Category: 1800 medical equipment / Surveillance monitors
Latest update: 12.02.2024 add to watchlist
approved
dealer
item-No.: 160840746

used

check Seller: Medizintechnik
Location: Land-de
Price: 495 € add to watchlist

St. Jude Medical Kidney Ablation, EnligHTN, RF ABLATION Generator ENL-GEN2 You will receive a VAT invoice.

Category: 1900 general inventory
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 163583698

used

check Seller: Surplex GmbH
Location: Calcinato Land-it
Price: used machinery auction RESALE 127 € add to watchlist

Description: Video surveillance kit complete with 4 cameras Approx. Onsite Dimension. (l x w x h): 400 x 200 x 400 mm, weight approx.: 2 kg

Category: 1900 general inventory
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 163583708

used

check Seller: Surplex GmbH
Location: Calcinato Land-it
Price: used machinery auction RESALE 127 € add to watchlist

Description: Video surveillance kit complete with 4 cameras Approx. Onsite Dimension. (l x w x h): 400 x 200 x 400 mm, weight approx.: 2 kg

Category: 1707 other computer and office equipment
Latest update: 21.03.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 163624042

used

check Seller: Hascon
Location: 10717 Berlin Land-de

add to watchlist

We sell Desktops Monitor Notebooks Server This only makes sense for German brokers for direct pickup in the greater Frankfurt area. In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at a reasonable price from HASCON! The sale is only made to companies. We have ...

Category: 1707 other computer and office equipment
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 163511746

used

check Seller: Proventura Industrie Auktionen GmbH
Location: DE - 29378 Land-de
Price: used machinery auction RESALE 75 € add to watchlist

Flat screen monitors DELL P2719H 2 pcs., double table mount HUANUO

Category: 1707 other computer and office equipment
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 163511750

used

check Seller: Proventura Industrie Auktionen GmbH
Location: DE - 29378 Land-de
Price: used machinery auction RESALE 75 € add to watchlist

Flat screen monitors DELL P2719H 2 pcs., webcam

Category: 1707 other computer and office equipment
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 163511751

used

check Seller: Proventura Industrie Auktionen GmbH
Location: DE - 29378 Land-de
Price: used machinery auction RESALE 75 € add to watchlist

Flat screen monitors DELL P2719H 2 pcs., webcam

Category: 103 milling machines
Latest update: 30.08.2021 add to watchlist
approved
dealer
item-No.: 4366501
New in: 2013

used

check Seller: AWM GmbH
Location: Haiger Land-de
Price: 750 € add to watchlist

Data sheet / Offer spare Monitor Deckel Controls Dialog 11 Dialog 12 Overview: - 12,1“ industrial monitors TFT substitute with 14“CRT monitors. - Connection: compatible plug connectors to the very easy installation. - Chassis monitor from high-quality high-grade steel case with compatible connection. Description: The monitor is conceived so he at few minutes of the operator independently after the enclosed instructions it can be exchanged. The control timing is preset i.e. the monitor is ready for use immediately. Micro-adjustments can be changed about the self explicatory menu ON SCREEN arbitrarily by customer wish.The connections for the graphics signal are by a Sub-D conector 25pol. he can not wrong are put on is able marked. The monitor TFT is fastened to the same points like the original monitor and this guarantees easy installation

Category: 103 milling machines
Latest update: 30.08.2021 add to watchlist
approved
dealer
item-No.: 4366507

used

check Seller: AWM GmbH
Location: Land-de
Price: 690 € add to watchlist

Data sheet / Offer spare Monitor Heidenhain Controls TNC 131, 135, 145, 150, 151 Overview: - 8,4“ industrial monitors TFT substitute with 14“CRT monitors. - Connection: compatible plug connectors to the very easy installation. - Chassis monitor from high-quality high-grade steel case with compatible connection. Description: The monitor is conceived so he at few minutes of the operator independently after the enclosed instructions it can be exchanged. The control timing is preset i.e. the monitor is ready for use immediately. Micro-adjustments can be changed about the self explicatory menu ON SCREEN arbitrarily by customer wish.The connections for the graphics signal are by 24pol. Centronics conector he can not wrong are put on is able marked. The monitor TFT is fastened to the same points like the original monitor and this guarantees easy installation

