used FREJOTH Vertical Bandsaws

Cutting speed:-3 gearbox stages + Variogetriebe 15-940 m / min -Overdrive 2350 m / min Plate B x T CA 700 x 600 mm RADIUS approx. 480 mm Cutting height Max approx. 360 mm Space requirements, B x T x H approx. 1.1 x 0.8 m estimated approx. weight 1 to Equipment:-rubber of the two rollers is in good condition -IDEAL band sealer - table Tiltable

Used Vertical band saw, make MÖSSNER, good, electrically connected Model SM 420 Masch.-No. 20313 Built in 1972 Technical data: 8 cutting speeds: 12 - 375 m/min Support table B x T approx. 600 x 600 mm Discharge approx. 410 mm Cutting height max. approx. 260 mm Space requirement , W x T x H approx. 1 x 0.8 x 1.95 m (height incl. 9 cm eye screw) Weight estimated approx. 0.6 to Facilities: both rollers are "newly rubberized" / re-occupied IDEAL Tape Welding Machine Table tilted

Used Vertical band saw, make MÖSSNER, good, electrically connected Model SSF/500 Masch.-No. 11502 Built in 1963 Technical data: Cut: - 3 gear stages + Vario gearbox 15 - 940 m/min - Fast response 2350 m/min Support table B x T approx. 700 x 600 mm Discharge approx. 480 mm Cutting height max. approx. 360 mm Space requirement , W x T x H approx. 1.1 x 0.8 m Weight estimated approx. 1 to Facilities: Rubbering of both rollers is in good condition IDEAL Tape Welding Machine Table tilted

Description Universal Vertical band saw of the brand Mössner suitable for tooling, fixture construction, training as well as mold making Extension: 280mm Cutting speed: 24 - 558 m/min Description : The machine comes from a tool factory and has been regularly serviced and has few operating hours. Technical data Year built / YOM 1973 Cutting speed / Cutting speed 24 - 558 m/min Extension / swing 280mm Feeds no Table / Table 500x400mm Machine Weight /Weight ca 350kg Wheel Diameter / Wheel Slide 300mm Dimensions / Dimension 850 x 500 x 1,450 mm

Cutting width: 1010 mm Cutting height: 340 mm Working height: 1000 mm Table size: 600 x 500 mm Stepless cutting speed: 1st gear: 20-85 m/min 2nd gear: 120 - 500 m/min Band saw blade length: 4540 mm Band saw width: 3 - 16 mm Tilting and tiltable table in 4 directions: 15° Motor power: 1.5 kW Weight, approx.: 800 kg Equipment: - Band saw blade - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light - LED speed indicator - Blow-out device -CE

Cutting width: 355 mm Cutting height: 230 mm Working height: 960 mm Table size: 500 x 400 mm Stepless cutting speed: 20 - 90 m/min Band saw blade length: 2840 mm Band saw width: 3 - 16 mm Tilting and tiltable table in 4 directions: 15° Motor power: 0.75 kW Weight, approx.: 250 kg Scope of delivery: - Band saw blade - Stepless cutting speed - Belt welding device with annealing unit - Machine light -Scissors - Grinding station - Chip brush - Blow-out device - LED digital display (to indicate the cutting speed) - Table with stop groove - Parallel fence -CE

Cutting width: 520 mm Cutting height: 310 mm Working height: 1000 mm Cutting speed level 1: 25 - 85 m/min Cutting speed level 2: 120 - 500 m/min Cord edge: 3880 mm Saw band width: 3 - 16 mm Table size: 600 x 500 mm Table swivel range (in 4 directions): 15° Motor power: 1.5 kW Blade welding device: 2.4 kVA Machine dimensions (L x D x H): 1300 x 760 x 2140 mm Weight approx.: 500 kg Equipment: - Band saw blade - Stepless cutting speed - Reduction gearbox - Belt welding device with annealing unit - Machine light -Scissors - Grinding station - Chip brush - Blow-out device - LED digital display (to indicate the cutting speed) - Table with stop groove - Angle stop - Parallel fence

Specifications: Cutting width 500 mm Table size 800 x 820 mm Travel approx. 350 mm Cutting height under guide approx. 400 mm Belt length 4000 mm Infinitely variable speeds approx. Gearbox stage 1 15 – 80 m/min Gearbox Stage 2 75 - 305 m/min Gearbox Stage 3 207 - 944 m/min

