used EMCO CNC Universal Milling Machines

Table length: 800 mm Table width: 400 mm Longitudinal X: 600 mm Cross Y: 400 mm Vertical Z: 400 mm MACH-id    4416 MAKE        EMCO Austria TYPE          FB-5 YEAR         2002 SPECIFICATIONS X Axis mm       600 Z Axis              400 Y Axis mm     400 Table size        800 x 400 Table load Kg     400 Spindle taper      Sk 40 Spindle rpm        3150 DIMENSIONS Length        2200 mm Width         2200 mm Height         2000 mm

Key data: 800 Heidenhain, 400 TNC 124, 600

Table length: 800 mm Table width: 400 mm Longitudinal X: 600 mm Cross Y: 400 mm Vertical Z: 400 mm CNC Brand: Heidenhain CNC Model: TNC 124 X-Axis:         600mm Y-Axis:         400mm Z-Axis:         400mm Table Length:   800mm Table Width:    400mm Table load:     300Kg Spindle speeds: 4000Rpm Feed rate X-Axis:2.000mm/min. Feed rate Y-Axis:2.000mm/min. Feed rate Z-Axis:2.000mm/min. Stroke pinole:  100mm Length:         2.200 mm  Width:          2.200 mm  Height:         2.200 mm  Weight:         2.200 kg 

Table length: 800 mm Table width: 400 mm Longitudinal X: 600 mm Cross Y: 400 mm Vertical Z: 400 mm Make EMCO F B 5 Type FB 5 Year 1998 Universal milling machine active digital Table length (mm) L = 800 Table width (mm)W = 400 Longitudinal X (mm)X = 600 Cross Y (mm) Y = 400 Vertical Z (mm) Z = 400 Sk40/3150/7.5Swivable head 90 Gr.Feeds all directions  

Key data: 300 mm, 200 mm, 350 mm

1 universal tool milling machine Make: EMCO Model: FB 3 Year of construction: 2008 Travel X-Y-Z: 300 x 200 x350 Table size: 600 x 200mm Tool holder: SK 40 Spindle speed up to: 2800 rpm. Feed range: 850 - 550 rpm. Rapid traverse: 1200 rpm. Table load: 50 kg. Equipment/Accessories: Digital display made by Heidenhain Rigid angle table

: gebraucht : 1986 : 4545 : prompt, Zwischenverkauf v : Österreich : 8400 € : 1 : 80 - 2200 (8) U/min : DIN2078 ISO30 (Anzugsschr : 300 x 200 x 350 mm : 600 x 200 mm : 1250 mm : 1350 mm : 1550 mm : 450 kg : 1200 mm/min. : 45 mm : 1600 Nm : 1,1/1,4 kW : 600 x 200 mm : 20 - 370 mm : 84 - 434 mm : 20 - 200 mm/min coolant equipment machine lamp 11 Pc. Milling arbors machine feet Swivelling vertical milling head (+/- 90°) with extendable spindle sleeve Horziontal milling spindle User Manual in German DOES NOT COMPLY WITH GERMAN UVV &, AUSTRIAN AMVO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This EMCO EMCOMAT FB-450 Universal Machining center was manufactured in the year 2012 in Austria and has 1262 production hours. It is equipped with a EMCO CYCLE control unit and has 3 axis. The machine has a spindle speed of 20-5000 rpm.

- X: 420 mm - Y: 330 mm - Z: 400 mm - Table size: 850 x 325 mm - Speed range: 0 - 5000 rpm - Spindle mount: SK 40 - Rapid traverse: 12 m/min - WZ changer: 12-speed - Tool holder: 40 SK - Tool weight max.: 5 kg - Tool length max.: 220 mm - Tool Ø max.: 63 mm - Control: Sinumerik 810 M - Switch-on hours: 40484 h - Total power: 15 kW - Machine weight: 3200 kg - Dimensions (W x D x H): 2.4 x 2.3 x 2.45 m - Condition: good, ready for immediate use Details one tool station is currently defective, nice compact machine, can be used immediately Accessories HILMA SM 125 machine vice, various recordings in the magazine, documentation, machine feet

Vertical machining center, very good condition, electrified to visit, with many accessories Control : Sinumerik 810D with Shopmill, Procedure: X-420mm, Y-330, Z-240, Table: 850x325mm Spindle: SK40, 0 - 5000 rpm, 100Nm Feed rate: up to 12000 mm/min ATC : 12 Pos. Dimensions: 230 x 240 x 245 cm , Weight : 2900kg incl. : 2 machine vices, 30 holders, 3D probe, tool cabinet with clamping tools, milling cutter, ....

