We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Plate circular saw Finesse vertical Format 510 x 205 cm 2 seed units (1 x horizontal, 1 x vertical) L x W x H: 620 x 260 x 100 cm Weight approx. 700 kg Built in 1975 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Plate circular saw Finesse vertical Format 510 x 205 cm 2 seed units (1 x horizontal, 1 x vertical) L x W x H: 620 x 260 x 100 cm Weight approx. 700 kg Built in 1975 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
new
Dimension of sliding table- 1600x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 650 kg Transport dimensions - 1800x1000x1200mm * Using the blade 400mm, the smaller should be removed. ** Reduced saw blade should be used with not more than 350 mm main shield.
new
Best price 4150 Eur (EXW Jonava, Lithuania) Buying this machine, dust exhausting system HOLZMANN ABS 3880 only 320 Eur (EXW Jonava, Lithuania) or HOLZMANN ABS 2480 only 250 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 2800x375mm Gross cut capacity- 2800mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 125mm Height of cut (45°) - 115mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Main motor - 5,5 Kw Saws lifting, up and down, electrical control. Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Transport dimensions - 2800x1000x1100mm Weight - 800 Kg
new
Best price 4500 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 3200x375mm Gross cut capacity- 3200mm Width of cut between saw blade and rip fence - 1250mm Saw blade diameter - 400mm Height of cut (90°) - 125 mm Height of cut (45°) - 115 mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 Kw Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Transport dimensions - 3200x1000x1100mm Weight - 850 Kg
new
Best price 4600 Eur (EXW Jonava, Lithuania) Buying this machine, dust exhausting system HOLZMANN ABS 3880 only 320 Eur (EXW Jonava, Lithuania) or HOLZMANN ABS 2480 only 250 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 3800x375mm Gross cut capacity- 3800mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 125 mm Height of cut (45°) - 115mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Main motor - 5,5 Kw Saws lifting, up and down, electrical control. Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Transport dimensions - 3800x1000x1100mm Weight - 820 Kg
new
Dimension of sliding table- 2200x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 700 kg * Using the blade 400mm, the smaller should be removed. ** Reduced saw blade should be used with not more than 350 mm main shield.
used
Cutting length mm: 4500. Cutting depth mm: 4500 Number of pliers: 7 Installed power KW: 15 Diameter saw blade mm: 300 Vorritzer: Yes Discharge tables pneumatic: 3 Weight Kg: 3100 CE marking
new
Key data: 4200 , 2200
PUTSCH panel saw Product Name: Putsch Panel Saw Type: SVP 420 M Machine number: S-420-10.420.013 Condition : New device Technical details: • max. cutting length: 4,200 mm • max. cutting height: 2,200 mm • highest horizontal cut: 2,080 mm • max. cutting depth: 60 mm • Connection for suction: 100 mm diameter • Engine power: 5 hp/3.75 kW • Saw blade speed: 5,300 rpm • Saw blade diameter: 250 mm • Dimensions: L x W x H = 5,750 x 1,400 x 3,150 mm • Weight: approx. 1,000 kg Transport dimensions: L x W x H 1st box 1,150 x 3,100 x 1,200 mm 2nd box 5,300 x 150 x 235 mm Number of packaging units: 2 • the model series 420 is particularly suitable for continuous use in confined spaces • electr. driven, automatic shifterost • swung away center support for narrow workpieces • sliding system ...
used
Cutting length: 2200 mm Cutting height: 30 mm automatic: nein ja/nein The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
see pdf attached
used
I sell a vertical panel saw standing with vorritzer GMC KGS400E, built in 2007, as good as new. Cutting surface 4500x2100mm Engine 3kW. Sawing unit swivel 0-90° Main saw blade diameter 240-250mm / 5200rpm. With vorritzer 104-110 x 20mm / 7000rpm. Manual cutting. Weight 665kg. Condition as new. Available the same.
new
Code: N0004 Brand: SICAR Model: SEGA 315 - Norme CE Professional panel saw SEGA 315 with carriage 3200 mm , blade 315 and scoring unit with separate motor - CE Standard Three-phase main motor 7,5 hp. Parallel guide on round bar with cast iron support and micrometric adjustment, blade lifting and tilting by handwheels, tilting blade unit with integrated scoring unit, aluminium carriage sliding on ball bearings, fence on extendable frame with two reversible stops. TECHNICAL DATA: Main worktable mm 910x550 Additional worktable mm 910x760 Additional lateral worktable mm 500x550 Main blade speed rpm 4000 Scoringunit speed rpm 8000 Blade diameter mm 300x30 Scoring diameter mm 120x20 Cutting height at 45° mm 75 Cutting height at 90° mm 100 Max cutting distance between blade and scale mm 1250 Carriage dimensions mm 3200 Three-phase motor power HP 5,5 ...
