We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
new
Length: 5000 mm Width: 750 mm Height: 3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Length: , Width: , Height: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Technical data Execution: barrel-burnishing Number of tanks: 2 Polishing bell Behältergrösse: hexagon up: 400 mm Charging hole:: 2 x Length: 150 mm Width: 150 mm Voltage 50 Hz 3x: 380 Volt Driving motor (motor power): 2.2 / 1.6 kW Overall dimensions machine: Length: 900 mm Width: 800 mm Height: 1300 mm
used
Glasbeek Finish Gas Chamber Oven G.11.01 200°C 54kW Glasbeek Finish Gas chamber furnace Maximum temperature 200°C Electrical connection 4 kW 54 KW 3x380V Approximate internal dimensions (W1900mm x D3000mm x H1880mm)
used
Glasbeek Finish Gas Chamber Furnace Type G.11.01 Glasbeek Finish Gas chamber furnace Type G.11.01 With loading trolleys Maximum temperature 200 ° C Year. 1991 3 x 380 V 54 kW Approximate internal dimensions (W1900mm x D2940mm x H1965mm)
used
Without documentation, the internal coating is worn and should be repaired.
used
We offer two chamber furnaces of type 1 G1101 from Glasbeek Finish BV. Burner: 2. Heating medium: natural gas. Heating capacity: 200kW to 450°C. Footprint: 3400x2400.
used
Length: 2700 mm Width: 1100 mm Height: 850 +- 150 mm engine output: 0,37 kW Electric capacity: 0,5 kw compressed air: 6 bar Horizontal impregnation system Pro flow for individual parts with rinsing circuit. --------------------------------- Features: Machine for horizontal flooding of individual parts. The product will go through flooded a row of nozzles. The excess product is then removed through air jets blown off. The pump and the air nozzles are controlled automatically and only then operated when the workpiece passes through. In this way the Compressed air consumption reduced. The circulation operation ensures minimal product consumption. --------------------------------- Construction features: structure Sturdy steel frame, painted with high-strength, water-soluble products. Machine body made of heat-sealed, thick polypropylene plates. 4 independent chambers for inlet, flooding, blo ...
used
Fini compressor complete with dryer and 500 L tank year 2020
used
Description: Power: 2.2 kW For further technical data, see type plate Approx. Onsite Dimension. (l x w x h): 970 x 440 x 700 mm, weight approx.: 40 kg
used
Description: Operating voltage: 230 V Frequency: 50 Hz Connection: 350 W Drilling depth: 13 mm Speed: 515 - 2580 rpm Approx. Onsite Dimension. (l x w x h): 500 x 200 x 500 mm, weight approx.: 20 kg
used
Type: 100 FSG, Y&l: 1986, granulation plant with circular gas operation, sifter 100 ATP (4 kW Vario, up to 11,500 rpm), and reblow filter K 6 R (2.4 m2 filter area). All in stainless steel. Very good condition.
used
11.80 kW, max. 10.5 bar, 56.50 m3/min.
used
14.5 bar, 22.80 m3/min, refrigerant R 404a.
used
14.5 bar, 43.50 m3/min, refrigerant R 404a.
used
Engine type: dry air dryers for plastic Year of manufacture: Overhauled 2017 Color: Turquoise Dry air flow: 10 m ³/h Dry air heating power: 1.1 kW Drive capacity: 0.4 kW Total final value: 1.5 kW Width: 84cm depth: 49, 5cm height: 220cm weight: 80kg Additional information: drying hopper 25 l GRP Completely overhauled with guarantee (not on wearing parts) Storage location: Germany Machine type: Dry air dryer for plastics Year of manufacture: Overhauled 2017 Colour: Turquoise Dry air flow rate: 10 m³/h Heating capacity dry air: 1.1 kW Drive capacity: 0.4 kW Connected Waterberg days: 1.5 kW width: 84cm depth: 49.5cm height: 220cm weight: 80kg Additional information: dry air hopper 25l overhauled with guarantee (not for wearing parts) Location: Germany
used
Used stainless steel fluid bed dryer made by Glatt model WST CD 30. New 1988. Pressure 2 bar. 15 KW ventilator, air heater and cyclones included. Unit still installed. Control Panel.
