Category: 502 presses / Baling presses
Latest update: 22.03.2024 add to watchlist
approved
dealer
item-No.: 162436911
New in: 2009

used

check Seller: RDA Recycling Machinery GmbH
Location: Land-de

add to watchlist

Europress EP 6500 V5 H4, pressing force 120 t, year of construction 2009, drive power 75 kW, only 15,334 operating hours, overhauled Specifications: Manafacture: Europress Type 6500 V5 H4 Year of construction: 2009 Operating hours 15,334 hours, as of January Number of pressed bales 138,097 bales, as of January Pressing force main press 120 t Specific pressing force 142 kg/cm² Dimensions insertion chute 1,650 x 1,100 mm Filling volume 3 m³ Filling volume / pressing cycle 1.58 m³ Bale dimensions 730 x 1,100 Length variable Drive power 75 kW (1 x 30 kW + 1 x 45 kW, individually switchable) Total connected load 83 kW Current consumption 150 A Binding 5-fold vertical, 4-fold horizontal, fully automatic Bale weights 450 to 900 kg, depending on bale length and material Hydraulic oil tank volume 1,200 L PLC control (manuf., type) Siemens S7-200 Control Panel (Manufactur ...

Category: 502 presses / Industrial baling presses
Latest update: 23.01.2024 add to watchlist
approved
dealer
item-No.: 162936618
New in: 2017

used

Location: Land-de

add to watchlist

The opportunity! As good as new pre-press flap press with cross binding Hydraulic master cylinder resealed! With security key system! Fully functional, every service performed, still in operation, without a conveyor belt! Viewing possible at short notice by appointment! Subject to prior sale! Purchase including dismantling and loading

Category: 502 presses / Baling presses
Latest update: 25.03.2024 add to watchlist
approved
dealer
item-No.: 162210578
New in: 2015

used

check Seller: OBM Recycling Machinery B.V.
Location: DE Land-de

add to watchlist

Technical data baler: Manufacturer Europress Umwelttechnik GmbH, Germany Type EP5 150 V5 Year of construction 2015 Operating hours 19,173 hours Number of pressed bales 282,961 bales Number of press strokes from the press ram 1,895,112 press strokes Pressing force of main press 150 t Specific pressing force 181.8 N/cm² Dimensions of feed chute 1,000 x 2,000 mm (w x l) Bale dimensions 750 x 1,100 mm (h x w), length variable Drive power 2 x 55 kW + 15 kW + 2 x 0.75 kW Rated current 230 A Cable cross-section supply 120 mm² Tying 5-fold vertical, fully automatic Hydraulic oil tank capacity 4,300 l PLC control Siemens S7 / ET200S Transport weight press 35,800 kg Special equipment: Base plates and side walls made of HARDOX steel Free tamper in front of the counter blade, with cleaning cycle Scope of delivery: 1 piece baler 1 piece control cabinet 1 set of oil collecting pans under the baler 1 ...

Category: 212 peripheral equipment (e.g. heating, conveying, drying)
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162599868
New in: 2001

used

check Seller: Bödeker Holzbearbeitungsmaschinen GmbH
Location: Land-de

add to watchlist

Manufacturer: Europress, Type: 1000 VE, Power kg/h: 35 m³/h, Supply case m³: 0,53, Hydraulikal power kW: 5,5, Ballenpresse: yes, Pressdruck kN/ to: 300, Einfüllöffnung b x h x L mm: 700 673, Ballenmass b mm x l mm x h mm : 500 x 650, Ballengewicht kg: 50 - 200, Year :2001

Category: 106 presses / Balling Presses
Latest update: 25.03.2024 add to watchlist
approved
dealer
item-No.: 158124477

new

check Seller: Diebels Recyclingmaschinen
Location: Land-de

add to watchlist

Dear Sir or Madam, We have in the offer for you The Tiger metal and scrap press.These are available with different press box dimensions and Bale dimensions (25 x 25, 30 x 30, 40 x 40). Cutting edges on all three sides of the box give the machine the ability to handle oversized materials. The machine is equipped with side pre-loading box, oil cooler and radio remote control. (further equipment possible) Out of stock. If you have any questions, please do not hesitate to contact us. To make an offer, we need your company data and a direct e-mail address.

Category: 109 other metal working machines
Latest update: 12.02.2024 add to watchlist
approved
dealer
item-No.: 110129
New in: 2000

used

check Seller: Helmut Steinfels GmbH & Co. KG
Location: Hamburg Land-de

add to watchlist

We can offer you all types of Wafios nail machines from S25 - N90

Category: 109 other metal working machines
Latest update: 12.02.2024 add to watchlist
approved
dealer
item-No.: 177815
New in: 2000

used

check Seller: Helmut Steinfels GmbH & Co. KG
Location: Hamburg Land-de

add to watchlist

We can offer you all types of Wafios nail machines from S25 - N90

Category: 1200 machines and plants for process engineering / Presses
Latest update: 04.03.2024 add to watchlist
approved
dealer
item-No.: 312990

used

check Seller: Perry Machinery Poland
Location: Land-pl

add to watchlist

Stock number: UG5830 Used chamber filter press by FILTRI DIEMME model GIGANTE 1500. Frame type 1500 mm x 1500 mm /90. Press has 85 pp plates with bottom feeding inlet. Filtration surface about 321 m2. Press is equipped with control panel, Willet sludge pump designed for work on pressure 10 bar, polymer dosing system, cake washing system, photocell safety system. Plates designed for work on pressure up to 15 bar. Closing pressure 385 bar. Dimensions: length 10 m x width 2 m x height 2 m. Reported output up to 30 m3 of sludge per hour.

Category: 1300 other machines and plants
Latest update: 02.05.2023 add to watchlist
approved
dealer
item-No.: 119631149

used

Location: Land-at

add to watchlist

with rotary tower for sieve-edge presses (except EBP350) For cleaning and grinding fruit. The pre-washing system is an absolute must for the hygienic processing of fruit. Thanks to the built-in ratz mill with interchangeable sieves, you get the ideal mash consistency for the respective pressing method. Technical data: Rated power up to 6 000 kg/h Power: Elevator 2.2 (3.0) kW (PS) Mill 5.5 (7.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 750 mm Width 870 mm Height 2 700 mm Delivery or insertion height 800 mm Weight 420 / 450 kg Material 1.4301 / AISI 304 Connections: Connection for cleaning 1/2" inside Connection for washing container 2" outside Height mash ejection 1 730 mm / with transition 1 510 mm can be used for core fruit Scope of delivery 7, 9 and 12 mm cutting sieve

Category: 106 presses
Latest update: 09.10.2023 add to watchlist
approved
dealer
item-No.: 123413701
New in: 1980

used

check Seller: AUER
Location: Land-at

add to watchlist

; in order

Category: 106 presses
Latest update: 09.10.2023 add to watchlist
approved
dealer
item-No.: 123413845

used

check Seller: AUER
Location: A - Oberösterreich Land-at

add to watchlist

; in order

Category: 106 presses / Open Gap Eccentric Presses
Latest update: 08.01.2024 add to watchlist
approved
dealer
item-No.: 12792960
New in: 1972

used

check Seller: Kurt Steiger Werkzeugmaschinen GmbH
Location: Wiesbaden Land-de

add to watchlist

Force of pressure: 75 t projection: 300 mm table size: 620 x 800 mm Durchfalloch in the table: 225 x 325 mm table adjustment: 175 mm plunger surface: 180 x 475 mm slide adjustment: 80 mm stroke adjustment: 16-140 mm stroke rate: 90 / min drive motor: 380 V, 3 kW space: 1700 x 1200 x 2500 mm weight: 3300 kg

Category: 106 presses / High Speed Presses
Latest update: 08.01.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 12793088
New in: 1979

used

check Seller: Kurt Steiger Werkzeugmaschinen GmbH
Location: Wiesbaden Land-de

add to watchlist

Force of pressure: 63 t table size: 610 x 800 mm throat depth: 350 mm stroke: 200 mm Electr. Supply: 380 V, 15 kW space: 1800 x 920 x 2440 mm weight: 3940 kg

Category: 106 presses / Open Gap Eccentric Presses
Latest update: 08.01.2024 add to watchlist
approved
dealer
item-No.: 12792982

used

check Seller: Kurt Steiger Werkzeugmaschinen GmbH
Location: Wiesbaden Land-de

add to watchlist

Force of pressure: 40 t projection: 250 mm table size: 440 x 530 mm Durchfalloch in the table: 170 Ø mm table adjustment: 220 mm plunger surface: 200 x 280 mm slide adjustment: 60 mm stroke adjustment: 8-80 mm stroke rate: 100 / min drive motor: 380 V, 2.5 kW space: 950 x 1450 x 2050 mm weight: 2400 kg

Category: 106 presses / Eccentric Presses
Latest update: 02.01.2024 add to watchlist
approved
dealer
item-No.: 13189002

used

Location: Land-nl

add to watchlist

Capacity: 50 ton Projection: 225 mm Stroke: 320 p/min Large table: 500 x 800 mm

Category: 106 presses / Crank Presses
Latest update: 19.12.2023 add to watchlist
approved
dealer
item-No.: 146156155
New in: 1988

used

check Seller: ERS MANAGEMENT LTD
Location: Land-ua

add to watchlist

Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250 mm -Force of pushing out ton-force: 25 -Force of a clip ton-force: 250 Press overall dimensions: 4670x4670x8110 mm Press weight: 140 tons

Category: 106 presses / Die Spotting Presses
Latest update: 08.01.2024 add to watchlist
approved
dealer
item-No.: 12793226
New in: 1973

used

check Seller: Kurt Steiger Werkzeugmaschinen GmbH
Location: Wiesbaden Land-de

add to watchlist

Pressing force: 40 t table size: 670 x 470 mm plunger surface: 670 x 470 mm clearance between the pillars: 620/470 mm gr. Height: 740 mm Preß speed: 20 mm / s rapid traverse: 50 mm ejector force: 3T Electr. Supply: 380 V, 9.5 kW space: 2200 x 1875 x 3000 mm weight: 2400 kg

Category: 106 presses / Workshop Presses
Latest update: 07.12.2023 add to watchlist
approved
dealer
item-No.: 13822572

new

check Seller: Weber Werkzeugmaschinen GbR
Location: Land-de

add to watchlist

Force of pressure: 100 to pass between stand: 915 mm piston stroke: 400 mm piston diameter of 90 mm maximum pressure: 215 bar table width: 590 mm maximum working height: 1300 mm forward speed: 10 mm / sec. Return speed: 14 mm / sec. Power of motor: 3.0 of kW width: 1450 mm depth: 850 mm height: 2400 mm weight approx.: 800 kg

Category: 106 presses / Workshop Presses
Latest update: 04.03.2024 add to watchlist
approved
dealer
item-No.: 13822574

new

check Seller: Weber Werkzeugmaschinen GbR
Location: Land-de

add to watchlist

Force of pressure: 30 to piston stroke: 150 mm table width: 185 mm passage (S): 530 mm bore (F): distance of 140 mm cylinders - table (F1): distance 150 mm cylinder - table (F2): 1030 mm cylinder movable (M): 200 mm width (A): (B depth of 800 mm): 700 mm height 1 (C): 1775 mm height 2 (D): 1805 mm weight: 162 kg

Category: 1200 machines and plants for process engineering / Presses
Latest update: 04.03.2024 add to watchlist
approved
dealer
item-No.: 152006699

used

check Seller: Perry Machinery Poland
Location: 05850 Ozarow Mazowiecki Land-pl

add to watchlist

Stock# U2347-12 Used hydraulic press for removing paste/paint from mixing can. Press consist of carbon steel supporting column with height 399 cm mounted to base with dimensions 700 mm x 700 mm. Pressing head is mounted on cart which is rised and lowered by mechanical hoist which is driven by el. motor 0.37/1.5 kW, 380 V, 50 hz and is able to work up to weight range 2000 kg. Pressing head is designed for work on mixing cans with internal diamater 1100 mm. Top of pressing head is equipped with 6 clamps for mounting it on product container. Stroke of piston about 1150 mm. Piston is poweder from hydraulic device, driven by el motor 0.55 kW. Maximal working pressure up to 150 bar. Last time used in paint industry.

Category: 106 presses / Workshop Presses
Latest update: 04.03.2024 add to watchlist
approved
dealer
item-No.: 13822576

new

check Seller: Weber Werkzeugmaschinen GbR
Location: Land-de

add to watchlist

Force of pressure: 50T piston stroke: 200 mm table width: 260 mm passage (S): 730 mm bore (F): distance 205 mm cylinder - table (F1): distance 75 mm cylinder - table (F2): 1050 mm cylinder movable (M): 240 mm width (A): 1040 mm depth (B): 800 mm height 1 (C): 1835 mm height 2 (D): 1880 mm weight approx.: 287 kg

Category: 106 presses / Pneumatic Bench-Type Presses
Latest update: 23.03.2024 add to watchlist
approved
dealer
item-No.: 19201031

used

check Seller: Reitz Technik GmbH
Location: Biebergemünd Land-de

add to watchlist

Pneumatic press with foot-tripping

Category: 106 presses / Pneumatic Bench-Type Presses
Latest update: 23.03.2024 add to watchlist
approved
dealer
item-No.: 19201029

used

check Seller: Reitz Technik GmbH
Location: Biebergemünd Land-de

add to watchlist

Pneumatic press 2643 Assembly through pivot table outside the working area With protective cage and release only with a retracted swing table Table size: 10 cm x 10 cm

Category: 206 presses / Edge presses
Latest update: 20.03.2024 add to watchlist
approved
dealer
item-No.: 19327672

used

check Seller: WEIBERT maschinen
Location: Land-de
Price: 450 € add to watchlist

STEGHERR 2, 5 m Edge press 2, 5 m length on one side from the bottom with edge - preheating rail Driving device Space requirement approx. L = 2900 B = 600 H = 900mm G &-2789

Category: 502 presses / Baling presses
Latest update: 25.10.2023 add to watchlist
approved
dealer
item-No.: 157865144
New in: 1999

used

check Seller: Brauner Recyclingtech GmbH
Location: Land-de

add to watchlist

automatic baler Manufacturer: PAAL Type: KONTI 275 D/k Year of construction 1999 specifications: Pressing force: 75 t Specific pressing force: 9.09 kg/cm² Channel format: 750 x 1,100 mm Bale weight: 500 - 750 kg, depending on material and bale length Filling opening: 1,550 x 1,020 mm Drive power: 75 kW Throughput: 350 m³/h Pressing capacity: - approx. 12.0 t/h at department store (35 kg/m³ bulk density) - approx. 21.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 33.0 t/h for collected goods (100 kg/m³ bulk density) Binding: 4-fold vertical + 3-fold horizontal Machine weight: approx. 25.0 t

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
RESALE used machinery 25 years online