling machine is suitable for execution of light and medium-heavy milling work. Thanks to her big Versatility and ease of conversion can use them in workshops for processing small and medium-sized series with success be used. Furnishing : - Universal milling head, adjustable to all angular positions - Swiveling control panel with ergonomically positioned switches - Heavy cast iron machine stand for vibration-free work - Dovetail guides - Standard with automatic ta ...

Clamping clamps, pointed filing clamps, hand filing clamps, screw clamps, steel construction clamps, clamps, clamping tools -Inside diameter: 104 mm -Dimension: Ø 155/30 mm -Weight: 2.1 kg

Turning table, s/s frame, plastic top, table diameter: ø 1220 mm, total dimensions: 1250 mm x 1250 mm x 820 mm.

Turning table, s/s frame, plastic top, table diameter: ø 1130 mm, total dimensions: 1170 mm x 1170 mm x 900 mm.