falcon used for sale

Falcon fryer Model: G1860 Serial: F211990 Stainless, single tank with twin basket, 24L oil capacity, 32.2Kw, natural gas

Surface Grinding Machine CHEVALIER FSG-3A1224H, capacity 600x300 mm. Automatic cycle, Max working dimensions: 600x300 mm, Longitudinal travel x axis: 700 mm, Cross travel y axis: 305 mm, Clearance between worktable and spindle axis: 650 mm, Feed rate x axis: 2525 m/1, Feed rate y axes: 0,5 - 1 m/1, Wheel speed: 1450 rpm, Wheel dimension: 355x50x127 mm, Spindle motor power: 3,7 Kw, Weight: 2.200 Kg, Accessories: Magnetic plate, Auto cycle

Manufacturer: Falconi Leistenspritzmaschine, Type: Profiplus, Year: 2007, Control: Programm, Work piece width min-max mm: 10-240, Min.-max. workpiece length in mm: 200, Min.-max. workpiece height in mm: 10-80, Working width mm: 300, work piece detection: yes, Conveyour system: Band/Rolle, Spraying stations: 5, Laquer circles: 1, Laquer system - airless: yes, Laquer recharging: no, Dry exhauster: yes, Feeding belt mm: 400, Feeding speed m/min: 10-60, Number of units: 5, Feeding speed continous adjustable: yes, Feeding speed continous adjustable: yes, Year :2007

Micro hardness tester Vickers HV0,001 to HV 30 (depending on type) from 1 gram - all force levels force-controlled The FALCON 400 series are micro-hardness testers for a test force range of 0.001 to 30 kgf (depending on the type) for the micro Vickers, Knoop and Micro-Brinell hardness testing methods. The unique test force load system includes an electronic control system in the closed control circuit and sensor technology with force feedback. In addition to the electro-mechanical test force load, the FALCON is equipped with first-class mechanical and optical components. The innovative software functions of the I-Touch™ "control" allows the storage of results, creation and storage of test programs, overwashing of results (limit input), conversion to other hardness scales and curvature corrections for measurement on unplanned test surfaces. The digital / optical hardness impressio ...

The FALCON 500 series is a new generation of micro Vickers / macro Vickers / micro Brinell hardness testing machines with integrated load cell and test loads of Vickers / Knoop (depending on type): 1 g 62.5 kg (also in one device) The device improves the conventional hardness testing and is aimed at the reduction of operator influence on the test results. The unique system to the test load application includes an electronically controlled application of force and excellent force sensor technology for absolute accuracy. Continue to the FALCON hardness testing machine offers a superior quality of mechanical and optical components and makes it to the reference instrument of this class. The innovative hardness testing software IMPRESSIONS with "Workflow control" allows the storing of results, creation, storing programs Quality at a fair price - approximately 30% cheaper compared to  ...

used Treif Falcon portion cutter incl. scale and the sorting station, year of construction 2006, portioning to exact weights, 360° scan for bone-in and boneless products, max. infeed length of 820 mm, depending on the product up to 240 portions per minute, the machine is equipped with a smooth curved blade for products without bones, bone-in version optionally available, products up to -3° C. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

used Treif Falcon portion cutter incl. scale and the sorting station, year of construction 2006, portioning to exact weights, 360° scan for bone-in and boneless products, max. infeed length of 820 mm, depending on the product up to 240 portions per minute, the machine is equipped with a smooth curved blade for products without bones, bone-in version optionally available, products up to -3° C. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Treif Falcon portion cutter with check weigher and sorting station, year of construction 2006, portioning to exact weights, 360° scan for bone-in and boneless products, max. infeed length of 820 mm, depending on the product up to 240 portions per minute, products up to -3° C, the machine is currently equipped for bonless products.

Treif Falcon Conti Slicer Good condition 2008 Serial: 4610S4.61938.104695

We are selling here a slicer from the manufacturer Treif, type Falcon in a good used and functional condition. The machine was built in 2008, runs on 380-480 volts, 7.0 kW, completely stainless steel, inlet/outlet conveyor, programmable, touch PC control, workshop tested, immediately ready for use, dimensions W/D/H 460/130/180 cm, others on request.

Vacuum chamber packaging machine, make Henkelmann, type Falcon 80, year 2019, Technical specifications, Chamber dimensions (WxLxH): 510 x 760 x 235 mm, Sealing bar front 760 mm / right 510 mm, BUSCH high-speed vacuum pump: 100 m³/h, Connection value: 2.3 kW, power: Machine cycle: 15 - 40 seconds, Dimensions / weight: (WxLxH): 820 x 900 x 1070 mm, 227 kg

Vickers hardness tester of the extra class Modular design - as stand alone hearing tester or as a fully automatic machine. cheapest fully automatic machine worldwide As a full automatic incl. - 6-fold turret - 5 MP camera - 2 lenses (2 more optional) - motorized XY table - Overview camera - first-class hardness testing software IMPRESSIONS - incl. automatic hardness course CHD, NHT, RHT - additional software - modules for 2D / 3D mapping, screw testing ISO898, edge finishing, etc. - motorized lifting spindle - Autofocus, auto brightness + contrast ... This is THE quality machine at a fair price request now without obligation!

Here Privacy policy Information on the collection of personal data In this privacy policy, we would like to explain how we handle the personal data that is transmitted to us when using our services. Personal data is all data that can be related to you personally, e.g. name, address, e-mail addresses or user behaviour. Unless otherwise stated below, the provision of your personal data is not required by law or contract, nor is it necessary for the conclusion of a contract. You are not obliged to provide the data. Failure to provide it will have no consequences. This only applies unless otherwise specified in the subsequent processing operations. Controller pursuant to Article 4 No. 7 GDPR and Data Protection Officer: The person responsible for the processing of your data is: VOSS GmbH & Co. KG Ohrstedt-Bhf. North 5 25885 Wester-Ohrstedt Germany Phone: 04847 8068-0  ...

Pressure:175 t chamfer lenght:4100 mm distance between columns:3600 mm column arm:410 mm ram stroke speed:180 mm/sec return speed:135 mm/sec working speed:10 mm/sec work stroke:275 mm oil volume:200 l dayligth:550 mm table height:900 mm table width:90 mm total power requirement:15 kW weight of the machine ca.:12000 kg dimensions of the machine ca.:5100 x 2150 x 2850 mm

asdfasdfasdf

saw blade diameter: 350 x 32 x 2,5 mm 2 speeds: 30/60 UpM vice: 130 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 130x80 mm : 100 mm : 85 mm : 90x80 mm : 75 mm : 75 mm : 90x65 mm total power requirement: 1,1/2,2 kW weight: 220 kg Equipment: - including machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 100 mm capacity 90 degrees: flat: 130 x 80 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: square: 85 mm capacity 60 degrees: flat: 90 x 80 mm clamping range: 130 mm turning speeds: 30 / 60 U/min dimensions of saw-blade: 350 x 32 x 2,5 mm total power requirement: 1,1 / 2,2 kW weight of the machine ca.: 0,22 t dimensions of the machine ca.: 1200 x 860 x 900 m Special price: instead of 3997, -EUR now 3399, -EUR Manual miter saw for miter cuts from 45 ° right to 45 ° left, with high sawing performance. Made of robust cast iron, practical and safe for every cut. Basic equipment: externally adjustable coupling Locking device with a vice Can be moved on a prismatic guide with an adjustable bar Fixed clamps of the vice with axial adjustment for clamping the workpiece in the immediate vicinity ...

pressure: 60 t chamfer lenght: 2100 mm distance between columns: 1700 mm column arm: 410 mm ram stroke speed: 200 mm/sec return speed: 165 mm/sec work speed: 14,0 mm/sec work stroke: 275 mm dayligth: 530 mm table height: 900 mm table width: 90,0 mm oil volume: 150 ltr. voltage: 400 Volt total power requirement: 7,5 kW weight: 5640 kg range L-W-H: 3012x1960x2750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 175 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 180 mm/sec return speed: 135 mm/sec work speed: 10,0 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 90,0 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 15,0 kW weight: 11.950 kg range L-W-H: 5100 x 2150 x 2850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 x 32 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 100 mm capacity 90 degrees: flat: 130 x 80 mm capacity 45 degrees: round: 100 mm links capacity 45 degrees: round: 75 mm rechts 0: 30 / 60 U/min. dimensions of saw-blade: 350 x 32 mm weight of the machine ca.: 220 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 220 t chamfer lenght: 3760 mm distance between columns: 3250 mm column arm: 410 mm ram stroke speed: 180 mm/sec return speed: 160 mm/sec work speed: 10,0 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 160 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18,5 kW weight: 12.906 kg range L-W-H: 5100 x 2250 x 2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 175 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 180 mm/sec return speed: 135 mm/sec work speed: 10,0 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 90,0 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 15,0 kW weight: 9.450 kg range L-W-H: 4.250x2.150x2.800 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X ...

