We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Producer Fermat Year manufacture 2012 Control system Heidenhain TNC 620 Diameter of working spindle 100 mm Travel X-axis 2000 mm Travel Y-axis 2000 mm Spindle speed 10 - 3000 /min. Cooling through spindle 20 bar Spindle travel - W axis 730 mm Travel Z-axis 1250 mm Spindle taper ISO 50 Table dimensions 1250x1400 mm Max. load of table 3000 kg Machine weight 24050 kg Machine dimensions l x w x h 4370x3850x3600 mm Technical parameters Control system Heidenhain T
used
The SF 55/1000 CNC lathe is in good technical condition. It is equipped with a hydraulic chuck with a dia. 300 mm and a tool head with 8 positions enabling automatic exchange. The rear tool holder can be clamped to the support. The machine can be tested. Accessories: rear knife holder Circulating diameter above the bed: 550 mm Revolving diameter above support: 310 mm Distance between spikes: 1000 mm Spindle drilling: 82 mm Spindle speed - range: 80-3500 Max. workpiece weight: 2000 kg
used
Description: The machine is in good technical condition. Pressing force: 160 t Maximum sheet length: 3200 mm Accessories: Upper split tool, lower bar. Weight: 10500kg By prior arrangement, the possibility of a tour in progress.
used
Inv. Num. : 6845 Type: SF 55/1000 Producer: Fermat Created: 2007 Parameters: Control system: FAGOR Max. turning length: 1000 mm Maximum turning diameter over bed: 550 mm Maximum turning diameter over support: 310 mm Maximum spindle speed: 80-3500 1/min Maximum workpiece weight: 2000 kg Number of tool head positions: 8 Spindle bore: 82 mm Spindle taper: MORSE 5 Lathe chuck diameter: 300 mm Axis X: 300 mm Z axis: 1150 mm Engine power: 11/15.5 kW Weight: 3800 kg Equipment: Rear knife holder Fixed bezel Front panel
used
Key data: 790 mm, 1500 mm, 2400 1/min
Control Fagor Turning diameter ... 790mm Rotation length... 1500mm Spindle bore.. 82mm Circulation diameter via support ... 310mm Circumferential diameter above bed ... 550mm Axis X ... 300mm Axis Z ... 1650mm Spindle speed ... 80-2400 rpm. Rapid traverse of the X axis ... 15m/min Rapid traverse of the Z axis ... 15m/min Main engine power ... 11/15.5kW L x W x H ... 3690 x 2225 x 2050mm Machine weight... 4400kg The machine is in good condition, possible to test under electricity.
used
X 2000 mm Y 1700 mm Z 1250 mm W 730 Spindle diameter 110 mm kwW/Nm (S1) 19.5/951 3000 U/min Table 1400 x 1600 mm, table load 10 t T-grooves 22H8 Control HH 640 HR 510 ATC 40 H Coolant 70 bar on the power unit, with paper belt filter and oil separator Fixed cabin Spindle support 250 mm ISO 50 Immediately available!
used
X 4000 Y 2500 Z 1500 W 800 Spindle diameter 130 mm kwW/Nm (S1) 4pinacles 2099 3000 U/Min. Table size 2000 x 2400 mm, maximum table load 20 t T-grooves 22H8 HH 640 HR 510 Movable cabin Z800 Y1800 Spindle support 250 mm ISO 50 Immediately available!
used
Gantry milling machine GMB 2560 CNC Manufacturer: Fermat GC: 2023 Control Heidenhain ... TNC 640 Table dimensions ... 6000 x 2500mm Axis X ... 6000mm Distance between stand... 3200mm Passage between .dem table and crossbar... 1900mm ISO 50 Spindle speed ... 40-5500 rpm. Max. table load ... 22000kg Axis Y ... 3200mm Axis Z ... 1250mm Machine weight... 88000kg Main engine power ... 41kW Rapid traverse... 10m/min Total Power Requirement ... 83kVA Average of the grinding piece ... 500x450mm The machine is in good condition, possible to test under electricity.
used
spindle diameter: 130 mm x-travel: 12000 mm y-travel: 3500 mm Control: Hidenhain type: ITNC 530 ram: horizontal adjustment: 700 mm Spindle travel W-axis: 800 mm engine output: 52 kW turning speeds: 3000 U/min Plate area: 6000x4500 mm angular milling head: spindle stroke - max.: 700 mm rotary table:: 3000x3000 mm table load capacity: 40000 kp Tool changer: 40 Pos. coolant: magnetic cut-off: chip conveyor: central lubrication: total power requirement: 170 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Shell end mills, shell mill cutters, milling cutters, disc milling cutters, slot milling cutters -Disc milling cutter: 105 x 19 mm, cross-cut -Socket: Ø 27 mm -Weight: 0.8 kg
used
Retrofitted in 2005 electrical / CNC control Siemens 840 d Retrofitted in 2012 and 2019 mechanical what made. Technical datas: Rotary spindle speed: 1.25-600 tr/min Spindle maximum power: 55 kW 215 tr/min Horizontal run of the upright on the bench - X 15,000/30,000 mm *. * X travel 30,000 mm is for both machine Vertical stroke of carriage on upright - Y (mm) 5,600 mm Spindle stroke - 1,100 mm Z: Flowing stroke - w: 1,100 mm Advance - X: 3-5000 mm / min Feed - Y: 3-5000 mm / min Feedrate - Z: 1.5 2,500 mm / min Total weight: 100,000 kg Foundation pit OSTEO. for both machine Length x width x height: 40,000 x 5,000 x 1,800 mm all accessories are available and can be sold at extra costs. For both machines are the following attachments available: â?¢ Chip conveyor For both machines including lubrication and coolend unit for the cutting operation &a ...
used
oven 550 industrial 2x2x6m temperature range 100 - 550C Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel ...
used
Used CNC Floor type Horizontal Boring Machine Maker : HNK (Korea Maker) New : 2003 Model : HFB-180F Control : FANUC 16M main spec. Spindle dia :180mm X-axis Travel : 12,000 mm Y-axis Travel : 4,500 mm Z-axis Travel : 1,200 mm W-axis travel : 1,200 mm Z+W Total Travel : 2,400 mm Rotary Table size : 2,500 x 2,500 40 tons Load capacity 0.001 degree indexing Floor plate size : 4,500 x 7,000 mm Spindle Moror : 75Kw Spindle Rotate speed : 1-1,500 rpm Spindle taper : ISO 50 ATC: 40 With Chip conveyor, 2 Angle attachments.
used
WALDRICH SIEGEN HFB-200 CNC Horizontal Boring & Mill MC Built 1978 / 2007 X=15.000, Y=5.000, Z=1.500, W=1.200mm Spindle diam. 200mm ISO 50+60, 90kW SIEMENS 840 D ATC 90 Table 5.200x5.200mm, X travel 3.300mm max. loading 100 Ton Rotation 360.000° Floorplates 6.000 x 10.000mm Hydrostatic Many heads This machine was used in final cutting and boring, drilling of big vessel engine cylinder blocks in STX Engine. It can be done the straight and inclined direction drilling &boring. It means the spindle head can be tilted. It is very high accuracy machine. This machine is in assembled condition but not under power
used
PAMA 200 CNC Floor Type Horizontal Boring & Milling machine Built 1997 / 2013 X=16.000, Y=6.000, Z=1.330, W=830mm Spindle diam. 200mm ISO 50/60 Spindle RPM: 1-680 75HP CNC FANUC 31i-M Table 5.000x5.000mm, X travel 2.500mm max. loading 120 Ton Rotation 360.000° Floorplates 4.000 x 15.000mm Chip conveyor Angle head This machine disassembled end of 2021. It was in a very good condition.
used
Mitsubishi MAF 240/180B CNC Floor Type HBM, New 1980 (Recontrolled in 1999) Condition: Very Good Type of CNC Control: Gidding & Lewis 8000B CNC Control - Recontrolled 1999 Spindle Diameter: 7.08"(180mm) Milling spindle diameter: 9.44"(240mm) Vertical Head Travel, Y-Axis: 169"(4300mm) Horizontal Column Travel, X-Axis: 1200" (30500mm) Headstock Travel, Z-1 Axis: 47.24"(1200mm) Spindle Travel, Z-2 Axis: 47.24" Total Axial Travel: 94.49"(2400mm) Rapid Traverse, X&Y Axes: 315 IPM Rapid traverse, Z, W and U Axes: 197 IPM Spindle Taper: CAT #50 Spindle Speeds: 6-1200 RPM - (3-Steps) Max. Spindle Thrust: 11,000 Lbs Constant Power Range: 79-1200 RPM Rotary Table Manufacture and Model: Mitsubishi DIT-A21X30 Rotary Table Size: 82" x 118" (2100x3000mm T-Slotted Rotary Table Max. Weight Capacity: 30 Tons Rotary Table Type: Insliding Rotary Inslide Travel: 59" (1500mm) Rotary Ta ...
used
CNC Floor Type Boring & Milling Machine PAMA Speedram 1000 Manufactured new in 2008 - with only 4500 program run hours Heidenhain iTNC 530 CNC Control X 13000 mm Y 3000 mm Z 1000 mm W 700 mm Pama NC-Rotary travelling table Table size 2000 x 2200 mm Table load 16 t B-Axis 360°/0.001° with contour milling capability V-Axis table travel 2000 mm Boring spindle diameter 150 mm Spindle taper ISO 50 Spindle drive 37 KW Spindle speeds to 3500 rpm Floor plates Huron type universal head X,Y,Z hydrostatics Optical scales X,Y,Z,V Axes Linear magnetic scale W Axis Coolant through the spindle 30 bar with filtration unit Automatic attachment clamping on the ram PREPARED for ATC Excellent machine condition - Under power - Immediately available
used
For sale: San Rocco CNC boring mill type MEC 100 with Siemens 810 control. Longitudinal and transverse movement is 1,200 x 2,000 mm, table size is 1,100 x 1,300 mm and is equipped with a full-fledged C-axis / spindle diameter is 100 mm with ISO-50 holder. The drilling spindle movement is 700 mm, the maximum spindle speed is from 2 to 1,000 rpm in 4 stages. The machine is in good condition and has an X, Y and Z axis and a full-fledged C axis and a W axis (drilling spindle 700 mm) You can move 2 axes simultaneously. You can mill around on the machine. Can still be visited under electricity, subject to prior sale.
used
CNC Heidenhain TNC 426 with handwheel HR 410 X = 3500 mm Y = 2500 mm Z = 1250 mm W = 800 mm Table dimensions 1800 x 2200 mm Spindle diameter 130 mm Max. spindle speeds 2500 RPM External coolant 2-axis manual milling head TOS HUR 50 year 2004 almost unused.
used
Technical data of used Schiess Froriep Boring Machine: CNC: Siemens 840 D Maximum transversal travel X axis: 13.770 mm Maximum vertical travel Y axis: 5.000 mm Z axis: 1.780 mm W axis: 950 mm V axis rotating support plane: 2.000 mm Rotating table dimensions: 5.000 x 3.500 mm Fixed table dimensions: 7.500 x 4.300 mm Maximum permissible load on the table: 120 ton Spindle power: 100 kW Spindle revolutions per minute: 710 rpm
used
SCHARMANN HEAVYCUT 2 WFT 150 CNC Floor type Boring Mill Year 1978 Spindle Diameter: 5.9" (150mm) Milling Spindle Diameter: 11.02 (280mm) Spindle Taper: CAT 50 Ram Cross Section: 11.81" x 11.81" (300x300mm) Vertical Head Travel, Y-Axis: 137.79" (3500mm) Column Travel, X-Axis: 712.59" (18000mm) Quill Travel, Z-Axis: 23.43 (595mm) Ram Travel, W-Axis: 27.6" (700mm) Z & W Axis, Combined: 51.03" (1296mm) Spindle Speeds: 5.5-1000 RPM Spindle Feed Range: 0.003-240 IPM Rapid Traverse: 396 IPM Spindle Motor: 70 HP/ 105 HP EQUIPPED WITH: Heidenhain TNC 407 CNC Controls Ram and Spindle Travel Sliding Way Covers On X-Axis Bed Right Angle Head With 1 Degree Manual Indexing Hardened Ways Re-pained recently
used
1 x CNC table boring mill Wotan Rapid 1 Year of manufacture: overhauled / with new control system 2012 X- 2000mm Y-1600mm Z- 600mm W-1000mm B- 360 degrees Table clamping surface : 1250 x1600mm Table load: 6000 kg Spindle speed : 1600 rpm Control: Heidenhain it 530 Controlled axes 5
used
1 x CNC table boring mill Wotan Rapid 1 Year of construction: overhauled / with new control system 2008 X- 2000mm Y-1600mm Z- 600mm W-1000mm B- 360 degrees Table clamping surface : 1250 x1600mm Table load: 6000 kg Spindle speed : 1600 rpm Control: Heidenhain it 530 Controlled axes 5
used
CNC table drill TOS WHN 13 with quill Built in 1991 Control FAGOR 8055 Travel xyzw 3500/1850/1330/600 mm Table size 1800 x1800 mm. Machine immediately available and available. Dismantling and loading onto suitable trucks is cost-effective. Installation and commissioning on request.
used
CNC travelling column drilling-milling machine manufacturer FPT model Pragma M40 with control Fidia C20 with plate field 5000 x 2000 mm. Travel xyz 4000x2000x1200 mm. 2 pieces of universal heads BT50 / HSK63 both automatically swivel 2.5°. Machine immediately available and available. Dismantling and loading onto suitable trucks is cost-effective. Installation and commissioning on request.