We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Table length: 9000 mm Table width: 3000 mm Longitudinal X: 8000 mm Cross Y: 2500 mm Vertical Z: 1500 mm Positions ATC: 100 CNC Brand: Heidenhain CNC Model: HeidenHain iTNC530 ATC Chain 100 positions TUPCG5 Milling head 360.000 x 0.001 Gr Torq 1180 Nm Head changer with 3 positions Double HeidenHain iTNC 530 Index table 1200 mm X-Axis: 8000mm Y-Axis: 2500mm Z-Axis: 1500mm Table Length: 9000mm Table Width: 3000mm Power on spindle: 46kW Spindle speeds: 5000Rpm Spindle Taper: 50 + HSK 63ISO/Bt/Mk Feed rate X-Axis: 35000mm/min. Feed rate Y-Axis:&n ...
used
Table length: 3500 mm Table width: 900 mm Longitudinal X: 3000 mm Cross Y: 1000 mm Vertical Z: 1500 mm Positions ATC: 0 CNC Brand: Heidenhain X-Axis: 3000mm Y-Axis: 1000mm Z-Axis: 1500mm Table Length: 3500mm Table Width: 900mm Table load: 5500 Power on spindle:24kW Spindle speeds: 2000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis:10000mm/min. Feed rate Y-Axis:10000mm/min. Feed rate Z-Axis:10000mm/min. Length: 6500mm Width: 3500mm Height: 3500mm Weight: 18000kg
used
Key data: 2000 , 1000 , 1200
Used bed milling machine, Fab.Fpt, type LEM 934, built in 1996, Table 2500 x920 mm, longitudinal stroke 2000 mm, transverse stroke 1000 mm, vertical stroke 1200 mm, Control Heidenhain TNC 426. Machine has a defect in the Y-axis.
used
This FPT RONIN milling machine was built in the year 2012 in Italy. The machine has a longitudinal stroke (X) of 6000 mm, a vertical stroke (Z) of 2000 mm and a cross stroke (Y) of 1250 mm.
used
Technical data of the FPT Pragma M40 mobile column milling machine used: Longitudinal travel: 4000 mm Vertical travel: 1600 mm Transversal travel: 1200 mm Working feeds: 0-15000 mm/min Fast feed: 30000 mm/min Maximum thrust on axes (X,Y,Z): 2000 from N Spindle motor power (continuous service S1): 28 kW 38 hp Spindle motor power (intermittent service S6-60%): 35 kW 47,6 hp Constant torque spindle speed range: 0-312.5 g/min Spindle speed range at constant power. 312.5-5000 rpm Maximum spindle torque (continuous service S1): 856 Nm Maximum spindle torque (intermittent service S6-60%): 1070 Nm Supply voltage: 50Hz Current consumption: 119,2A Total installed power: 65 kW 88,4hp
used
CNC Boring and milling machine FPT SPAZIO 20 - 2000x800x1250 mm, CNC SELCA 3045PD, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 2200X750 mm, Longitudinal travel x axis: 2000 mm, Cross travel y axis: 800 mm, Vertical travel z axis: 1250 mm, Working feed x-y-z axes: 0 - 15.000 mm/1, Rapid feed x-y-z axes: 15.000 mm/1, Spindle taper: 50 DIN 69871, Spindle speed: 0 - 4000 giri/1, Spindle motor power: 21 Kw(S1) - 25 Kw(S6), Cnc: SELCA 3045PD, Accessories: Automatic index head 2,5°, chip conveyor
used
Key data: 3500 mm, 1100 mm, 1500 mm
FPT Industrie TESSEN EVO - Travelling column milling machine - Heidenhain TNC640 CNC control - portable electronic handwheel HR520 - Manual docking of the frog head to the machine - Universal head with 0.001° pitch - Static RTCP in the room - Tapping without compensating chuck for mechanical milling heads - Collision monitoring sensor - 2 tool magazines of 40 positions each ISO 50 - 2 posts for loading and unloading tools in the magazine - Wireless touch probe - Internal and external coolant supply (LEIU-LEU) - Internal compressed air supply - Pendulum machining with a partition wall - Full enclosure with roof - Workspace lighting - Bed flushing - Chip conveyor with ejection on the right side - Programmable adaptive control - Teleservice (remote diagnosis) - GREEN MODE function to optimize the energy consumption of the machine - FPT Standard Paint -Magnetic - NC ...
