british flag
Resale Logo

ETT used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information heavy construction machines  LBiz GmbH  http://www.eumaschinen.de 
banner logo
start page > keywords ETT > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125465373 103

HURON PU771 for sale
Bed Milling Machines


Universal Bed Millung machine HURON type PU 771 travels x y z 1900 x 1000 x 1000 mm Table size de 2230 x 700 mm Universal milling head Spindle SA 40 27 Spindle speed 30 to 2066 rpm with 2 Axis Dro Heidenhain
used machine
 
Universal Bed Millung machine HURON type PU 771
travels x y z 1900 x 1000 x 1000 mm
Table size de 2230 x 700 mm
Universal milling head Spindle SA 40
27 Spindle speed 30 to 2066 rpm
with 2 Axis Dro Heidenhain
1980
Price  
  FR   request
125460803 102

HARRISON M 450 for sale
Center Lathe


turning diameter over bed: 450 mmturning diameter over slide rest: 280 mmturning length: 1000 mmturning speeds: 40 - 2000 U/mincentre height: 225 mmspindle bore: 67 mmtailstock quill taper MT: 4 MKtotal power requirement ...

 
turning diameter over bed: 450 mm
turning diameter over slide rest: 280 mm
turning length: 1000 mm
turning speeds: 40 - 2000 U/min
centre height: 225 mm
spindle bore: 67 mm
tailstock quill taper MT: 4 MK
total power requirement: 7,5 kW
weight of the machine ca.: 1,7 t
Dimensions (LxWxH): 2,3 x 1,2 x 1,7 m
Center lathe with
- 3-jaw chuck F 315
- Fixed tailstock top
- Multifix holder
- 2-axis digital display
- Fixed Lynette 180 mm
- Coolant system
- rapid traverse



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125465367 112

HOFLER PRIMA H 1000 E for sale
Gear Grinding Machines


Gear max. wheel diameter 1000 mm gear width 530 mm max. module 18 min. module 1,5 max. number of teeth 195 min. wheel diameter 300 mm
used machine
 
Gear max. wheel diameter 1000 mm
gear width 530 mm
max. module 18
min. module 1,5
max. number of teeth 195
min. wheel diameter 300 mm
1994
Price  
  FR   request
125460805 102

GEMA LZ 185 for sale
Center Lathe


turning diameter over bed: 370 mmturning diameter over slide rest: 230 mmturning length: 700 mmturning speeds: 25 - 2000 U/mincentre height: 185 mmspindle bore: 40 mmtailstock quill taper MT: 3 MKtotal power requirement: ...

 
turning diameter over bed: 370 mm
turning diameter over slide rest: 230 mm
turning length: 700 mm
turning speeds: 25 - 2000 U/min
centre height: 185 mm
spindle bore: 40 mm
tailstock quill taper MT: 3 MK
total power requirement: 3,2 kW
weight of the machine ca.: 1,2 t
Dimensions (LxWxH): 1,85 x 0,8 x 1,5 m
Center lathe with
- 3-jaw chuck F 315
- Fixed tailstock top
- Multifix holder
- 2-axis digital display
- Fixed Lynette 180 mm
- Coolant system
- rapid traverse



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125465337 109

RESATO R - LCM 2040 - 1 for sale
Water Jet Cutting Systems


Water jet cutting machine manufacturer: Resato type: R-LCM 2040-1 year: 2007 hours of operation approximately 7,800 more data see data sheets in the folder. Contact person Mr. Mueller see also our over 200 more deals  ...
used machine
 
Water jet cutting machine manufacturer: Resato type: R-LCM 2040-1 year: 2007 hours of operation approximately 7,800 more data see data sheets in the folder.

Contact person Mr. Mueller see also our over 200 more deals at.

(Changes and errors in the technical data, information
and prices and subject to prior sale!)
2007
Price  
    request
125460811 102

GEMA LZ 185 for sale
Center Lathe


turning diameter over bed: 370 mmturning diameter over slide rest: 230 mmturning length: 700 mmturning speeds: 25 - 2000 U/mincentre height: 185 mmspindle bore: 40 mmtailstock quill taper MT: 3 MKtotal power requirement: ...

 
turning diameter over bed: 370 mm
turning diameter over slide rest: 230 mm
turning length: 700 mm
turning speeds: 25 - 2000 U/min
centre height: 185 mm
spindle bore: 40 mm
tailstock quill taper MT: 3 MK
total power requirement: 3,2 kW
weight of the machine ca.: 1,2 t
Dimensions (LxWxH): 1,85 x 0,8 x 1,5 m
Center lathe with
- 3-jaw chuck F 315
- Fixed tailstock top
- Multifix holder
- 2-axis digital display
- Fixed Lynette 180 mm
- Coolant system
- rapid traverse



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125465313 301

SUMITOMO JAPAN ( ELECTIRC SE130EV-C360HP for sale
Injection molding machines


WE HAVE SUMITOMO FULL ELECTRIC 130TON AS FOLLOWS INFORMATION. 1. MODEL: SE130EV-C360HP 2. Q'TY: 2 UNITS ( ONLY MACHINE ) 3. MFG.YEAR 2013 APR. 4. SCREW DIA. 25MM 5. ORIGINAL MACHINE NAME PLATE. PLS. CONTACT GJCHOI  ...
used machine
 
WE HAVE SUMITOMO FULL ELECTRIC 130TON AS FOLLOWS INFORMATION.
1. MODEL: SE130EV-C360HP
2. Q'TY: 2 UNITS ( ONLY MACHINE )
3. MFG.YEAR 2013 APR.
4. SCREW DIA. 25MM
5. ORIGINAL MACHINE NAME PLATE.
PLS. CONTACT GJCHOI OF GNB IN KOREA
2013
Price  
  KR   request
125460791 102

