We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Special production plant of the brand Friulmac for the production of (standard) garden houses, wooden houses, log houses etc. System Block construction and block plank construction tools, milling and suction device. As good as new!
used
TECHNICAL DATA: Complete production line for Blockhaus processing consisting of 02 machines: Hundegger joinery machine model K3 and special Friulmac system model Idramat SQ The combination of the two machines allows the realization in a continuous cycle of: Bungalows Garden sheds Temporary houses Small houses Tourist accommodations Emergency accommodation
used
I sell a double end cutting and milling machine FRIULMAC IDRAMAT, built in 2007. Working width up to 2500mm Configuration left side / fix: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 + 1 pcs. groove saw units front + rear with jump Configuration right side / movable: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 pcs. special milling unit on top / 5.5 KW Material pressure band with support from above. Special design, also suitable for side dimensioning. Continuous machine. Siemens Simantic control panel. Condition Very good. Available the same.
used
SECOND-HAND THROUGHFEED LOADER FRIULMAC MOD. FN3 - min/max working length 250/1300 mm - max working width 160 mm - min/max working thickness 10/80 mm - production capacity : 0-50 psc / min - diam. Blades 400 mm - sn 1656
used
SECOND-HAND THROUGHFEED LOADER FRIULMAC MOD. FN3 - CE RULES - 3 rollers - min/max working length 250/1300 mm - max working width 160 mm - min/max working thickness 10/80 mm - production capacity : 0-50 psc / min - diam. Blades 400 mm - year 1996
used
offer 22317 Specifications: - Saw blade dimensions up to 315 x 2 x 40 mm - Saw blade spindle speeds 43 + 86 rpm - Cutting range at 90° around 100 mm - square 80 mm - flat 105 x 70 mm - Cutting range at 45° left around 80 mm - square 70 mm - flat 75 x 70 mm opening width of the material clamping stick 175 mm - Material stop 1000 mm - Drive 400 V / 2.5 / 3.0 kW - Space requirement approx. W 600 x H 1400 x D 1000 mm - Weight approx. 180 kg - 7 saw blades
used
Technical data: SEGA BIANCO MOD. 350 UNDOCUMENTED
used
Offer 23397 Specifications: - Saw blade diameter up to 350 mm - 2 saw blade spindle speeds 22 + 44 rpm - Mitre adjustable left + right up to 45 ° - Cutting range at 90° - round tube 115 mm - Square tube 105 x 105 mm - Solid material (saw blade 350mm) 60 mm - Flat profile 140 x 80 mm - Cutting range at 45° - round tube 115 mm - Square tube 90 x 90 mm - Pneumatic material clamping vices - Coolant device - Dimensional fence 1500 mm - Pneumatic connection 6 bar - Drive 400 V / 1.4 / 2.2 kW - Space requirement approx. W 600 x H 1400 x D 900 mm - Weight approx. 300 kg
used
Specifications: Speed: 2800 1/min Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm
used
Specifications: - Saw blade dimensions 275 x 2 x 40 mm - 2 saw blade spindle speeds 44 + 88 rpm - Cutting range at 90° around 90 mm - flat 110 x 60 mm - Mitre adjustable up to 45 ° - Material vice - Drive 400 V / 1.5 / 1.8 kW - Coolant device - Space requirement approx. W 600 x H 1400 x D 900 mm - Weight approx. 200 kg
used
Automatic cut off saw for cutting pre-programmed fixed lengths and fault trip caps after chalk marking. Not much worked top condition.
new
Mobile package crosscut saw Holtec Caps star o package cross-section up to 1.25 m x 1.25 m o Round wood diameter up to 1.60 m o Electric motor 11 KW o Pointed tooth chain o Double-sided stellitierte rail (Quad reversible) o Bar length: 1.90 m
used
Mobile package crosscut saw Holtec Caps star o package cross-section up to 1.25 m x 1.25 m o Round wood diameter up to 1.60 m o Electric motor 11 KW o Pointed tooth chain o Double-sided stellitierte rail (Quad reversible) o Bar length: 1.90 m
used
Mobile package crosscut saw Holtec Caps star o package cross-section up to 1.25 m x 1.25 m o Round wood diameter up to 1.60 m o Electric motor 11 KW o Pointed tooth chain o Double-sided stellitierte rail (Quad reversible) o Bar length: 1.90 m
used
Dimensions basic machine approx. 3000x2000x2300mm.; Length of feed roller conveyor approximately 5200mm.
used
Ø shaft hole 30mm, with tilt adjustment
used
incl. table extension
used
Location: large warehouse
used
Suitable for rigid foam, sawing width: 1250mm, max. sawing height: 200mm, max. speed: 12m/min, with controls cabinet or saw blade.
new
miter square horizontal: +60° / 0° / -45°; miter square vertical: 0° / +45°; cutting hight at 0°: 200 mm; cutting height at 15 °: 190 mm; cutting height at 45°: 115 mm; cutting performance at 0°: 525 mm; cutting performance at 60°: 270 mm; cutting performance at 45°: 370 mm; saw blade diameter: 550 mm; diameter spindle: 30 mm; speed: 2800 U/min; motor power: 4 kW; motor brake: yes, automatically; suction connection: 150 mm; weight: 315 kg; • Aluminium arm • Precision linear guides made of hardened steel • Rotation and tilt from the front of the machine • Emergency stop
-350 mm x 2000 mm max wood cross-section -Circular saw blade D900 mm -Special saw was only about 5 hours in use after the overhaul >> Made in West Germany 100%
used
Crosscut saw, pull saw, chop saw, plunge saw -Cut saw: automatic saw, used for slats/blinds production -Saw blade: Ø 188 mm -Individual components: see photos -Dimensions: 1390/620/H1130 mm -Weight: 576 kg
used
Crosscut and miter saw, pull saw, crosscut saw, panel saw, crosscut and miter saw, radial saw, radial arm saw -Manufacturer: Elu, cross-cut and miter saw with table on solid base, mobile -Type: MGS 72 -Motor power: 0.85/1.2 kW -Speed: 1050/2100 rpm -Saw blade: Ø 305 mm -Cutting height: max.110 mm -Cutting width: max. 120 mm -Miter. 45° on both sides -Dimensions: 2100/840/H1180 mm -Total weight: 190 kg
used
Crosscut and miter saw, pull saw, chop saw, panel saw, chop and miter saw, radial saw, radial arm saw -Manufacturer: DeWalt, radial arm saw with table on solid base, mobile -Type: mod. 1600 -Motor power: 2.23 kW -Speed: 3000 rpm -Saw blade: Ø 315 mm -Max. Cutting height: 100 mm -Cutting width: 660 mm -Saw blade: pivotable, tiltable, see photos -Dimensions: 1990/1110/H1420 mm -Weight: 191 kg
used
Crosscut and miter saw, pull saw, miter saw, panel saw, miter saw, radial saw, radial arm saw -on: stable base -Motor power: 1.49 kW -Speed: 3000 rpm -Saw blade: Ø 250 mm -Max. Cutting height: 80 mm -Cutting length: 500 mm -Saw blade is: tiltable up to 90° -Dimensions: 840/700/H1390 mm -Weight: 150 kg