1000 offers

maximum number of results exceeded > 1000
please refine your search

Category: 102
item-No.: 126869376
2002
29.000 €
-
CNC turning and milling center MAZAK SQT 200 M stock no. 1105-02454 category CNC turning and milling center brand MAZAK type SQT 200 M year 2002 State second-hand machine control CNC MAZATROL FUSION 640 T dialog storage France country of origin Japan shipping time immediately cargo basis EXW (Incoterms 2000) t slow technical details swing freely 360 mm turning length 1050 mm control MAZATROL FUSION 640 T dialog swing diameter 520 mm rapid traverse in X-and Z direction of 20 m / min feed diameter 250 mm rod diameter ...
Category: 105
item-No.: 126880000
-
used machinery auction RESALE 420 €
Land-de DE
Weight approx.: 900 kg Dimensions (l x w x h) approx.: 1400 x 1600 x 1700 mm Description: Hacksaws Machine with roller conveyor 2000 x 320mm, Cutting area 300mm round, Saw blade length 615mm, Feeder length 550mm
Category: 102
item-No.: 126869366
Manufacturer: DMG MORI Model: NTX 1000 Year of construction: 2012 Control: Siemens 840 DSL - operate Turning diameter [mm] approx. 370 mm Turning length [mm]: approx. 450 Spindle transmission rate [mm]: 65 Techonolgie: motor spindle Rpm: 6.000 rpm Power: 11 kW Drehoment: 223 NM C-axis: 0.001 Stangendruchlass: 65 mm Cylinder: hollow clamping cylinder : Voltage differential pressure Chuck I: Hainbuch clamping chuck II: Röhm DURO-NC 170 Counter spindle: Techonolgie: motor spindle Rpm: 6.000 rpm  ...
Category: 103
item-No.: 126880017
1989
used machinery auction RESALE 2.400 €
Land-de DE
Weight approx.: 7000 kg x-travel: 2400 mm y-travel: 1000 mm z-travel: 1500 mm control: ATEK 5000 Dimensions (l x w x h) approx.: 7000 x 4500 x 3400 mm no. of tools in magazin: 40 turning speed range: 20 - 2900 rpm rapid travel range: 8000 m/min table surface area l x w : 2200x700 mm feed range: 2 - 6000 mm/min tool taper: SK 50 total power requirement: 22 kW Description: REIDEN BF4 LHBZ CNC milling machine travels: » x = 2400 mm » y = 1000 mm » z = 1500 mm » b = +90 -90 degree swivel head automatic » feed ran ...
Category: 107
item-No.: 126869356
Technical data: -Drilling capacity in steel ST 60 32 mm -Drilling capacity in steel ST 60 45 mm -Spindle mount MT 4 -Drilling spindle stroke 140 mm -Throat depth 330 mm -Table with 2 T-slots 720 x 560 mm -maximum distance table - drill bit approx. 800 mm -Feed 0.1 - 0.2 - 0.3 - 0.36 mm / Rev -1 160-210 spindle speed infinitely variable - level U/min -Level 2 120-420 RPM -Level 3 210-725 RPM -Level 4 420-1530 RPM -Drive 400 V 3.0 kW -Coolant system - space requirement ap ...
Category: 104
item-No.: 126880019
1991
used machinery auction RESALE 21.000 €
Land-de DE
Weight approx.: 2700 kg grinding length: 1000 mm grinding diameter: 254 mm Dimensions (l x w x h) approx.: 3300 x 1800 x 1800 mm workpiece weight max.: 100 kg Description: JONES & SHIPMAN 1300 X /1000 Cylindrical Grinder Headstock Workpiece: - speeds: 30/450 r/min - centre height: 127 mm - swing angle right/left: 15°/90° Wheelhead (X-axis): - infeed total: 245 mm - max. programmable Ø-infeed rate: 100 mm/min - max. traverse speed: 5000 - 10000 mm/min - min. programmable increment (Ø): 0,001 mm - swivel range  ...
Category: 102
item-No.: 126869353
Manufacturer: Gildemeister Model: CTX 400 Year of construction: 2000 Control: HEIDENHAIN CNC pilot - turn plus Spindle transmission rate [mm]: 66 spindle: Speed: 5.000 rpm Power: 21 kW Torque: 240 NM Bar passage: 66 mm Position: C-axis Tool carrier (x/Z): Technology: Revolver with 12 stations Tool holder: 30 Milling operations: tool drive, each 2nd powered station X/Z axis travel: 220/635 mm Tailstock: Tailstock travel: 550 mm Recording: MK4 Equipment / accessories Chip management: swarf co ...
Category: 202
item-No.: 126880039
1991
used machinery auction RESALE 2.700 €
Land-de DE
serial number: 375 Weight approx.: 700 kg table length: 2600 mm Dimensions (l x w x h) approx.: 2600 x 1200 x 1700 mm main motor: 11 kW spindle diameter: 30 mm table depth: 350 - 900 mm spindle speed: 3000, 4500, 6000, 9000 Description: Table length 2600 mm, table width 350 mm, with extendable table extension up to approx. 900 mm (see photo), with digital display, motor power approx. 5.5 kW, electric height and swivel adjustment, spindle speed 3000, 4500, 6000, 9000 rpm, 30 mm mandrel, with HOLZ-HER ETZ 3-roller fe ...
Category: 101
item-No.: 126869339
Technical data: -Drilling capacity in steel ST 60 50 mm -Spindle mount Mt 5 -4 feeds 0.12; 0.19; 0.26, 0.40 mm / Rev -Drilling spindle stroke 240 mm -12 spindle speeds 56-1250 RPM -RADIUS 360 mm -Distance from base plate - spindle 740-1320 mm -MOT mot cross table. Round table 800 mm -Drive 400 V / 4,5 kW -Space requirement approx. B H 1200 x 2400 x D 1700 mm -Weight approx. 1700 kg
Category: 107
item-No.: 126880051
2014
used machinery auction RESALE 14.000 €
Land-de DE
Weight approx.: 500 kg Dimensions (l x w x h) approx.: 600 x 2000 x 1270 mm Description: GSW WV 25/80 Roll Feed. machine no.: M 2014-00463, strip width 250 mm, strip thickness 0,5 up to 4,0 mm, strip thickness with fully width 3,0 mm, cross section 250 x 3,5 mm, roller diameter 80 mm, height adjustment approx. +- 50 mm, noise level 70 db(A), type of drive three-phase servo motor, drive nominal torque 15 Nm, gear ratio 7, electrical connection 3 x 400 V, 50 Hz. The machine is equipped with Topochrom feed rollers, se ...
Category: 1406
item-No.: 126869337
Manufacturer BOA Enschede, Netherlands Type KT-1200 Year of construction 1992 Effective width 1.100 mm Feeding conveyor length 4.000 mm Elevating conveyor length 4.800 mm Height of driving axle over ground 2.950 mm
Category: 107
item-No.: 126880053
2014
used machinery auction RESALE 27.300 €
Land-de DE
Weight approx.: 1200 kg Dimensions (l x w x h) approx.: 1050 x 2250 x 1860 mm Description: GSW RMA 16/118 Straightening Machine. Machine no.: M 2014-00539, passage width max. 160 mm, strip thickness 1,0 up to 5,0 mm, strip cross section max. 160 x 4,0 mm, high edge up to 50 x 5,0 mm, material strength 520 N/mm², diameter of straightening roller 80 mm, distance between straightening rollers 130 mm, 11 straightening rollers, out-feed roller diameter 80 mm, 2 out-feed rollers, passage height over floor approx. 1200 m ...
Category: 107
item-No.: 126869302
Technical data: -Pressure capacity 150 t -Working width 4100 mm -Clearance between the stands 3100 mm -Table width 190 mm -Unloading 305 mm -Height approx. 370 mm -Feed speed approx. 70 mm / sec. -Working speed approx. 7 mm / sec. -Retraction speed approx. 60 mm / sec. -Stroke approx. 175 mm -Adjustment range fixed stops 120 mm -Drive: 400 V / approx. 15 kW -Oil approx. 300 l -Space requirement approx. B H 4500 x 2650 X 1800 mm -Weight a ...