Specifications: Cutting width 1050 mm Table size 800 x 820 mm Automatic travel approx. 340 mm Cutting height under guide 400 mm Cutting height under the handwheel approx. 290 mm Belt length 5250 - 5380 mm Infinitely variable speeds - Gearbox stage 1 17 - 79 m/min - Gearbox stage 2 67 - 305 m/min - Gearbox level 3 207 - 940 m/min

Data: Saw blade 4500 x 13 mm Cutting height max. 200 mm Blank diameter from 200 - 1500 mm Cutting speed approx. 1Technical50 - 1500 m/min , infinitely variable Hydraulic material clamping Hydraulic swivel device Drive power saw motor 4.0 kW Rotary actuator hydraulic 1.5 kW

Offer 24045 Technical data approx.: - Roll diameter 420 mm - Projection 405 mm - Max. passage height 280 mm - Table size 600 x 600 mm - Swivel table 15 / 45 ° - Table height from the floor 1050 mm - Saw blade length approx. 3400 mm - Saw band width approx. 3 - 20 mm - Cutting speeds infinitely variable 25 - 300 m/min - Drive 400 V / 1.9 kW - Weight approx. 480 kg - Space requirement approx. W 750 x H 2050 x D 1150 mm

Saw blade diameter: 350 mm cutting capacity at 90 ° round: 90 mm cutting capacity at 90 ° square: 160 x 70 mm section in MITRE at 45 ° rectangle: 120 x 60 / 60 x 80 mm cutting speed: 30 m / min drive motor: 1.1 kW space: 1000 x 1250 x 1380 mm weight: 795 kg

Cutting capacity round 90°: 170 mm cutting capacity flat 90°: 140 x 210 mm cutting capacity around 45°: 125 mm section flat 45°: 100 x 125 mm working height: 890 mm band saw blade dimensions: 2080 x 20 x 0,9 mm cutting speed: 20-90 m / min coolant pump S1 100%: 100 W power: 0.75 of kW machine dimensions (L x D x H): 1250 x 540 x 1600 mm weight approx.: 157 kg

Saw blade diameter: 370 mm cutting capacity at 90°: 115 mm cutting capacity at 45°: 115 mm drive motor: 380 V, 4.5 kW space: 1000 x 1200/2200 x 1500 mm weight: approx. 900 kg

Cutting capacity round 90°: 150 mm Section flat 90°: 145 x 150 mm Cutting capacity round 45°: 100 mm Section flat 45°: 90 x 150 mm Cutting capacity round 60°: 70 mm Working height: 890 mm Band saw blade dimensions: 1735 x 13 x 0.9 mm Cutting speed, continuous: 20-65 m / min Coolant pump: 100 W Engine power: 0,37 kW Voltage: 230 V Machine dimensions (L x D x H): 1000 x 510 x 1520 mm Approximate weight: 100 kg Features: -Adjustable cutting speed for optimal results -Standard with quick clamping vise and fence -Gearbox with hardened and ground Auger and bronze worm wheel -Fitted with base and coolant system -Ball bearing 3-point blade Guide no seeping effect of blade -For mitre cuts the saw handle is swung (up to 60 °), this space-saving work for long workpieces possible -Twist-free, heavily dimensioned saw bracket Scope of ...

Cutting capacity round / square 90°: 255 mm / 210 x 210 mm 90° flat cutting area: 310 x 210 mm Cutting capacity round / square 45 ° R: 220 mm / 210 x 210 mm Section flat 45 ° r: 220 x 200 mm Cutting capacity round / square 45 ° L: 230 mm / 200 x 200 mm Cutting capacity 45 ° L: flat 230 x 200 mm Cutting capacity round / square 60 ° R: 135 mm / 135 x 135 mm Section flat 60 ° R: 135 x 135 mm Working height: 930 mm Band saw blade dimensions: 2750 x 27 x 0,9 mm Cutting speed: 35 / 70 m / min Coolant pump: 100 W S1 motor power output 100%: 1.5 kW Motor power S6 40%: 2.2 kW Voltage: 400 V Machine dimensions (L x D x H): 2000 x 1250 x 1900 mm Approximate weight: 350 kg Features: -Professional band saw for General workshop use, fitters... -For cutting of hollow profiles and full materials, ...

