Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163670036
New in: 1974

used

check Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

The machine has already been idle for ten years, without spare parts or accessories.

Category: 1410 pneumatics
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 161380966

used

check Seller: Aleman Machines e.K.
Location: Deutschland Land-de

add to watchlist

Tensile testing strength: 80 kN cutting speed: 30 m/min Shank diameter: 20 mm weight: 9.000 kg dimension: 1.815x2.015x4.275 mm -Control cabinet 2800x600x2200mm/1800kg/80kW -Cooling lubricant system 2300x1700x2400mm/1800kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 112 gear cutting and hobbing machines
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 163667975
New in: 2000

used

check Seller: HD Werkzeugmaschinenhandel GmbH
Location: Staufenberg 2

add to watchlist

pulling force - max.:2,5 t max. ram stroke:1000 mm max. workpiece diameter:40 mm Broaching speed:60 m/min. return speed:20 m/min. total power requirement:24 kW weight of the machine ca.:6 t dimensions of the machine ca.:1,7 x 2,4 x 4,77 m clamping plate:320 mm

Category: 109 other metal working machines
Latest update: 05.02.2024 add to watchlist
approved
dealer
item-No.: 141919
New in: 1987

used

Location: Land-de

add to watchlist

Gr. Pulling force 10 to, gr. Stroke 1000 mm , cutting speed 7.5 m/min, return speed: 24 m/min, weight: 6.2 to, built: 1987

Category: 109 other metal working machines
Latest update: 05.02.2024 add to watchlist
approved
dealer
item-No.: 374156
New in: 1959

used

Location: Land-de

add to watchlist

Gr. Pulling force: 16 to., gr. Stroke 1250 mm, Gr. Cutting speed: 5, 6 m/min Gr. Return speed: 30 m/min

Category: 107 sheet metal working
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163669840
New in: 1998

used

check Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

Max. duct cross-section: 160x160mm, max. straightening/ crosscut: 0,8-1,5x1500mm, controls: SPS-FS, without decoiler.

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 160243387

used

check Seller: Maquinas Talleres Luis Alonso SL
Location: fuente de cantos Land-es

add to watchlist

Electronic regulation of the cutting speed, Independent pumps for broaching and retraction, ALTISTART 48 motor starter, Counter for changing tools, Broaching speed: from 12 to 24 m / min, Cycle time: 16.4 sec., Jobs: 2, Max travel. from the brush: 1600mm, Position work: Vertical, Retraction speed: 24 m / min, Tons power: 16 Tn, Long table: 630mm, Capacity of hydraulic oil tank: 2,500 L., Total power: 75 Kw, Oil capacity cooling: 1,600 L, High: 6,750 mm, Working pressure: 100 Bar, Long: 6.260 mm, Voltage: 3 x 400 V, Weight: 13,100 Kg., Width: 4.200 mm, Delivery: Immediate, in stock to inspect, Possibilities to the delivery of the machine: Design and manufacture of a new tooling, installation in the customers home, Method of payment: To agree, Specification: Indoor and outdoor

Category: 109 other metal working machines
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 162813220

used

Location: Land-de
Price: 450 € add to watchlist

Broaching tool, broach needle, special tool, grooving tool, keyseating machine, grooving machine, grooving machine, grooving tool -Number: 2x tool available -Price: complete 2 pieces -1x tool: Ø16 0.056 -1x tool: Ø15.75 x 16Ø S8 -Weight: 2kg

Category: 1402 other machines for mechanical handling
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 162817789

used

Location: Land-de
Price: 550 € add to watchlist

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Manufacturer: Forst-Enor, switching pump RSWV40 -Motor: AEG -Power: 4 kW -Speed: 1420 rpm -Delivery rate: 40 l/min -Dimensions: 2000/455/H500 mm -Weight: 156 kg

