used FESTO Engine Lathes Sliding Surfacing And Screw Cutting Lathes

pneumatic reciprocating engine, pneumatic motor FESTO stroke: 80 mm piston Ø approx. 250 mm rod: Ø 32 mm (inverted piston pump principle) control valve J-5/2-D3 C 151865 New !! Dimensions: 345 x 275 x 395 mm

Double pin cutting and slotting machine model ZA 2 T Longitudinal saw 2 strong milling motors large sliding slide long milling stop LAS pneumatic tool clamp

Tenon beater, slotted and tenon milling machine FESTO Type: ZA101 5 Aggregates 2 x sawing unit 3x milling unit Guide carriage Mitre stop adjustable The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline. Depending on the agreement of dismantling and loading, or removal, these may differ. Please inquire in advance ...

Pneumatic measuring and test bench for apprenticeship training, mobile FESTO PNEUMATICS Working surface: 1170 x 575 mm Working height: approx. 900 mm 3x Insertion: 600 x 500 mm ( depth x width ) 2x Magnetic board: 850 x 1550 mm ( height x width ) Compressed air boiler: approx. 10 l case with accessories 4x swivel castor without brake used, tested ! Dimensions: 1370 x 720 x 1940 mm

Pressure build-up and bleed valve, pilot-operated FESTO MFHE-3-1/2 10421 2 - 10 bar Connections: G1/2 ( inch ) without solenoid coil New ! Dimensions ( valve ): 90 x 86 x 132 mm

Pressure build-up and bleed valve, pilot-operated FESTO MFHE-3-1/4-B 14329 2 - 10 bar Connections: G1/4 ( inch ) without solenoid coil New ! Dimensions ( valve ): 73 x 71 x 115 mm

Pressure build-up and vent valve FESTO MS6-SV-1/2-E-10V24-SO-AG 548717 Operating pressure: 3.5 - 10 bar connections: 2x G1/2 ( inch ), 1x G1 ( inch ) rated operating voltage: 24 V DC IP65 New ! Dimensions: 375 x 65 x 105 mm

• Stroke: 235 mm • Piston diameter: 40 mm • PPV: pneumatic damping, adjustable on both sides • Installation position: any • Twist protection by square piston rod • How it works: double-acting • Operating pressure: 0.2 - 12 bar • Ambient temperature: -40°C to 80°C • Type of fastening: with internal thread and accessories • pneumatic connection: G 1/4 • maximum torque of the twist protection: 1.1 Nm • Impact energy in the end positions: 0.2 J • Operating medium: COMPRESSED air according to ISO 8573-1:2010 [7:4:4] • Oiled operation possible (required in further operation) • Attachment to the piston rod: M 12 • Note: Goods are unpackaged but as good as new! • 6 pieces are offered, these can be purchased individually as well as in a package! The price refers to the unit price!!! (Changes and errors to technical data and prices reser ...

Three-point gripper, HGDD-63-A-G1, 1163047, Festo, new We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. If you have a UID number, we will be happy to issue you an invoice without VAT. As good as new! The part was bought from a spare parts warehouse of a company, has never been in operation, is completely new, but not in the original packaging. 4 - 8 bar Functional guarantee! We cannot provide a conventional warranty and warranty for second-hand parts. Since we know that the device works, we give you a functional guarantee when you purchase it. If the device does not work within 3 months of purchase, you can return the goods and we will refund the purchase price.

Linear actuator, DGPL-050-865-PPV-A-KF-B, 161795, Festo, new Special price !! We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Valve Islands Manufacturer: Festo Type: VIFB-06-D-1, TN 18 810 1 x INTERBUS-S modules indent.: 5 4 x LR CP A/B-D-1 11 x J-5/2-D-1 C. 22 x MNDH-3-1.4 External dimensions: width x length x height (approx. 73 x 23 x 8,5 cm) All information without guarantee

stable table press with pneumatic cylinder FESTO DN 200-50 to 10 bar loadable max. nominal force : according to FESTO catalogue approx. 18840 N at 6 BAR Steel tube frame press Table passage approx. 1.2m Installation height approx. 400 -550 mm (lift-adjustable steel frame) Pneu. Two-hand operation and maintenance unit Mass: approx. 1.35 x0.75 x 1.6 m

Manufacturer: Festo 4 Koilen with holder made of aluminium profiles and 4 rollers Hose condition: New for more data see also photos please.

Three-point gripper, HGDD-63-A-G2, 1163048, Festo, new We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. If you have a UID number, we will be happy to issue you an invoice without VAT. As good as new! The part was bought from a spare parts warehouse of a company, has never been in operation, is completely new, but not in the original packaging. 4 - 8 bar Functional guarantee! We cannot provide a conventional warranty and warranty for second-hand parts. Since we know that the device works, we give you a functional guarantee when you purchase it. If the device does not work within 3 months of purchase, you can return the goods and we will refund the purchase price.

Wall chain stemmer Head swivelling up to 45C, 380 V, 1.7 KW, with accessories. Div. Chains. Swords: 12x14 17x50x175 1 pcs. 12x17 50x175 2 pcs. 9x11 40x150 2 pcs. 12x17 20x75 1 pcs.

diameter of piston: 0 0 stroke length max.: 0 0 2 boards with hydraulic and pneumatic spareparts from Rexroth, Parker, Vickers, Festo, Wabco and Orsta! Without board, only sparepars! partially unused! Detailed pictures can be supplied. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used PLC control, functional, ex stock

used PLC control, works perfectly, from stock

We still have 2 pieces in stock. Price ex stock and per piece

PLC control, still 1 piece in stock, price from stock pr piece

Central processor unit CPU, also with model number: 170174 recognizable, price ex stock

Servo motor + electric sled, EMMS-AS-70-M-LS-RMB + EGSK-46-200-10P, Festo, used Top Attention: Original Festo product - No replica from… Special price !!! If you have a VAT number we will gladly issue an invoice without VAT. As good as new! From my assessment, the linear actuator is as good as new, but is sold as used. The part was purchased from a spare parts store of a company and has never been in operation. The actuator was installed, tested, disassembled and stocked in the spare parts warehouse as a replacement linear actuator. Servo motor EMMS-AS-70-M-LS-RMB, Festo Electric slide EGSK-46-200-10P, Festo Functional guarantee! For second hand parts we can not provide a conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purcha ...

Manufacturer: Festo Machine Type: RSTC-U W40/7/500GL Overall size: 1600 x 900 x 1800 mm Plate width: 500 mm Number of castors: 6 Voltage: 380 V

Festo Grind hedgehogs Diameter 145mm Grinding height 120mm for grinding sleeves G&-5000-M356V

Valve terminal, valve assembly, 50E-F14GDQSERYKJUXUXIX….., Festo, new Absolute special price !!! Attention: Original Festo product, no replica from...... We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price is € 4.450 excl. VAT. If you have a UID number, we will gladly issue an invoice without VAT. New in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely new and in ist original packaging. Valve terminal, valve assembly from Festo MPA-FB-VI, 50E-F14GDQSERYKJUXIXPXNY-D-UL1-EX1E+M, 32P-SGK-R-MAASVAIIIU-10KKSL The valve terminal consists of 44 valuable Festo components: 1) 1 piece of angle, CPX-EPL-EV, 195716, 2) 1 piece linking block, CPX-GE-EV-S-VL, 8022170, 3) 7 pieces ...