used
Ref. -No.: 10347 Manufacturer: FPT Year of construction: 2006 Type of control: CNC Control: Heidenhain 530 Country of origin: Italien X-Travel: 12000 mm Y-Travel: 3500 mm Z-Travel: 1500 mm Tool Piece Magazine With: 80 Pcs./pcs. Spindle Speed: 3000 RPM Drive Capacity - Spindle Motor: 37 kW Round table 1 (lxw): 2500x2500 mm Round Table 1 - V: 2000 mm Rotary table 1 max. load: 30000 kg Round table 2 (lxw): 2500x2500 mm Round Table 2 - V: 1500 mm Rotary table 2 max. load: 30000 kg Further information:
used
Ref. -No.: 10350 Manufacturer: FPT Year of construction: 2012 Type of control: CNC Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Italien X-Travel: 14000 mm Y-Travel: 5000 mm Z-Travel: 1500 mm W-Axis: 1000 mm Numbers Of Tools In Magazin: 24 Drive Capacity - Spindle Motor: 60 kW Rotary table diameter: 3000x3000 mm Rotary table travel V: 2500 mm Rotary table max. Load: 80000 kg swivel angle: 180 ° Further information: +3D M Sensor +CNC controlled angle head: micro
used
Year of construction 2001 Hours of power up 16,400 hours Spindle rotation hours h 3,078 X axis - Longitudinal travel 7,000 mm Z axis - Vertical travel 2,500 mm Y axis - Transverse travel mm 1,250 (1050) Work progress speed mm/min 0 ÷ 4,000 Rapid feed speed mm/min 12,000 Maximum thrust on the X-Y-Z axes daN 2,200 Spindle motor power in S1 kW 30 Spindle motor power in S6 kW 37.5 Spindle speed at constant torque. rpm 0 ÷ 235 Spindle speed at constant power. rpm 235 ÷ 4,000 Maximum spindle torque in S6 Nm 1,500 Supply voltage Vac 400 Power frequency Hz 50 Total installed power kW 75.1 Spindle taper NOT INSTALLED Automatic head change Yes ISO 50 tool magazine no. pos. 60 Automatic tool changer installed HEIDENHAIN TNC430M CNC Positioning accuracy mm ±0.020 Repeatability accuracy mm ±0.010 Supplied accessories: - X axis bench with X axis telescopic cover - Up ...
used
Year of construction 2000 Hours of power up h 10205 X axis - Longitudinal travel 10,500 mm Z axis - Vertical travel 2,500 mm Y axis - Transversal travel 1,250 mm Work progress speed mm/min 0 ÷ 4,000 Rapid feed speed mm/min 12,000 Maximum thrust on the X-Y-Z axes daN 2,200 Spindle motor power in S1 kW 30 Spindle motor power in S6 kW 37.5 Spindle speed at constant torque. rpm 0 ÷ 235 Spindle speed at constant power. rpm 235 ÷ 4,000 Maximum spindle torque in S6 Nm 1,500 Supply voltage Vac 400 Power frequency Hz 50 Total installed power kW 75.1 ISO spindle taper ISO 50 Positioning accuracy mm ±0.020 Repeatability accuracy mm ±0.010 Supplied accessories: - X axis bench with X axis telescopic cover - Upright complete with ram - Z axis telescopic cover - Articulated presetting probe support - Pneumostatic support system - Carter - Hydraulic unit - Filtering tan ...