Category: 109 other metal working machines / Broaching Machines
Latest update: 05.02.2024 add to watchlist
approved
dealer
item-No.: 144523930
New in: 1966

used

Location: Land-de

add to watchlist

hydraulic internal clearing machine in good operational condition Clearing stroke:1.500mm Tension: 16,000 KG â?¢ the drawing head shot in the drawbridge:85mm Through-hole in the clamping table: 120mm Workpiece diameter: max. 750mm (due to the machine body of the tool feeder) Cutting speed: hydraulically infinitely adjustable from 1 m/min to 6m/min Return speed: hydraulically infinitely adjustable from 5m/min to 30m/min Dimensions of the machine: (bx t x h) approx. 6,600 mm x 800 mm x 1,500mm (without working area) Power supply / connection power: 380Volt 50 HZ /8.0 KW Accessories / Optional equipment: â?¢ the machine has an electrical control for clearing lifting movement â?¢ the machine has an integrated cooling cutting system â?¢ the machine has a flanged machine bed with a manual tool feeder The machine is ideal for the produ ...

Category: 109 other metal working machines / Broaching Machines
Latest update: 05.02.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 144523932
New in: 1967

used

Location: Land-de

add to watchlist

used mechanical vertical internal clearing machine in very good condition. Pulling force at 3m/min: 3000 KG Clearance speed: 3m/min Return speed: 3m/min maximum stroke: 800mm Ropcmo87 maximum tool length: 1000mm Table area: 350mm x 220mm Table break-in: 90mm Workpiece diameter: any Dimensions (h x w x t): 1260 x 500 x 720mm Engine power: 1.1 / 1.5KW Power supply: 380 volts 50 HZ Accessories / Optional equipment: - integrated coolant / cutting agent system - Machine documentation Comment: The double spindle drive ensures a quiet and central pulling point as well as a constant clearance speed. The machine is mainly designed for the production of spring springs up to 20mm. The machine has been partially overhauled, all bearings, shaft seals and seals of the trapezoidal spindles and gearbox have been renewed. The drawing head is re-ground and adjusted, the machine body is  ...

Category: 109 other metal working machines / Planing, Shaping, Slotting And Broaching Machines
Latest update: 05.02.2024 add to watchlist
approved
dealer
item-No.: 14621150
New in: 1993

used

Location: Land-de

add to watchlist

vert. Internal broaching machine maximum tractive force: 10T Max stroke: 1000 mm Max cutting speed: 10.9 m / min Max reverse speed: 27.5 m / min Clamping surface: 400 x 400 mm Room set: 3 piece

Category: 109 other metal working machines / Broaching Machines
Latest update: 05.02.2024 add to watchlist
approved
dealer
item-No.: 96629161
New in: 1980

used

Location: Land-de

add to watchlist

Tractive effort: 63 to Length: 2000 mm Room set: 3 piece

Category: 109 other metal working machines / Broaching Machines
Latest update: 05.02.2024 add to watchlist
approved
dealer
item-No.: 96629166
New in: 1989

used

Location: Land-de

add to watchlist

Manufacturer: Noise Model: RS4/1000 machines no.: 5123/706 Year of construction: 4/1989 weight: approx.: 540 KG General information / technical data: used mechanical vertical Innenräummaschineim of very good immediate quiet machine running Zugkraftbei 3m / min: 4000 KG Räummgeschwindigkeit: 3m / min and 5m / min Return speed: 10 m / min maximum stroke: 1000mm maximum tool length: 1200 mm Table area: 450 mm x 250 mm Table breakthrough 90 mm Workpiece diameter: any Dimensions: h x w x d 1610 x 630 x 855 mm Engine power: 2.2 / 4,7KW Stromversorgung380 Volt 50 HZ Optional accessories: -Kühlmittel / thread cutting fluid pump electric power meter -electrical scanning of the clamping JAWS (tool collection control to prevent against accidentally driving back the drawbridge) Comment: The double spindle drive ensures a quiet and ...

