used ERNST Sheet Metal Deburring Machines

Sheet metal deburring machine Manufacturer: ERNST Type: EM5/N900 Year of construction: 1999 Control type: conventional Working width: 880 mm Workpiece height: 1-70 mm Grinding drum diameter: 420 mm Machine weight approx.: 2,800 kg Dimensions approx.: 2,500 x 1,715 x1,675 mm automatic sheet metal deburring machine working in wet grinding process automatic magnetic filter system Wet sanding device Washing and drying facilities Maglev width: 200 mm Minimum length of small parts: 80 mm

working width: 1380 mm workpiece height: 70 mm : total power requirement: 45 kW weight of the machine ca.: 5.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width:1400 mm Workpiece thickness max.: 80 mm work height max.:1000 mm Feed speed:4m/min I Stufe, 8 II Stuf m/min. Required air-pressure:max. 5 bar voltage:50 Hz, 380 V workpiece length:320 mm workpiece thickness min.:1 mm weight of the machine ca.:3500 kg Documents:vorhanden

working width:880 mm workpiece height:1- 70 mm work height max.:1000 mm Feed speed:4- 8 m/min. voltage:50 Hz, 400 V weight of the machine ca.:2.800 kg dimensions of the machine ca.:2500 x 1715 x1675 mm width:min. 350 mm Sanding cylinder diameter:420 mm electr. connected load:20 KW Required air-pressure:1 x R3/ 8 " pressure:5 bar tank:des Bandfilter ca.200 l automatic magnetic filter unit:vorhanden grinding tools:1540 x 900 mm accessories::9 Bänder Documents:vorhanden

ERNST EG3M deburring machine was built in 1988 in Germany. The surface machining of workpieces with a maximum thickness of 70 mm is performed “dry” by means of a burr-removing sanding roller installed in the machine and two brush rollers moving in the opposite direction intended for edge rounding. To prevent the workpiece from being drawn into the centre of the ERNST EG 3 M deburring machine, the sheet to be deburred is pressed onto the conveyor belt via a driven roller on slack bearings. The ERNST EG 3/M 1400 automatic deburring machine also allows the use of a magnetic belt to process smaller workpieces. The total weight of the deburring machine is 3500 kg. Technical data of the ERNST EG3M deburring machine - maximum workpiece thickness: 70 mm - minimum workpiece thickness: 1 mm - minimum workpiece length: 350 mm - minimum workpiece length on magnetic band: 80 mm - minimum  ...

Deburring machine Ernst Neptun Deburring machine was little used

This ERNST EM5N II/L Deburring machine was manufactured in the year 2007.

Compressed air supply: 5bar, connected load: 45kW, operational hours counter: 21,712h.

Compressed air supply: 5bar, connected load: 45kW, operational hours counter: 21,712h.

Compressed air supply: 5bar, connected load: 45kW, operational hours counter: 21,712h.

Compressed air supply: 5bar, connected load: 45kW, operational hours counter: 21,712h.

Compressed air supply: 5bar, connected load: 45kW, operational hours counter: 21,712h.

Compressed air supply: 5bar, connected load: 45kW, operational hours counter: 21,712h.

> Product DetaW Automatic strapping machine ERNST JÄGER Model: JU-200E /12mm High-quality stainless steel table top with recessed castors Mobile on castors (2 with brake) Belt tension electronic, individually adjustable Automatic remnant belt ejection Fully automatic strip threading electronics Includes foot control (foot pedal) Manufacturer: Minimum dimensions of packaged goods: W130 x H20 mm Temple opening: H600 x W850 mm Max. packaged goods: 100 kg Working height: 810 mm Strapping performance: up to 29/minute Strapping width: 12 mm Strapping thickness: 0.55 - 0.75mm Roller core: 200 mm Belt tension: 7 - 50 kg Machine dimensions: W1430 x D620 x H1540 mm Machine weight: 220 kg Noise level: 83 db (A) Connected load: 230 V, 50 Hz, 1.2 kW, 9A Year of construction 2019/09 Function tested, machine ready for immedia ...

> Product DetaW Automatic strapping machine ERNST JÄGER Model: JU-200 TP High-quality stainless steel table top with recessed castors Mobile on castors Belt tension electronic, individually adjustable Automatic remnant belt ejection Fully automatic strip threading electronics Manufacturer: Minimum dimensions of packaged goods: W130 x H20 mm Temple opening: H600 x W850 mm Max. packaged goods: 100 kg Working height: 810 mm Strapping performance: up to 29/minute Strapping width: 12 mm Strapping thickness: 0.55 - 0.75mm Roller core: 200 mm Belt tension: 7 - 50 kg Machine dimensions: W1430 x D620 x H1540 mm Machine weight: 220 kg Noise level: 83 db (A) Connected load: 230 V, 50 Hz, 1.2 kW, 9A Year of construction 2011 Function tested, machine ready for immediate use Condition see original pictures! If you have an ...

