We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Emco Emcomat 17S Year of construction: 1999 Center height 140/280 mm Weight 725 kg Dimensions: 1650x 1060 x 1290 Speed 15- 3550 rpm
new
Machine according to DIN 8605: lathe with increased accuracy. Top width: 700 mm Tip height: 170 mm Swing over bed: � 340 mm Swing over cross slide: � 190 mm Bed width: 260 mm Longitudinal slide displacement: 600 mm Cross slide displacement: 220 mm Upper carriage displacement: 110 mm Plan carriage length: 410 mm Plan slide width: 150 mm Bed slide length: 380 mm Turning tool cross section: 20 x 20 mm Distance turning Center - upper carriage: 34 mm Range of the upper carriage (support): 60 / 120 ° Main spindle: Spindle connection DIN 55029 (camlock): S 5 spindle bore: � 50 mm Internal cone according to DIN 7178: 1:22 spindle diameter in front bearing: � 70 mm Maximum Chuck diameter: � 200 mm Faceplate diameter: � 200 mm Spindle speeds: 40-3000 rpm Speed: Stepless mechanical speeds: 4 Main drive: Power at 40% ED: 5,3 kW Maximum no ...
used
Key data: 200
Center height: 200 mm Center distance: 1000 mm Spindle bore: 0 mm Swing over bed Ø: 400mm Swing over cross slide Ø:250mm Spindle bore: 50mm Spindle power: 5kW Tailstock spindle Ø: 50Ø Stroke pinole: 120mm Spindle taper: 3Mk Speeds / ranges: 3000Rpm Length: 1.900 mm Width: 1.000 mm Height: 1.300 mm Weight: 840 kg
used
Center height: 170 mm Center distance: 700 mm Spindle bore: 120 mm MACH-id 5209 MAKE EMCO Austria TYPE EMCOmat EM17 D YOP 1998 SPECIFICATIONS Swing over bed Ø 340 mm Swing over cross slide 190 mm DBC Turning length 700 mm Spindle bore 50 mm Bed width 260 mm Quill Ø 50 mm Stroke pinole 120 mm Spindle taper 3 Mk Workpiece weight 150 Kg Power 5,3 kW Speeds / ranges 3000 Rpm Feed rate X-Axis 0.787 mm/min. DIMENSIONS Length 1600 mm ...
used
Center height: 0 mm Center distance: 1000 mm Spindle bore: 36 mm SPECIFICATIONS Swing over bed Ø 330 mm Control Conventionel Swing over cross slide 210 mm Distance between centres 1000 mm Spindle bore 36 / 25 mm Spindle speeds / ranges 30 - 2500 Rpm Power 2.2 Kw DIMENSIONS Length 1800 mm Width 850 mm Height1400 mm - incl. collet device + inserts 29 pieces 2 - 30 mm- incl. 3 chuck 150 mm ?- incl. 4 chuck 150 mm ?- incl. change gears
used
teach-in touch Siemens control Swing over bed: 515 mm Swing over cross-slide: 328 mm Distance centre tot centre: 1500 mm Dia of spindle bore: 108 mm (option !!) Power on the spindle: 10 HP Number of speeds: 16 > 1500 rpm (option !!) Command: Siemens Weight: 2270 kg
used
Stock Number: 3780 CNC LATHE Manufacturer: EMCO, Type: HYPERTURN 665 MC PLUS Machine NO.: R7AQ2301, Year of manufacture: 2002 Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 744 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 +/- 50 mm B Axis Movement Stepless 45 Degree Tool turret 1 with 12 VDI 30 stations Powered stations turret 1 12 pc. - 4000 rpm Y+B pieces. Engine power driven tools 6.7 Kw Tool turret 2 with 12 pc. VDI 30 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 0-5000 Pr/min Motor power counter spindle 17/22 Kw Control Siemens 840 D Fabr. Power on 10650 hours Controlled in 8 axis - x1-x2-z1 ...
used
Stock Number: 3780 CNC LATHE Manufacturer: EMCO, Type: HYPERTURN 665 MC PLUS Machine NO.: R7AQ2301, Year of manufacture: 2002 Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 744 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 +/- 50 mm B Axis Movement Stepless 45 Degree Tool turret 1 with 12 VDI 30 stations Powered stations turret 1 12 pc. - 4000 rpm Y+B pieces. Engine power driven tools 6.7 Kw Tool turret 2 with 12 pc. VDI 30 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 0-5000 Pr/min Motor power counter spindle 17/22 Kw Control Siemens 840 D Fabr. Power on 10650 hours Controlled in 8 axis - x1-x2-z1 ...
