We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Manufacturer: Sonic Air Systems Year: 2007 Type: Sonic 70 Power: 5.5 kW Dimensions: - Total height: 2300 mm - Width: 1000 mm - Length: 1000 mm - Bottle inlet height: 1530 mm The machine has been renovated and is ready for installation.
used
WIWOX MC 110 II ultrasonic cleaning machine, built in Germany in 2004, cleans metal parts from unwanted deposits using ultrasonic waves. The use of such technology allows for fully professional cleaning of workpieces, as well as preventing surface damage and saving time and costs. The ultrasonic cleaning machine allows for cleaning workpieces weighing up to 110 kg, even in the most inaccessible places. The cleaning process takes place in a working chamber with dimensions (L x W x H) of 516 x 360 x 435 mm, where the placed workpiece is cleaned by ultrasonic waves at a temperature of 80°C for approximately 5-15 minutes. The total weight of the device is 280 kg. Specification of WIWOX MC 110 II ultrasonic cleaning machine - dimensions of the working chamber (L x W x H): 516 x 360 x 435 mm - maximum weight of workpiece: 110 kg - ultrasonic power: 1.2 kW - connection power: 6.2 kW ...
used
Tub dimensions: 825x800x875mmm, max. load: 500kg/tub, connected load: 21.6kW, length: 3765mm, width: 1235mm, height: 1290mm, weight: 950kg, with documentation.
used
Ultrasonic cleaning system WIWOX, Type MC360 III Year of construction: 2006 € 51,438.00 was the original price at that time. After deducting consumables, it was € 47,650.00. The plant was in operation for about 8-12 hours a week, but in the last 5-6 years it has hardly been used because it has switched to a different technology. Our asking price would be € 15,000.00 on the basis of negotiation.
Ultrasonic cleaning system WIWOX, Type MC360 III Year of construction: 2006 € 51,438.00 was the original price at that time. After deducting consumables, it was € 47,650.00. The plant was in operation for about 8-12 hours a week, but in the last 5-6 years it has hardly been used because it has switched to a different technology. Our asking price would be € 15,000.00 on the basis of negotiation.
used
Used machine in good condition. Available for immediate delivery. - Number of turret stations (pcs): 20 - Operating hours: 21.500 - Axis speed [X axis] max: 90 m/min - Material thickness (punching) max: 8 mm - Control type: SIEMENS 840D - Compressed air pressure min: 300 bar - Turret rotation: 30 r/min - Oil tank capacity: 330 l - Axis speed [Y axis] max: 60 m/min - Working area max: 1.270 x 2.530 mm - Punching force: 230 kN - Punch diameter max: 89 mm - Max. workpiece weight: 200 kg
used
Large Format 3000 x 1500mm With Automation Siemens 840
used
Combination laser punching FINN POWER LB6 Year 2003 3000x1500
used
Used machine in good condition. Available for immediate delivery. - Number of turret stations (pcs): 20 - Turret rotation: 166 r/min - Operating hours: 48.000 - Axis speed [X axis] max: 150 m/min - Compressed air pressure min: 6 bar - Control type: Siemens Sinumerik 840D - Punch diameter max: 89 mm - Power supply: 80 kVA - Axis speed [Y axis] max: 150 m/min - Working area max: 1.500 x 3.000 mm - Punching force: 300 kN - Material thickness max: 8 mm - Material thickness (punching) max: 8 mm - Material thickness aluminium max: 50 mm - Material thickness steel Fe52/Fe37 max: 4 mm - Oil tank capacity: 400 l - Material thickness stainless steel max: 3 mm - Weight: 28.000 kg
used
Hello, I have to sell a punching machine finn power lp6 laser trwagon welman 2500
used
Finn Power A5-20FB CNC Punch Press Table size : 1250x2500 (6000 mm with reposition) Number of station : 21 Fanuc control system 23 Ton 3 clamps Conveyor Original Cam program Working hour: 25005 ( April 2023)
used
Finn Power A5-20FB CNC Punch Press Tools are included Machine is in very good condition
used
30 ton 1250 x 2500mm
used
Capacity (x): 0 Process Application: 0 Other Info: 0 Technical data Dimension of the workpice:: Ø 1 - 7 mm Voltage 50 Hz 3x: 380 Volt Total installed power: 3 kW Overall dimensions machine: Dimensions:: 900 Length: 700 mm Width: 600 mm
used
Set of tools included - Number of turret stations (pcs): 20 (D 2x Index, B, 10x, 6 6X (2x Index) - Simultaneous positioning speed (X / Y): 106 m/min - Control type: SIEMENS 840D - Compressed air pressure min: 6 bar - Axis speed [Y axis] max: 60 m/min - Punch diameter max: 89 mm - Max. workpiece weight: 200 kg - Axis speed [X axis] max: 88 m/min - Operating hours: 52.300 - Working area max: 3.061 x 1.528 (6.000 repo) mm - Punching force: 300 kN - Material thickness (punching) max: 8 mm - Power: installed max: 30 kW - Compressed air consumption max: 30 l/s - Weight: 13.500 kg
used
Machine has 30tns, 3000*1500, sheet thickness max 8mm, stamping speed 1100 hits/min, max positioning speed x/y 80/160, simultanious 100m/min, Siemens 840D, - scrap conveyor SC1T - Lifting scrap conveyor SC2 - Sheet lubrication, - Tool lubrication - Light guards 5 - safety net LD3000 - GSM Alarm - RS scrap conveyor - Lifting scrap conveyor RSC2 - tool adjust ACS - C1500 sorting belt conveyor - STS 3015 stacking system. - Control type: Siemens Sinumerik 840D - Compressed air pressure min: 6 bar - Power supply: 80 kVA - Operating hours: 45.000 - Number of turret stations (pcs): 20 - Turret rotation: 166 r/min - Axis speed [X axis] max: 150 m/min - Punch diameter max: 89 mm - Axis speed [Y axis] max: 150 m/min - Working area max: 1.500 x 3.000 mm - Punching force: 300 kN - Material thickness max: 8 mm - Material thickness (punching) max: 8 mm - Material thicknes ...
