used EMERSON RENWICK Embossing machines

Liebert Emerson M31UA Cooling System Perimeter Cooling for Data Center Environments Cooling capacity: 31 kW Air distribution: Downflow Version: air-cooled Datasheet under this link Item condition: used More items - new and used - can be found in our shop! International shipping costs on request!

Line regulating valve, shut-off valve, ball shut-off valve -Manufacturer: Alco, ball shut-off valve, unused in original packaging -Type: BVE 012/PCN 806734 -Connections: 1/2 ODF -Dimension box: 135/95/H50 mm -Weight: 0.3 kg.

Line regulating valve, shut-off valve, ball shut-off valve -Manufacturer: Alco, ball shut-off valve, unused in original packaging -Type: BVE M10/PCN 806733 -Connection: 10 mm -Dimension box: 135/95/H50 mm -Weight: 0.2 kg

Line regulating valve, shut-off valve, ball shut-off valve -Manufacturer: Alco, ball shut-off valve, unused in original packaging -Type: BVA M12/PCN 015341 -Connection: 12 mm -Dimension box: 220/80/H90 mm -Weight: 0.5 kg

Emerson Network Power Liebert HPC Chiller Manufacturer: Liebert Emerson Network Power HPC chiller Model:SLH206701101210F1 Type: HPC-S 400V/3PH/50HZ+PE Refrigerant circuit: 2 pieces Cooling capacity: 57.3 kW Refrigerant: R407C Compressors: 2 x Danfoss (scroll compressor) Hydraulic module: pump, buffer tank and expansion tank Dimensions: 2150 x 2000 x 1200 mm Weight: 777 kg Compressor: 19.4 FLA, 130 LRA Fan Motor: 2.4 FLA, 8 LRA Pump: 3.9 FLA Total FLA ac: 45 A, 10 KA Date of manufacture: April 2008 FLA (Amperage Under Full Load) LRA (Inrush Current Peak) More items - new and used - can be found in our shop! International shipping costs on request!

Selling Proposal  DESIGNATION REFERENCE QUANTITIES SIEMENS SIMATIC S7-300 PLC 1 SIEMENS SM321 4 I/O BOARD SIEMENS SM322 I/O BOARD 4 FUSE DISCONNECT SWITCH WOHNER LTS-2 3 FUSE DISCONNECT SWITCH WOHNER LTS-000 3 VOLTAGE REGULATOR ROWAN ELETTRONICA 310 S.C/6M 3 EMERSON SP 1406 25 DRIVE EMERSON SP 2401 2 DRIVE

Selling Proposal  DESIGNATION REFERENCE QUANTITIES SIEMENS SIMATIC S7-300 PLC 1 SIEMENS SM321 4 I/O BOARD SIEMENS SM322 I/O BOARD 4 FUSE DISCONNECT SWITCH WOHNER LTS-2 3 FUSE DISCONNECT SWITCH WOHNER LTS-000 3 VOLTAGE REGULATOR ROWAN ELETTRONICA 310 S.C/6M 3 EMERSON SP 1406 25 DRIVE EMERSON SP 2401 2 DRIVE

The small laboratory press MHSP5 can perform very well with the round stamp (70 mm diameter) deformations of many materials. By delivering fine (0.5 mm per wheel revolution), deformations are carried out very accurately. Small punching or stamping operations are possible. The press is driven by a worm gear screw jacks, which requires minimal hand strength by high reduction ratio. The pressing frame consists of stable-dimensioned polyamide PA6G. Here are some technical data:-static force 5 KN (0.5 to) - portable presses frame made of polyamide PA 6 G, very stable design, with FEM program added - spindle manual jacks 20 mm, pitch 5 mm - with Handwheel diameter 120 mm and handle - gear ratio 1:10, per the Handwheel 0.5 mm screw - table size 235 * 195 mm - clearance width 190 mm - stamp size diameter 70 mm with 4 holes 8 mm for mounting a major stamp Very easy operation with spindle and  ...

Electric spindle press REITZ EHSP100F as laboratory heating press / demonstration machine Laboratory heating press with pressing pressure 40 KN (4 tons), ratio 1 : 16, spindle diameter 45 mm, pitch 8 mm, spindle stroke 0.5 mm per revolution. Gear motor 0.75 KW, 1,500 rpm, 4-pole, with spur gear i = 1:5, Speed 150 mm / min. Max dynamic load 25 kN. With reversible control, emergency stop and motor protection plug. Total weight approx. 100 kg, table surface 600 * 600 mm, pressing surface approx. 150 * 250 mm, clear height approx. 60 mm. Base made of high-quality aluminium profiles 45*45 mm, the table top is made of glued plywood top. The laboratory heating press has 40 kN pressing pressure (dynamic load). The spindle is self-locking and thus maintains the pressing force for a longer period of time. For an extra charge with heating plate, insulating plate and tempera ...