GILDEMEISTER CTX 400S2 for sale
CNC Lathe - Inclined Bed Type


turning diameter: 440 mmturning length: 635 mmcontrol: Heidenhain 4290 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mHeidenhain 4290 control inclusive TurnPlus3-jaw chuckc-axis ...
used machine
 
turning diameter: 440 mm
turning length: 635 mm
control: Heidenhain 4290
total power requirement: kW
weight of the machine ca.: t
dimensions of the machine ca.: m
Heidenhain 4290 control inclusive TurnPlus
3-jaw chuck
c-axis
driven tools
12 fold turret head
tailstock
chip conveyor

Technische Daten / technical details:
max. Umlauf-? über Bettbahnabdeckung / max. swing ? over bed 570 mm
max. Umlauf-? über Planführungsabdeckung / max. swing-? over sledge 420 mm
Planweg (x) / cross way (x) 220 Mm
Längsweg (z) / longitudinal way (z) 635 mm
Spindelbohrung / spindle hole 79 mm
Drehzahlbereich / spindle speed 25-5000 UpM /rpm
Werkzeugrevolver / turret head 12 fach /holes
Reitstockaufnahme / tail stock taper MK4
Eilgang X / rapid feed X 20 m/min
Eilgang Z / rapid feed Z 24 m/min.
Antriebsleistung Spindel 100%ED / drive capacity spindle 100%ED 21 kW
Gewicht der Maschine ca. / weight 5700 kg
Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
Technical data, accessories and description of the machine are not binding.





This ad was created with MODUL MWS - the software solution of LogoTech.
2001
Price  
    request
125465306 2419

SPEZIALKRAFTWAGEN N1) VW Hochraum-Kasten Allrad for sale


last off Code: BH-70539 Matriculation year: 26.09.1989 elapsed. Mileage: 82.060 km Output: 51 kW Displacement: 1,588 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a,  ...

 
last off Code: BH-70539
Matriculation year: 26.09.1989
elapsed. Mileage: 82.060 km
Output: 51 kW
Displacement: 1,588 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: 251/4WD bra
FIN: WV2ZZZ25ZLG114504
Equity / total weight: 2,060/2,600 kg
Color: Green
Construction: closed
Number of seats: 3
Equipment: material equipment, cassette player, 4-speed manual transmission, all-wheel drive
Documentation: types of licence available
Key: 1
Comments on the condition: engine oil loss, exhaust manifold and gasket defective, gearbox leaking, clutch on the wear limit, intermediate gear leaking axle parts div. porous suspension rubbers, rear wheel bearing play, brake rusted, front discs and pads damaged, partially rusted brake line, steering gear easily leak, starter broken, heating and fresh air controller Anrostungen in frame, fenders and shock absorbers, rust spots at windscreen dawned, front left, differences in colour varnish, div. prov. Repainting, sticker residue, is pointed out explicitly that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-300-0132 and 2320-0-550-0083
 
Price  
    request
125460780 206

S+S Super for sale
Frame press


Working width: 4500 mmWorking height: 2500 mmNumber of cylinders: 6 St.Dimensions (L/W/H): 6.400 x 1.850 x 3.650 mmWeight: 3.500 kgElectrohydraulic frame presser S + S Superwith automatic adjustmentCE versionFrame press  ...

 
Working width: 4500 mm
Working height: 2500 mm
Number of cylinders: 6 St.
Dimensions (L/W/H): 6.400 x 1.850 x 3.650 mm
Weight: 3.500 kg
Electrohydraulic frame presser S + S Super
with automatic adjustment

CE version

Frame press machine with 2 pieces movable presses, complete with 8 pieces
Holding cylinder for fixing frame parts, as well as with motor protection and
Control circuit breaker.

Size adjustment by optical length detection for height and width.

Working length x width: 4500 x 2500 mm

Rotating beam light curtain OTD 3

Medium pressure bar with automatic adjustment in height
up to 2500 mm high

Single pressure control for medium pressure bars

Cross-pressure device for pressing cross-bar window

Single pressure control for cross-pressure device

A triangle studio window crimping apparatus comprising:

Locking device of the vertical pressure beam
-3 push-on side-mounted pendulum pressure plates and regulators,
Central drive with single, pneumatic decoupling of the
Vertical pressure cylinder
(thereby independent of each other is the setting in any
Working height)


electrical hand control

Double pendulum plate

2 pendulum printing plates with extension (for triangular window triangle)


(Techn. Description according to manufacturer - without guarantee!)



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125456377 821

AGFA Palladio platesetter with proc for sale
CTP Systems (2-up)


Palladio plate setter with processor built in 2003 With LP 82 Lithostar ultra very well preserved and little used more info follows. The machine is located in Iran visit is possible any time
used machine
 
Palladio plate setter with processor built in 2003
With LP 82 Lithostar ultra

very well preserved and little used
more info follows. The machine is located in Iran visit is possible any time
2003
Price  
    request
125460495 205

