british flag
Resale Logo

Electric used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used medical equipment  Dipl.-Ing. O. Saad  http://www.2hand4sale.de 
banner logo
start page > keywords Electric > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
124970731 109

CHMER CMC865C for sale
Electrical Discharge Machines (EDM)


Table size (WxD): 1000x600 mm Woek tank size (WxDxH): 1600x1000x550 mm Table travel (X/Y): 800x600 mm Ram travel (Z): 500 mm Distance from Ram platen to work table: 300-800 mm Max. Electrode weight: 350 kg Max.. wo ...
used machine
 
Table size (WxD): 1000x600 mm
Woek tank size (WxDxH): 1600x1000x550 mm
Table travel (X/Y): 800x600 mm
Ram travel (Z): 500 mm
Distance from Ram platen to work table: 300-800 mm
Max. Electrode weight: 350 kg
Max.. work-piece weight: 4000 kg
Outside dimensions (WxDxH): 3200x3200x2685 mm
Weight:4500 kg

2010
Price  
  AT   request
124967693 1513

Falck schmidt TS18 Self-Propelled, Electric, 18m W for sale
Scissor lifts


; Gross weight [kg]: 2500; Rear tyres remaining: 30; Front tyres remaining: 30; Maximum lift capacity [kg]: 200
used machine
 
; Gross weight [kg]: 2500; Rear tyres remaining: 30; Front tyres remaining: 30; Maximum lift capacity [kg]: 200
1990
5,900 €  
  NL   request
124970695 1101

DEUTZ MWM TCG2020 12V for sale
Gas generators


NATURAL GAS GENERATOR MWM, TYPE TCG2020-12V. -MAKE: MWM -YEAR: 2008 -OPERATING HOURS: 53.120 H -ELECTRICAL EFFICIENCY: 41%. -ALTERNATOR: 400VOLT -FREQUENCY: 50 Hz. -RATING: 1. 450kVa. (1.160Kwe) -SPEED: 1.50 ...
used machine
 
NATURAL GAS GENERATOR MWM, TYPE TCG2020-12V.

-MAKE: MWM
-YEAR: 2008
-OPERATING HOURS: 53.120 H
-ELECTRICAL EFFICIENCY: 41%.
-ALTERNATOR: 400VOLT
-FREQUENCY: 50 Hz.
-RATING: 1. 450kVa. (1.160Kwe)
-SPEED: 1.500RPM.
-FULLY SERVICED BY MWM DEALER.
-USE OF FUEL: NATURAL GAS.
-ACCESSORIES: GASTRAIN, HEAT EXCHANGER, EXHAUST GASCOOLER, HEATING PUMPS, 3-WAY
VALVES, ELECTRIC MOTORHEATING, MWM CONTROLPANEL, TEM PANEL, BREATHER
FILTERS, VIBRATION ABSORBER AND LOGBOOKS.

We usually have ready in stock of used gas Gen-set brands (Cummins, Perkins, Caterpillar, Waukesha, Deutz MWM, MTU, Jenbacher), etc... 800Kwe current range up to 3,000 Kwe, as a research most welcome to contact US.
2008
Price  
    request
124967951 1008

JLG 35E Electric, 12m Working Height. for sale
Articulated Haulers


; Gross weight [kg]: 4649; Rear tyres remaining: 30; Front tyres remaining: 30; Maximum lift capacity [kg]: 230
used machine
 
; Gross weight [kg]: 4649; Rear tyres remaining: 30; Front tyres remaining: 30; Maximum lift capacity [kg]: 230
1999
6,900 €  
  NL   request
124946045 107

KEMMERICH V 2000 SK S for sale
Decoilers


DECOILING AND EXTRACTING UNIT coil weight 2,00 t mandrel length 280 (300) mm mandrel diameter 420 - 520 mm height floor up to middle of mandrel 980 mm required space app. 5,00 x 1,50 x 2,20 m machine weight app.  ...
used machine
 
DECOILING AND EXTRACTING UNIT

coil weight 2,00 t
mandrel length 280 (300) mm
mandrel diameter 420 - 520 mm
height floor up to middle of mandrel 980 mm
required space app. 5,00 x 1,50 x 2,20 m
machine weight app. 3,0 t

technical details:
material width 265 mm
circular blank – Ø 1.700 mm
height up to middle of shaft 980 mm
coil outside – Ø 2.000 mm
no. of segments 4
length of segments 280 (300) mm
power 1,10 kW
rotation speed of mandrel 17 min-1
working direction left - right

accessories:
decoiling-a. Extracting unit mounted on one frame construction
(with coverplates)
decoiler
control desk with switcher mounted on decoiler
expanding process hydraulically
brake unit pneumatically
driver unit spur gear motor power 1,1 kW
hydraulic unit mounted on frame construction power 2,2 kW
limit stop device (circular blank) circular blank – Ø = 1.700 mm
limit stop device (counter ring) counter ring – Ø = 1.750 mm
decoiler movable manually (handwheel / spindle)
prism – support (bulk) sheet construction

extracting unit
infeed table with infeed-a. centering rolls
no. – infeed rolls (horizontal) 2
daylight width 280 mm
no. – centering rolls (vertical) 4 (2 x 2)
daylight width 265 mm
adjustment – centering rolls manually
no. – extracting rolls (inside stand) 4 (2 x 2)
brake unit
roller cage run out side

loop control frame construction with contact plate

control desk

documentation (electric) available date 2003

1988
Price  
  DE   request
124967953 1008

HAULOTTE STAR 10 Electric, Jib, 10m Working Height, Non mar for sale
Articulated Haulers


; Gross weight [kg]: 2575; Rear tyres remaining: 60; Front tyres remaining: 60; Maximum lift capacity [kg]: 200
used machine
 
; Gross weight [kg]: 2575; Rear tyres remaining: 60; Front tyres remaining: 60; Maximum lift capacity [kg]: 200
2009
11,500 €  
  NL   request
124946029 101

DONAU DR 23 for sale
High Speed Radial Borers


Schnellradiale used internal engine number: m2539 manufacturer Danube type DR 23 Ma. No. 2133-1 year 1975 table size 1000 x 600 mm projection 840 mm speed 17 to 1,550 RPM. Weight is 1.8 t with manual motor for the c ...
used machine
 
Schnellradiale used internal engine number: m2539 manufacturer Danube type DR 23 Ma. No. 2133-1 year 1975 table size 1000 x 600 mm projection 840 mm speed 17 to 1,550 RPM.
Weight is 1.8 t with manual motor for the clamp new hub and spindle motor new wrapped


Item location: 58730 Fröndenberg/Ruhr

The machine can be visited like to see power and tried out.

We will gladly send you more photos by E-Mail.

A forklift/crane for loading is available.

We reserve the right to a sale.

There is the way learned to examine suburb for sale articles. Specific questions should be clarified in advance. The information, technical data, dimensions, year, condition are non-binding and were shown to the best of my knowledge and belief. Errors are reserved. The warranty / guarantee is excluded. The goods will be sold from location / camp, with national transfer of risk to the buyer, this also applies to a shipping from us, which we have carried out on your behalf. This offer is only to traders, merchants and legal persons.
Specified trade names, and trademarks are property of their owners and are used only for identification and description of products.

The structure and the electrical connection of the machine / the device must be carried out by a qualified person trained or checked.

See also my other offers.

The article must be paid unless otherwise agreed within 14 days of invoice creation and picked up.
Otherwise, the cost of the storage charge must be made.
1975
5,400 €  
    request
124967955 1008

HAULOTTE STAR 10 Electric, Jib, 10m Working Height, Non mar for sale
Articulated Haulers


; Gross weight [kg]: 2760; Rear tyres remaining: 70; Front tyres remaining: 70; Maximum lift capacity [kg]: 230
used machine
 
; Gross weight [kg]: 2760; Rear tyres remaining: 70; Front tyres remaining: 70; Maximum lift capacity [kg]: 230
2009
11,500 €  
  NL   request
124946002 201

IRION for sale
Longitudinal circular saws


Longitudinal circular saws Irion Cutting length 6000 mm Cutting height 120 mm Electric feed L x W x H: 700 x 130 x 140 cm Weight 1700 kg Built in 1949 The machine is in good condition, ready to use. Subject ...
used machine
 
Longitudinal circular saws Irion

Cutting length 6000 mm
Cutting height 120 mm
Electric feed
L x W x H: 700 x 130 x 140 cm
Weight 1700 kg
Built in 1949

The machine is in good condition, ready to use.

Subject to changes, errors, prior sale!

Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden

MATEC system + technology GmbH
Mechanical engineering
Mill mat 4
CH-4952 Eriswil/Switzerland

Tel. 0041 62 966 18 32
Fax 0041 62 966 21 12
 
690 €  
    request
124967957 1008

HAULOTTE STAR 10 Electric, Jib, 10m Working Height, Non mar for sale
Articulated Haulers


; Gross weight [kg]: 2760; Rear tyres remaining: 70; Front tyres remaining: 70; Maximum lift capacity [kg]: 230
used machine
 
; Gross weight [kg]: 2760; Rear tyres remaining: 70; Front tyres remaining: 70; Maximum lift capacity [kg]: 230
2013
14,900 €  
  NL   request
124945959 104

WMW SU 240×800 for sale
Cylindrical Grinding Machine


%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% ATTENTION – SPECIAL OFFER UNTIL 30.06.2018 WE NEED ROOM FOR WAREHOUSE INSULATION SO OUR PRICES ARE CURRENTLY 25% OFF ! %%%%%%%%%%%%%%%%%%%%%%%%%%%%%% Hydr. Universal Cylindri ...
used machine
 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

ATTENTION – SPECIAL OFFER UNTIL 30.06.2018
WE NEED ROOM FOR WAREHOUSE INSULATION
SO OUR PRICES ARE CURRENTLY 25% OFF !

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%


Hydr. Universal Cylindrical Grinding Machine WMW SU 240×800

manufacturer: WMW SU 240×800
build type: Reinecker
type: SU 240×800
mach.-nr.: 02910
year of construction: ? / 2018 tüp.
comm.-nr.: 3990699/009
stock-nr.: 1865


+ Special Price: old 7.000,- € | now 5.250,- €
+ All prices are shown without taxes (net price)


The machine can be used for:

outer grinding
surface grinding
cone grinding
edge grinding
chamfering
plunge grinding


Technical Data

height of tip: 120 mm
swing – Ø: 240 mm
width of tip: 800 mm

grinding wheel:

diameter: 300 mm
bore diameter: 76 mm
max. width of full grinding wheel during punch-grinding: 50 mm
greates total width of grinding wheel set: 80 mm
greatest sum of single widths: 50 mm
grinding wheel speeds: 1.870 / 2.085 rpm

grinding head:

pivot of grinding head: 90° in two layers
max. grinding head hub: 295 mm
max hub using hand wheel: 200 mm
autom. interval feed, infinitely adjustable: 0,0025 – 0,04 mm
hand wheel feed: 0 – 0,8 mm
automatic feed: 0 – 0,8 mm
feed via one revolution of the hand wheel: 1,0 mm
feed via one hand wheel unit: 0,01 mm
rapid traverse of grinding head: 50 mm
max. diameter adjustment: 2,0 mm
diameter adjustment via tipping switch: 0,005 mm
diameter adjustment via micro-stop: 0,001 mm

headstock spindle:

4 workpiece speeds, adjustable: 50 – 400 rpm
rotatability of headstock spindle against the grinding wheel: 90°
spindle cone or inner cone of headstock spindle: MK 5

tailstock:

inner cone of quill: MK 3
quill way: 60 mm

table:

max. table tilt: 7° each
table speed, adjustable: 150 – 7.000 mm / min.
min. table travel using hydraulic movement approx.: 4 mm
table oscillation during plunge grinding: 3 – 5 mm
table adjustment via hand, fine: hand wheel unit = 0,03 / 1 hand wheel revolution 7,5 mm
table adjustment via hand, rough: hand wheel unit = 0,12 / 1 hand wheel revolution 29,5 mm

drive power: approx. 4,0 kW
weight: approx. 2.600 kg
standing area: W 2,20 x D 1,30 x H 1,40 m
color: blue / grey-white


features

manual or automatic operation
upper table for cone grinding with fine adjustment and dial gauge
automatic adjustment works as punch grinding adjustment, without adjustment,
table-dependent adjustment: # right # left and right # left only
rapid traverse infinitely adjustable
creep traverse infinitely adjustable
ejecting infinitely adjustable, can be disabled
tailstock can be activated mechanically by hand lever or hydraulically via foot switch
hydr. table oscillation
3 – B. – grinding padding Ø 200 mm, with inner and outer clamps (unused)
fixed prick punch MK3 + MK5
grinding stone puller, adjustable with diamond
second grinding wheel flange with unused grinding wheel 300 x 50 mm
wet-grinding equipment
machine light
operating manual


If the year of construction has a tuep.”-date, that means the machine has been electrically and technically inspected by us on that date.
If the year of construction has a tueb.”-date, that means the machine has been partially overhauled on that date according to the prior owner.
If the year of construction is marked ”, it is the information the prior owner relayed to us or our own estimation.
 