Laboratory Press EHSP125 - Demonstration Machine Table press / electric spindle press with pressing pressure 20 KN (2 tons). Press drive with screw jack, reduction ratio 1 : 12, spindle diameter 32 mm, pitch 6 mm, pressing surface approx. 100 * 100 mm, clear height and stroke approx. 300 mm. Gear motor 0.37 KW, 1,390 rpm, 4-pole, with spur gear i = 1 : 5, Speed 150 mm / min. Max dynamic load 20 kN. With reversible control, emergency stop and motor protection plug. Sturdy steel press frame. Base table made of high-quality aluminum profiles 45*45 mm, table surface 600 * 600 mm, table top made of multiplex top. Total weight approx. 100 kg. The table press has 20 kN pressing pressure (dynamic load). Typical applications are pressing work with exact delivery. Suitable for pressing bonding, embossing and impressions. The screw jack has a twist protection so that th ...

Pneumatic toggle press make SCHLING type UNI 3 PNKMachine -No: 3637 Year 1986Press force: 6 tStroke adjustable: 0 - 25 mmOperating pressure: 8 barProjection: 100 mmTable size: 200 x 160 mmDimensions: 300 x 200 x 850 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pneumatic Press Fabr. SMC Cylinder Type CDS 1 WFN 160-150-A51Built in 1987Pressing force: 150 kg = 9.9 kgf / cm²Stroke: 160 mmRam diameter: 50 mmDistance between the side uprights: 360 mmProjection: 150 mmInstallation height: 280 mmOutside dimensions approx: 450 x 350 x 800 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hand lever press make GARANT type 150378Pressing force: 1.0 tRam diameter: 40 mmStroke max. 350 mmDischarge: 260 mmTable diameter: 210 mmOutside dimensions approx: 530 x 200 x 750 mmWith- UnderframeusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pneumatic toggle press make SCHLING type UNI 3 PNKMachine -No: 3657Press force: 6 tStroke adjustable: 0 - 25 mmOperating pressure: 8 barProjection: 100 mmTable size: 200 x 160 mmDimensions: 300 x 200 x 850 mm:UsedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pneumatic toggle press make SCHLING type UNI 3 PNKMasch. -No: 3562Technical specifications:Pressing force: 6.0 tStroke adjustable: 0 - 25 mmOperating pressure: 8.0 barThroat: 100 mmTable size: 200 x 160 mmDimensions: 300 x 200 x 850 mm:usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Data sheet heating press Oropress Pneumatic press 5 KN / 0.5 tons Press stroke 50 mm Adjustment of the clear height with handwheel and spindle, adjustable from 100 to 220 mm. With top heating plate 120 x 100 mm and temperature control, temperature up to 250 °C. Pneumatic two-hand control with triggering via Festo ZSB. Pneumatic sliding table 180 x 220 mm for loading outside the machine. Machine dimensions W = 1100 mm, L = 700 mm, H = 1850 mm Machine weight approx. 300 kg Movable on castors On request for an extra charge with second heating plate and temperature control at the bottom.

Collin Heating Press for Forming Plastics Collin Heating Press 78 Tons for Forming Plastics / Prepregs for Carbon Parts / Composites Type: Press 500 P Plate press for plastics processing / polymeric materials / ceramic masses Pressing pressure approx. 78 tons Temperature range from 20° to 300°C Usable pressing area 496 x 496 mm Voltage: 3 x 400 / 230V Y Power requirement: 3 x 125 A Frequency 50 Hz Power 67 KW Water pressure 4 bar Air pressure 4 bar Hydraulic pressure build-up, Pmax hydraulic: 160 bar Built in 1999 Weight approx. 5 tons Documentation and circuit diagrams available

Electric surface press REITZ EHSP522 Pressing surface 200*200mm Pressure 5 KN / 0.5 tons Suitable for surface bonding of plastics and composites. On request with: - Heating plate and temperature control - Load cells and gauges for use as test press

Fully automatic hot stamping press Oropress Mechanical eccentric press with lift table Lift table as pneumatic sliding table 250 x 250 mm Fully automatic sequence, optionally triggered with foot switch for single stroke Heated press punch 120 x 200 mm up to 250 °C Safety grille Film Feed Unit Built in 1986

in 2005 refurbished Still in operation: Yes Available: immediately

in 2005 general overhauled Still in operation: Yes Available: sofort

Praege machine Hydrualic press NULL for rounds of 35 mm For sale comes from a stock release a used but well preserved fully functional punch or praegepress. Steel rounds were used with this machine. max. round diameter: 35 mm incl. various stamps: A22 / A34 / A41 / A43 / A50 / A60 Drop height: 920 mm with hydraulic unit Machine comes from a warehouse breakdown of a large German industrial group and was accordingly equipped with UVV compliant. Space requirement LxWxH: 1000 x 900 x 1400 mm Weight: 335 kg Price is understood plus VAT free loaded warehouse Giessen Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 6753

Foil stamping - embossing Kolbus Model PA Year 1963 Size of the plate 380 x 450 mm Space between columns 640 mm Pressure 40 tons Condition machine can be bought not working "as-is" or fully refurbished Available direct or 3 month

Max. hydraulic pressure: 400bar.

Max. roll diameter: 500mm, track width: 320mm, speed: 250 prints/min, max. printing width: 300mm, max. printing length: 300mm, including winder and unwinder, without track inspection and edge controls.