> Product DetaW Automatic strapping machine ERNST JÄGER Model: JU-200 TP High-quality stainless steel table top with recessed castors Mobile on castors Belt tension electronic, individually adjustable Automatic remnant belt ejection Fully automatic strip threading electronics Manufacturer: Minimum dimensions of packaged goods: W130 x H20 mm Temple opening: H600 x W850 mm Max. packaged goods: 100 kg Working height: 810 mm Strapping performance: up to 29/minute Strapping width: 12 mm Strapping thickness: 0.55 - 0.75mm Roller core: 200 mm Belt tension: 7 - 50 kg Machine dimensions: W1430 x D620 x H1540 mm Machine weight: 220 kg Noise level: 83 db (A) Connected load: 230 V, 50 Hz, 1.2 kW, 9A Year of construction 2011 Function tested, machine ready for immediate use Condition see original pictures! If you have an ...

> Product DetaW Automatic strapping machine ERNST JÄGER Model: JU-200 TP High-quality stainless steel table top with recessed castors Mobile on castors Belt tension electronic, individually adjustable Automatic remnant belt ejection Fully automatic strip threading electronics Manufacturer: Minimum dimensions of packaged goods: W130 x H20 mm Temple opening: H600 x W850 mm Max. packaged goods: 100 kg Working height: 810 mm Strapping performance: up to 29/minute Strapping width: 12 mm Strapping thickness: 0.55 - 0.75mm Roller core: 200 mm Belt tension: 7 - 50 kg Machine dimensions: W1430 x D620 x H1540 mm Machine weight: 220 kg Noise level: 83 db (A) Connected load: 230 V, 50 Hz, 1.2 kW, 9A Year of construction 2011 Function tested, machine ready for immediate use Condition see original pictures! If you have an ...

> Product DetaW Automatic strapping machine ERNST JÄGER Model: JU-200 TP High-quality stainless steel table top with recessed castors Mobile on castors Belt tension electronic, individually adjustable Automatic remnant belt ejection Fully automatic strip threading electronics Manufacturer: Minimum dimensions of packaged goods: W130 x H20 mm Temple opening: H600 x W850 mm Max. packaged goods: 100 kg Working height: 810 mm Strapping performance: up to 29/minute Strapping width: 12 mm Strapping thickness: 0.55 - 0.75mm Roller core: 200 mm Belt tension: 7 - 50 kg Machine dimensions: W1430 x D620 x H1540 mm Machine weight: 220 kg Noise level: 83 db (A) Connected load: 230 V, 50 Hz, 1.2 kW, 9A Year of construction 2011 Function tested, machine ready for immediate use Condition see original pictures! If you have an ...

> Product DetaW Automatic strapping machine ERNST JÄGER Model: JU-200 TP High-quality stainless steel table top with recessed castors Mobile on castors Belt tension electronic, individually adjustable Automatic remnant belt ejection Fully automatic strip threading electronics Manufacturer: Minimum dimensions of packaged goods: W130 x H20 mm Temple opening: H600 x W850 mm Max. packaged goods: 100 kg Working height: 810 mm Strapping performance: up to 29/minute Strapping width: 12 mm Strapping thickness: 0.55 - 0.75mm Roller core: 200 mm Belt tension: 7 - 50 kg Machine dimensions: W1430 x D620 x H1540 mm Machine weight: 220 kg Noise level: 83 db (A) Connected load: 230 V, 50 Hz, 1.2 kW, 9A Year of construction 2011 Function tested, machine ready for immediate use Condition see original pictures! If you have an ...

> Product DetaW Automatic strapping machine ERNST JÄGER Model: JU-200 TP High-quality stainless steel table top with recessed castors Mobile on castors Belt tension electronic, individually adjustable Automatic remnant belt ejection Fully automatic strip threading electronics Manufacturer: Minimum dimensions of packaged goods: W130 x H20 mm Temple opening: H600 x W850 mm Max. packaged goods: 100 kg Working height: 810 mm Strapping performance: up to 29/minute Strapping width: 12 mm Strapping thickness: 0.55 - 0.75mm Roller core: 200 mm Belt tension: 7 - 50 kg Machine dimensions: W1430 x D620 x H1540 mm Machine weight: 220 kg Noise level: 83 db (A) Connected load: 230 V, 50 Hz, 1.2 kW, 9A Year of construction 2011 Function tested, machine ready for immediate use Condition see original pictures! If you have an ...