used
Just arrived, tested and ready for sale: high-quality package of BOGE compressors and dryers in very good condition and few hours.
used
Just arrived, checked and ready for sale. Nice Package of used BOGE air compressors and dryers in excellent condition and low working hours.
used
CKT 500 52 kW heating to dry cooking dryer is sold by granulate or regrind. Container for approx. 800 kg bulk.
used
Stationary drying plant for cereals, grass, leaves, potatoes, sugar beet and similar products. Dimensions of the drum Drum length approx. 10 m Drum outside approx. 2.50 m Total weight drum approx. 21520 kg The facility is still in place and can be visited on site by appointment. (Saxony) In addition, but not included in the price, the following components can be offered: Product feed (conveyor belt) Suction and dust removal Cyclone separators The drum was lined in 2010 with new sheets (high-temperature resistant stainless steel). After that, the plant was only operated for one season. Of course, disassembly, loading and transport costs are not included in the purchase price.
used
The belt dryer / continuous dryer is used for the continuous drying of coatings on smooth surfaces such as glass. Manufacturer TESOMA GmbH Type LYNX Version 16-E-HHH-X Built in 2008 Bandwidth 1600 mm Flow height 400 mm Inlet length 500 mm 3 hot air segments per 2000 mm Outlet length 500 mm drying temperature 100 °C solvent throughput 7.00 kg/h at minimum exhaust air volume flow 1500 m3/h Tape speed 0.5 - 5 m/min Connected power 89 kW Heating capacity 79 kW total motor power 10 kW (fan and drive) Total dimensions Width: approx. 2400 mm Length: approx. 8800 mm Height: approx. 1800 mm For a visit, please make an appointment.
new
The "floor" of the dryer cooler consists of a nationwide, often special ventilation hopper system with downstream forced discharge. Depending on the customer application and products, this hopper system is additionally created with anumable fixtures. The roof-shaped design prevents the products from flowing freely. The filling and emptying of the cooler can be carried out continuously, fully automatically or in set / circulation. The standard cooler dimensions are 3x3 m and up to 18 meters high, depending on the number of superstructures, depending on the customer's requirements. for maize, cereals, rice, granules and other free-flowing products
used
Horizontal vacuum bucket dryer mixer Knea dryer 7000 ltr. Used Double-walled vacuum mixer/dryer with heated wall and heated inner tube. With outlet opening, filling dome and service lid, for efficient drying, thickening of products and (contaminated) waste sludge waste. Built: 1997, is currently being regenerated Volume: 7,000 litres Temperature: 151°C Pressure / vacuum 5 bar / - 1 bar (according to pressure gauge), vacuum pump and electric boiler can be offered, as well as up to the customer-specific system Gearbox output speed: approx. 42 rpm (i = 32.8) Transmission power (1,400 rpm): 50 kW Mixer chamber: approx. 1,600 x L 4,400 mm Total dimensions: approx. 6,600 x 2,200 x 3,600 mm Changes and errors in the technical data, data and prices and intermediate sale reserved.
new
This evaporative dryer was built in Hungary by DKG-EAST RT in 1995. The equipment was transported to Finland, where it was inspected by Finnish Inspecta in 1999. The original purpose of this equipment was to concentrate waste water solution from a molasses production process by evaporating water, but the system was never installed. The certified pressure for the equipment is max 2.0 bar, min -1.0 bar. The input heat for the evaporation comes from steam of 200 °C. The equipment is suitable for similar purposes, concentrating waste water streams from various processes and thus reducing the amount of waste water to handle. Capacity in molasses wash water evaporation: Input of thin stillage: 30.0 t/h, 8.5 % Output of product stillage: 3.54 t/h, 72 % Steam input: 3.9 t/h, 200 °C, 11018 MJ/h Heater 1. Price 90.000 € Nominal heat surface 512 m², actual heat surface 518 m². Max ...