used
spindle diameter:160 mm x-travel:6000 mm y-travel:5000 mm z-axis:1500 mm dimension of the ram:470 x 500 mm w-axis:900 mm spindle taper ISO:50 spindle turning speed range:1 -3000 U/min spindle motor:71 kW feed speeds:1 - 5000 mm/min rapid speed:25 m/min total power requirement:187,6 kW dimensions of the machine ca.:14,1 x 13,4 x ü.F.7,8 m Machine in mint condition ! with CNC control HEIDENHAIN iTNC 530 autom. toolchanger 80 - pockets CNC Rotary Table 4000 x 4000 mm max. table load 75 to. longitudinal movement V-axis 1500 mm autom. head changer with universal Milling Head universal high speed milling head 5-axis 18000 rpm RENISHAW measuring probe belt filtering unit and through spindle coolant chip conveyor
used
x-travel: 14.000 mm y-travel: 1.500 mm z-travel: 3.000 mm Control: Heidenhain Itnc 530 total power requirement: 50 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1110049 Type of machine CNC floortype milling machine Make FPT Type Spirit 130 Build in 2012 Type of control HEIDENHAIN TNC Itnc 530 X-stroke (mm) 14.000 Y-stroke (mm) 1.500 Z-stroke (mm) 3.000 Speeds (Rpm) max. 4.000 Admission in spindlehead Iso 50 Rapid feeds max 25.000 mm/min Additional information Program run 9655 hour The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
CNC travelling column drilling-milling machine manufacturer FPT model Pragma M40 with control Fidia C20 with plate field 5000 x 2000 mm. Travel xyz 4000x2000x1200 mm. 2 pieces of universal heads BT50 / HSK63 both automatically swivel 2.5°. Machine immediately available and available. Dismantling and loading onto suitable trucks is cost-effective. Installation and commissioning on request.
used
- - - - - travels - - - - -: - - - - - - travel -x axis: 10.000 mm travel -y axis: 1.500 mm travel -z axis: 4.000 mm - - - spindle - - -: - - - - - - output: 62.5 kW turning speed range: 262 - 4.000 U/min Torque: 2.280 Nm - - - table - - -: - - - - - - Size of table plate: 2x (2.500 x 3.000) mm longitudinal travel: 2.000 mm max. load: 30.000 kg solution: 0,0005 ° solution: 1,8 sek. table turning speeds: 1,5 U/min - - - further technical details - - -: - - - control: Siemens 840 Dsl numbers of positions in the tool changer: 80 tool taper: ISO 50 max. feed: 25.000 mm/min - - - T-slots - - -: - - - - - - size of T-slots (DIN 650): 28 mm T-slot - distance: 225 mm Milling machine | SPIRIT 140 - 2014 equipped with two HYDROSTATIC rotary boring tables (TRT30). The machine has only approx. 9.900 H working hours. Equipment: - Hydrostatic guideways - Cooling system - Handwheel with radio transmi ...
used
Siemens 840D SL steering unit Year of construction 2008 Pallet dimensions 1200 x 1000 mm HEIDENHAIN iTNC 530 steering unit Maximum load allowed on the table 5000 kg Axis travel x mm 1750 Y-axis travel 1400 mm Z axis travel 600 mm Rapid feeds X -Y -Z m/min 35 HSK A63 spindle connection Spindle revolutions rpm 18,000 Spindle Motor Kw 18.5-25 Tool warehouse n. 30 random
used
Pallet dimensions 1200 x 1000 mm HEIDENHAIN iTNC 530 steering unit Maximum load allowed on the table 5000 kg Axis travel x mm 1750 Y-axis travel 1400 mm Z axis travel 600 mm Rapid feeds X -Y -Z m/min 35 HSK A63 spindle connection Spindle revolutions rpm 18,000 Spindle Motor Kw 18.5-25 Tool warehouse n 30 random
used
Complete system with all accessories required for installation and operation, see below! Travels x = 7000 y = 1600 z = 800 / quill stroke w = 600mm *** General overhaul in 2007, year of production 1991: New control system Siemens Sinumerik 840D, new drive motors, guideways refurbished, new control cabinets. ECOCUT 1 was only operated for a few months thereafter *** Feed rate 12000 mm / min // w axis 6000 mm / min Xua2eg8fx Rotary table TDV 2 max. Workpiece weight 6t / clamping surface 1000x1000 Rotary table TDV 3 max. Workpiece weight 12t / clamping surface 1250x1600 Accessories: 2 like new angular crankset / chain tool change system / plate field / complete housing / Knoll funnel feeder / extraction / coolant system with belt filter All BWF fixators for installation of machine bed and panel
used
Table size: 500 x 1200 mm traverse path x: 1000 mm stroke y: 550 mm traverse path z: 600 mm spindle retainer: ISO 40 spindle speeds: 60-2700 rpm spindle drive: 10 kW Electr. Supply: 380 V, 20 kVA kW space: 3200 x 2800 x 2650 mm weight: 7.3 t
Key data: 1600 Heidenhain, 1000 TNC 426, 1400
Table length: 1600 mm Table width: 1000 mm Longitudinal X: 1400 mm Cross Y: 1000 mm Vertical Z: 1000 mm Positions ATC: 0 CNC Brand: Heidenhain CNC Model: TNC 426 Make: CME Type: FS-1 Control: HeidenHain TNC 426 YOP: 2002 X-Axis: 1.400mm Y-Axis: 1.000mm Z-Axis: 1.000mm Table Length: 1.600mm Table Width: 850mm Table load: 2.500Kg Power on spindle:22kW Spindle speeds: 4000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis:20.000mm/min. Feed rate Y-Axis:20.000mm/min. Feed rate Z-Axis:20.000mm/min. Length: 4.260 mm Width: 2.500 mm Height: 2.600 mm Weight: 9.900 kg Swi ...
used
Table length: 1600 mm Table width: 550 mm Longitudinal X: 1100 mm Cross Y: 700 mm Vertical Z: 500 mm Positions ATC: 0 CNC Brand: Heidenhain CNC Model: TNC 310 CME - FC 1100 Universal milling machine 1100 x 700 x 500 mm MACH - ID 6332 Make: CME Type: FC 1100 Control: Heidenhain TNC 310 YOP: 1998 X-Axis 1.100 mm Y-Axis 700 mm Z-Axis 500 mm Table Length 1.600 mm Table Width 550 mm Table load 300 kg Power on spindle 7.5 kW Spindle speeds 1800 Rpm Spindle Taper 40 ISO/Bt/Mk Dimensions Length 3.800 mm Width 2.800 mm Height&nb ...
used
Table length: 6000 mm Table width: 1000 mm Longitudinal X: 4300 mm Cross Y: 1200 mm Vertical Z: 1500 mm Positions ATC: 0 CNC Brand: Heidenhain CNC Model: TNC 426 MACH - ID 6109 Make: Nicolas Correa Type :L30-43 Control :HeidenHain TNC 426 YOP :1997 X-Axis 4.300 mm Y-Axis 1.200 mm Z-Axis 1.500 mm Table Length 6.000 mm Table Width 1.000 mm Table load 10,000 kg Power on spindle 25 kW Spindle speeds 3000 Rpm Spindle Taper 50 ISO/Bt/Mk Feed rate X-Axis 15,000 mm Feed rate Y-Axis 15,000 mm Feed rate Z ...
used
Bed milling machine make NIIGATA type 2 UMBFabr. -No: 26064S5316 Year 1973Table clamping surface: 300 x 1370 mmTable movement lengthwise = X: 870 mmTable movement across = Y: 280 mmVertical movement of the milling head = Z: 380 mmmin/max. Distance between table and clamping surface: 50/430 mmDischarge of the milling head: 330 mmSpindle mount: ISA 50Milling head can be swiveled horizontally to vertically12 spindle speeds: 40-1750 rpm9 feeds longitudinal and transversal: 20-800 mm / minvertical: 9-355 mm / minRapid traverse longitudinal and transverse: 3 m / minvertical: 1375 mm / minSpindle drive 380 V: 3.7 kWFeed drive 380 V: 1.5 kWSpace requirement: 2780 x 1750 x 1800 mmWeight: 2400 kgWith- 3-axis digital display- Cooling deviceused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not ...
used
CNC bed milling machine make HURON type FXMachine -No: 890187 built in 1989Technical specifications:Working area X: 900 mmWorking area Y: 520 mmWorking area Z: 600 mmSpindle mount: ISA 40stepless speed range: 30 - 3150 mmTable size: 1000 x 700 mmmax.table load: 1300 kgTable height: 700 mmFeed rates X Y Z: 0 - 4000 mm / min.Feed force X Y Z: 5500 Nmax.feed force: 7700 NMotor power: 11 kWDimensions approx: 3000 x 2000 x 2500 mmWeight approx: 8000 kgWith- CNC control Heidenhain TNC 355- hydraulic tool clamping- hydraulic gear switchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
SHW UFZ 5 S with tool robot for 60 tools. X 4000, Y 1100, Z 1100, spindle 6000 rpm, round table Dm 1250, pitch 360000, also with horizontal dividing head with steady, pitch 3600000, internal cooling 16bar. Very few operating hours. Condition: excellent (used)