HOMAG OPTIMAT BAZ 211/VENTURE 20 for sale
CNC Machining Centre


serial number: 0-201-21-6004 Weight approx.: 6000 kgcontrol: Power Control PC 85 Dimensions (l x w x h) approx.: 12000 x 2500 x 2400 mmc-axis: mit Aggregateschnittstelle setting measure approx (l x w x h): 6000 x 4250  ...
used machine
 
serial number: 0-201-21-6004
Weight approx.: 6000 kg
control: Power Control PC 85
Dimensions (l x w x h) approx.: 12000 x 2500 x 2400 mm
c-axis: mit Aggregateschnittstelle
setting measure approx (l x w x h): 6000 x 4250 x 2900 mm
software: WOODWOP inkl. Postprozessor
working length x-axis: 3050 mm
working width y-axis: 1220 mm
working height y-axis: bei Standardspanner 60 mm
main spindle: HSK F63 11 kW
tool changer: 12 fach
vacuum pump: Wassering 66 cbm/h
drilling head vertical x-axis: 11 piece
drilling head vertical y-axis: 7 piece
drilling head horizontal x-axis: 2 piece
drilling head horizontal y-axis: 2 piece
edge gluing unit: no / nein
path-feed rate max. X-axis: 80 m/min
path-feed rate max. Y-axis: 80 m/min
path-feed rate max. Z-axis: 30 m/min
Description: Machine number 0-201-21-6004
2007
used machinery auction RESALE 26,000 €  
  DE   request
125452400 301

SANDRETTO NOVE HPF 3600 / 2480 for sale
Injection molding machines


2007
Price  
  AG   request
125460572 102

GILDEMEISTER NEF 520 K for sale
Teach-In Lathe


Weight approx.: 2650 kgDimensions (l x w x h) approx.: 0x0x0 mmDescription: FAMOT NEF 520 K Teach-In Lathe - S/N: 0522000059A - working hours: 14880 h - Distance between centers/max. turning length: 1000 mm - cross trav ...
used machine
 
Weight approx.: 2650 kg
Dimensions (l x w x h) approx.: 0x0x0 mm
Description: FAMOT NEF 520 K Teach-In Lathe

- S/N: 0522000059A
- working hours: 14880 h
- Distance between centers/max. turning length: 1000 mm
- cross travel: 260 mm
- swing diameter over bed slide / over cross slide: 500/290 mm
- RPM: 1. gear stage 8-750 U/min / 2. gear stage 32-3000 U/min

- basic machine with digital drives and electrical panel from Siemens
- double-stage gear box and electrical handwheel
- tool holder Multifix Gr. B
- power required 3x400 V ? 50 Hz
- No accessories included in scope of supply!
- machine has operational wearing
- touch panel of user interface ist functional reliable! The choices are selected by mouse

transport dimensions
- machine on planks: 3,0m x 1,7m x1,65m
- 1 palette: 1,3m x 1,16m x 0,48m
2003
used machinery auction RESALE 6,000 €  
  DE   request
125452375 107

CAMU for sale
Cutting-To-Length Lines


Band width max. / strip width max.: 1,650 mm Band thickness steel/strip thickness steel: 0.4-2.0 mm Band thickness ALU/strip thickness steel aluminium: 0.4-3, 0 mm Coil weight Max/coil max weight: 20,000 kg Coil insi ...
used machine
 
Band width max. / strip width max.: 1,650 mm
Band thickness steel/strip thickness steel: 0.4-2.0 mm
Band thickness ALU/strip thickness steel aluminium: 0.4-3, 0 mm
Coil weight Max/coil max weight: 20,000 kg
Coil inside diameter/coil inner dia.: 508/610 mm
Coil outer diameter Max/coil out slide. Max: 1800 mm
Setting rollers number/no. of straightening rolls: 17 St. / no.
Version: 4 high
Dimensions/dimension: 30x6m

The system has worked with aluminum / line what working with aluminum.
2002
Price  
    request
125460575 109

DECKEL DE 25-C for sale
Die Sinking EDM Machine


Weight approx.: 4000 kgx-travel: 500 mmy-travel: 350 mmcontrol: Multiform 2 Dimensions (l x w x h) approx.: 0x0x0 mmz-travel: 350 mmDescription: DECKEL DE 25-C Die Sinking EDM Machine - S/N: 0481-0203 - working hours:  ...
used machine
 
Weight approx.: 4000 kg
x-travel: 500 mm
y-travel: 350 mm
control: Multiform 2
Dimensions (l x w x h) approx.: 0x0x0 mm
z-travel: 350 mm
Description: DECKEL DE 25-C Die Sinking EDM Machine
- S/N: 0481-0203
- working hours: 57095 h
- control-type: G45-25
- control: Multiform 2 (1997 upgraded to Multiform 4
- working tank retractable - dielectric demand: ca.200 l
- max. workpiece dimensions: ca. 650x450 mm
- max. workpice weight: 500 kg
- dielectric over table: 0-300 mm
- max. workpiece height: 260 mm
- colour RAL 6011
- Distance table- quill without collet chuck min./max.: 250 ? 600 mm
- electrode changer for 16 electrodes
- C-axis
- quill chuck: 3R Ø20 - fire-extinguishing installation type Kraft &, Bauer(no CE-declaration of conformity for the extinguishing system available), next system-check 04/2018)

- operational wearing
- no CE-declaration of conformity for the machine available) vor

transport dimensions
- machine incl. electric cabinet on palett L/W/H: 2,7m x 2,25m x2,85m The maschine has to be loaded on truck sideways by forklift on a pallet
- 1 dielectric tank: 1,4m x 1,3m x 1,16m
1986
used machinery auction RESALE 600 €  
  DE   request
125452364 107

SCHNUTZ RMH 18/40/23-2000 Z for sale
Straighteners


Yield strength (0.2) Max/tensile strength (0.2) Max: 400 N / mm² Band thickness/strip thickness: (0.3)... 0.4... 2.0 mm Setting rollers number/no. of straightening rolls: 23 St. / no. Reel diameter/dia.of  ...
used machine
 