Spindle: ISO 30 Travel (X/Y/Z): 300 / 200 / 350 mm Speeds: (8) 80 - 2200 rpm Spindle stroke: 45 mm Feed: 20 - 200 mm/min Table size: 600 x 200 Extension: 110 mm Head swivel: +/- 90° Engine power: 1.1 / 1.4 kW Connection: 380 V / 16 A Dimensions, approx.: 1280 x 1120 x 1750 mm Weight approx.: 450 kg Facilities: - Swivel milling head +/- 90° - 3-axis digital display - Coolant foot with pump - Emergency-off-stroke button - Machine light - Milling machine vice RB 133 with turntable, Röhm - 4 tool holders

Longitudinal X: 450 mm Cross Y: 300 mm Vertical Z: 350 mm Spindle taper: 40   Positions ATC: 0   SPECIFICATIONS X - Travel   450 mm Y - Travel  300 mm Z - Travel  350 mm Controll  3 axis Dro Table Length x Width  800 x 400 mm Table load in kG  400 Kg Spindle Taper  Sk   40 kW power on spindle  3,2 kW Spindle speeds / ranges  50 - 2500 Rpm  

Table length: 500 mm Table width: 320 mm Longitudinal X: 700 mm Cross Y: 500 mm Vertical Z: 500 mm CNC Brand: Heidenhain CNC Model: HeidenHain TNC 124 SK 40 tools included Collet device included Equipped with handwheels X-Axis:         700mm Y-Axis:         500mm Z-Axis:         500mm Table Length:   500mm Table Width:    320mm Table load:     600 Spindle speeds: 3150Rpm Feed rate X-Axis:3000mm/min. Feed rate Y-Axis:3000mm/min. Feed rate Z-Axis:1500mm/min. Stroke pinole:  100mm Length:         2150mm Width:          1900mm Height:         2320mm Weight:         2550kg

Digital display Heidenhain. Carriage travel range Sledge travel longitudinal (X) 450 mm Sledge travel transverse (Y) 300 mm Sledge travel vertical (Z) 350 mm Clamping surfaces 800 x 400 mm Tool holder SK 40 Quill stroke 100 mm Swivelling vertical milling head ± 90° Speed range 50-2500 rpm Dimensions: Length 1485 mm Width 1475 mm Height 1475 mm Weight approx. 1500 kg

This EMCO HYPERTURN 65 PM CNC turning milling center was manufactured in the year 2019 and has 13650 production hours. It is equipped with a SIEMENS control unit. The machine has a spindle speed of 12000 rpm.

CNC EMCO Turn E45 machine with Siemens console + IEMCA bar feeder Boss 545/21 2011 perfect quality

X/Y/Z 200 / 150 / 250 mm Distance spindle-table 95 - 245 mm Rapid traverse in X/Y/Z 5 m/min Working feed X/Y/Z - 5 m/min Clamping surface 420 x 125 mm table load 10 kg speed 5000 rpm drive power 1.1 kW Number of tool stations10 tool diameter 55 mm tool length 50 mm Dimensions (LxWxH)1135 x 1100 x 1100 mm Machine weight 400 kg

Emco Maxxmill 500 5 axis machining center Year of construction 2011 Heidenhain TNC 620 3 + 2 axles Spindle with 10,000 rpm 30-speed tool changer SK40 Hinged Chip Conveyors

A machining center with a pallet changer from the manufacturer Emco Famup is offered here. The machine was used in the training sector and is therefore in very good condition. Manufacturer: Famup Emco Model: MCP 70-50 Year of construction: 2013 Control: Siemens Sinumerik 840D with PCU20 Specifications: Spindle power 35 kW/S6 (22.5 kW/S1) Speed: 50 - 12,000 rpm Torque: 120 Nm/s6 (76 Nm/s1) Tool holder: ISO 40 DIN 69871 Drum magazine 30 tool positions Travel distances: 700x500x640 mm Rapid traverse X-Y-Z: 40 m/min Clamping surface: 600x450mm Pallet changer Machine dimensions: 4000x2500x3000 mm Machine weight: 5500 kg Conveyor Coolant system Switch-on hours: approx. 22,000 h Spindle hours: approx. 11,000 h Working hours: approx. 9,800 h

X-travel: 600mm, y-travel: 400mm, z-travel: 400mm, spindle rotational speed: 63-3150/min, table dimensions: 800x400mm, tool holder: SK40, feed rate: 8-800/min, quill stroke: 105mm, connected load: 4kW, length: 2500mm, width: 2200mm, height: 2200mm, weight: 2.9t, with coolant device, chip guard and tool clamping.

