We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
20x 800 ltr. VA2 transport tank, used, round standing, stackable, dome top 400 mm, residual outlet with disc valve NW 80, operating pressure 2 bar, test overpressure 3.4 bar, overpressure valve in the lid, pressure resistant for e.g. overlay with CO2 or CO2 impregnation, weight/h: 130 kg, cleaned inside, pressure-tested, very stable design, diameter: 1 m, H: 1.60 m, Price/pc: 940,- â?¬ plus VAT from dolgesheim warehouse
used
Cat No. 14-00221 Eurolux Storage and Transport Tank Cubic - 750 Litres in AISI 304 stackable – NEW Multi-functional Tanks - pressureless Material: V2A - AISI 304, 1.4301, Material Thickness: Tank Body: 1,5 mm - Feet: 2,5 mm – transport lugs: 2, 5 mm Surface: inside: IIID, outside marbled Upper Body: Manhole Lid DN 400 with 4 Screws with clamp Thread Connection DN 50 Tank Corner Reinforcement 150 mm / 150 mm Lower Body: with Conical Bottom (Outlet DN 65) with Forklift Shoes. Can be accessed from all sides with a Forklift/Truck Pallet Measurements and Weight: Height body tank: 800 mm Total Height: 1380 mm Outer Dimensions: 800 x 1200 mm Weight: 110 kg All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karl ...
used
12 x 14.800 ltr. VA4 completely Pasteurization tank, Holvrieka, round, used standing on feet, it will be only the lower tanks sold, ø 2.48 m, H: 3,80 m (2 St. 7.60 m), incl. all armatures and pressure valves (excluding pressure relief valve), operating pressure: 1.5 bar, ZIP able, dished, adjustable feet, very good condition, the tanks can be sold separately 20 x 10.200 ltr. VA4 completely Pasteurization tank, Holvrieka, used, round standing on feet, stacked per 2 PCs ø 2,10 m, H zs.: 7,40 m, incl. all armatures and pressure valves (excluding pressure relief valve), operating pressure: 1.5 bar, ZIP able, dished, adjustable feet, very good condition, the tanks can be sold separately 36 x 5.000 ltr. VA4 completely Pasteurization tank, Holvrieka, used, round standing on feet, stacked per 2 PCs ø 1.50 m, H zs.: 7 m, incl. all armatures and pressure valves (excluding pr ...
used
Manufacturer: Hinke Model: ATS Sudmo Capacity: 6400 l Pressure tank up to 5 bar
used
Producer: Bolz Producer: Sinks Allgau Capacity: 500 l The tank is equipped with 2 probes to measure the filling level.
used
Producer: H & K Model: CIP system Capacity: 1500 l Year of construction: 1983 The tank is equipped with a liquid manometer.
used
Preparation of crystal sugar We can offer you a complete system for dissolving and pasteurizing crystalline sugarThe device includes:-Pasteurizer KZE , producer: Schmidt, year: 1997 3-reservoir, double coat (heating-cooling) capacity of one tank: 800 l.dimensions: the height of the tank: 1100 mm, diameter: 1400 mm, total height: 2200 mm
used
20,000 liters tank with thermal insulation not used tanks
used
1 cool- and heatable, sterilizable, vacuum-resistant stainless steel process tank for the production of dairy, delicatessen, pharmaceutical and cosmetic products Manufacturer: Seitz-Werke, GmbH Type: DB 170. FW Machine. No.: 2226 Content: 187 litres Material: stainless steel V4A / 1.4571 Product-contacted parts polished Product room: pressure-resistant to 3 bar Double jacket for heating and cooling Double jacket: 35.5 litres, pressure-resistant to 2 bar Operating temperature: up to 133 C Ventilation and vent valve Rise tube Pointer thermometer from 0 - 160 C Pressure gauge Safety valve Filling opening NW 60 Bottom seat valve NW 20 Agitator flange available Operating instructions + list of spare parts, etc. Dimensions: approx. 0.8 x 1.4 m Weight: approx. 200 kg Technical condition: used, excellent as good as new operating condition
used
12,000 litres of mash agitator tanks with lateral agitator from V2A available: 5 pieces Dimensions: Ges. Height: approx. 3800 mm Zyl. Height: approx. 2150 mm Diameter: approx. 2350 mm Material: V2A - AISI 304, 1.4404 Surface: Inner IIID, outside 2B=IIIC Topsoil: - With cone bottom - With threaded fittings see photos Cylinder bottom: - with agitator mixer 1.1 kW on the side - with manhole 330 x 430 mm - with threaded nozzle DN 25 - with diving sleeve - with threaded nozzle DN 50 rear Underbody: - with pointed cone bottom - with 3 feet with calottes, height adjustable - with forward-drawn outlet DN 65
used
Two stainless steel tanks with drain. About 1500 l individual was sold
used
Storage tank 1,700 liters Standing from V2A dimensions: Ges.Height: 3600 mm Cyl.Height: 3200 mm Diameter: 850 mm material: V2A – AISI 304, 1.4301 surface: Marbled outside cylinder: With threaded nozzles in the middle top DN100 With ladder hook With manhole 400 x 300 mm With threaded nozzle DN65 With residual drain DN80 subsoil: Also stands steel construction with 4 feet
used
Stainless steel container standing 6,000 liters, insulation - 1 x yes, 1 x no; Approximate dimensions: diameter: 1,850 mm, total height incl. feet: 3,300 mm, height feet: 700 mm, height container 2,300 mm without cone Use so far: lye or acid
used
- 3 fermentation tanks, Fabr. Kaspar Schulz, with á 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tanks, coolable over 1 frame cooling zone, with manhole in the frame below and hefeluke in the frame above, with cleaning line, sampler, spout, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tank, coolable via 1 frame cooling zone, with manhole in the frame below and sight glass in the frame above, with cleaning line, sampler, outlet, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled.