Yield strength (0.2) Max/tensile strength (0.2) Max: 400 N / mm²
Band thickness/strip thickness: (0.3)... 0.4... 2.0 mm
Setting rollers number/no. of straightening rolls: 23 St. / no.
Reel diameter/dia.of straightening rolls: 40 mm
Bale length setting rollers/body length straightening rolls: 2,235 mm
Number of intermediate rollers / no. of intermediated-rolls: 25 PCs / no.
Bale length intermediate rolls / body length intermediated rolls: 2,140 mm
In outriggers, hydr. adjustable/lower support hydr. adjustable: 9 St. / no.
Upper braces fix. / upper support fix.: 9 St. / no.
Number of track rollers/no. support of rolls: 243 St. / no.
Support rollers diameter/slide. support of rolls: 41 mm
Bale length support rollers/body length support rolls: 128 mm
Speed Max / max speed: 60m / min
Total weight/complete weigth: 13.2000 kg

High-band straightening machine / high production-strip leveling machine
Machine without electrical / machine withourt electric material:
Cold-rolled steel, varnished, plastic-coated, electrolytic and hot-dip galvanized
Surface, aluminium / CU / Zn/stainless steel / /.
steel cold rolled, painted, PVC-coated, galvanised surface, Al / Cu / Zn/inox
2002
Price  
    request
125460585 104

VEB SETTr for sale
Double Grinder Bench


Weight approx.: 65 kgDimensions (l x w x h) approx.: 550 x 300 x 1200 mmDescription: Grinding disc diameter max. 200 mm, width 32 mm, speed 3000 rpm, on machine stand

 
Weight approx.: 65 kg
Dimensions (l x w x h) approx.: 550 x 300 x 1200 mm
Description: Grinding disc diameter max. 200 mm, width 32 mm, speed 3000 rpm, on machine stand
 
used machinery auction RESALE 65 €  
  DE   request
125452343 301

SANDRETTO NOVE S 165-650 for sale
Injection Moulding Machine


2004
Price  
  AG   request
125457117 102

MORI SEIKI NTX 1000/SZM for sale
CNC Turning- and Milling Center


turning diameter:370 mmturning length:424 mmcontrol:MSX 711 Mapps IV Travel turret No.1 (milling spindle) x/y/z:380 / 210 / 460 (+155) mmSwivel range Turret No. 1 (milling spindle) B-axis:+-120.000 x 0,001 °Travel x/z t ...
used machine
 
turning diameter:370 mm
turning length:424 mm
control:MSX 711 Mapps IV
Travel turret No.1 (milling spindle) x/y/z:380 / 210 / 460 (+155) mm
Swivel range Turret No. 1 (milling spindle) B-axis:+-120.000 x 0,001 °
Travel x/z turret 2:155 / 610 mm
Rapid traverse feeds turret 1 (milling head) x/y/z:40/40/50 m/min
Rapid traverse feeds x/z turret 2: m/min
RPM milling spindle:12000 1/min
power capacity - milling spindle:9 / 5,5 kW
Torque of milling spindle:120 / 44 Nm
tool taper milling spindle:Coromant Capto C5
Tool magazine for milling spindle (turret 1):38
Tool change time tool/tool, milling spindle:1,6 s
Turret No.2 stations / rotary tools:10 / 0
Spindle 1 RPM:5000 1/min
Spindle 1 Power:11 / 11 / 7,5 kW
Torque Spindle 1:223/158 Nm
C-axis spindle 1:0,001 °
Bar capacity spindle 1:65 mm
Spindle 2 RPM:6000 1/min
Spindle 2 power:7,5 / 5,5 kW
Torque Spindle 2: Nm
C-axis spindle 2:0,001 °
Parts and total counter:
swing diameter max. over bed cover:730 mm
total power requirement:45 kVA
weight of the machine ca.:8,5 t
dimensions of the machine ca.:6 x 2,7 x 2,4 m
Collet chuck max. ID. spindle 1:Unilock 65 (Hainbuch System) mm
Collet chuck max. ID Spindle 2:Unilock 65 (Hainbuch System) mm
Polygon turning option:
High speed canned cykles for easy programming:
Turret 2 high pressure coolant 20 bar: kW
tool holder:30 x Capte C 5
tool holder:9 x for lower turret
Chip conveyor:
tool setting:
spindle load monitor:
Airblow system:
Interface for coolant through the spindle:
Coolant through spindle 70 bar with filter:SEI International
Coolant cooling system:
Parts catcher:Subspindle
Conveyor for partsdisposal:
Parts and total counter:
Ethernet I/P Interface:
Signal lamp 3 colors:
Barfeeder Interface:
Bar feeder magazine:TOP Automazioni X-Files S 365 P
Spindle 1 Chuck:Kitagawa BB208
Spindle 2 Chuck:Kitagawa B 208
Air Filter:
Hobbing option:
Linear scale x1,y1 and z1-axis:

High performance turning and milling center with multi axis milling head, 38 tool magazine Capto C5, additional lower turret with 10 rotary tool stations, main- and sub spindle, and multi layer bar feeder magazine TOP Automationi X_Files S 365 P for bar diameter of max. 65 mm. The machine is almost as new with about 4500 power on hrs.
2015
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More ETT models (2 or more machines):
ETT A 862 – HL (2)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

HEIDELBERG SM52-2


D235 HEIDELBERG SM52-2 (Year 1997) Alcolor dampening / Autoplate / Automatic wash-up equipment / Automatic size setting from feeder / App. 35 mio. Impressions Machine is in very good working condition. Available: Immediately

