used FASTI Circular Shears

Guillotine shears, FASTI type 506-10-2,5 Masch. Nr. 96-506-018 Year of manufacture 1996 Cutting length 1030 mm Cutting thickness 2.5 mm Working height 850 mm Drive power 4 kW Mains connection 400 volts, 50 Hz. - mechanical sheet metal hold-down - electric foot switch - simple backgauge 550 mm with handwheel adjustment - 2 support arms 550 mm - angle stop right 750 mm - protective housing SICK behind the machine - control cabinet fixed to the machine space requirement L x W x H 2150 x 1650 x 1400 mm weight 650 kg good condition; used

Max. sheet thickness: 2 mm steel Max. blank diameter: 750 mm Motorized drive via foot switch

Max. plate width: 1000mm Unloading: 500mm

Specifications: - working width 2540 mm - max. cutting capacity St 40 4 mm - mot. Cutting angle adjustment - Cut gap. by scaled adjustment screws - Number of hydraulic holders 14 pcs - Mot. backgauge with positioning. 10 - 1000 mm - Stroke rate depending on cutting angle and cutting length 23 per min - Hydraulic drive 400 V / 7.5 kW - Table height 1030 mm - Space requirement approx. W 2500 x H 1630 x D 2150 mm - Weight approx. 3600 kg - with: - Sheet metal holding pneum. supported - front angle stop + support arms - Electronic cutting depth adjustment - Cut line lighting - E-foot switch

cutting length: 1030 mm sheet thickness: 2.5 mm steel Motor-adjustable backgauge up to 1,000 mm in 2 speeds with digital display Pneumatic sheet metal holding up Side stop and table extension Knife sharpened Weight approx. 1000 kg

Sheet thickness: 10,00 mm void: 0 Table length: 2000 mm Table width: 0 mm Knife length: 0 mm MACH-id       517 MAKE            Fasti        TYPE              528 20/10 YOP               2003 SPECIFICATIONS Cutting lenght      2000 mm Maximum sheet thickness      10 mm Backgauge stroke X in mm        1000 mm Power resonator  kW / Amp      15 kW DIMENSIONS Length         2800 mm Width           2625 mm Height         2080 mm

Motorized crank sheet metal shears make FASTI type 507 15-3.5Machine -No: 84517010 built in 1984Technical specifications:Cutting length: 1540 mmmax.sheet thickness: 3.5 mmAdjustment range of backgauge: 1500 mmStrokes per minute: 56Drive power: 7.5 kWWeight approx: 1610 kgwith- Front-operated motor stop with digital display and 1 dimension preselection- foot switch- single stroke - continuous stroke - jogging- Side stop 750 mm- 2 table extensionsused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Working length:1040 mm Sheet thickness: 4 mm Cutting angle: 1.6° Backgauge: 10 - 750 mm Number of hold-downs: 1 (13000N) Side stop: 70 - 850 mm Travel speed: 90 mm/s Projection (WxH): 20 x 125 mm Weight, ca.:1600 kg Dimensions (WxDxH), approx.: 1850 x 1870 (3120) x 1550 mm Equipment: - Motorized backgauge - Foot control - Emergency stop impact button -Operating instructions - Table widening

Max. cutting length: 1040 mm Max. sheet thickness: 2.5 mm steel Manual backgauge with hand crank up to 500 mm Side stop and table extensions

Hydraulic guillotine shears FASTI type 509 - TCHE 12/4 Masch. No. 4590 Year of construction 1986 Cutting length 1255 mm Cutting thickness at 400 N/mm² 4 mm Cutting thickness at 750 N/mm² 2.5 mm Back gauge 1000 mm controlled Shear angle 1.5 Hydraulic pressure max. 270 bar Motor power 7.5 kW Mains connection 400 volts, 50 Hz Back gauge with positioning control ELGO ELECTRIC Type 85 - manual cutting gap adjustment with dial gauge display on the right and left- infinitely variable cutting length adjustment - front angle stop left 1250 mm- 7 pieces hydraulic sheet metal hold-downs - electric foot switch - very solid and torsion-resistant welded construction - operating instructions with electrical plan, hydraulic plan space requirements L x W x H 1900 x 2200 x 1660 mm Weight 2600 kg good condition; used

Plate shears, sheet metal shears, sheet metal shears, crank plate shears, guillotine shears -Manufacturer: Fasti, mechanical guillotine shears type 506/20/2 -Cutting width: 2030 mm -Max. Cutting thickness: 2.0 mm -Back gauge: adjustable by hand -Throat: 545 mm -Stroke: continuous stroke / single stroke / tapping -Setup dimensions: 2505/1650/H1150 mm -Transport dimensions: 2505/1100/H1150 mm -Weight: 1200 kg

Key data: 1030 mm, 2 mm

Max. cutting length: 1030 mm Max. sheet thickness: 2.5 mm steel Manually adjustable back gauge up to 530 mm Cutting angle adjustment Side stop and table extension Knife sharpened Weight approx. 800 kg

Key data: 1040 mm, 4 mm

Max. cutting length: 1040 mm Max. sheet thickness: 4 mm steel Manual backgauge up to 550 mm Side stop and table extensions The rear area is secured by a safety fence with light barriers Knife sharpened Instruction manual available Weight: 1600 kg

Max bending length: 1020 mm Max. sheet metal rod: 2 mm steel motor upper cheek adjustment via foot switch manual rear stop diverse bending rails

Maximum cutting length: 4000 mm Maximum sheet thickness: 4 mm steel Driven back gauge to 1000 mm Page fence and table extensions Cutting length limit Cutting edge lighting Protection fence, roll with safety switches Weight: 8500 kg

CNC swivel bending machine make FASTI type 2095-12-3Machine -No: 85295040 built in 1985Technical specifications:Usable length: 1270 mmmax.sheet thickness: 3.0 mmStroke of the upper beam: 350 mmAdjustability of the lower and bending beam: 80 mmDrive power bending / upper beam: 2.2 / 1.5 kWWeight approx: 1480 kgExternal dimensions: 2500 x 3600 x 1700 mmWith- CNC stop table 2500 mm- foot switch- Two-handed disengagement- CNC screen control with floppy disk driveSPECIAL PRICE as a spare part dispenser or for reconstructionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized swivel bending machine make FASTI type 2095/10/4Machine -No: 91295055 built in 1991Technical specifications:Usable length: 1020 mmmax.sheet thickness: 4.0 mmStroke of the upper beam: 350 mmAdjustability of the lower and bending beam: 80 mmMotor power bending / upper beam: 2.2 / 1.5 kWWeight approx: 1420 kgExternal dimensions approx .: 2113 x 900 x 1500 mmWith- foot switch- Operating modes: individual switching for each work step Automatic operation for a complete work cycle- Bending angle adjustment via digital display- Tear stopATTENTION: The bending beam is torn in 2 external places: and professionally welded.usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. Wald ...

Motorized swivel bending machine make FASTI type 212 30/4Year of construction 1980Technical specifications:max.working length: 3040 mmmax.sheet thickness: 4.0 mmOpening width of the upper beam: 350 mmAdjustability of the bending and lower beam: 80 mmBending angle preselection: 0 - 180 °:Drive power upper beam: 4.0 kWDrive power bending beam: 7.5 kWWeight approx: 6500 kgExternal dimensions approx. (Without back gauge): 4500 x 1200 x 1800 mmWith- FASTIMATIK electronic control- 2-way goat tool- additional bending railsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manual folding machine make FASTI type 206/5-20-2.0Machine -No: 7126061, built in 1971with additional motorized upper beam adjustmentTechnical specifications:max. working length: 2040 mmMax. sheet thickness: 2.0 mmStroke of the upper beam: 200 mmAdjustability of the lower and bending beam: 80 mmWeight approx.: 1830 kgWith- counterweight- motorized upper beam adjustment (without function)- foot switchusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Key data: 2040 , 2

Motorized swivel bending machine Manufacturer Fasti Type 2095-20-2 Sheet power 2040 x 2 mm at 400 N/mm2 Digital display of the bending angle Foot pedal Notaus Power connection 400V

The machine is in good technical condition. Max. sheet length: 3000 mm Max. sheet thickness: 4 mm Weight: 4400 kg Upon prior agreement, the possibility of an inspection in progress.

Working width: 2040mm, max. sheet thickness: 3mm.

sheet width: 2040 mm plate thickness: 3 mm daylight upper clamping: 350 mm bending angle max.: 0-135 ° adjustment of lower and bend clamping: 80 mm control: Fastimatic M200 power requirement: 2,2/1,5 kW weight of the machine ca.: 2460 kg dimensions of the machine ca.: 3,2 x 2,8 x 2,1 m Condition: ready for operation: Condition: very good: CE signed: Electric 400 Volt: CNC-control with screen: Mot. back gauge: 1000 mm Foot switch: Motorized machine with motorized bending beam adjustment for setting the sheet thickness, screen control Fastimatic M200 (DELEM FM 200 B) for controlling the top cheek stroke, the bending angle and the back gauge with max. 30 working steps, emergency stop switch with magnetic holder, back gauge with ball screw spindles, CE mark. The bending performance refers to sheets of strength of 400 N / mm². Please notice that the price of a new CNC-machine in this  ...

sheet width: 2.100 mm plate thickness: 3 mm distance between columns: 2.100 mm weight of the machine ca.: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mm plate thickness: 5,00 mm distance between columns: mm upper beam stroke: 350 mm stroke bending beam: 80 mm total power requirement: kW weight of the machine ca.: 7,50 t dimensions of the machine ca.: 4,20 x 2,90 x 2,30 m Furnishing - Upper beam stroke: 350mm - Motorized folding beam adjustment - controlled backgauge 1000mm (1500mm with repositioning) - Control Fm100 - Geissfusssatz divided height approx. 130mm - Sharp rail 45 ° - Bending bar: 15mm, 20mm + reinforcement bar 35mm - Radius rail R16mm, length 2000mm - Radius rail R30mm, length 1000mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.