> Product DetaW Automatic strapping machine ERNST JÄGER Model: JU-200 TP High-quality stainless steel table top with recessed castors Mobile on castors Belt tension electronic, individually adjustable Automatic remnant belt ejection Fully automatic strip threading electronics Manufacturer: Minimum dimensions of packaged goods: W130 x H20 mm Temple opening: H600 x W850 mm Max. packaged goods: 100 kg Working height: 810 mm Strapping performance: up to 29/minute Strapping width: 12 mm Strapping thickness: 0.55 - 0.75mm Roller core: 200 mm Belt tension: 7 - 50 kg Machine dimensions: W1430 x D620 x H1540 mm Machine weight: 220 kg Noise level: 83 db (A) Connected load: 230 V, 50 Hz, 1.2 kW, 9A Year of construction 2011 Function tested, machine ready for immediate use Condition see original pictures! If you have an ...

> Product DetaW Automatic strapping machine ERNST JÄGER Model: JU-200 TP High-quality stainless steel table top with recessed castors Mobile on castors Belt tension electronic, individually adjustable Automatic remnant belt ejection Fully automatic strip threading electronics Manufacturer: Minimum dimensions of packaged goods: W130 x H20 mm Temple opening: H600 x W850 mm Max. packaged goods: 100 kg Working height: 810 mm Strapping performance: up to 29/minute Strapping width: 12 mm Strapping thickness: 0.55 - 0.75mm Roller core: 200 mm Belt tension: 7 - 50 kg Machine dimensions: W1430 x D620 x H1540 mm Machine weight: 220 kg Noise level: 83 db (A) Connected load: 230 V, 50 Hz, 1.2 kW, 9A Year of construction 2011 Function tested, machine ready for immediate use Condition see original pictures! If you have an ...

> Product DetaW Automatic strapping machine ERNST JÄGER Model: JU-200 TP High-quality stainless steel table top with recessed castors Mobile on castors Belt tension electronic, individually adjustable Automatic remnant belt ejection Fully automatic strip threading electronics Manufacturer: Minimum dimensions of packaged goods: W130 x H20 mm Temple opening: H600 x W850 mm Max. packaged goods: 100 kg Working height: 810 mm Strapping performance: up to 29/minute Strapping width: 12 mm Strapping thickness: 0.55 - 0.75mm Roller core: 200 mm Belt tension: 7 - 50 kg Machine dimensions: W1430 x D620 x H1540 mm Machine weight: 220 kg Noise level: 83 db (A) Connected load: 230 V, 50 Hz, 1.2 kW, 9A Year of construction 2011 Function tested, machine ready for immediate use Condition see original pictures! If you have an ...

> Product DetaW Automatic strapping machine ERNST JÄGER Model: JU-200 TP High-quality stainless steel table top with recessed castors Mobile on castors Belt tension electronic, individually adjustable Automatic remnant belt ejection Fully automatic strip threading electronics Manufacturer: Minimum dimensions of packaged goods: W130 x H20 mm Temple opening: H600 x W850 mm Max. packaged goods: 100 kg Working height: 810 mm Strapping performance: up to 29/minute Strapping width: 12 mm Strapping thickness: 0.55 - 0.75mm Roller core: 200 mm Belt tension: 7 - 50 kg Machine dimensions: W1430 x D620 x H1540 mm Machine weight: 220 kg Noise level: 83 db (A) Connected load: 230 V, 50 Hz, 1.2 kW, 9A Year of construction 2011 Function tested, machine ready for immediate use Condition see original pictures! If you have an ...

> Product DetaW Automatic strapping machine ERNST JÄGER Model: JU-200 TP High-quality stainless steel table top with recessed castors Mobile on castors Belt tension electronic, individually adjustable Automatic remnant belt ejection Fully automatic strip threading electronics Manufacturer: Minimum dimensions of packaged goods: W130 x H20 mm Temple opening: H600 x W850 mm Max. packaged goods: 100 kg Working height: 810 mm Strapping performance: up to 29/minute Strapping width: 12 mm Strapping thickness: 0.55 - 0.75mm Roller core: 200 mm Belt tension: 7 - 50 kg Machine dimensions: W1430 x D620 x H1540 mm Machine weight: 220 kg Noise level: 83 db (A) Connected load: 230 V, 50 Hz, 1.2 kW, 9A Year of construction 2011 Function tested, machine ready for immediate use Condition see original pictures! If you have an ...