used
Vertical panel saw make STRIEBIGTechnical specifications:Height: 2500mmLength: 5000mmwith- pivoting headused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Vertical + horizontal panel saw make STRIEBIGTechnical specifications:Cutting length: 6500 mmCutting height: 2500 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
SPECIFICATIONS: Workspace: Horizontal cutting length mm: 6000 Vertical cutting height mm: 2200 Workpiece height mm: 78 Saw blade diameter mm: 300
used
I sell a panel dividing saw Paoloni Fimal Concept 350. Built in 2016. Cutting length 3200mm. Cutting height 95mm. Saw blade swivel 0-45° Main motor 5,5kW MOTEK Combined area W.4000mm x D.3000mm 3 pcs. Parallel posizionaire with double posizion regulazion for short or wide dimensions. 2 pcs. Posozionary manual on the additional rear stop 2 pcs posozionary left manual with digital display 2 posozionary on the angular stop Very good condition. Available the same. Incl. full documentation and CE certificate.
new
Cutting length 4500 mm Pliers slide depth 4500 mm Saw blade projection 95 mm Gate valve 1-60 m/min Motor 9 kw Scoring motor 0.75 KW/1PS Machine cuts in format4 sides
new
Vertical panel saw with pliers Cutting length 5200 mm Cutting height 2200 mm cutting depth 70 mm Saw blade diameter 300 mm Scoring unit incl. adjustable Automatic sliding erost
used
Code: 0068 Brand: GIBEN Model: STARMATIC 850 - CE Standard CNC Horizontal panel saw with clamps for cutting wood panels, plywood, furniture, composite materials, sandwich panels, plastics and various materials - CE Standard Technical data: Useful cutting length 4500 mm Automatic pusher with lateral upper guides, electronically controlled, complete with 6 pneumatic clamps- Clamps opening 117 mm - Pusher stroke 4550 mm Max blade projection 85 mm Max main blade diameter 360 mm Main blade motor 7,5 kW - Rpm 3827 Max scoring blade diameter 160 mm Scoring blade motor 1,1 kW - Rpm 8290 Scoring exclusion with choiceor Quick tool removal (Pneumatic) Automatic adjustment of main blade overhang according to stack height Adjustment (lateral and in height) of outside scoring unit Blade carriage translation by brushless servomotor Blade carriage feed speed 1-80 m/min Blade car ...
used
Very robust and easy-to-use machine for dividing panel-shaped wood-based materials. - welded, multi-braced, Construction - Support rollers braked - Slatted frame with wooden overlays - long middle support on optimal Height - Fixation for vertical and horizontal cut - Two scales for adjusting the Cutting width for horizontal cutting - Powerful, low-vibration motor Cutting length horizontal mm : 4.300 Cutting length vertical mm : 2.200 Cutting depth mm : 80 Machine length mm : 5.300 Transport heightmin mm : 2.550 Saw blade diameter mm : 303 Dimensions LxH : 5300x2750 mm
used
- Self-supporting, firmly welded, torsion-resistant saw frame with hardened guides - TRK2 Automatically evasive aluminium slatted frame with plastic pads - 17-fold roller support with 3 brake pedals - 5.15 m long, split center support - Stable, durable saw bar construction - Powerful, powerful engine - Supersilent system to dampen engine noise - Electromagnetic motor brake - Cutting area 5300 x 2240 x 80 mm Incl. small parts support made of wood over the entire length of the machine and set for free-standing assembly
used
- welded, multi-braced, Construction - Support rollers braked - Slatted frame with wooden overlays - Powerful, low-vibration motor Cutting length horizontal mm : 5.300 Cutting length vertical mm : 2.200 Cutting depth mm : 80 Machine length mm : 6.300 Transport heightmin mm : 2.550 Saw blade diameter mm : 303 Dimensions LxH : 6300x2990 mm
new
Vertical panel saw 5200 x 2200/2100 mm 4 kw motor Panel saw with pliers For trimming pruning
used
Vertical panel saw 5200 x 2200/2100 mm 4 kw motor Panel saw with pliers For trimming pruning