We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Table size 2800x1500 Number of table 2
used
Diaphragm press Friz type MFP 15/27 • Cover table size (mm): 2700 x 1500
Diaphragm press Friz type MFP 15/27 • Cover table size (mm): 2700 x 1500
used
I will sell the membrane press Friz optimat MFP with a boot device.
used
Max. working width: 1000mm, feed rate: 5-20m/min, height: 2200mm, length: 4000mm, weight: 3.3t, with documentation, was maintained regularly.
used
Manufacturer: Friz, Year: 1997, Type: MFP 22/14/11, Press length mm: 1100, Pressing width mm: 800, Work piece thickness max mm: 95, Year :1997
used
Manufacturer: Friz, Year: 1996, Type: MFP 12 Masterform, Number of tables: 1, Heating system: elektrisch, Nutzfläche : 1.100 x 2.400, Press length mm: 1.400, Pressing width mm: 2.700, Work piece thickness max mm: 300, Membrane: yes, Kw Heizleistung obere Heizplatte: oben 24 + unten 11, Membrane: yes, Size of heating plate mm: 1.400 x 2.700, Pressing cylinder: 6, Landing opening mm: 315, Overall pressing pressure kN: 320 bar, Weight approx. kg: 20.000, Year :1996
used
Manufacturer: Friz , Type: Profi PWP 120/42, Year: 2006, Control: yes, Suitable for veneer and paper: 2D Folie, Film width mm: 450, Gluing system Pu: PUR, Feeding speed min-max m/min: 6 - 40, Feeding speed continous adjustable: yes, roller diameter mm: 152, Work piece width min-max mm: 10 - 450, Min.-max. workpiece length in mm: min 2500, Min.-max. workpiece height in mm: 6 - 150, Overhauled on: 35 Betriebsstunden, Year :2006
used
Power resistor, wire potentiometer, resistor, braking resistor, tube fixed resistor -Manufacturer: Frizlen, power resistor type RZM20-1K/4.7K -Synchronous motor: Berger Lahr RSM 47/8 -Voltage: 220V 50Hz 375 rpm -Dimensions: 220/110/95 mm -Weight: 0.9 kg
used
Power resistor, wire potentiometer, resistor, braking resistor, tube fixed resistor -Manufacturer: Frizlen, power resistor -Type: RZM10-4.7/1K -Voltage: 220V / 50Hz -Dimensions: 220/110/95 mm -Weight: 0.9 kg
used
Power resistor, wire potentiometer, resistor, braking resistor, solid tube resistor -Manufacturer: Frizlen, power resistance -Type: FZDPQ 200x35 -Power: 450 W 4.0 ohms -Dimensions: 250/140/100 mm -Weight: 1.7 kg
used
Power resistor, wire potentiometer, resistor, braking resistor -Frizlen power resistor: GWADU 216x120-20 -Resistance: 300 W 20 ohms -Dimensions: 240/140/60 mm -Weight: 3 kg
used
Power resistor, wire potentiometer, resistor, braking resistor -Frizlen power resistor: GWADU 320x80-1.7 -Resistance: 300 W 1.7 ohms -Dimensions: 320/80/H15 mm -Weight: 0.8 kg
used
Braking resistor, charging resistor, damping resistor, filter resistor for crane systems, bridge crane, gantry crane, power resistor, steel mesh fixed resistor device, steel mesh resistor -Frizlen steel grid fixed resistor device: Art.-ID 56489 -P: 9 kW -R: 1 ohm -E: 2700 kWs -Price: per piece -Number: 2 pieces -Dimensions: 600/480/H450 mm -Weight: 42 kg
used
4 Roller Glue Applicator Make Friz Working width approx. 2600 mm 4 Roller Glue Applicator 2 rubberized rollers 2 steel rollers
used
Description: Gluing System PUR Pressure rollers yes Premelter for polyurethane glue yes Premelter for polyurethane glue WPR Safety standard CE mark yes Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
used
Functional principle continuous Plate length mm 10000 Plate width mm 6600 Workpiece thickness max mm 45 Pressing force t 10 Further technical data Workpiece thickness min mm 25 Input length min mm 450 Fugue glue press Yes The technical data are partly estimated. Actual values can be may differ. === English === Technical data are partially estimated. Actual values may vary
used
Heating bed length 3m Wood types FI, AI, LÄ, DG, ZI L-lamella width 60 - 140 mm ML- Slat thickness 8 - 15 mm Rod width 25-45 Rod thickness 17-31 mm Possible. Carpet widths 1273 - 2073 mm Special widths 1000, 1700 mm Target power/shift: 1500 average. Up to 2000 m2 / SCHICHT 1273 - 2073 mm 1500 average. Up to 2000 m2 / S
used
Continuous press Wemhöner Year of construction: 1978 Upper piston press – lower press table is always standing at a constant height Pressing area approx. 4300 mm x 1350 mm 8 pressing cylinders from above was used as a cold press Water pipes available for connection to hot water still electrically connected, in operational condition with 1 roll replacement continuous film 1400 mm wide
used
SERGIANI 2 - Floor Continuous Press Model Leopida/Leomatic Slide-in table 6,000 mm x 1,400 mm Press 5,000 mm x 1,400 mm Discharge roller conveyor 4,000 mm x 1,400 mm
used
HF Press Manufacturer Ormamacchine High-frequency continuous belt press Manual glue application incl. Laying table / filling bed 5000 x 1400 mm Press 4600 x 1400 mm Roller conveyor outlet 5000 mm Workpiece thickness max 200 mm Side printing cylinder 10 Pressing force 110 t RF Generator 40 Kw Dimension: 16000 x 3200 mm
used
Seehr well-preserved solid wood panels - gluing system TYPE PROFIPRESS P 3500-2 for max. wood length 3.5m Loading from the right in u-shape Year of construction 2003 General overhaul 2018 since then only test run Machine dismantled, on request with assembly against payment Seehr good condition immediately available
used
Used zinc rod making machine for sale. Model No.: FAH Year of construction: 2010 Price: 90,000.00
Price per 2700 mm; continuous shelf BITO 5 levels per shelving system Continuous shelf BITO Manufacturer BITO Regaltechnik All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is ...
Qty. 1 Second-hand Twin-Roll Aluminium Continuous Strip Caster Line General information: ALLOYS: 1xxx, 8011 and 3003 on this caster with good results at the cold rolling mill stage. INSPECTION: The line can be inspected under power. TRIAL CAST: They cannot cast a trial coil. Some movement of the equipment can be seen. ISSUES: The launder lining will need to be replaced (which has to be done when it is moved anyway). The bottom caster roll shell is damaged and needs to be replaced. The good news is that the roll core (the expensive part) is in excellent condition. Mfc.: CASTAL Ltd. Strip width: 1350 mm – 53.15” Strip thickness: max. 12.0 mm – 0.472” min. 4.2 mm – 0.165” achieved! Casting speed: 1050 alloy – 1.5 MT / h achieved 3003 alloy – 900 kg/h achieved Caster configuration: Horizontal – 15 degree tilt