Turning Machines (Lathes) DMG MORI NLX 2500/500


OVERVIEW: Brand: DMG MORI Model: NLX 2500/500 Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 2014 Production hours: 3171 Location: Hungary Origin country: Japan GENERAL DATA: Measurements width: 2200 mm Measurements depth: 1900 mm Measurements height: 1826 mm Machine weight: 4200 kg MAIN DRIVE: Number of spindles: 1 Spindle speed range: 4000 1/min CONTROL UNIT: Brand: DMG MORI ERGOLINE Model: CELOS MAIN DRIVE: X-AXIS movement: 260 mm Z-AXIS movement: 500 mm TURRET: Number of turrets: 1 ADDITIONAL EQUIPMENT: 1 - Power transformer 2 - Tool setter

Grid production line MASZYNY S.C. LS 6/4


Line for manufacturing of grid forest MACHINE S.C. LS 6/4 was produced in 2006. Characteristic parameters of the line to the netting machine S.C. LS 6/4: -ability to produce L-type grids; M; S Construction grid for type "L": -on the machine so far carried out configurations: 150/14/15 L; 160/20/15 L; 160/23/15 L; 180/20/15 L; 180/23/15 L -wires: fi. 2.0 mm/1.6 mm -maximum height: H = 200 cm The design of the grid for the type "M": -on the machine so far carried out configurations: 120/13/30 M; 120/13/15 M; 160/15/15 M; 160/15/30 M; 160/20/15 m; 160/20/30 m; 160/23/15 m; 160/23/30; 200/17/30 m; 200/17/15 m; 200/22/15 m; 200/22/30; 200/25/15 m; 200/25/30 m -wires: fi. 2.5 mm/2.0 mm -maximum height: H = 200 cm Construction grid for type "S": -on the machine so far carried out configurations: 120/13/15 S; 200/17/15 S; 200/20/15 S; 200/22/15 S; -wires: fi. 3.0 mm/2.5 mm -maximum height: H = 200 cm-capacity: depends on the type of mesh-medium: 4 rolls/h -the line is complete: the machine, line-construction growing, bucks on vertebrae wire snap-in-staple gun (binding end of the grid to roll), compressor

Eccentric Presses TOMA LEN 63C


Eccentric press TOM LEN 63 c was produced in 2012. The machine allows to realize punching, cutting and punching. The press can work with different instruments. It is also possible to full automation of the work by arming its tape dispenser. Technical parameters of the presses LEN 63 C: -clamping force: 63 tons -table size: 800 x 630 mm -the surface of the slider: 450 x 280 mm -outreach: 315 mm -the number of jumps in: 65/130 min. -number of jumping manual work: 45/50 min. -adjust the pitch slider: 10-105 mm -the self-alignment capacity of slider: 70 mm -ground clearance table-slider: 335 mm -the ground clearance between columns: 355 mm -quantity: 2 -engine: 730/1440 min. -engine power: 4/7.5 kW -overall dimensions: 1425 x 1790 x 2550 mm -weight of the machine: 5850 kg Advantages of the press TOM LEN 63 C: -die-cast housing: grey cast iron -the possibility of setting the size of the pitch slider -the possibility of repositioning the slider -pneumatic balancing slider -accurate, extended, self-lubricating guiding slider -eccentric shaft fit rolling rod -molded friction clutch: brake, meeting the requirements of the provisions of safety at work

Hob milling machines POREBA ZFA 75


POREBA enveloping machine ZFA 75 was produced in 1967 by Mechanical Factory "MUNICH". The machine is designed for the production of gears with straight, oblique teeth and worm gears. During operation without a steady handle, it allows for machining wheels with a maximum diameter of 800 mm, and when working with a steady support, the maximum diameter of the wheel is 450 mm. Technical date: The largest cut-out module: -normally: 6 mm -with reduced accuracy: 8 mm The largest diameter of the gear being machined: -with the support fixed: 450 mm -without a steady: 800 mm The largest diameter of a toothed wheel work with helical teeth: -at a helix angle of 30 °: 500 mm -at a helix angle of 60 °: 190 mm The largest milling length for straight teeth: 275 mm Range of distances between the workpiece the axes and the milling cutter: -the smallest 30 mm -the largest 500 mm Vertical milling cutter: 310 mm The smallest distance from the table surface to the milling cutter axis: 200 mm The largest diameter of the milling cutter: 120 mm Diameter of mandrels for setting the cutters: 22, 27, 32 mm Diameter of the hole on the table: 80 mm The number of spindles of the milling spindle: 7 Range of rotation of the milling spindle: 47.5-192 Vertical cutter range for 1 turn of the workpiece: 0.5-3 mm The range of radial feeds of the milling cutter for 1 turn of the workpiece: 0.1-1 mm The range of axial feeds of the milling cutter for 1 turn of the workpiece: 0.25-1 mm Main engine power: 2.8 kW Machine dimensions: 2395 x 1210 x 1975 mm Milling weight: 3800 kg Equipment: -a set of shift wheels for the guitar -change tires/wheels for the second guitar: 7 pcs. -spindles: 5 items -conical wheels: 2 pcs -claw coupling -tests: 5 items -hook key -DTR-technical and operational documentation It is possible to buy additional equipment of the machine, i.e.: -modular cutters with various modules, from 1-8:100 pieces (additional fee, price: $9990 net, visible in the last two photos)