used
Stock Number: 3817 CNC LATHE Manufacturer: EMCO , Type: HYPERTURN 665 Machine NO.: R7AR2101, Year of manufacture: 2003 Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 644 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 mm +/- 50 mm Tool turret 1 with 12 / VDI 30 stations Powered stations turret 1 12 - 4000 rpm pcs. Engine power driven tools 6.7 Kw Tool turret 2 with 12 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 5000 Pr/min Motor power counter spindle 17/22 Kw Control Siemens 840 D Fabr. Controlled in 7 (X1-X2-Z1-Z2_C1-C2-Y) axes Accessories: Material feeder KAMA 4265 mm Lengt ...
used
This EMCO LABOR E260 Lathe was built in the year 2001 in Italy. It is equipped with a CNC FAGOR control unit. The machine has a bar passage of 78 mm.
used
This Emco Concept TURN 450 Vertical Machining center was manufactured in the year 2013 and has 26337 production hours. It is equipped with an EMCO SIEMENS SINUMERIK OPERATE control unit. The machine has a spindle speed of 6300 rpm.
used
Key data: 400 mm, 1000 mm, 250 mm
1 L + Z lathes with digital display ( machine is from training workshop ) Fabrilat: EMCO Model: Emcomat 20D Year of construction: 2011 Turning diameter over bed: 400 mm Turning diameter via transverse support : 250 mm Turning length: 1000 mm Speed range up to: 3000 rpm. Spindle bore: 50 mm Equipment / Accessories: Digital
used
Lathe beds, unused Compakt 5 , Compakt 8, Compakt 11, Super 11 Miscellaneous: clamping tables, angle tables, steady rests, lathe spindles, milling spindles, ...
used
This EMCO SUPER11 CD Lathe was manufactured in the year 2005 in Austria. It offers a tip width of 650 mm, a swing diameter over bed of 280mm and a rotation diameter over cross slide of 170 mm which is ideal for relatively large workpieces. With its speed range from 55 to 2200 rpm it offers precise control. It features a longitudinal feed in the range of 0.03 - 0.3 mm/rev. The machine has been standing for 4 years, so the rust film needs to be removed. In general it has relatively low hours for its age. A second unit EMCO SUPER11 CD, YOM 2003, is available.
used
This EMCO HYPERTURN 65-1300 DUOTURN CNC Turn-Mill Center was built in the year 2018 in Austria. It is equipped with a SIEMENS Sinumerik 840D SL Control and 2 turrets including milling drive and 2 Y-axes. This highly productive CNC turning/milling center is perfect for the complete machining of turned and milled parts with 1300 m spindle distance. It has integrated spindle motors (ISM) on the main and counter spindles with a spindle speed range from 0 - 5000 min-1. This complete center features 2x 12-fold tool turret radial with directional logic for up to 2x 12 driven tool stations (swivel speed adjustable with feed switch). It comes with several extras from MT65/HT65 BigBore77 to BMT turret (top right) with direct drive for HT65DT/HT65TT/MT65 (the VDI30 standard turret is replaced by a BMT turret with BMT55P precision interface). See original PDF (German) with all positions attached. Ch ...