used
Key data: 23 Siemens, 2565 840 D, 1295
Pressure: 23 t Sheet length: 2565 mm Sheet width: 1295 mm Positions ATC: 52 CNC Brand: Siemens CNC Model: 840 D Table load: 200Kg Working area X Axis: 2.565mm Working area Y Axis: 1.295mm Punching force: 23T Maximum sheet thickness: 4mm Turret position: 52 Auto indexing positions: 4 Positioning speed X and Y Axis:90.000mm/min. Length: 7.400 mm Width: 5.500 mm Height:   ...
used
Pressure: 23 t Sheet length: 2565 mm Sheet width: 1295 mm Positions ATC: 52 CNC Brand: Siemens CNC Model: 840 D MACH-id 5336 MAKE Finnpower TYPE E5 Evolution YOP 2000 SPECIFICATIONS Table load in Kg 200 Kg Working area X Axis 2565 mm Working area Y Axis 1295 mm Punching force 23 T Maximum sheet thickness 4 mm Turret position 52 Auto indexing positions 4 Positioning speed X and Y Axis 90.000 mm/min. Control SIEMENS 840 D incl. Multi tool 24/8 incl. ...
used
Pressure: 30 t Sheet length: 3000 mm Sheet width: 1500 mm Positions ATC: 0 CNC Brand: Siemens CNC Model: 840 D MACH-id 446 MAKE Finn Power TYPE SC 6 Shear Genius YEAR 2003 SPECIFICATIONS Controll Siemens 840 D Capacity Ø x plate thickness 89 x 8 mm Press force 30 Ton Table size Length x Width 3000 x 1500 mm Working speed 100 M/Min Hydraulic / Mechanical Hydraulic DIMENSIONS Length 8000 mm Width 6000 mm Height   ...
used
Capacity: 30 t Number of strokes per/min: 0 Day light: 0 mm Front distance between columns: 0 mm CNC Brand: Siemens CNC Model: 840 D MACH-id 5212 MAKE FinnPower TYPE C5 Compact Express YOP 2009 SPECIFICATIONS Table load in kG 200 Kg Working area X Axis 2584 mm Working area Y Axis 1270 mm Working area X Axis with override 5168 mm Punching force 30 T Maximum sheet thickness 8 mm Turret position 20 Auto indexing positions 2 x Multi tool Positioning speed X and Y Axis 10800 mm/min. Change speed revolver 166 Rpm ...
used
Technical characteristics: Model: TP 4025BIF3 / 21 / AM The year of production: 1994 Three-phase machine: 3x 400 V, 50Hz Power: 50 kVA Press power: 300 kN Weight: 11 t
used
Description: Machine in good technical condition, possibility of testing after agreement. Table size: 2500 x 1270mm. Heidenhain 840D system. Accessories: punches and grinder.
used
Machine weight: 13000 kg Sheet format: 2500 x 1250 mm Max. punching force: 300 kN Max. metal sheet thickness: 8 mm
used
Includes interesting set of tools - Turret rotation: 30 r/min - Compressed air pressure min: 6 bar - Control type: SIEMENS SINUMERIK 840D - Operating hours: n/a - Number of turret stations (pcs): 20 - Axis speed [X axis] max: 120 m/min - Max. workpiece weight: 13.000 kg - Punch diameter max: 89 mm - Axis speed [Y axis] max: 60 m/min - Power supply: 35 kVA - Punching force: 300 kN - Working area max: 3.074 x 1.565 mm - Material thickness (punching) max: 8 mm - Oil tank capacity: 200 l
used
This FINN POWER TP2515I/21/AM Punching machine was manufactured in the year 1996. It is equipped with a Siemens SINUMERIK System 3 control unit. The machine has a punching force of 300 kN.