Emco Emcoturn 365 - 65, Year of construction 2000, Control Siemens 810 D, Travel X/Z 210/610 mm, Turret 12-fold VDI 30 all stations driven, Angetr. Tools up to 4,000 rpm, collet chucks, Tailstock C axis 0.001°, spindle speed up to 6,300 rpm, coolant device, Chip pan, accessories, Available from 12/2023

year of construction 2013 Emco MaXXturn 45SMY The perfect solution for economical processing of inserts or bar material up to a diameter of 45 mm. Equipped with a counter spindle, driven tools, a highly accurate C-axis and high rapid traverses, the MaXXturn 45 offers everything you need to produce complex turning/milling parts properly and as efficiently as possible. What is striking is the very stiff construction of the Y-axis with a wide stroke. The MaXXturn series offers you limitless possibilities combined with the highest precision. The MaXXturn 45 has a Fanuc 31i control with Manaul Guide. This is an ideal and favorable machine for many tool makers. Here too, a takeover spindle and a highly accurate and rigid Y-axis can be of great added value. This MaXXturn 45 has, among other things: Bar feeding interface Product collection device 25 Bar coolant pump Flush gun Hain ...

- X: 300 mm - Z: 300 mm - Circumferential Ø above bed: 340 mm - Circulation Ø over cross slide: 158 mm - Speed range: 0 - 6000 rpm - Spindle passage: 53 mm - Tool holder: DIN 55026 - Revolver: 10-speed - Driven tools: no - Control: Siemens Sinumerik - Machine ON: 64074 h - Total power: 20 kW - Machine weight: 2400 kg - Space requirements (W x D x H): 2.78 x 2.11 x 1.71 m Accessories Tools in the turret

CNC lathe EMCOTURN 465/Siemens 840 C /2xSpindle /2xTurret

- Circulation diameter over bed: 430 mm - Workpiece weight: max. 30 kg - Circulation diameter over face slide: 210 mm - Center width: 700 mm - Turning length: max. 510 mm - Speed range: 6,300 rpm - Collet chuck: for 173 E collets - Spindle clearance: 45 mm - Chuck diameter max.: 160 mm - Revolver: 12-speed - Driven tools: no - Tailstock: yes - Control: Siemens 810 D - Parts catcher: yes - Chip conveyor: no - Total power: 17 kW - Machine weight: 2,600 kg - Space requirements (W x D x H): 2.7 x 2.0 x 2.0 m - Condition: very good - Duty cycle: 24602 h Accessories Documentation

Key data: 45 mm

Control Fanuc 0iTF Main spindle: bar passage 45 mm, drive power 13 kW, 0-6,300 rpm Counter spindle: drive power 7.5 kW, speed range 0 -6,300 rpm Tool turret with 12 positions for driven tools VDI 25 radial Drive power of the driven tools 4 kW Travel range of the y-axis + 40 / - 30 mm C-axis for the main and counter spindle Machine with precast dust edge, spindle extension, tool measurement, chip conveyor, additional high-pressure coolant pump 14 bar, Accessories: Short bar feeder for bar material length 100-1200 mm, Irco ILS KUL 5012 -II, as well as a material layer Breuninger ILS-MUK-70-IV, new tool accessories, clamping heads, chucks and connection adapter worth €18,000, chip conveyor, operating instructions

Machine Type: CNC Lathe Manufacturer: EMCO Model: EMCOTURN 342 Year of construction: 1993 Condition: excellent Offer Type: Used Machine Specifications: Control: Siemens Sinumerik 810 T Working size: Circulation Ø above bed 340 mm, Circulation over face carriage 158 mm, Spindle passage 53 mm, Passage in drawpipe 42 mm Travel range: Carriage travel longitudinal (z) 300 mm Speed range: 0 – 6000 rpm. Propulsion: 9 / 15 kW Remark: Only 5791 switch-on hours! This machine has never been used for metal processing, only fine wood for instrument making. Sauter 8-speed disc turret VDI 30, pneumatically adjustable tailstock MK3 with hydraulic quill, automatic 160 mm Forkardt three-jaw power chuck, 8 tool holders with tools Weight: 2400 kg The machine is in excellent condition and ready for immediate use and can be viewed and demonstrated by us. We would be p ...