5,250 €  
    request
124967967 1513

GENIE IWP 20S Electric, 8.2m Working Height. for sale
Scissor lifts


; Gross weight [kg]: 802; Rear tyres remaining: 70; Front tyres remaining: 70; Maximum lift capacity [kg]: 160
used machine
 
; Gross weight [kg]: 802; Rear tyres remaining: 70; Front tyres remaining: 70; Maximum lift capacity [kg]: 160
2013
5,900 €  
  NL   request
124945908 1200

WELDED PIPE-27,5-76,1MM welded pipe-27,5-76,1mm for sale
Complete plant for the production of electro welded pipe tub


Complete plant for the production of electro welded pipe-27,5-76,1 mm Complete plant for the production of electro-welded pipe A complete plant for the production of electrically welded tubes with filling system for g ...

 
Complete plant for the production of electro welded pipe-27,5-76,1 mm
Complete plant for the production of electro-welded pipe
A complete plant for the production of electrically welded tubes
with filling system for galvanizing in welding
sheet processing
a series of forming rolls for diameters from 27.5 to 76.1 mm.
steel max. thickness 4 mm
numerical control machines
Production 80/120 mt/min.
complete line ETCF 55, COMPO282AS0013
75 metres long
2007 CE
current transformer, electrical panels, air compressor, etc. are present
EX WORKS!
not upstream
 
Price  
  PL   request
124967969 1513

GENIE Z34/22N Electric, 12.5m Working Height. for sale
Scissor lifts


; Gross weight [kg]: 5216; Rear tyres remaining: 40; Front tyres remaining: 40; Maximum lift capacity [kg]: 227
used machine
 
; Gross weight [kg]: 5216; Rear tyres remaining: 40; Front tyres remaining: 40; Maximum lift capacity [kg]: 227
2003
8,900 €  
  NL   request
124935975 401

AMPACK GMBH KF 2 / 4 S for sale
Cup filling machines and sealing machines


We have for sale a little used fully automatic Ampack KF 2 / 4 S cup filling and sealing machine for yoghurt. etc. The machine is a carrousel style and suitable for cups and small bottles. With the Ampack Rotary V ...
used machine
 
We have for sale a little used fully automatic Ampack KF 2 / 4 S cup
filling and sealing machine for yoghurt. etc.

The machine is a carrousel style and suitable for cups and small bottles.
With the Ampack Rotary Valve Dosing Station all products of liquid
and viscous consistency can be filled over the whole filling time without
any risk of contamination from the ambience.

Manufacturer: Ampack GmbH ( Germany )
Type: carrousel style KF 2/4 S
Version: Aseptic version
Machine no: 1.324
Year: 2005
Working hours: 1773 h
Control: PLC Siemens S7-400, touch screen
Dosing range: 80 ml - 275 ml
Dosing accurate: +/- 1,5 g / pump
Filling temperature: 5 - 65 degrees Celsius
Viscosity:
Size of fruit pieces ( without outlet nozzles ) dia 16 mm
Filling output for soja based yoghurt ( without snap-on lid ) at 8 x dia 75 mm cup
approx. 15.360 cups / h = 32 cycles / min.
Max output: approx. 16.320 cups / h = 34 cycles / min.
Cup format 1: 8 x dia 75 mm
Cup sterilisation: With vaporised H2O2 and sterile air
Lid sterilisation: With carbon radiator and vaporised H2O2
Pre-dosing station: Free space
Main:-dosing station: Cups: soja based set yoghurt, stirred yoghurt
with / without fruit, flavoured milk drinks
Snap-on-lid placing station for cups 8 x dia 75 mm
Cip cleaning: Yes

Packaging material bottles/cups
HDPE, PP, PET as well as paper/ PS, PP, PE as well as PET
Packaging material lids
Aluminum, PET as well as Coex/ multi-layer material etc.
Also the possibility to run bottles with the following bottle dimensions:
8 x 200 ml, Max. bottle height 140 mm, min. bottle height 80 mm,
max. bottle diameter 60 mm
Drive: Electrical / pneumatically
Compressed air pressure: 7 bar, 18 Nm3 / h
Power connection: 230 / 400 V, 50 Hz
Electrical heating for the cups: 22,5 kW
Sterile air volume: approx. 560 Nm3/h
Machine dimensions: Length 7 988 mm. width 1791 mm and height 3 000 mm
Weight: approx. 9 000 kg
The frame of the carousel filler is made of rigid, spray-galvanised structural steel.
Additionally the base frame is coated with a synthetic enamel. By this treatment it
becomes acid and alkaline resistant.