Category: 109 other metal working machines / Broaching Machines
Latest update: 05.02.2024 add to watchlist
approved
dealer
item-No.: 144522145
New in: 1966

used

Location: Land-de

add to watchlist

used vertical hydraulic internal clearing machine with 3 clearing points in very good condition Pulling power:8.000 KG Clearance length: 1000mm Bgno2qtoyx Clearing: 3 pieces (4 pieces) Distance between clearing points:100mm Mounting diameter of the drawing heads3 x x 85mm Workpiece diameter: max. 1x 460mm / 2x 198mm / 3x 98mm Cutting speed: hydraulically infinitely adjustable from 1m/min up to max. 7m/min Return speed: hydraulically infinitely adjustable from 5 to max. 25m/min Space requirement of the machine (b x t x h) approx.:1400 x 2000x 3600mm (without service & operator environment) Power supply / connection value: 380Volt 50 HZ / 6.5 KW Accessories / Optional equipment: -manual and automatic clearing operation - Drawbridge for 3 clearing points - Workpiece table for 4 clearing points (only usable with special pullheads) - automatic tool feeder - tension dis ...

Category: 109 other metal working machines / Broaching Machines
Latest update: 05.02.2024 add to watchlist
approved
dealer
item-No.: 145157969
New in: 2004

used

Location: Land-de

add to watchlist

General / technical data: used mechanical vertical internal clearing machine in very good condition. Pulling force at 3m/min: 4000 KG Clearance speed: 3m/min Return speed:6m/min maximum stroke: 1000mm maximum tool length: 1200mm Table area: 450mm x 250mm Table break: 90mm Workpiece diameter: any Dimensions ( h x w x t): 1610 x 630 x 855mm Engine power: 2.2 / 3.5KW Power supply:400 volts 50 HZ Accessories / Optional equipment: - integrated coolant/cutting agent system -electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge) - Central lubrication system - CE machine marking Comment: The double spindle drive ensures a quiet and central pulling point as well as a constant clearance speed. The machine is mainly designed for the production of spring springs up to 20mm. The machine has a very quiet machine  ...

Category: 109 other metal working machines / Planing, Shaping, Slotting And Broaching Machines
Latest update: 09.10.2023 add to watchlist
approved
dealer
item-No.: 146701947

used

check Seller: AUER
Location: 4407 Steyr-Gleink Land-at

add to watchlist

Curve planer

Category: 109 other metal working machines / Broaching Machines
Latest update: 25.03.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 153930359
New in: 1982

used

check Seller: Vramac Machines bv
Location: 7327 Apeldoorn Land-nl

add to watchlist

Code 6377 Omschrijving Ruimautomaat Abrikaat Nachi Fujikoshi Type BV 2A 15 Model NUV 5 CDH Bouwjaar 1982 Capaciteit 15 Ton Max. slag / stroke 1700 mm Snelheden 7000 mm/min Vermogen 35 kVA – 50 HZ

Category: 109 other metal working machines
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157811457

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Capacity: 0 t Stroke: 0 mm Number of broaches: 0   CNC Brand: 0 CNC Model: 0 Technical data Max. length of stroke: 1250 mm Traction power: 10000 kp vertical Cutting speed: stepless from: 1 m/min up to: 8 m/min Return stroke speed: 36 m/min Work-piece diameter: 380 mm broach diameter: 85 mm Broaching tool receiv.dm: 40 mm Voltage 50 Hz 3x: 380 Volt Total installed power: 11.22 kW Overall dimensions machine: Length: 1400 mm Width: 1250 mm Height: 3600 mm Various accessories: Chip conveyor

Category: 109 other metal working machines / Special Purpose Broaching Machines
Latest update: 13.01.2024 add to watchlist
item-No.: 160203275
New in: 2016

used

Seller: CS-Maschinen
Location: 66701 Beckingen Land-de

add to watchlist

Frömag electromechanical lifting table broaching machine Type FTR9-0-1000-PPC Year of construction 2015 IBN 01/2016 Stroke length 1000mm Drive power 30kW Tractive force 90kN Clearing speed 0 – 10 m/min Return speed 0 – 20m/min Chip conveyor with magnetic tape Machine is in a used very good condition