pressure: 100 t chamfer lenght: 2600 mm distance between columns: 2200 mm column arm: 410 mm ram stroke speed: 200 mm/sec return speed: 155 mm/sec work speed: 9,5 mm/sec work stroke: 275 mm dayligth: 530 mm table height: 900 mm table width: 90,0 mm oil volume: 150 ltr. voltage: 400 Volt total power requirement: 7,5 kW weight: 6.850 kg range L-W-H: 3.750x1.950x2.800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 t chamfer lenght: 1270 mm distance between columns: 1000 mm column arm: 410 mm ram stroke speed: 160 mm/sec return speed: 165 mm/sec work speed: 10 mm/sec work stroke: 275 mm dayligth: 530 mm table height: 900 mm table width: 90,0 mm oil volume: 150 ltr. voltage: 400 V engine output: 7,5 kW back stop - adjustable: 0 - 500 mm Weight: 4.320 kg range L-W-H: 2.250x1.960x2.750 mm -------------------------- Press brake with optional equipment installation height / Cylinder as well as increased bending beam velocities -------------------------- Facilities: - DELEM - CNC ER 70 graphics controller - Motion control: Y1 - Y2 - X - R axes - Back gauge with X-axis 800 mm, R = 250 mm with 2 gauge fingers, ball screws - Quick change punch holder AMADA Promecam - Rehfuss-top tool, ground version - Universal die block 60x60 mm with 4V in the die shoe - SIEMENS - electrical system - BOSCH /  ...

pressure: 40 t chamfer lenght: 1270 mm distance between columns: 1050 mm column arm: 350 mm dayligth: 387 mm max. ram stroke: 170 mm feed down: 140 mm/sec feed up: 170 mm/sec pressing speed: 17 mm/sec main drive: 5,5 kW table height: 850 mm back stop - adjustable: 800 mm adjustment speed: 230 mm/min total power requirement: 5,5 kW weight of the machine ca.: 3,22 To. dimensions of the machine ca.: 2,15 x 2,3 x 1,65 m -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 58T (TouchScreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning contro ...

pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 180 mm/sec return speed: 160 mm/sec work speed: 11,0 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 160 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18,5 kW weight: 13.800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 135 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 200 mm/sec return speed: 120 mm/sec work speed: 10,0 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 90,0 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 11,0 kW weight: 8.650 kg range L-W-H: 4.250 x 2.050 x 2.800 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface - Motorized backgauge with R-axis, on recirculating ball spindles  ...

pressure: 135 t chamfer lenght: 3100 mm distance between columns: 2600 mm dayligth: 550 mm throat: 410 mm stroke: 275 mm working feed: 10,0 mm/sec return speed: 120,0 mm/sec work height max.: 900 mm quantity of oil: 200 l Control: DELEM DA 58 T total power requirement: 11 kW weight of the machine ca.: 8650 kg dimensions: 4250 x 2050 x 2800 mm -------------------------------------------------- --------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- --------- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen 2D graphical programming 17 TFT color screen with high resolution Bending sequence calculation Product programming and real size display USB interface intuitive, graphical entry of profiles Automatic calculation of features:  ...

saw blade diameter: 275 mm capacity 90 degrees: round: 80 mm capacity 90 degrees: square: 70 mm capacity 90 degrees: flat: 100 x 60 mm capacity 45 degrees: round: 70 mm capacity 45 degrees: square: 60 mm capacity 60 degrees: flat: 80 x 50 mm clamping range: 110 mm turning speeds: 45 / 90 U/min dimensions of saw-blade: mm total power requirement: 0,5 kW weight of the machine ca.: 0,07 t dimensions of the machine ca.: 900 x 700 x 1600 m Manual cold circular saw with: - Machine base - Support rail 1500mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 175 t chamfer lenght: 3100 mm distance between columns: 2600 mm dayligth: 550 mm throat: 410 mm stroke: 275 mm working feed: 10 mm/sec return speed: 135 mm/sec work height max.: 900 mm quantity of oil: 200 l total power requirement: 15 kW weight of the machine ca.: 9450 kg - DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system A with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH /  ...

pressure: 100 t chamfer lenght: 2600 mm distance between columns: 2200 mm column arm: 410 mm ram stroke speed: 200 mm/sec return speed: 155 mm/sec work speed: 9,5 mm/sec work stroke: 275 mm dayligth: 530 mm table height: 900 mm table width: 90,0 mm oil volume: 150 ltr. voltage: 400 Volt total power requirement: 7,5 kW weight: 6.850 kg range L-W-H: 3.750x1.950x2.800 mm Current new price ~ 60.000 euros Special price on request from a maintenance workshop - good condition () -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-56 (ER 70) 2D graphical programming 10.4 TFT color screen with high resolution Bending sequence calculation USB interface - Swiveling cont ...

NEMESIS 5100 - Universal hardness tester with turret head (saves changing indenting bodies and lenses) THE ultimate universal hardness testing machine - all-rounder: stand-alone or fully automatic hardness gradients (requires motor XY table) This hardness testing machine sets the reference in the current state of the art. The basic function is based on a test head lowering to the test piece on which a turret head with up to 8 positions is installed. This is particularly advantageous if the test piece is very heavy or if an automatic feeding system is to be used. In addition, the user does not have to worry about focusing: The automatism finds the correct test height / focus distance automatically (detecting search). The desired hardness test method can be conveniently selected on the large touchscreen monitor. Now the operator presses START and the automated test begins: - aut ...