used ELEKTRA BECKUM Format Sliding Table Saws

Posten Circular saw motors: 4 electric motors ELEKTRA BECKUM for circular saws 2.8 / 2.2 KW, 3 x 400 volts, 2800 rpm, IP44, cos phi 0.88.

Vertical Band Saw Elektra-Beckum BAS 500 DNB Location of the machine: 76661 Philippsburg The machine can be viewed on site. It works perfectly. You can arrange a viewing appointment at any time. We'd love to hear from you.

Saw blade diameter: max. 250mm, motor speed: 2800rpm, saw shaft speed: 3800rpm, saw blade bore: 20mm. Max. Cutting height 90°/45°: 82/55mm, table size: 710 x 900mm, angle adjustment: 0° to 45°.

Description: - Serial number: 10.002PK - Table size: 710 x 900 mm - Saw blade diameter: 250 mm max - Saw blade bore: 20 mm - Motor speed: 2800 rpm - Saw shaft speed: 3800 rpm - Cutting height 90°/45°: 82/55 mm - Motor power: 3,1 kW weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 2,600 x 1,900 x 950 mm

Lathe machine make ELEKTRA BECKUM type HDM 1000Machine -No: 1000-85 built in 1985Technical specifications:Distance between centers: 1000 mmCenter height: 160 mmlargest turning diameter: 320 mmSpindle thread: M 20 x 1.54 spindle speeds: 700 - 2200 rpm.Quill taper: MK 3Quill stroke: 50 mmPower connection: 0.55 kW / 220 V.External dimensions approx .: 1300 x 700 x 1200 mmwith- Three-jaw lathe chuck diameter 100 mm- Emergency stop switch- underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Machine type: Table milling machine Manufacturer: ELEKTRA BECKUM Model: TF 100 M 2.8 DN Built: 1998 Condition: ready for use Offer type: used machine Technical data: Table: 520 X 420 mm Speeds: 4000/6000/7500 rpm. Drive: 1.8 KW Comment: with an additional horizontal sawing unit (1.5 kW) for Two-sided machining with roller conveyor and lateral material guidance, everything can be easily dismantled Weight: 150 kg

incomplete or defective.

Description Small compressor Elektra Beckum Basic Euro from 2003 very robust, mobile piston compressor – suitable for small and diverse commercial applications for single-phase alternating current with pressure reducer for controlled working pressure Technical data Intake capacity: 220 l/min Filling capacity: 110 l/min Max pressure: 8 bar Nominal intake power: 1.1 kW Speed: 2,850 /min Voltage: 230 V Boiler size: 24 l Weight: 21.5 kg Dimensions: 600 x 260 x 660 mm

Double grinding block make ELEKTRA BECKUM type SL 200Year of construction 1989Grinding wheel size: 200 x 40 mmSpeed: 2830 rpm.Drive power: 1.1 kWPower connection: 380 V / 50 HzWith- Knife sharpener length 800 mm- Knife sharpening device adjustable in anglevery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Dust suction hood: x mm Motor output: x kW Air consumption: 2000 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Piston compressor, Compressor -Compressor: without function, is sold as a spare parts carrier -Handover in the current condition as seen -Flow rate: 340 l/min -Max. Pressure: 10 bars -Motor power: 4 kW -Tank capacity: 150 l -Dimensions: 1400/500/H900 mm -Weight: 180kg

feed pressure: 10 bar liter capacity: 1400 m³ / min dimensions: 700 x 550 x 1100 mm total power requirement: 11 kW weight of the machine ca.: 275 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical details: - Table length: 520 mm - Table width: 420 mm - Table width with mounted extension: 600 mm - Table height: 875 mm - Max. diameter of the table opening: 160 mm - Spindle diameter: 30 mm - Max. diameter of the milling tool: 150 mm - Spindle speeds: 4,000 / 6,000 / 7,500 rpm - Height adjustment of the spindle: 12 cm - Height of the milling fence: 125 mm - Diameter of suction nozzle: 100 mm - with pressure device - with 1 x milling tool (diameter 95 mm) Engine data: - Voltage: 400 V - Current: 4.0 A - Frequency: 50 Hz - Power: 1.8 kW - Speed: 2,800 rpm Dimensions (LxW): 600 x 420 mm Transport dimensions (LxWxH): 800 x 600 x 1,300 mm The machine has been completely cleaned in our company and checked for correct functioning. It is supplied with a mounted connection cable with a 16A plug (integrated phase changer). (Subject to changes and error ...

Description: Sanding belt width approx. 40 mm Approx. Onsite Dimension. (l x w x h): 600 x 250 x 550 mm, weight approx.: 20 kg

Description: Serial number: 83930458 N = 1400 1/min P2 1.5 kW S1 100% Saw blade width: 6 - 25 mm Max. cutting height: 270 mm Saw blade length: L = 3380 mm Saw table height: 945 mm Projection: 270 mm Saw table swivel angle: 0 - 45° Saw table size: 720 x 535 mm Belt speeds: 410 - 1025 m/min stepless With operating instructions With replacement saw blade weight approx.: 160 kg, Approx. Onsite Dimension. (l x w x h): 840 x 840 x 1,840 mm

Description: Table dimensions: 340 x 330 mm Max. clearance height: 100 mm With vice and stop weight approx.: 40 kg, Approx. Onsite Dimension. (l x w x h): 580 x 530 x 820 mm

Description: Double bench grinder Approx. Onsite Dimension. (l x w x h): 400 x 400 x 1,200 mm, weight approx.: 50 kg

Special industrial pumps different manufacturers: (A) manufacturer: Elektra, dimensions: 1400mm, Elekrtomotor: 230/400V (B) manufacturer: Flux, dimensions: 1330mm, Elekrtomotor: 460W, 230V, type: F458 (C) manufacturer: Flux dimensions: 1330mm, Elekrtomotor: 230V 650W, type: F450 ex Prices depending on the model, upon request

rated capacity: . kVA capacity in kVA: . kVA Heating capacity: . kW power fuel: . 0 weight of the machine ca.: . t dimensions of the machine ca.: . m Construction site electricity distributor 550 x 400 x 1350 The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Construction site power distributor Elektra VDE 0100 / 0612 12 meter cable 3 sockets 230 V 16 A 2 sockets 380 V 16 A 1 socket 380 V 32 A

used DC shunt motor 18 kW Anchor voltage 460 V 45 A 3000 rpm with filter fan and tachogenerator can be installed as B3 or B5 Collector and carbon brushes top

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Format circular saw make ALTENDORF type F 90Serial -No: 6911133 year of manufacture 1969Technical specifications:Cutting length: 2800 mmCutting width: 1000 mmCutting height: 0 - 55 to 75 - 155 mm4 speeds: 3000 / 4000 / 5000 / 6000 rpm.Saw blade diameter :250 - 450 mmSaw blade bore: 30 mmDrive power: 5.5 kWPower connection: 380 V / 50 HzApprox. weight: 970 kgwith- Scorerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

- Exhibition machine - manual height adjustment, double trolley, pre-scoring unit, swivelling, boom table, angle miter stop, automatic brake, lowerable below table height ---------- technical data ---------- swivel range: 0 - 45 , cutting length: 2,500 mm, cutting width at parallel stop: 1,000 mm, max cutting height: 100 mm, max saw blade : 315 mm, swivel range miter stop: up to 49 , Speeds: 4,200 rpm, engine power main engine: 5.5 hp / 4.0 kW, engine power pre-scratch motor: 0.5 hp / 0.37 kW, working table height: 910 mm, suction nozzle: 1 x 100 / 50 mm each, weight: 450 kg ; new exhibition machine

-Exhibition machine-Double trolley swivel one. Height and swivel adjustment Rip fence with man. Fine adjustment angle mitre stop Extraction hood large Vorritzer Basic with LED lighting---------- Technical data ---------- swivel range: 0 - 46 Carriage length: 3,200 mm Rip fence: 1,000 mm Cutting height: 100 mm max. saw blade : 315 mm Cut-to-length stop extendable to: 3,450 mm Speeds: 3,600 / 4,200 rpm Engine power: 5.5 kW (7.5 hp) Working table height: 880 mm Suction nozzle : 120 + 80 mm ; new exhibition machine