used
- 2 fermentation tanks, Fabr. Kaspar Schulz, with á 5.005 lt. content, pressureless, standing, in VA, flat bottom tanks, coolable over 2 Frame cooling zones, with manhole in the frame below and sight glass in the frame above, with cleaning line, Sampler, outlet, conductor bracket, YOC 1997 and 1999, Ø: 1,800 mm, H: 2,650 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 5,016 lt. capacity, 0.9 bar, standing, in VA, flat bottom tank, coolable over 2 Frame cooling zones and 1 floor cooling zone, with manhole in the frame below and sight glass in the frame above, with Cleaning line, sampler, spout, ladder bracket, built in 1992, already dismantled.
used
Wheat beer fermentation tank, Fabr. Schulz, with 55.02 hl content, standing on calotte feet, in stainless steel, coolable over 2 cooling zones in the frame, with manhole in the lower half and hefeluke with visible glass in the upper half, with spray head, pulled down cleaning line, floor display via hose and measuring rod, with sampler, ladder bracket, with spout, built in 1996
used
- 1x 5.055 lt. storage tank, Fabr. Kaspar Schulz, 0.0 bar, flat-bottom tank, standing, in VA, with pulled down Cleaning line, sight glass above, manhole in the lower frame, ladder bracket, YOC 1994. - 2x 6,326 lt. storage tanks, Fabr. Kaspar Schulz, 0.9 bar, Klöpperbodentanks, standing, in VA, with pulled down Cleaning line, manhole in the lower frame, sampler, YOC 1989, - 1x 8,022 lt. storage tank, Fabr. Kaspar Schulz, 0.9 bar, Klöpperbodentank, standing, in VA, with pulled down Cleaning line, manhole in the lower frame, YOC 1989.
used
Stainless steel container, transport container 250 liters Content: 250 Ltr. Working pressure: 0.9 bar, according to type plate, without papers, test pressure 2.0 bar Material: Stainless steel, 1.4301 Design: round, standing, on 4 feet, with welded construction for use by forklift or pallet truck, Outlet with disc valve DN 50, in the upper lid DN 125, 1 x safety valve, 2 x quick coupling connection for CO², Total weight 57 kg last use: Food Height: approx. 1,515 mm Diameter: approx. 625 mm
used
For sale: - vertical tanks with a capacity of 35,000 liters and 30,000 liters. - tanks dismantled
used
2 pieces of lying fermentation tanks, Fabr. Gresser, lying in storage saddle: each 6,550 lt capacity, 0.0 bar, coolable via half-tube coils in the cylinder Manhole in the front floor Spout Sampler Cleaning line Ø: ~1,900 mm, L: ~3,400 mm.
used
Process tank -crystallizer. Capacity: 8 m3 Cooling / heating jacket thermal insulation stirrer
used
Technical data: V- 36 hl, 1.5 bar, stainless steel producer: Steinecker / Germany volume: 3.6 m3 pressure: 1.5 bar two cooling zones with chilled water propeller stirrer drive
used
1 of used CCT Cylindro Conical Tank / DPV Dual Purpose vessel, manufactured by Staes of Belgium, vertical cylindrical conical stainless steel vessel mounted on four legs. Overall height approx. 5.162 mm, OD 2.000 mm, ID 1.850 mm, 6.500 liters working / fermenting capacity (approx. 8.000 liters brim full), SWP 3 Bar, CE and PED compliant. Top and side entry manway, C.I.P Pipe and a selection of valves and fittings. 9 available (3 of which with top and side entry manway, and 6 with side manway only).
used
BATCH TYPE PASTEURIZATION TANK SUITABLE FOR HEATING AND COOLING TYPE: Jacketed and insulated tank CAPACITY: 1.000 l/h milk INCLUDING: Paddle mixer with motor and reductor, thermomter and manhole. Batch pasteurizer tank for milk, juice, dairy products....etc They are heated by steam, pressure max. 2 BAR. ( they are jackated and insulated ) Outer dimensions are as below; Diameter: 130 cm Height: 160 cm The motor power of the mixer is 0,75 kW. There is a thermometer mounted on the top to see the product temperature. There is a CIP ball mounted on top inside in order to clean the tank. There are side plates to prevent vortex inside. 2 PCS AVAILABLE
used
Qty. 1 Second-hand vertical fermentation tanks Mfc.: Holvrieka, Schmidding, Ellinghaus Built: 1991, 1996 Capacity: 24 x 1450 hl & 4 x 237 hl N° Name Producer Year Data Comments 1 Fermentation tanks Holvrieka 1991 1450 hl 2 tanks 2 Fermentation tanks Schmidding 1996 1450 hl 16 tanks 3 Fermentation tanks Ellinghaus 1991 1450 hl 6 tanks 4 Fermentation tanks Ellinghaus 1991 237 hl 4 tanks