Category: 103 milling machines
Latest update: 30.08.2021 add to watchlist
approved
dealer
item-No.: 4366523

used

check Seller: AWM GmbH
Location: Haiger Land-de
Price: 750 € add to watchlist

Data sheet / Offer spare Monitor Heidenhain Controls TNC 155,355 Overview: - 12,1“ industrial monitors TFT substitute with 14“CRT monitors. - Connection: compatible plug connectors to the very easy installation. - Chassis monitor from high-quality high-grade steel case with compatible connection. Description: The monitor is conceived so he at few minutes of the operator independently after the enclosed instructions it can be exchanged. The control timing is preset i.e. the monitor is ready for use immediately. Micro-adjustments can be changed about the self explicatory menu ON SCREEN arbitrarily by customer wish.The connections for the graphics signal are by 15 pol. SUB-D conector he can not wrong are put on is able marked. The monitor TFT is fastened to the same points like the original monitor and this guarantees easy installation

Category: 109 other metal working machines
Latest update: 13.11.2023 add to watchlist
approved
dealer
item-No.: 90778548

used

check Seller: Zölch GmbH & Co. KG
Location: Land-de
Price: 550 € add to watchlist

Industrial replacement monitor 12.1 TFT monitor High-quality anti reflective glass incl. cable with 15-pin. D-Sub-Plug Technical Data: TFT-LCD Monitor 12.1 inch Display/Resolution 800 x 600 Pixels Brightness 400 cd/m2 Contrast ratio 500:1 Response time 8 ms Frequency 60 hz Display range 246 x 185 mm External power supply 12V Operating power unit -10c +60 celectricity consumption max. 30 W connection D-Sub 15-pol, 2 row OSD control Brightness, contrast control, auto-adjustment phase position, clock, instalment speech, reset connection cable, power supply The Front panel is not included in the offer. The installation is carried out on the existing front panel. 24 Month Warranty! More monitors, new and used on request! ; New!

Category: 103 milling machines
Latest update: 15.02.2024 add to watchlist
approved
dealer
item-No.: 90778641

new

check Seller: Zölch GmbH & Co. KG
Location: Land-de
Price: 690 € add to watchlist

ndustrie replacement monitor 12.1 TFT monitor Matching for lid machines with dialog 11 control High quality anti reflective glass Technical data: TFT-LCD Monitor 12.1 inch display/exposure 800 x 600 pixels brightness 40 0 cd/m2 Contrast ratio 500:1 response time 8 ms frequency 60 hz display range 246 x 185 mm External power supply 12V operating power system -10c +60c power consumption max. 30 W connection D-Sub 9pol. 2 consecutive OSD control Brightness, contrast adjustment, auto adjustment phase position, clock, voice installation, reset accessory: cable, power supply 24 months warranty! More monitors, new and used on request!; New

Category: 502 presses
Latest update: 26.02.2024 add to watchlist
approved
dealer
item-No.: 124081503
New in: 2024

used

check Seller: Beckmann Technik & Service KG
Location: Land-de

add to watchlist

Scrap Tyre Baler The BTS-MF450hd and 550hd Special Waste Balers are ideal for compacting difficult materials such as scrap tyres, plastics like car bumpers and plastic canisters, cans, barrels and metal buckets, PET bottles, big bags and much more. The special baling presses impress with their easy operation and large filling volume. Finished bales can be easily removed from the baler with the automatic bale ejector. - Extended cylinders produce a more compact bale with up to 550 kg (material depending) - Suitable for baling scrap tyres, car bumpers, metal and plastic containers, PET-bottles, computer monitors and other heavy duty materials - Extra strong machine body - Retaining Claw system to reduce spring back - Fully automated bale ejector simplifies removal of bale - CE-certified - Quality product Made in Europe Pressing force: 50 Ton Motor: 5.5 kW 16 Amp Power s ...