Category: 109 other metal working machines / Chain-Type Broaching Machines
Latest update: 05.02.2024 add to watchlist
approved
dealer
item-No.: 160238529
New in: 1990

used

Location: Land-de

add to watchlist

Manufacturer: Karl Klink Model: RKW 25-3800-520 Weight: 50t Year of construction: 1990 Machine no.: 3048 & 3047 General / technical data: Chain broaching machine for continuous outdoor clearing Pulling force: 25.000kg Cutting speed: 7.2 / 8.1 / 9.6m/min Maximum tool length: 3520mm Passage width: 520mm Tool carrier clamping surface: 3520 x 460 mm Dimensions: 12.300 x 6.400 x 4650mm Power Supply: 380V 50Hz/110kW Accessories/ Special equipment: - 6 tool carriers for tool change - Machine documentation Remark / General The machines are in good condition. The machines are dismantled with us in the Bearing. The total volume of the plant comprises several trucks (approx. 70 tons per machine). The machines have produced connecting rods for passenger car diesel engines. Chain scrapers are designed for use in mass production. The continuous ( ...

Category: 109 other metal working machines / Broaching Machines
Latest update: 05.02.2024 add to watchlist
approved
dealer
item-No.: 160331493
New in: 2000

used

Location: Land-de

add to watchlist

General / technical data: Manufacturer: Rausch Type: RS6/1000 Year of construction: 07/2000 Machine no.: 60305 Weight: approx. 750kg Tractive force: 60kN (80kN) Clearing speed: 4m/min Return speed: 8m/min stroke: 1000mm Maximum tool length: 1200mm Maximum workpiece diameter: Ø approx. 900mm Table opening: Ø 90mm for standard clearing mandrels Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h=table height to the floor without superstructures) Current type: 400 Volt / 50Hz – 6 / 7,5kW Accessories/ Special equipment: – electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge) – integrated coolant system with check valve and drain valve – patented coolant/lubricant swivel system (retrofitted) Remark: The machine has the manufacturer CE marking. The machine is energized in our wareho ...

Category: 109 other metal working machines
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 160723525

used

Location: Land-nl

add to watchlist

Capacity: 2 t Stroke: 500 mm Number of broaches: 1   Key width 2 - 50 mm Pulling force 16.000 Nm Max. diameter product 500 mm Boring diameter 10 - 350 mm Large package key seating broching tools Table  Ø:     675 x 550mm Table load:   2000 Ram adjustment:0 - 400mm Length:       1200mm Width:        1450mm Height:       1600mm Weight:       1450kg

Category: 109 other metal working machines / Broaching Machines
Latest update: 28.02.2024 add to watchlist
approved
dealer
item-No.: 163466234

used

check Seller: ENGINEX KOSICE
Location: 040 0 Kosice Land-sk

add to watchlist

Arthur Klink broaching machine

Category: 109 other metal working machines
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 122419295
New in: 1995

used

check Seller: ZOMA Maschinenhandel
Location: Eilenburg Land-de

add to watchlist

Vertical internal broaching machine, used Vertical internal - broaching machine. used Type / type: RITS 16 x 1500 x 500 Manufacturer / make: Artur Klink year / new: 1995 Biggest tensile strength / maximum pulling power: 16 t Max stroke length / max broaching length: 1500 mm Table width / table width: 500 mm Räumgeschwind. / broaching speed: 1..6, 4 m / min Rücklaufgeschw. / return speed: 19.5 m / min maximum tool length / max length of tool: 1700 mm Power consumption / connected power: 42 kW Size / weight: 16 t Specification: optional spaces right or left, and at the same time right and left / / 2-jobs broaching right or left / right and left at the same time

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
RESALE used machinery 25 years online