Monarch-Scalvos Protti good models excellent conditio


MAJOR TEXTILE Knitting PLANT LIQUIDATION (Please your intrest with confirmed target price immedaitely) KNITTING 12 Monarch FIL 8AEQ, 30", 4-18 cut, 8-24 cut, 84 feed 2 Monarch FIL 8AEQ, 30", 18 cut, 84 feed, 50 % lycra 10 Monarch FIM 108A, 30", 24 cut, 108 feed 1 Monarch FDR Rib, 26", 14 cut, 52 feed 3 Monarch Rib, 26", 14 cut, 52 feed, Lycra 1 Monarch Rib, 20", 14 cut, 40 feed 1 Monarch SEC Electronic Striper, 30", 16 cut, 36 feed 6 Monarch FXC4S, 30', 20 cut, 122 feed 4 Monarch RACE, 30", 28 cut, 122 cut 1 Monarch STEP JACK, 30", 20 cut, 72 feed 14 Monarch RXDF, 30", 122 feed, 3-24 cut, 6-22 cut, 5-18 cut, 24 Monarch RX4S, 26", 104 fd, 2-28 cut, 4-24 cut, 9-18 cut, 9-22 cut, 7 Monarch FXC 4S, 26", 20 cut, 104 fd. 6 Monarch RX4S, 26", 20 cut, 104 fd. 8 Monarch RX WSY Striper, 30", 48 feed, 5-16 cut, 1-18 cut, 1-28 cut FLAT KNITTING 2 Protti PV94 Doublelock, 240 cm, 12 gauge 6 Protti PT222, 213 cm, 12 cut 9 Protti PT242 Jacquard, 218 cm, 12 cut 35 Stoll JBOMB, 150 cm, 160 cm & 180 cm, 12 gauge DYEING 1 Gaston Jet Dye, 80 lb., 1996, M6000 Controller 4 Sclavos Jet Dye, Venus HT3, 3 port, 1000 lbs., 50 PSI, 1999, updated Recore controls, 2014-15 3 Gaston Futura, 2 port, 1000 lbs., 53 psi, Barco controls, 1987 1 Gaston Futura Jet Dye, single tube, 160 lbs,, 1992, M3000 controller 4 Recore Dye Machine Controllers, 2012-14 6 Then Airflow, 1200 lbs., 3 strand/3 ports, 1988 1 Then Airflow, 400 lbs., 1 port, 1987 3 Arganthan Jet Dye, 80 lbs. each, 60 PSI, 1982-80 1 Arganthan Jet Dye, 400 lbs., 60 PSI, 1982 11 Arganthan Jet Dye, 4 ports, 1000 lbs., 60 PSI, 1980 7 Gaston 824 Jet Dye, 5-3 port, 2-2 port 200 Stainless Mixing Tanks with mixers, 50 to 250 gal. 200 Dyehouse Trucks, 72" x 42" wide x 35" dp. FINISHING 1 Santex Santastrech Plus 120, 48" wide, 120 cm, balloon extractor, 5 to 60 YPM, 1994 1 Santex SANTASHRINK Dryer, 220 cm wide, with pin tenter entry, 1994, 6K/220 Gas IR SRS + SPR+FOUL+CUT, gas fired, 6 chambers, 2400 lbs./hour evaporation capacity, 6.1 mil BTU/HR 1 TubeTex Dryer #6 gas fired drum, entry with 3- Fabcon Padders 1 Bianco Slitter, 86" wide, Bianco slitter head (updated 2015), rope squeeze, detwister, folder, stainless steel 1 Bianco Slitter, 86" wide, opener and detwister, 2 scrolled rolls, flat folder 1 Stentex Tenter Stentotherm 3300, 1995, 2400 mm max. working width, unwind, J box, Dogal uncurler, 2 Santex Padders, 102" wide, Bianco Weft Straightner, E & L guiders, low profile gas fired 12 zones, 1 Krantz Syncro Shrink Conveyor Dryer, 100" wide belt 2 Famatex Tenter #1 & #2 3 Tube Tex Drum Dryers, 48" wide & 72" wide 1 Fabcon Drum Dryer, 8 zone 5 Tubular Inspection machines 6 6 Fabcon Tubular Gullwing Tubular Compactors, 52" wide Fabcon & Tubetex Tubular Calendars, 50" & 60" wide 1 Argathen Bleach Range, 10 section, 2200 lbs. hour. 1 Jemco Bleach Range, Model III 2000 CBR, 2,000 lbs. hour, 1995 1 Curtis & Marble, plastic roll wrapping 1 Bespoke Dye Mixing System, Year 2000, 16 pumps, 2 Model SRD Exact Weigh liquid chemical collecting, mixing, batch weighing, 2 IR dual head centrifugal pump, Mettler intergrated scale 1 Tube Tex, drum dryer 1999, with 3 Tube Tex tubular padders 1 1 Monforts Knitgoods Toptex 92" wide, open width rubber belt compactor, Kombi Batcher, steam heated main cylinder, 1990 Fabcon Open Pin Tenter, 90" wide x 20' long, steaming section, batcher 1 LABORATORY: Raitech Quickwash, DataColor 500, Milnor Washer, Huebsch Dryer 50 lb., PLUS MANY MORE ITEMS 25 Merrow Sewing Machines, with table and motor 2 Gardner Denver Air Compressor, 60 HP 1 Gardner Denver Air Compressor, 200 HP 3 Ingersoll-Rand Screw Compressor, 2- 250 HP, 1-150 HP 3 Propane Storage Tanks, 30,000 gallon, with mixer 4 Stainless Steel Outside Tanks, 6000 gal to 10,000 gal. 3 Waste Balers, vertical style 2 Cleaver Brooks Package Boilers, 800 HP, 1988 + 1989, dearator system PLEASE CONTACT US FOR FURTHER INFORMATION .

