We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Instruction manual is available.
used
Description: Serial number: P5076870 Pressing force: 15 to For further technical data see type plate With press protection grid Manufacturer: LEINHAAS weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,000 mm
used
Max. electrode force: 260kp, nominal output: 150kVA, connected load: 620kVA, weight: 1.1t.
used
Output: 3000l/h, pasteurizing process: flash pasteurizing.
used
* General * SKUR1232 * LocationBarneveld * MakeUetersener Eisenwerk (D) * TypeCHDI 12Q K48/40 PP * No.43090 * Year of construction1981 * Pressure * Working pressure4 Bar * Main Features * MaterialPolypropylene * Pressure4 Bar * Surface121 m2 * Specified Features - Filterpress * Filter presscheck * Filter surface121 m2 * Recessed chamber platescheck * Number of platens50+1 * Internal platen sizes1100x1100mm * External platen sizes1200x1200mm * Platen thickness70mm * Frame thickness18mm * With membranes on platensca. 19µm * Cake capacity2100 ltr * Central inletcheck * Hydraulic closingcheck * With hydraulic unitcheck * Automatic openingcheck * MaterialPolypropylene * Information * Total height2,3 M * Weight10000 Kg * Floorspace6,4x2,0 M * Extra SpecificationsIncluding frame with platform and :collection trayFilterpressesUetersen EisenwerkFilters > FilterpressesBrand > Uetersen Eisenwerk ...
used
Hydraulic single column press make HENSELER type PYE 6,3 x 200 SMachine -No: 136 built in 1969Compressive force: 6.3 tPressure force on: 3.5 tRam speed from: 120 mm / sec.Ram speed to: 220 mm / sec.Projection: 200 mmStroke: 315 mmPiston diameter: 80 mmInstallation height: 500 mmTable height: 800 mmTable surface: 380 x 420 mmTable hole: 100 mmPusher bore: 32 x 60 mmOil filling: 120 lOutside dimensions approx: 650 x 1100 x 2100 mmDrive power: 4.0 kWWith- Two-hand release- Press time adjustment- Pressure control- Hand lever operation- pneumatic hold-down- Speed control by hand lever in setup modeused, despite the year of construction in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your ...
used
pressure:015 t throat:200 mm stroke:4 - 70 mm no. of strokes:140 /min distance table/ram, max. stroke up, adjustment up:310 mm table surface area:430 x 395 mm hole in the table:165 x 160 mm table height over floor:560 - 735 mm table adjustable:175 mm ram surface:160 x 130 mm ram adjustment:80 mm power requirement:1,2 kW weight:0,9 t Dimensions (WxDxH):1,0 x 1,25 x 1,8 m clutch:Drehkeil overload protection in ram:mechanical
used
pressure:035 t throat:225 mm stroke:8 - 100 mm no. of strokes:110 /min distance table/ram, max. stroke up, adjustment up:400 mm table surface area:580 x 460 mm hole in the table:250 x 150 mm table height over floor:700 mm table adjustable:230 mm ram surface:355 x 120 mm ram adjustment:70 mm power requirement:2,2 kW weight:1,5 t dimensions (WxDxH):1,0 x 1,5 x 2,05 m clutch:rolling key overload protection in ram:mechanical
used
pressure:050 t throat:255 mm stroke:8 - 120 mm no. of strokes:115 /min distance table/ram, max. stroke up, adjustment up:380 mm table surface area:640 x 500 mm hole in the table:250 x 180 mm table height over floor:710 - 930 mm table adjustable:220 mm ram surface:550 x 170 mm ram adjustment:70 mm power requirement:4,0 kW weight:3,1 t dimensions (WxDxH):1,5 x 1,5 x 2,3 m
used
pressure:050 t throat:250 mm stroke:8 - 120 mm no. of strokes:100 /min distance table/ram, max. stroke up, adjustment up:400 mm table surface area:650 x 515 mm hole in the table:115 mm table height over floor:790 - 1020 mm table adjustable:230 mm ram surface:390 x 180 mm ram adjustment:70 mm power requirement:2,0 kW weight:2,6 t dimensions (WxDxH):1,1 x 1,4 x 2,2 m overload protection in ram:mechanical
used
Pressure:080 t throat:300 mm stroke:8 - 140 mm no. of strokes:60 / 90 /min distance table/ram, max. stroke up, adjustment up:420 mm table surface area:800 x 600 mm hole in the table:330 x 230 mm table adjustable:230 mm table height over floor:750 - 980 mm ram surface:600 x 240 mm ram adjustment:100 mm power capacity:4,5 / 6,9 kW Weight:5,5 t Dimensions (WxDxH):1,4 x 2,5 x 2,6 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic overload protection in ram:hydraulic
used
Pressure:035 t throat:225 mm stroke:8 - 100 mm no. of strokes:130 /min distance table/ram, max. stroke up, adjustment up:370 mm table surface area:580 x 450 mm hole in the table:210 x 170 mm table height over floor:700 mm ram surface:350 x 180 mm ram adjustment:70 mm power requirement:2,2 kW weight:2,2 t dimensions (WxDxH):1,0 x 1,8 x 2,2 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:hydraulic overload protection in ram:mechanical
used
Description: Serial number 38556, table surface approx. 3800 x 2100 mm, table can be tilted forwards, control with touch panel Approx. Onsite Dimension. (l x w x h): 7,000 x 5,000 x 3,500 mm, weight approx.: 5,000 kg
used
Description: Machine number 31701000, with 8 processing stations, surface processing, upper and lower edge processing each with 3 motors, clamping table approx. 3500 x 750 mm (The system has already been dismantled, completeness cannot be checked and guaranteed!) Approx. Onsite Dimension. (l x w x h): 11,000 x 2,400 x 2,700 mm, weight approx.: 6,000 kg
used
Description: Serial number 38557, table surface approx. 3500 x 1400 mm, with variably positionable vacuum suction cups, portal structure with manual processing spindle, spindle with infinitely variable speed, 10-fold tool changer (not automatic) Approx. Onsite Dimension. (l x w x h): 5,000 x 2,200 x 2,000 mm, weight approx.: 3,000 kg
used
Description: Machine number ST 37953 (The system has already been dismantled, completeness cannot be checked or guaranteed!) Approx. Onsite Dimension. (l x w x h): 26,000 x 2,900 x 2,800 mm, weight approx.: 8,000 kg
used
Description: Machine number 40577/4.500, water basin approx. 4200 x 2400 mm, KMT Streamline SL-V 30 CLASSIC C water pump, BKW cooling unit Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
used
Description: Machine number 40577/3.300, tool changer 46-fold, milling spindle 9.2 kW, X, Y, Z, C and A axes, machining table 2-fold rotating, worktop approx. 3500 x 1400 mm Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
used
Description: Natural and quartz stone sawing, position 1 tilting roller conveyor built in 2012, machine number 3810087, feeding of stone slabs, table length approx. 3000 mm, roller length approx. 1800 mm, feed roller conveyor stepped 24 m, position 2 sawing cell with water jet machine, loader built in 2014, machine number 40577/3.140, table approx. 3000 x 1700 mm, vacuum traverse with water jet head and router, external water basin approx. 3960 x 2300 mm, processing table approx. 6100 x 2380 mm, for sawing unit, swivelling sawing unit, vacuum lifting device, additional grooving saw unit, transfer area for vacuum traverse KMT STREAMLINE SL-V 30 CLASSIC C, high-pressure pump, position 3 sawing cell natural stone, loader year 2014, machine number 40577/4. 130, table approx. 3000 x 1700 mm, sawing unit portal, sawing table approx. 5600 x 3000 mm, additional grooving saw unit and underfloor c ...
used
Description: Machine number 40577/3.400, 3 processing units, clamping table approx. 3600, 9 material clamps Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
used
Description: Machine number 3835931402100, clamping table length approx. 3600 mm, 2 motors horizontal machining, 6 motors vertical machining, 3 motors each for top and bottom phase machining Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
used
Description: Machine number 3836131402200, clamping table length approx. 3600 mm, 2 motors for horizontal machining, 7 motors for vertical machining, 3 motors each for top and bottom machining phase Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
used
Description: Machine number 31703900, table top approx. 3500 x 1800 mm, 2 tool changers 10-fold, including tools and sawing unit Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
used
Description: Machine number 405774.400, machining table 2-fold rotating, table approx. 3500 x 1400 mm, main spindle 9.2 kW, tool changer 52-fold, axes X, Y, Z, C and A, GARANT workshop trolley with tools Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
used
Description: Machine number 38363, 5-axis machining, main spindle was dismantled after defect, replacement spindle in wooden box, table approx. 3800 x 2500 mm, 5 tool changers, up to 60 tool places Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg