used FAMU PARPAS CNC Portal Milling Machines

Excellent general condition. Used by plastic mold makers mainly for 3D graphite-carbon tool models and engraving work. Low cutting forces, low machine load... Travels x=1200 y=800 z=500 Spindle speed 0 - 8000 rpm / drive power main spindle 11 kW feed speed 0 - 30 m/min / Table dimensions 1320 x 800mm Table load max. 2,000kg / 20-fold tool changer / max Wzg diameter 63mm / WZG length 200mm / tool holder SK 40 / 3D probe, Fabr. Heidenhain, Type TS 220 / Coolant device / chip conveyor / extraction (optional) Complete enclosure Heidenhain control type TNC 426 PB digital / electronic handwheel Heidenhain HR 410

Excellent general condition. Used in plastic mold makers mainly for 3D graphite-carbon tool models and engraving work. Low cutting strengths, low machine load... Travel x=1200 y=800 z=500 Spindle speed 0 - 8000 rpm / Drive power main spindle 11 kW feed speed 0 - 30 m/min / table dimensions 1320 x 800mm Table load max. 2,000kg / 20-fold tool changer / max wzg diameter 63mm / WZG Long 200mm / tool holder SK 40 / 3D probe, Fabr. Heidenhain, type TS 220 / Cooling agent equipment / Spaenefoerderer / Suction (optional) Complete enclosure Heidenhain Control type TNC 426 PB digital / Electronic handwheel Heidenhain HR 410

Machining center bridge-type 5-axis FAMU Active Five 2000 Make: FAMU Model: Active Five 2000 YEAR 2008 X-AXIS TRAVEL 2000 mm Y-AXIS TRAVEL 1800 mm Z-AXIS TRAVEL 850 mm RAPID FEEDS X-Y-Z 30 m/min SPINDLE 0 – 22000 rpm; 30 kW; HSK A63 TABLE SIZE 2100 x 1000 mm MAX ADMITTED LOAD 3000 Kg HIGH PRESSURE COOLANT 50 Bar TOOL MAGAZINE CHAIN-TYPE ; 30 POS CONTROL UNIT HEIDENHAIN iTNC 530 WEIGHT 19500 Kg OVERALL DIMENSIONS 5850 x 3880 x 3860 mm ACCESSORIES PORTABLE HANDWHEEL ; SWARF CONVEYOR ; LINEAR SCALES NOTE TOTAL RETROFIT ON CONTINUOUS POSITIONING A and B-AXIS HEAD AND ON ELECTRO SPINDLE (YEAR 2021)

CNC VERTICAL MACHINING CENTER Good condition Heidenhain control X axis stroke 800 mm Y-axis stroke 600 mm Z axis stroke 450 mm Spindle speed 30,000 rpm Rapid X Y X 40.000 mm/min HSK spindle connection Table dimensions 600 x 900 mm ATC 20 tools Chip Evacuator Accessories

This FAMU PHS 680 Machining centers (vertical) machine was manufactured in 2008 in Italy. The machine has a spindle speed of 30000 rpm. It is equipped with a CNC Heidenhain control unit and has 3 axis.

: FRÄSMASCHINE : an Bastler x-travel: 700 mm y-travel: 500 mm z-travel: 500 mm max. swing diameter: 8000 mm tool taper: SK 40 : weight of the machine ca.: 5 t control: FIDIA ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++ The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-travel: 2500mm, y-travel: 970mm, z-travel: 1000mm, table dimensions: 2920x920mm, connected load: 52kVA, controls: HEIDENHAIN iTNC 530, weight: 15t.

SELCA S3045 Year of construction 2001 18,000 rpm electrospindle X axis travel 1500 mm Y axis travel 710 mm Z axis travel 550 mm Flat guides Tool magazine 24 positions Optical lines

CNC DELECTRON AZ102 Year of construction 1997 Rotating table mm 1800 x 1600 Colgar T- slot dimension mm 28 T- slot center distance mm 250 Longitudinal stroke mm 6.000 Vertical stroke mm 2.000 Cross stroke mm 1000 Axis feed mm / 1 0: 10000 (0: 15000) Spindle diameter in the front support mm 85 Spindle taper ISO 50 Rotating axis coaxial to the ram spindle - continuous working - 360,000 Automatic universal head - vertical / horizontal - indexed ISO 50 System for tool coolant outside the spindle

x-travel:2000 mm y-travel:1000 mm z-travel:1050 mm table clamping surface::2.400 x 1.000 mm control:HEIDENHAIN TNC 426 CB turning speeds:20 - 5000 1/min tool taper:SK 50 spindle:22 kW total power requirement:50 kVA weight of the machine ca.:10 t dimensions of the machine ca.:5 x 3 x 3 m CNC universal bed milling machine, direct measuring system, coolant device, cover chip conveyer head is swivelling automaticaly horizontal / vertical head is swivelling semiautomaticaly 2,5 degrees over inching head is swivelling manually on the 5 th axis with display on screen approx. 59.250 h hours "machine on", approx. 9.656 h hours "programm on"