Category: 109
item-No.: 126880061
1997
used machinery auction RESALE 1.400 €
Land-de DE
Weight approx.: 160 kg Dimensions (l x w x h) approx.: 550 x 800 x 1400 mm Description: Tube bending machine: - Two driven rollers with grooved surface - Manual feed of the upper roller Delivery travel 95 mm Shaft diameter 30 mm Shaft revolutions 6 rpm Roll diameter 132 mm Drive 0.75 kW Dimension L-B-H 550 x 800 x 1400 mm Weight 160 kg
Category: 502
item-No.: 126869298
Automatic baler Manufacturer: PAAL Type: PACOMAT III 65 C BH Year of manufacture: 2009 technical data: Pressing force: 63,3 t specific pressing force: 8.44 kg / cm² System pressure: 315 bar Power: 75 kW Total power: 92 kW, 175 A Capacity: approx. 310 m³/h Capacity at 35 kg / m³: approx. 10,5 t / h Filler: 1.600 x 720 mm Channel size: 750 x 1.000 mm Oil tank capacity: 2.200 LTR. Optional with infeed conveyor Manufacturer: PAAL Type: KEM 1500 Year of manufacture: 2009 t ...
Category: 201
item-No.: 126880072
-
used machinery auction RESALE 3.650 €
Land-de DE
Weight approx.: 350 kg Dimensions (l x w x h) approx.: 1300 x 800 x 1500 mm Description: Double Miter Band Saw Hydraulic Semiautomatic with: - Hydr. Vise - Material height button - Section monitoring by ammeter - Cutting pressure feed regulator - Belt speed 34/74 m / min - Miter cuts up to 60 ° left and 45 ° right - Patented, ball-bearing turntable for easy miter adjustment - Movable quick-release vice - Quick release lever - Automatic cooling Cutting area at 90 degrees: around 250 mm Cutting area at 90 degrees:  ...
Category: 101
item-No.: 126869276
Technical data: -Drilling capacity in steel ST 60 32 mm -Drilling capacity in steel ST 60 40 mm -Long spindle MK 3 -Thread cutting device -Spindle speed infinitely variable - level 1. 160-1125 U/min -Level 2. 320-2250 U/min -Drilling spindle stroke 120 mm -Feed 0.1 + 0.2 + 0.3 mm / Rev -Unloading 293 mm -Column diameter 115 mm -Table size 420 x 380 mm -E. footswitch -Coolant system -Machine vise -Keyless drill Chuck 1-13 mm -20 St. div. HSS drill bit approx. 8 ...
Category: 107
item-No.: 126879916
2006
used machinery auction RESALE 22.500 €
Land-ch CH
Weight approx.: 15500 kg Dimensions (l x w x h) approx.: 0 x 0 x 0 mm Description: Laser cutting machine was rebuilt and revised in 2013, operating hours according to report from 16 June 2017 approx. 15025h, cutting hours 6291h, travel paths/ cutting ranges X= 1562mm, Y= 772mm, Z= 100mm, max. plate size 752x1542mm, load capacities infeed table= 300 kg, cutting table= 80 kg, position deviation PA= +/-0,1mm, position scattering range = +/- 0,05mm, position speed (X+Y) = 100m/min, max. laser capacity 2200W, material t ...
Category: 804
item-No.: 126869269
HEIDELBERG CD74-4+LX-F(60 x 74cm), Age c.2002, serial no.450180, circa 159 million, CP2000, Alcolor with Vario dampening, Autoplate, Preset feeder and delivery, Anti-static in feeder, Technotrans Beta C Combistar refrig/recirc with ink temp control, Alcosmart AZR, Tresu cameracle coater, Heidelberg drystar 2000 IR dryer, Steel plate in feeder/delivery, Heidelebrg Powderstar (Betatronic CD74) spray, Heidelberg Airstar, Venturi air guide system, Non stop delivery, Extended delivery (X2)
Category: 21
item-No.: 126879941
1988
used machinery auction RESALE 200 €
Land-de DE
Weight approx.: 150 kg Dimensions (l x w x h) approx.: 6400 x 1500 x 1200 mm portal passage: 630 mm Description: Max. width 630 mm, feed speed approx. 7 m/min, incl. deposit tables, total length 6400 mm and width 1500 mm
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more types: