We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Retrofitted in 2005 electrical / CNC control Siemens 840 d Retrofitted in 2012 and 2019 mechanical what made. Technical datas: Rotary spindle speed: 1.25-600 tr/min Spindle maximum power: 55 kW 215 tr/min Horizontal run of the upright on the bench - X 15,000/30,000 mm *. * X travel 30,000 mm is for both machine Vertical stroke of carriage on upright - Y (mm) 5,600 mm Spindle stroke - 1,100 mm Z: Flowing stroke - w: 1,100 mm Advance - X: 3-5000 mm / min Feed - Y: 3-5000 mm / min Feedrate - Z: 1.5 2,500 mm / min Total weight: 100,000 kg Foundation pit OSTEO. for both machine Length x width x height: 40,000 x 5,000 x 1,800 mm all accessories are available and can be sold at extra costs. For both machines are the following attachments available: â?¢ Chip conveyor For both machines including lubrication and coolend unit for the cutting operation &a ...
used
Machine details Stock number 1105-03330 Machine type guide and pull spindle lathe Make ERNAULT-SOMUA Type Cholet 550 Year of construction 1990 Control type conventional Storage location FRANCE Country of origin France Delivery time immediately Freight base EX WORK price Technical details Turning diameter over bed 550 mm Turning diameter via support 500 mm Turning length 1100 mm Tip height 250 mm Spindle bore 52 mm Inner cone 136 Spindle speeds 32-1800 rpm Feeds - bed slide / lengthwise 0.05-07 mm/w Feeds flat slide 0.033-0.45 mm/min Total power requirement 13 kW Weight of the machine ca. 2,3 t Space requirement approx. 2870 x 940 x 1400 m Information accessories: PARAT steel holder 4 STUCK 3 bake lining dia 250mm 2 AXIS DIGITAL
used
Spindle size: dia 200 / ISO 70 X travel: 6.000 mm Y travel: 4.500 mm Z travel: 1000 mm W travel: 1.250 mm Spindle speed: 800 RPM Rotary table: - Surface: 3600 x 3600 mm - Travel: 2000 mm
used
Horizontal bed milling machine make ERNAULT SOMUA type Z 1 CFabr. -No: 104470/333, built in 2/1970Table mounting surface: 1200 x 300 mmTable movement lengthwise: 700 mmY: 250 mmZ: 400 mmSpindle taperSpindle speeds Horizontal: 50 - 2500 rpmSpindle speeds Vertictal: 40 - 2000 rpmautomatic feeds f. along u. across the limit switchMotor power spindle approx.: 3 kWexternal dimensionsWeight approx: 1760 kgWith- Additional track control / cam control via connector panel- Coolant deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
dimensions: 3500 x 3000 mm max load: 50 ton longitudinal travel: 2700 mm rated torque of turning motor: 22 mkg circular feed: 0,0006 gt; 0,6 rpm rated torque of longitudinal travel: 9,4 mkg 13 T-slots (width 36 mmnbsp; H7) power: 50 kVa weight: 31 ton
used
Description: Distance between points: 700mm Collection on: 06/05/2024  ,  ,Collection times by arrangement  , IMPORTANT: Collection times may vary if separate collection times are explicitly stated in  ,in the item description weight approx.: 1,400 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 1,000 x 1,700 mm
used
Description: Distance between points: 1200 mm Collection on: 29/04/2024  ,  ,Collection times by arrangement  , IMPORTANT: Collection times may vary if separate collection times are explicitly stated in  ,in the item description weight approx.: 1,900 kg, Approx. Onsite Dimension. (l x w x h): 2,800 x 1,200 x 1,300 mm
used
Description: Longitudinal stroke 710 mm Transverse stroke 250 mm Vertical stroke 400 mm Collection on: 06/05/2024  ,  ,Collection times by arrangement  , IMPORTANT: Collection times may vary if separate collection times are explicitly stated in  ,in the item description Approx. Onsite Dimension. (l x w x h): 2,220 x 1,740 x 2,100 mm, weight approx.: 1,600 kg
used
Description: Longitudinal stroke 710 mm Transverse stroke 250 mm Vertical stroke 400 mm Collection on: 06/05/2024  ,  ,Collection times by arrangement  , IMPORTANT: Collection times may vary if separate collection times are explicitly stated in  ,in the item description Approx. Onsite Dimension. (l x w x h): 2,180 x 1,500 x 1,670 mm, weight approx.: 1,350 kg
used
Lathe H.Ernault 250HN This lathe is brand H. ERNAULT Batignolles type 250HN, it has been used very little, the interpoint is 2m.
used
Machine Details Stock-No. 1105-03882 Type of machine CNC Lathe - Inclined Bed Type Make ERNAULT TOYODA Type HES 52 Year of manufacture 1987 Type of control CNC Storage location FRANCE Country of origin france Delivery time immediately Freight basis EX WORK Technical details turning diameter 650 mm turning length 1100 mm control FANUC 10 T swing over bed 650 mm Spindle Bore 80 mm spindle turning speed range 7 - 4000 rpm transmission ratio 3 Rapid Traverse 12 m/min main drive 37 kW total power requirement 47 kW Weight of the machine approx. 12 t dimensions of the machine ca. 5 x 2.4 x 2. m Additional information * 2-axes CNC-control FANUC 10 T * 1 x 12-station turret VDI 50 programmable tailstock * 3-jaw power chuck diameter 450 mm * swarf conveyor
used
CNC Lathe 2 axes ERNAULT TOYODA HES 52 Travel X: 365 mm Travel Z: 2130 mm Numerical Command: NUM 750 Maxi Ø on bench: 480 mm Maxi Ø over saddle: 400 mm Max machinable length between points: 1983 mm Spindle diameter: Ø 79,5 mm Spindle speed: from 50 to 4000 RPM Turret 12 tools VDI 50 Year of construction: 1990 Motor: 37 kW Tailstock: CM5 Dimensions (L x W x H): 4585 x 3160 x 2550 mm Total length: 6135 mm Weight: 14,5 T
used
Year of construction construction 1983 Drive power Drive power 83 kW Clamping table Clamping table 2500 x 2500 mm workpiece mass on table Workpiece mass 20 t Processing width on table 5770 mm Processing height on table 2800 mm processing depth 1985 mm Spindle diameter Spindle diameter 200 mm Slide cross-section Slide cross-section 530 x 550 mm Additional equipment Angle head large Angle head small
used
Manufacturer/ Make: SKODA Typ/ Type: W200 Year of construction/ year: 1987 X-way: 11500 mm Y-way/ Y-way: 4500 mm Spindle diameter: 200 mm
used
Catalog No. : 5936 Type: W 200 HB Producer: ŠKODA Made in: 1986 Characteristic: Control system: HEIDENHAIN 530 Minimum rotary speed of the spindle: 0.8 1/min Maximum rotary speed of the spindle: 630 1/min X-Axis travels: 16200 mm Y-Axis travels: 5250 mm Z-Axis travels: 1600 mm Taper: ISO 60 Spindle diameter: 200 mm Machine height: 8000 mm Machine length: 20000 mm Machine width: 10000 mm Equipment: Chip convoyer 2008: renovation (new control. wiring and drives)
used
specifications: Spindle diameter 200 mm x-axis: 6000 mm y-axis: 3150 mm z-axis: 2000 mm w-axis 1600 mm Table size: 2000 x 2000 mm Table rotation 360° Tool holder: ISO:50 Spindle speed: 2 - 800 rpm. Equipment / Accessories Digital Rotary table 2000 x 2000 mm Ball screws Clamping platens Carrying sleeve Telescopic cover Angle milling heads Tools & Tool Holders clamping devices, clamping blocks, Tool cabinets with contents Clamping angle etc. The scope of delivery includes a lot of accessories, tools, tool holders, c ...
used
Inv. Num. : 5480 Type: W 160 G Producer: ŠKODA Created: 1978 Parameters: Control System: MEFI Spindle drive power: 55 kW Minimum spindle speed: 2 1/min Maximum spindle speed: 800 1/min Mechanical feed length axis X: 6000 mm Mechanical feed length Y-axis: 2500 mm Mechanical feed length Z-axis: 1250 mm Maximum feed rate X-axis: 3200 mm/min Maximum feed rate Y-axis: 3200 mm/min Maximum feed speed Z-axis: 3200 mm/min Cone: M 100 Spindle diameter: 160 mm Maximum excavation depth: 1600 mm Spindle extension: 1250 mm Base size: 8000 x 5500 mm Travel of the stand on the bed: 6000 mm
used
Inv. Num. : 5480 Type: W 160 G Producer: ŠKODA Created: 1978 Parameters: Control System: MEFI Spindle drive power: 55 kW Minimum spindle speed: 2 1/min Maximum spindle speed: 800 1/min Mechanical feed length axis X: 6000 mm Mechanical feed length Y-axis: 2500 mm Mechanical feed length Z-axis: 1250 mm Maximum feed rate X-axis: 3200 mm/min Maximum feed rate Y-axis: 3200 mm/min Maximum feed speed Z-axis: 3200 mm/min Cone: M 100 Spindle diameter: 160 mm Maximum excavation depth: 1600 mm Spindle extension: 1250 mm Base size: 8000 x 5500 mm Travel of the stand on the bed: 6000 mm
used
Prismatic column drill. Drilling capacity: 60mm. Table: 700x600mm. Vertical travel: 800mm. Taper Morse 4. Speeds: 9. (50-1.084) Motor power: 7,5cv.
used
Prismatic column drill. Ready for automatic drill of flanges, rounds... Drilling capacity: 70mm. Spindle pneumatic work cycle. Indexing table. Chip conveyor. Working area guarding. Year: 1998.
used
Prismatic column drill. Drilling capacity: 30mm. Table: 600x600mm. Speeds: 8. (75-2100) Motor power: 1,65Kw. CE. Year: 2005
used
Prismatic column drill. Drilling capacity: 30mm. Table: 600x600mm. Speeds: 8. (75-2100) Motor power: 1,65Kw. CE. Year: 2005
used
Mixed lot of new and used deep hole drills gemaess list
used
Radial drilling machine. Drlling capacity: 40-50mm. Arm of 1250mm. Taper Morse 5.
used
1 used Tischbohrwerk manufacturer: TOS Type: W75 1998. X-1250mm Y-900mm Z-1000mm W-560mm with 3-axis digital HEIDENHAIN Positip 855