used FORTE Band Saws

Description Universal band saw of the Brand Forte suitable for tooling, fixture construction, training as well as mould making Cutting diameter: 400mm Sheet: 4870mm Technical data Cutting diameter 400mm Sheet 4870mm Speed 20-30-40-60 m/min Coolant Yes Connection 50 Hz 3x 380V Spindle motor 2.2KW

Circular automatic saw make FORTE type FKA 45Built in 1970Saw blade dimensions: 225 x 32 x 2 mmCutting performance in non-ferrous metal: 60 mmCutting performance in steel: 45 mmSection length automatically up to: 200 mmCutting speeds: 35 - 900 m / minFeed rate hydraulic: 300/600 mm / sDrive power: 4/5 kWDimensions L x W x H: 2700 x 700 x 1250 mmWeight approx: 1033 kgWith- Bar magazine for steel and non-ferrous metalsExclusively non-ferrous metal has been produced on the machine!used, from an operating resolution, despite the year of constructionin very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

heavy duty. Cutting capacity round/square 400 mm min. length 300 mm Max length a single / double feed 600/1200 mm

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Technical data Cut range: round up to: 250 mm Square: 250 mm Execution: Horizontal hydraulic Automatic Cut length: min.: 3 mm max: 2 X 400 mm Cutting speed: stepless from: 14 m/min up to: 116 m/min Roll diameter: 460 mm Band length: 4100 mm Voltage 50 Hz 3x: 380 Volt Power: 4.00 kW Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1700 mm Width: 1500 mm Height: 1350 mm Various accessories: Coolant system

Cutting area round: 250 mm Cutting area rectangular: 250 mm Saw band dimensions: 3660 x 25 x 0.9 mm Band speed: 20 - 70 m/min Saw drive: 1 kW Space requirement: 1900 x 1450 x 1250 mm Weight: approx. 850 kg

Cutting range round/ square: 400mm, cutting speed: 12-100m/min.

Length: 2200mm, width: 1200mm, height: 535mm, weight: 385kg.

Capacity round maximum diameter: 1780 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm SPECIFICATIONS Bandsaw / Circelblade / Automat  bandsaw   Angle L / R Degrees  90 gr Cutting capacity 90 ˚ Ø  1780 mm Cuttting capacity 90 ˚ Flatt   1780 x 1780 mm Max. cutting length 450 mm

- 2 saeulen-execution - Working area Durchm. u. Square 420 mm - Material feed length 3 - 600 mm single feed , - Cutting speed infinitely variable 12-100 m/min. - Heegeband dimensions 6050 X 40 X 1.3 mm - Drive 9.5 kW - Dimensions L/BH 2050 x 2725 x 2080/ 2530 mm - Weight: 4000 kg - Machine dimensions: L x W 1500 x1900 mm - Weight: approx. 1700 kg

Offer 23148 Specifications: - With hydraulic clamping and feeding device - Cutting area approx. 320 mm - Square 300 x 300 mm - Large section length for single stroke up to 400 mm - Multiple feed up to 10 x 400 mm - Band saw dimensions 3660 x 25 x 0.9 mm - Cutting speed infinitely variable 20 - 100 rpm - Feed speed hydraulically infinitely variable - Coolant device - Material support height 720 mm - Saw band - Drive 400 V / 2.5 kW - Space requirement approx. W 1950 x H 1250 x D 1500 mm - Weight approx. 1000 kg

Description: Machine incl. 3 pieces. Bandsaw blades Cutting diameter 420 mm Saw band length 4870 mm Cutting width 430 mm Table height 640 mm Profile size - max. 400 x 400 mm Cutting speed 20 - 60 m/min Saw blade length 4870 x 27 x 0.9 mm Total power requirement 1.82 kW Machine weight approx. 1.0 t Space requirement approx. 2.35 x 1.1 x 1.5 m Approx. Onsite Dimension. (l x w x h): 2,350 x 1,100 x 1,500 mm, weight approx.: 1,000 kg

Metal bandage gemaess picture

Band saw, with double feed

Forte cold circular sawing machine with roll feed. Outfeed table and bundle magazine doesn't exist.

saw blade diameter: 225 mm cutting diameter: max. 60 mm feed: max. 600 mm total power requirement: 5 kW weight of the machine ca.: 1,03 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

60″ x .135″ x 20,000Lb Cincinnati – Forte Loop Slitting Line Material Width: 12″ – 60″ , Thickness: .010″ – .135″, Weight: 20,000Lb, Coil ID: 16″ – 24″, Coil OD: 72″, Speed: 600 fpm, Direction: Left to Right. Entry Turnstile, Entry L-Type Coil Car, Mandrel Uncoiler with Hold-Down Roll, Powered Peeler, Driven Pinch Rolls, PVC Applicator, Entry Shear, Two Slitting Heads, Injection Design, 5″ & 7″ Arbor Diameter, 75HP DC Motor, Two (2) Hydraulic Scrap Winders, Pit Cross Over Table, Drag Board & Rotary Tension Stand, Recoiler with Over-Arm Separator & Push-Off, 150HP DC Motor, Exit L-Type Coil Car & Turnstile. Electrics, Hydraulics, Controls, Tooling, Spare Parts

cutting diameter: max. 250 mm feed:: . accessories:: Ersatzbänder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Iron cylinder. Induction-hardened rollers. Easy handling thanks to mobile control panel with pushbuttons. Conical bending device. Hot-rolled steel rolls SAE 1050 (CK 45). Main motor with braking system. Precision bending with brake motor. Wire grooves at roll ends. Spheroidal cast-iron main frames. Upper and lower rollers driven by a single gearbox and gear system (RM). Steel rollers with SAE 1050 quality certificate and high tensile strength. Built to CE safety standards

Cutting area round / square 90°: 255 mm / 210 x 210 mm Cutting area flat 90°: 310 x 210 mm Cutting area round / square 45°, right: 220 mm / 210 x 210 mm Cutting area flat 45°, right: 220 x 200 mm Cutting area round / square 45°, left: 230 mm / 200 x 200 mm Cutting area flat 45°, left: 230 x 200 mm Cutting area round / square 60°, right: 135 mm / 135 x 135 mm Cutting area flat 60°, right: 135 x 135 mm Sawband dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor recording power S6 40%: 2.2 kW Working height: 930 mm Delivery: - Saw band - Material stop - Manometer (band voltage) - Saw band hard metal guides - Vice with quick release - Integrated coolant equipment - Hydraulic iron lowering - Motor circuit breaker - Automatic final shutdown - Base

Standard equipment torsion-resistant, robust cast-iron saw frame driven shaving brush powerful industrial worm gear motor automatic shutdown after cutting end mechanical saw band tension with electrical band breakage monitoring Quick-release vice, movable Hydr. Saw frame lowering with rapid response function (infinitely adjustable) electric coolant pump Precision carbide saw band guides, ground (adjustable) large-sized round support table, with miter cuts, miter indicator (scale) to the operator side direct switching from manual operation to downing mode easily removable chip collecting tray Material stop 500 mm with scale incl. saw band combing gearing 4/6. Techniche Data Motor three-phase current 400 V, pole switchable 1.1/1.5 kW Saw band Dimensions 2720 x 27 x 0.9 mm Flywheels 300 mm Cutting speed 40/80 m/min. Vice-height span 275 mm Working height 978 mm Weigh ...

Execution semiautomatic 90° diameter: 600 800 x 600 mm Engine: 14,5 kW Blade: 9000 x 67 x 1, 6 mm Min. diameter: 10 mm Working height: 630 mm Weight: 4.3 to.

Used Metal Band Saw Internal machine number m3278 Manufacturer PEHAKA Type SM 4 Year of construction unknown Cutting width approx. 380 mm Total height approx. 1.95 m 2 Cutting speeds Table size approx. 625 x 480 mm Weight: approx. 350 kg Item location: 58730 Fröndenberg/Ruhr The machine can be visited and tried out under power. We will be happy to send you further photos by e-mail. A forklift/crane for loading is available. Prior sale is reserved. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data.B, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with transfer of risk t ...

BEKA-MAK BANDSAW TYPE BMSY-230 DGH -Half car mate -Hydraulic -2 Snelheden -Verstek Dubbel -Instelbaar Zaagdruk hydraulic -Koeling -Zaagblad 2730 x 27 x 0,9 mm -Voetbediening -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

ADAL BANDSAW TYPE HB 250 C. -2 Snelheden -Verstek Dubbel -Zaagdruk hydraulic regelbaar -Snelspanklem -Koeling -Afslag automatic -Zaagblad 2915 x 0.9 x 27 mm -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

BAND SAW 260 G-TYPE BS -2 Snelheden -Ver STeK -Zaagdruk hydraulic regelbaar -Snelspanklem -Koeling -Afslag automatic -Zaagblad 2455 x 0.9 x 27 mm -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)