Eccentric Presses ZAMECH PMS 160 A


Eccentric press ZAMECH PMS 160 and produced in 1965 by Zamech-. Characteristics of the press PMS 160 and: -nominal pressure: 160 t -table dimensions: 1140 x 760 mm -thickness: 125 mm -the diameter of the hole in the table: 490/450 mm-diameter hole in the plate: 250 mm -diameter of the socket in a slider: 50 mm -the ground clearance between the walls of the body: 840 mm -adjustable slider jump in gran. : 20-140 mm -the nominal quantity: 40 1/min -outreach to table height: 400 mm -the largest distance between the table and the slider, with the largest jump the slider in the upper position and first engages a: 580 mm -the distance between the table and the guides: 585 mm -the self-alignment capacity of slider in the direction of the axis: 120 mm -electric motor: main: 10 kW, for setting the slider: 1.1 kW -the turnover of the main electric motor: 1420 RPM -the power of air pressure ejector 5.4 atm.: 16000 kG -the biggest jump ejector: 75 mm -indicative cooling air flow: 1.3 Nm3/min -the air pressure in the odci??aczach: 4.8 atm. -maximum air pressure in wyrzutniku: 5.7 atm. -nominal air pressure in the clutch: 4.5 atm. -the weight of the ejector: ok. 400 kg -the weight of the press without ejector: ok. 14100 kg -overall dimensions: 2000 x 2325 x 3390 mm

Transfer Presses ( 2 - 4 Columns) KRUPP PST-A 160


Transfer press KRUPP PST-and 160 built in 1980. Technical data of the press KRUPP PST-and 160: -nominal pressure: 160 tons -cutting force degree 1:400 KN -clamping force between uprights: 1200 KN -the number of stages including the cutting level: 11 -the distance between uprights: 200 mm -pitch slider: 210 mm -drawing depth: 70 mm -the amount of jumping, infinitely adjustable: 15-75/min. -production range jumping from repeatability of its settings: 25-75/min. -number of jumping motion Setup: 15-25/min. -wykorzystywalny resource work per stroke in terms of 25-75 strokes per min.: 20000 J -maximum load single degree: 500 KN -the maximum load of a single degree by using the inserts: 630 KN -the maximum tape width: ok. 340 mm -the maximum cut-out diameter: 120 mm -the minimum cut-out diameter: 30 mm -the distance between uprights: 2450 mm -the height of the built-in tools in the lower position of the slider and its regulations (the space between the table and the imakami of the upper toolbar): 470 mm -the height of the surface transport extrusions over a dining table: 270 mm -height adjustment tool blocks: 40 mm -table clamping surface (width x depth): 2000 x 700 mm -adjustable spacing between the slats podajacymi: 210 +-300 mm -stroke closing slats which indicate for each terminal: 75 mm The progressive press wielooperacyjna KRUPP PST-and 160/11/200/210 is connected and can be checked on the move.

CNC Laser Cutting Machines Trumpf TruMatic 3000 fiber (K04)


OVERVIEW: Brand: Trumpf Model: TruMatic 3000 fiber (K04) Application type: Laser Cutting Machine type: Laser Punch Combination Machine Availability: September Construction year: 2011 Production hours: 34000 Laser hours: 33000 Location: Spain MAIN DRIVE: Laser power: 3000 kW Punching force: 165 kN CONTROL UNIT: Brand: Siemens MOVEMENT: X-AXIS: Movement: 2500 mm Y-AXIS: Movement: 1250 mm WORKPIECE: Workpiece weight: 120 kg MAX MATERIAL THICKNESS: Steel: 4 mm ADDITIONAL EQUIPMENT: 1 - MultiTool function 2 - MultiBend function 3 - Thread shaped function 4 - Fast marking / grooving function 5 - Function roller technology and deburring 6 - Additional clamping claw 7 - Repositioning cylinder with moving parts in height 8 - Small parts sensor for ramp evacuation 9 - Mounting on mattress 10 - Chip conveyor with folding tank 11 - Deformed sheet metal detection 12 - Teleservice via and modem 13 - SheetMaster (2500 x 1250) 14 - Off / Load parallel to the main time 15 - Sheet separation system incl. Positioning help for medium format (2500 x 1250) 16 - Suction cup frame 17 - Disp. Load control 18 - GripMaster (2500 x 1250) 19 - SortMaster Pallet (6 transversal Pallets x = 1200 mm, y = 800 mm) 20 - Double trolley load incl. connection with warehouse 21 - 18 RTC cassettes incl. Matrix plate 22 - QuickSet 23 - Conveyor belt parts 24 - TruTops Punch License 25 - Includes € 40,000 in tooling

Laser Cutting Machines Trumpf TruMatic 3000 fiber (K04)


OVERVIEW: Brand: Trumpf Model: TruMatic 3000 fiber (K04) Application type: Laser Cutting Machine type: Laser Punch Combination Machine Availability: September Construction year: 2011 Production hours: 34000 Laser hours: 33000 Location: Spain MAIN DRIVE: Laser power: 3000 kW Punching force: 165 kN CONTROL UNIT: Brand: Siemens MOVEMENT: X-AXIS: Movement: 2500 mm Y-AXIS: Movement: 1250 mm WORKPIECE: Workpiece weight: 120 kg MAX MATERIAL THICKNESS: Steel: 4 mm ADDITIONAL EQUIPMENT: 1 - MultiTool function 2 - MultiBend function 3 - Thread shaped function 4 - Fast marking / grooving function 5 - Function roller technology and deburring 6 - Additional clamping claw 7 - Repositioning cylinder with moving parts in height 8 - Small parts sensor for ramp evacuation 9 - Mounting on mattress 10 - Chip conveyor with folding tank 11 - Deformed sheet metal detection 12 - Teleservice via and modem 13 - SheetMaster (2500 x 1250) 14 - Off / Load parallel to the main time 15 - Sheet separation system incl. Positioning help for medium format (2500 x 1250) 16 - Suction cup frame 17 - Disp. Load control 18 - GripMaster (2500 x 1250) 19 - SortMaster Pallet (6 transversal Pallets x = 1200 mm, y = 800 mm) 20 - Double trolley load incl. connection with warehouse 21 - 18 RTC cassettes incl. Matrix plate 22 - QuickSet 23 - Conveyor belt parts 24 - TruTops Punch License 25 - Includes € 40,000 in tooling

Machines for the production of baguette FRANCE DYONA


Framing machine-babieciarka, after restoration, technically.