Max cutting length: 4000 mm Cutting height: 200 mm Cutting width: 130 mm Power: 5,1 kW Weight: 650 kg

No. 4428: 1 gebr. Horizontal band saw Fabr. SAMUR, type S-1000 V, Bauj. 1966 Arb.-Ber.: 800 mm throughlet width, Accessories: Table Dimensions: 610 x 610 mm Table extension on the left with welding device Other: Cutting height 350 mm Cutting speed 20-800 mm Sheet length: 4,550 mm. Blade width: 4 to 15 mm. Speed infinitely variable Cutting speed: 23-711 m / min Electric motor 380 V

Technical data: - Cutting range at 90° around 260 mm - flat 450 x 240 mm - Cutting range at 45° around 230 mm - flat 240 x 200 mm - Machine is mounted on original turnstile - Saw band dimension 3660 x 25 x 0.9 mm - Cutting speeds 20 / 35 / 50 / 70 m/min - Hydr. lifting + lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 0.8 kW - Coolant device - Space requirement approx. W 2100 x H 1200 x D 1000 mm - Weight approx. 500 kg

specifications: - Saw blade diameter up to approx. 450 mm - Cutting range at 90° approx. - 60 x 250 mm - 140 x 120 mm - 100 x 200 mm - in miter at 45° approx. - 60 x 190 mm - 140 x 80 mm - 100 x 160 mm - in miter at 15° approx. - 100 x 60 mm - Miter adjustment left + right - Pneum. Saw blade feed - Saw blade speed 2800 rpm - Drive 400 V / 2.2 kW - Compressed air connection 6 bar - Space requirement approx. W 900 x H 1200 x D 900 mm - Weight approx. 280 kg

Cutting range round 0°: 127 mm Cutting area flat 0°: 125 x 130 mm Cutting range round 45° right: 90 mm Cutting area square 45° right: 90 x 90 mm Cutting range approx. 60° right: 45 mm Cutting area square 60° right: 45 x 45 mm Vice opening: 130 mm Band saw blade dimensions: 1440 x 13 x 0.65 mm Cutting speeds: 30 - 80 m/min Motor power: 0.55 kW Voltage: 230 V Weight approx.: 25 kg Characteristics: - Two cutting speed levels for optimal adaptation to the workpiece - For miter cuts, the saw bracket can be swivelled up to 60° - Including workpiece stop for rational work - Optimum cutting results thanks to band saw blade guide with ball bearings - High-torque engine, even under continuous load - Under load, the motor electronics keep the cutting speed largely constant - Environmentally friendly, as there is no need for lubricating and coolant fluids - Smooth, low ...

Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting range round 45°: 115 mm Cutting area flat 45°: 115 x 130 mm Cutting range round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height: 700 mm Band saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds: 40 - 80 m/min Motor output power S1 100%: 0.75 kW Voltage: 400 V Machine dimensions: 1200 x 750 x 1250 mm Weight approx.: 85 kg Characteristics: • For cutting profiles, tubes, solid materials made of VA, iron and non-ferrous materials • For miter cuts, the saw bracket can be swivelled by up to 60° • Infinitely variable lowering via hydraulic lowering cylinder • Torsion-free, strongly dimensioned saw arm made of grey cast iron • 2 cutting speeds for optimal cutting results • Robust construction, therefore smooth and vibration-fre ...

Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting range round 45°: 115 mm Cutting area flat 45°: 115 x 130 mm Cutting range round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height approx.: 700 mm Band saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds : 40 / 80 m/min Motor output power S1 100%: 0.75 kW Voltage : 400 V Machine dimensions : 1200 x 750 x 1250 mm Weight approx.: 85 kg Characteristics: • For cutting profiles, tubes, solid materials made of VA, iron and non-ferrous materials • For miter cuts, the saw bracket can be swivelled by up to 60° • Infinitely variable lowering via hydraulic lowering cylinder • Torsion-free, strongly dimensioned saw arm made of grey cast iron • 2 cutting speeds for optimal cutting results • Robust construction, therefore smooth and vi ...

I sell a continuous double mitre saw with scoring OMGA TI2500 Super, year of construction 2003. Motor 5kW on each side for both main saw and scorer. Working width max. 1200mm Cutting depth (slot length) 2500mm Underpressure for this and light elements 1 pc. on each side. Self pump. Material pressures top 1 pc. on each side. Available same. Fully operational. All errors fixed.

Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm 2 saw blade speeds: 40 / 80 rpm. Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug. free domicile within Germany