The base frame is provided with height adjustable stainless steel machine bolts
for the adjustment of the machine.
The automatic carousel filler is built according to the Ampack standard
machine specification and to the CE requirement and therefore has the CE-batch.

The machine is good working condition.


2005
Price  
  FI   request
124967990 1513

GENIE Z34/22N Electric, Jib, 12.5m Working Height, Non m for sale
Scissor lifts


; Gross weight [kg]: 5229; Maximum lift capacity [kg]: 227
used machine
 
; Gross weight [kg]: 5229; Maximum lift capacity [kg]: 227
1998
6,900 €  
  NL   request
124930139 204

ZIMMERMANN FZ PS 1/2 for sale
Profile grinding machines


Profile grinding machine used internal engine number: m2543 manufacturer Zimmermann FZ type PS 1/2 Ma. Number 866 year 1989 1,85 kW weight 400kg, with illustrated grinding rods 15, 30 and 40 mm pictured belts item locati ...
used machine
 
Profile grinding machine used internal engine number: m2543 manufacturer Zimmermann FZ type PS 1/2 Ma. Number 866 year 1989 1,85 kW weight 400kg, with illustrated grinding rods 15, 30 and 40 mm pictured belts item location: 58730 Fröndenberg/Ruhr

The machine can be visited like to see power and tried out.

We will gladly send you more photos by E-Mail.

A forklift/crane for loading is available.

We reserve the right to a sale.

There is the way learned to examine suburb for sale articles. Specific questions should be clarified in advance. The information, technical data, dimensions, year, condition are non-binding and were shown to the best of my knowledge and belief. Errors are reserved. The warranty / guarantee is excluded. The goods will be sold from location / camp, with national transfer of risk to the buyer, this also applies to a shipping from us, which we have carried out on your behalf. This offer is only to traders, merchants and legal persons.
Specified trade names, and trademarks are property of their owners and are used only for identification and description of products.

The structure and the electrical connection of the machine / the device must be carried out by a qualified person trained or checked.

See also my other offers.

The article must be paid unless otherwise agreed within 14 days of invoice creation and picked up.
Otherwise, the cost of the storage charge must be made.
1989
2,700 €  
    request
124967496 1005

HAULOTTE STAR 10 Electric, Jib, 10m Working Height, Non mar for sale
All terrain cranes


; Gross weight [kg]: 2760; Rear tyres remaining: 70; Front tyres remaining: 70; Maximum lift capacity [kg]: 230
used machine
 
; Gross weight [kg]: 2760; Rear tyres remaining: 70; Front tyres remaining: 70; Maximum lift capacity [kg]: 230
2012
13,900 €  
  NL   request
124930136 201

LANDONI AGM for sale
Portable electric sawig machine


Code: 0352 Brand: LANDONI Model: AGM - CE Standard Portable electric sawig machine for heading and dividing of packed boards and logs - CE Standard This pack cutter is also suitable for the cutting of rolls of pa ...

 
Code: 0352
Brand: LANDONI
Model: AGM - CE Standard

Portable electric sawig machine for heading and dividing of packed boards and logs - CE Standard
This pack cutter is also suitable for the cutting of rolls of paper with the specific Widia chain, and for the cutting of plastic blocks or tubes

echnical data:

Guide bar lenght cm 240
Useful cutting cm 200
Electric motor Hp 12,5 three-phase
Automatic oiling of the chain
Overall dimensions: mm 1600 x 900 x 3000 h
Dimensions for transport: mm 3600 x 900 x 1000 h
Weight kg 300
 
Price  
  IT   request
124967541 1513

Falck schmidt TS24 Self-Propelled, Electric, 23.8m for sale
Scissor lifts


; Gross weight [kg]: 3200; Rear tyres remaining: 40; Front tyres remaining: 40; Maximum lift capacity [kg]: 200
used machine
 
; Gross weight [kg]: 3200; Rear tyres remaining: 40; Front tyres remaining: 40; Maximum lift capacity [kg]: 200
1990
6,900 €  
  NL   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(18)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Find used machinery dealers in your country