used
CMT Ursus/Emco Ø 500 x 1500 mm CNC Swing over bed: 500 mm Swing over cross-slide: 265 mm Distance centre tot centre: 1500 mm Max longitudinal travel Z-axis: 1500 mm Max cross travel X-axis: 240 mm Dia of spindle bore: 58 mm Power on the spindle: 7,5 kW Number of speeds: 15 > 1500 rpm Command: CMT Weight: 2 ton
used
Key data: 300 mm, 200 mm, 350 mm
1 universal tool milling machine Make: EMCO Model: FB 3 Year of construction: 2008 Travel X-Y-Z: 300 x 200 x350 Table size: 600 x 200mm Tool holder: SK 40 Spindle speed up to: 2800 rpm. Feed range: 850 - 550 rpm. Rapid traverse: 1200 rpm. Table load: 50 kg. Equipment/Accessories: Digital display made by Heidenhain Rigid angle table
used
EMCO - Loading arm 4 inches - used - as spare part carrier
used
Traypacker power food Capacity: 14,400 cups/h à 125 g / cups, used in very good condition Technical data: production capacity: 40 cartons / min 6 Cup/tray = 240 cups per minute = 14,400 Cup 125 g / Cup year: 2008 Dimensions: Ready-cut pieces Lxwxh: 698,5 x 168,0 x 1.5 mm Cover LxDxH: 95.5 x 95.5 x 9.0 mm Cup DxH: 92.5 x 42.0 mm machine dimensions: Lxwxh: 7500 x 7400 x 3000 mm Weight: approx. 6,800 kg Original price: 950,000
used
Table length: 800 mm Table width: 400 mm Longitudinal X: 600 mm Cross Y: 400 mm Vertical Z: 400 mm MACH-id 4416 MAKE EMCO Austria TYPE FB-5 YEAR 2002 SPECIFICATIONS X Axis mm 600 Z Axis 400 Y Axis mm 400 Table size 800 x 400 Table load Kg 400 Spindle taper Sk 40 Spindle rpm 3150 DIMENSIONS Length 2200 mm Width 2200 mm Height 2000 mm
used
North Star NSRC / EMCO Pulse Generator Pulse Generator 54kV The pulse generator used in this system consists of two capacitor assemblies which are charged to opposite polaritaants. The system is operated with pressurized insulating gas to supply the specified voltage range of the operation. nitrogen is used for the pulsergefaess for the entire range, wherethe pulse generator pressure of atmospheric pressure (0 psig) reaches to a maximum (60 psig). With 60 psig nitrogen, the pulse generator has at least 27 kV per capacitor and thus delivers a pulse of about 54 kV to the peaking capacitor.
used
Spindle: ISO 30 Travel (X/Y/Z): 300 / 200 / 350 mm Speeds: (8) 80 - 2200 rpm Spindle stroke: 45 mm Feed: 20 - 200 mm/min Table size: 600 x 200 Extension: 110 mm Head swivel: +/- 90° Engine power: 1.1 / 1.4 kW Connection: 380 V / 16 A Dimensions, approx.: 1280 x 1120 x 1750 mm Weight approx.: 450 kg Facilities: - Swivel milling head +/- 90° - 3-axis digital display - Coolant foot with pump - Emergency-off-stroke button - Machine light - Milling machine vice RB 133 with turntable, Röhm - 4 tool holders
used
Key data: 800 Heidenhain, 400 TNC 124, 600
Table length: 800 mm Table width: 400 mm Longitudinal X: 600 mm Cross Y: 400 mm Vertical Z: 400 mm CNC Brand: Heidenhain CNC Model: TNC 124 X-Axis: 600mm Y-Axis: 400mm Z-Axis: 400mm Table Length: 800mm Table Width: 400mm Table load: 300Kg Spindle speeds: 4000Rpm Feed rate X-Axis:2.000mm/min. Feed rate Y-Axis:2.000mm/min. Feed rate Z-Axis:2.000mm/min. Stroke pinole: 100mm Length: 2.200 mm Width: 2.200 mm Height: 2.200 mm Weight: 2.200 kg
used
Longitudinal X: 450 mm Cross Y: 300 mm Vertical Z: 350 mm Spindle taper: 40 Positions ATC: 0 SPECIFICATIONS X - Travel 450 mm Y - Travel 300 mm Z - Travel 350 mm Controll 3 axis Dro Table Length x Width 800 x 400 mm Table load in kG 400 Kg Spindle Taper Sk 40 kW power on spindle 3,2 kW Spindle speeds / ranges 50 - 2500 Rpm
used
Table length: 800 mm Table width: 400 mm Longitudinal X: 600 mm Cross Y: 400 mm Vertical Z: 400 mm Make EMCO F B 5 Type FB 5 Year 1998 Universal milling machine active digital Table length (mm) L = 800 Table width (mm)W = 400 Longitudinal X (mm)X = 600 Cross Y (mm) Y = 400 Vertical Z (mm) Z = 400 Sk40/3150/7.5Swivable head 90 Gr.Feeds all directions