Category: 103 milling machines
Latest update: 15.02.2024 add to watchlist
approved
dealer
item-No.: 124405419

new

check Seller: Zölch GmbH & Co. KG
Location: Land-de
Price: 690 € add to watchlist

industrial spare monitor 12.1 "TFT monitor Fits lid machines with dialog 11 control high quality anti-reflective glass Technical data: TFT-LCD monitor 12.1 inch Display/Aufloessung 800 x 600 pixels Brightness 400 cd/m2 Contrast ratio 500:1 Response time 8 ms Frequency 60 hz Display area 246 x 185 mm External power supply 12V Betriebstemeratur-10 ° c + 60 ° c Power consumption of 30 W Max D-Sub 9pin connector. 2 row OSD control brightness, Kontrastveraeltnis, car customization Phase position, clock, language install, reset Accessories: Achschlusskabel, power supply 24 month warranty! More monitors, new and used on request!

Category: 502 presses
Latest update: 26.02.2024 add to watchlist
approved
dealer
item-No.: 125158907
New in: 2024

used

check Seller: Beckmann Technik & Service KG
Location: Land-de

add to watchlist

Scrap Tyre Baler The BTS-MF450hd and 550hd Special Waste Balers are ideal for compacting difficult materials such as scrap tyres, plastics like car bumpers and plastic canisters, cans, barrels and metal buckets, PET bottles, big bags and much more. The special baling presses impress with their easy operation and large filling volume. Finished bales can be easily removed from the baler with the automatic bale ejector. - Extended cylinders produce a more compact bale with up to 650 kg (material depending) - Suitable for baling scrap tyres, car bumpers, metal and plastic containers, PET-bottles, computer monitors and other heavy duty materials - Extra strong machine body - Retaining Claw system to reduce spring back - Fully automated bale ejector simplifies removal of bale - CE-certified - Quality product Made in Europe Pressing force: 50 Ton Motor: 5.5 kW 16 Amp Power s ...

Category: 1800 medical equipment
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 141435103
New in: 2010

used

check Seller: Medxray e.K.
Location: Land-de

add to watchlist

Image amplifier with 23cm, 2 x TFT monitors with 50 Hz  Usb Laser crosshairs 1,000 image memory Patien Management (Road Map) built-in dose area meter Resolution 1.2 - 1.4 Lp/m Refurbished

Category: 106 presses
Latest update: 20.04.2021 add to watchlist
approved
dealer
ankerimg
item-No.: 152427729
New in: 2016

used

check Seller: Hidrobrasil GmbH
Location: Deutschland Land-de

add to watchlist

pressure:40 t table length:1000 mm table width:700 mm weight of the machine ca.:9 t dimensions of the machine ca.:4000 x 4400 x 1800 mm stroke length max.:1050 mm dayligth:1200 mm table rotating:um 180 Grad table load:5 t pre-running speed:100 mm/sec return speed:100 mm/sec work speed:von 0 bis 10 mm/sec. Main cylinder:1 Stück Table extendable by:for 1050 mm Table tilting:50 Grad Fold-down upper tool:180 Grad Speed of table:25 mm/sec Light sensors sick:1250 mm Description: Columns and cylinders are made of tool steel SAE 1045 (identical to German standard C 45) and external Induction hardened and chromium-plated. The linear measuring rod communicates the position of the plunger to the controller. The Traverse path, the upper breakpoint And the switch point at which the press should switch from empty journey to working speed, as well as the The end position to be used can be easily and q ...

Category: 106 presses
Latest update: 20.04.2021 add to watchlist
approved
dealer
ankerimg
item-No.: 152427745
New in: 2017

used

check Seller: Hidrobrasil GmbH
Location: Deutschland Land-de

add to watchlist

pressure:40 t table length:1000 mm table width:700 mm weight of the machine ca.:9 t dimensions of the machine ca.:4000 x 4400 x 1800 mm stroke length max.:1050 mm dayligth:1200 mm table rotating:um 180 Grad table load:5 t pre-running speed:100 mm/sec return speed:100 mm/sec work speed:von 0 bis 10 mm/sec. Main cylinder:1 Stück Table extendable by:um 1050 mm Table tilting:50 Grad Fold-down upper tool:180 Grad Speed of table:25 mm/sec Light sensors sick:1250 mm Columns and cylinders are made of tool steel SAE 1045 (identical to German standard C 45) and externally induction hardened and chrome-plated. The linear measuring rod informs the controller of the position of the pestle. The travel path, the upper stop and the switching point at which the press is to switch from empty travel to working speed, as well as the end position to be approached can be entered easily and quickly via the mo ...

Category: 107 sheet metal working / Laser Cutting Machines
Latest update: 11.03.2022 add to watchlist
approved
dealer
item-No.: 153801317

used

check Seller: TDMW.PL Igor Kaliniec
Location: 53145 Wroclaw Land-pl

add to watchlist

TRUMPF TruLaser 5030 Year of prod. 2007. Operational hours laser beam: about 22500 h Operational hours / machine on: about 60000 h Technical condition: good+. Machine under constant service care, all spare parts replaced on time. Recently replaced laser mirrors. The machine is still in production. Control: Siemens 840D Laser power: 5 kW. Maintenance-free turbine TruFlow 5000 Working range: 3000 x 1500 x 115 mm Quality sheet cutting: - black steel up to 25mm - stainless steel up to 20mm - aluminum up to 12mm Equipment: - precise sheet metal burning system - linear drives - conveyor for removing small details and sheet metal remnants - lighting of the working space - positioning laser diode - oil mist spraying - PierceLine system: the function of quick burning into the material, adjusting the laser power to the material being processed. Up to 90% shorter piercing time!  ...

Category: 305 peripheral equipment (e.g. heating,cooling,drying)
Latest update: 27.11.2023 add to watchlist
item-No.: 157609986
New in: 2006

used

Seller: Ring Asset Management GmbH
Location: 8055 Graz Land-at

add to watchlist

1 pc flame pretreatment system with electronic control 1 pc EF 600-1 Burner control consisting of Electrical control with ignition and monitoring device for 1 pc burner, control electronics, control panel with plain text display, Emergency stop setup and interface for external control Mechanical control with Safety valves, gas/air mixers, thermoanemometrial mass flow meters for air and gas, Engine valves, pressure monitors for overpressure and vacuum monitoring and supply air blowers. 1 pcs C24-2300 Film burner, 2200 mm working width, adjustable up to min. 1000 mm with connections for water cooling and water-cooled double T-beam 1 pc spare parts consisting of 2 earth replacement electrodes and 1 replacement fabric Power supply : 400/230 V 50 Hz, 2.5 kVA Gas supply : Natural gas 75 – 100 mbar Heat output : max. 400 kW Gas consumpt ...

Category: 103 milling machines / Milling Centers
Latest update: 21.12.2023 add to watchlist
approved
dealer
item-No.: 157336288

used

check Seller: Komplett-Konzept Verwertungs GmbH
Location: Land-de
Price: VB 550.000 € add to watchlist

ELHA 6 Axis Horizontal Machining Center Xpert-K High-Performance Horizontal Machining Center The newly designed DEPO XPERT K horizontal machining centre offers a high degree of flexibility and above-average productivity. Description Horizontal BAZ The 6 axes are individually controllable. The HSK 100 holder makes it possible to clamp large tools and thus process large areas with high chip removal. Installed is a high-performance G30 fork head spindle with hydromechanical clamping system and a hybrid slewing bearing at top speed which allows extremely high speeds to be driven in order to achieve an optimal milling result even with the smallest tools. This fork head is equipped with a fully automated spindle change cycle, which makes it possible to replace the complete spindle in less than an hour. A hydraulic clamping device is installed for clamping components (effective table ...

Category: 841 paper converting: carton gluers
Latest update: 05.01.2024 add to watchlist
approved
dealer
item-No.: 159129673
New in: 1992

used

check Seller: Kohler Verpackungstechnik GmbH
Location: 75433 Maulbronn Land-de

add to watchlist

Format range: 1350 mm, min 45 mm Equipment: Longitudinal seam, folding bottom, double edge, 4+6 point bonding, electronic upper glue unit HHS Xpect YOC 2017, 8 channel with 4 application heads, disc glue on the left, new electronic servo overtaking system with touchscreen, Feeder with clock control and vibrator, feeder belt with Quick adjustment, pre-breaker right and left, kicker, counter, digital position indicators, additional means transport in the Pre-crusher top/bottom, folding floor module 150 with additional Medium transport top/bottom, additional means transport in folding, Jagenberg DBS01 control, motorized threading station, Video surveillance in the transfer station, fully automatic Format setting Jagset 2, cutting alignment on the press belt, pneumatic, clocked press belt. Overhaul 2022: cleaned, tested, painted and equipped with new feeder and transpor ...

Category: 815 presses: digital
Latest update: 20.11.2023 add to watchlist
approved
dealer
item-No.: 159524685
New in: 2009

used

check Seller: Jorg Graphische Produkte GmbH
Location: 44143 Dortmund Land-de
Price: 39.900 € add to watchlist

- Year of manufacture 2009 | First Installation November 2009 - Total A3 sheets printed: approximate 26.4 million (status from June 2022) - Electrography using dry toner - 5 x High-Precision LED-Printing Heads (CMYK + White) - Standard Unwinder for rolls with 600 mm diameter - Rewinder - Media Width: 200 mm – 330 mm | Printing Area: max 322 mm x 55 m - Media Weight: 40 - 350 gsm (40 - 550 microns) - Web Speed 4/C: Up to 19.2 m/min. (Paper up to 350 gsm) - Printing Speed: up to 380 sqm/hour - Resolution: true 1.200 dpi at 4 bit (1.200 x 3.600 dpi addressability) with variable dot density - Substrates: SA or PS Label (Paper, PP, PET, Vinyl, co-extruded film), Paper, Paperboard, Transfer substrate - Digital Front-End X 800 with Control PC and 2 monitors - Xeikon Software X 800 Voyager with options Barcode and Seq Number - Machine is still under Xeikon Gold Service Contract  ...

Category: 1101 power generators / Standby power systems
Latest update: 04.03.2024 add to watchlist
approved
dealer
item-No.: 159342866
New in: 2022

new

check Seller: Aggregatebau WA Notstromtechnik GmbH
Location: Land-de

add to watchlist

Execution: Aggregate type: stationary Design: Soundproofed Technical data engine: Engine manufacturer: Deutz Engine type: F 4 M 2011 Motor power: 27 KW Cooling: Oil-cooled Start: Electric 12 V DC Speed: 1500 rpm Fuel: Heating oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator Type: Synchronous Generator power: 30 kVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Remote start Switch: Generator switch 4 pole Delivery: Assembled Tank: Version: Base frame tank with drip tray Content / Litre: 50 Dimensions of the unit: Width approx. mm: 960 Height approx. mm: 1,236 Length approx. mm: 2,000 Weight approx. KG: 1.075 Use: Bearing number: 1229 Condition: Demonstrati ...

Category: 104 grinding machines / CNC Round Grinding Machines
Latest update: 12.03.2024 add to watchlist
approved
dealer
item-No.: 159668589
New in: 2013

used

check Seller: Evelin of America Corporation
Location: Land-us

add to watchlist

Naxos CNC Multi-Axis Cylindrical Grinder Year: 1987/2013 Max. swing: 630mm Max. distance workhead face to tailstock face: 4850mm Max. travel for Z axis: 5000mm Max. grinding distance for main wheel: 4520mm X axis infeed travel for both headstocks: 720mm Approx. weight between centers: 4000kg Power requirements: 460/3/60 This machine was completely remanufactured to new specifications in 2013 and installed in 2014. It was stripped down to the bare casting, table/base/wheel heads/work head and tailstock and the second z axis ways were fit and rescrapped. New electrical cabinet with all new wiring to the machine and new all components, hydraulic lines, air lines and new cable carriers were added. New Marathon 60HP motors for both grinding wheel heads. (The drives in the cabinet are set for 40 Hp) The spindle drives in the cabinet are Yakawa built in the USA along with the workh ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
RESALE used machinery 25 years online