CYLINDRICAL GRINDING MACHINE Used Condition - Totally Reconditioned Excellent Condition Control type Siemens Sinumerik 840C Distance between centers 700 mm Center height 185 mm diameter of the rotating piece Ø 360 mm table stroke 820 mm Table translation speed (Z) 0-10 m/min Max. grinding wheel head stroke 500 mm Grinding wheel head translation speed (X) 0-10 m/min Grinding wheel dimensions left 508x203x76 mm Max. grinding wheel dimensions right 450x127x50 mm Grinding wheel engine power 10 hp Workpiece head spindle speed 0-600 rpm Grinding wheel spindle speed 0-2.880 rpm ISO 50 inner spindle head spindle Internal tailstock cone Morse 4

Stylus grinding machine PARPAS Type AU Fabr. No. 854/36 Year of construction 1971 Grinding wheel diameter 100 mm Grinding spindle speed approx. 3500 rpm. Motor power approx. 0.55 kW Mains connection 380 Volt, 50 Hz - Holder for collets (system DECKEL with S20x2) - Collet 15.0 mm- Diamant grinding wheel dresser for the grinding wheel end side Space requirement L x W x H 700 x 350 x 450 mm Weight approx. 80 kg good condition; used

x-travel: 3500 mm y-travel: 1083 mm z-travel: 1074 mm control: HEIDENHAIN iTNC 530 HSCI clamping table: - surface area: 4.000 x 1.000 mm Thread bore with fitting: - Feeds: - X-, Y- and Z-axis, stepless: 2 - 30.000 mm/min rapid travel x/y/z: 30 m/min Max. feed force of axis: 10.000 N 2-axis Milling Head: - 2-axis milling head TUB-E92 with power on: - Torque-Motors for 5-axis-simultaneos processing: - capacity at 100% load: 29 kW Speed stepless: 2- 30.000 max. torque: 92 Nm Max. torque: 60 min-1 tool taper: HSK 62A-DIN 69893 automatic tool changer ATC: - Tool places: 30 diameter of tools max.: 90 mm workpiece length: 320 mm weight of tools max.: 8 kg changing positions: vertikal electrical supply data: - capacity: 120 A voltage: 400 V operating frequency: 50 Hz total power requirement: 29 kW weight of the machine ca.: 28 t dimensions of the machine ca.: 8,3 x 6,7 x 3,6 m Guides, drive and  ...

TECHNICAL SHEET OMV PARPAS PHS 916 MACHINING CENTER Government unit: HEIDENHAIN 530 RACING X axis: 1600 Y axis: 900 Z axis: 650 SPINDLE Spindle: 16000 Spindle connection: DIN 6987-1 WAREHOUSE ATC Number of tools: 50 REFRIGERANT Pressure: 50 Cooling tank: PAPER FILTER

TECHNICAL DATASHEET PORTAL WORKING CENTER PARPAS FAMU PHS680 Government unit: Heidenhain RACING X axis: 800 Y axis: 600 Z axis: 450 TABLE Length of the table: 600 Width of the table: 900 Distance between table top and spindle nose: 720 SPINDLE Surface of the table: 600x900 Max.weight piece: 1000 Spindle: 36000 Spindle connection: HSK 50E Pair (cont. / 10 min): 7 QUICK MOVEMENT Rapid movement of the X axis: 40000 Rapid movement of the Y axis: 40000 Rapid movement of the Z axis: 40000 WAREHOUSE ATC Number of tools: 20 Tool selection method: Random REFRIGERANT Pressure: 20 Cooling tank: 200 MACHINE DIMENSIONS Height: 2820 Width: 2870 Depth: 1984 Weight: 6000

Number three pallets of size 1250 mm by 1000 mm. PALLETS are set up with FCS drilling directly on the work surface. Axis travels: X 2500 mm, Y 1200 mm, Z 1200 mm Maximum workpiece size machinable on the five axes diameter 1480 mm 20,000-rpm spindle, recently replaced, current working hours 5,000. 120-place tool magazine Machine availability to be agreed upon

x-travel: 3500 mm y-travel: 1083 mm z-travel: 1074 mm control: HEIDENHAIN iTNC 530 HSCI clamping table: - surface area: 4.000 x 1.000 mm Thread bore with fitting: - Feeds: - X-, Y- and Z-axis, stepless: 2 - 30.000 mm/min rapid travel x/y/z: 30 m/min Max. feed force of axis: 10.000 N 2-axis Milling Head: - 2-axis milling head TUB-E92 with power on: - Torque-Motors for 5-axis-simultaneos processing: - capacity at 100% load: 29 kW Speed stepless: 2- 30.000 max. torque: 92 Nm Max. torque: 60 min-1 tool taper: HSK 62A-DIN 69893 automatic tool changer ATC: - Tool places: 30 diameter of tools max.: 90 mm workpiece length: 320 mm weight of tools max.: 8 kg changing positions: vertikal electrical supply data: - capacity: 120 A voltage: 400 V operating frequency: 50 Hz total power requirement: 29 kW weight of the machine ca.: 28 t dimensions of the machine ca.: 8,3 x 6,7 x 3,6 m GEquipment • Ma ...

Important and outstanding design features of the RaptorX-SL with steel substructure in gantry design RaptorX-SL1200/S15 The range of applications of a RaptorX-SL CNC Fraesmaschine is variable due to the adjustable working area (through-lasshoehe under Bruecke: 150mm, 300mm or 400mm ) and the traversing height of 300mm in the Z-axis (at no extra charge) extremely large. Special size up to 17,500 mm (on one piece) x 3000 mm x 600 mm are feasible ! If you are interested please ask ! This way you are able to process plate materials with the greatest stability of the Z-axis just as accurately as 200mm high 3D-Koerper. Use the system as a plasma cutting system or waterjet cutting system, appropriate extensions are available. In the middle range of the machine (between the foot tubes) you can even process parts up to a height of 850mm (beam rail etc. ) or 3D body up to about 400mm h ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

5 axis CNC – portal profile machining center for all materials - aluminum - steel - stainless steel - plastics - non-ferrous metals. Drilling + tapping, flow drilling, milling + thread milling, as well as sawing at free angles – for example, steel profile saws up to 6 mm wall thickness Largest saw blade diameter 500 mm Largest machining length 7,000 mm Largest workpiece cross-section 650 x H 300 mm Working range in five-axis operation 6,400 mm x 480 x H 300 mm Spindle drive power 17 kW at 100% ED Milling spindle speeds up to 24,000 rpm Moving tool magazine for 12 tools Tool holder HSK 63 Rapid speeds up to 100 m/min / acceleration 2.5 G Space requirement (including control cabinet and control panel) approx. 9 m x 2.5 m x H 2.6 m Weight approx. 5,000 kg. equipment: - OSAI® CNC control - YASKAWA® feed drives and feed controllers - HITECO® milling spindle wit ...

X-axis: 13,000 mm Y-axis: 4,500 mm Z-axis: 1,000 mm Distance between stand: 6,500 mm C-axis: 190º A-axis: 110º Rapid speed XYZ: 15,000 mm/min. Rapid response AC: 10 tpm CNC control: Siemens 840D Spindle mounting: HSK A63 Spindle speeds: 30,000 rpm. Spindle power: 20 kW Tool changer: 20 positions Torrestool tables: 16 pieces X-axis: 11,500 mm Y-axis: 3,500 mm Z-axis: 750 mm Country of origin Spain Machine dimensions LxWxH: 19,000 x 11,000 x 6770 mm Machine weight: 70,000 kg

Warehouse number: 3686 PROCESSING Manufacturer: Takumi , Type: B8 Machine NO.: P0127, Year of construction: 2002 Specifications: Table size 1320 x 800 mm Longitudinal movement (X) 1200 mm Transverse movement (Y) 800 mm Vertical movement (Z) 500 mm Spindle speeds 20,000 rpm Spindle motor 15 Kw Tool changer 20 places Tool holder HSK-60A Rapid traverse XYZ 30 m/min Control Siemens 840D Fabr. Controlled in axes 3 Portal Type Accessories: Cooling water system. Length: 3550 mm, Høhe: 2770 mm, Width: 2260 mm, Weight: 6.850 kg

First commissioning: 2016 Control: Heidenhain iTNC 530 incl. handwheel HR 520 X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 400 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 min-1 Torque: 95 Nm Tool holder: HSK 63A Tool tensioning: hydraulic Coolant supply: outside and inside Blowing air: Outdoor Drives Linear axes Feed speed X-, Y-, Z-axis: up to 60 m/min Axle acceleration X-, Y-, Z-axis: up to 5 m/s2 Connection data Connected load: 190 kVa Fuse: 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 9,000 x 5,650 mm Total weight: approx. 55,000 kg Colour Housing, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green  ...

First commissioned: 2006 Control: Fidia C20 incl. handwheel X-axis: approx. 7,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,751 mm A-axis: + 125° / - 95° C-axis: ± 275° Clamping table Clamping surface: approx. 6,000 x 2,000 x 400 mm Head Spindle power: 20 kW Spindle speed: max. 20,000 min-1 Tool holder: HSK 63A Tool tensioning: hydraulic Drives Linear axes Feed speed X-, Y-, Z-axis: 65 m/min Axle acceleration X-, Y-, Z-axis: 5 m/s2 Connection data Connected load: approx. 150 KW Dimensions, weights Space required Machine with protective cabin Dimensions: approx. 12,200 x 6,300 x 5,800 mm Total weight: approx. 105,000 kg Auxiliary - 20-fold tool changer - Engine room surveillance (camera) Options at extra cost: - Renishaw RMP60 probe - Fidia HMS System Condition of the machine Fully functional, very good condition