Machines for the production of baguette Pietroberto FB 700


Pietroberto FB baguette moulder Construction year 2010 , in a Very good working condition - With 3 Teflon moulding rolers - Moulding capacity 70 cm length - S/S covers - 3 Ph motor power : 0,8 KW - On base with wheels Very good condition

Work Clock 600 MCM 14 pallets FMS Centers MCM Clock 600 14 pallet in FMS


Year 2001 2 Horizontal machining centers in the FMS FMS consists of 2 MCM CLOCK 600 MP14 pallet changer 14 positions Features of each machine: 500x500 pallet 600x600x700 races rapid 75 m / min Axis continuous B (4th axis) 360,000 pos. HSK63A chuck 15000 rpm Spindle motor 22 Kw torque 214 Nm electro OMLAT CNC Fanuc 16IM 200 tools each machine High adjustable pressure Renishaw tool setting Optical lines pressurized Supervisor jFMX (Windows) manual loading station for robot load point (robot not supplied)

Filling Line KHS 50 000 bph and returnable KHS GmbH Glass bottles 0.33 and 0.5 ltr


Filling Line KHS 50 000 bph new and returnable bottles glass bottles This line is made by KHS in year 2005 and it was in operation till July 2013. It still installed, fully operational and is suitable for filling 0.3 – 0.5 liter glass bottles with beer and soft drinks, capacity upto 50 000 bph in 0.5 liter bottles. This line has also a bottle washer but not crate handling Main Characteristics • Capacity 50 000 bph at 0.5 liter bottles • Made by KHS in year 2005, in operation till 2013, still installed • For both new and returnable glass bottles, operated for 0.5 liter bottles only • Secondary packaging Kisters shrink tray packer and KHS palletizer • Operation controls made with Siemens Simatic S7 PLC system • Complete line in fair condition and immediately available for relocation List of main equipment 1. Bottle Depalletizer KHS Innopal 2. Bottle Washing Machine KHS Innoclean – compact design a. Capacity 55000 bph b. Double ended c. Two washing sections and a rinsing section 3. Empty Bottle Inspector OMNIVISION II by Filtec year 2008 4. Filling Block KHS Innofil DMG VVF/SVF, year 2005 a. Rinser with 112 heads b. Filler with 120 filling heads c. 18 capping stations for crown cork d. Hot water injection for beer foam creating before closing e. Automatic outside washing system f. Comes with 2 sets of spare parts for each (two) bottle format g. Crown cork feeding system by MSN Magnettechnik (with magnet conveyor) 5. Level Inspection System KHS Metec Promecon 4000 with two measuring bridges (x-ray) 6. Flash Pasteurizer KHS Innopro KZE a. with 11 m3 buffer tank, diameter 2.0 m, insulated 7. Air Dryer ACI one section approx. 2 meters 8. Labeling Machine KHS Innoket KL 2080, year 2005 a. Type KL 2080-40/120-48 PM P1 b. With two labeling stations for 3 labels – front, back, neck c. How glue system d. Inbult Date printer Lasetec (laser) e. Data printer Videojet inkjet printer Excel 170 i 9. Label Inspector KHS Metec Promecon 3000 with measuring bridge (x-ray) 10. Kisters TSP 050 B Secondary Packaging Machine, year 2005 a. For tray, film and colored film b. Packaging configurations 5 x 4 (6 x 4) 11. Transport system with two lines after secondary packaging for correct palletizer feeding with package turning unit 12. Palletizer KHS Innopal PN 1 N (H) 2 13. Pallet stretch wrapping machine Robopak 14. Pallet conveyor to warehouse

Brew House Equipment, 230 hl/Brew Huppmann / ZVT two brew lines


Brew house equipment Huppmann/ZVU, two lines 230 hl/brew This is a complete brew line for beer made by Czech ZVU in 1990 and heavily modernized by Huppmann 2000. The brewery has two parallel brew lines and they have modern Huppmann Siemens S-7 series PLC based control system. Brewery was closed in the end of 2017 and is still installed. Main equipment •2 pcs Mash tuns volume 200 hl made by ZVT in year 1990 and modernized by Huppmann •2 pcs Pre run tanks volume 245 hl made by ASTRA in year 1990 •2 pcs Lauter tuns volume 230 hl. made by ZVT in year 1990 and modernized by Huppmann •2 pcs Wort kettle volume 230 hl made by ZVT in year 1990 •2 pcs Hob dosing units made by ZVT •2 pcs Whirpools volume 230 hl made by ZVT in year 2000 •Wort cooling system, Alfa Lavale in year 2000 •Ice water tank 21,6 hl made by Astra in 1990 •2 pcs Syrup tanks 26,0 hl made by Astra in year 1991. •Water buffer tanks (for ice, hot

Color Lid Printer POLYTYPE DDM 160/ 8


High-Performance Lid Printing System with automation for 1 man- operation. Automatic Infeed Conveyor to Feed Vertical Lid Stacks in-feed robot from stack reservoir to Denester Universal Screw Denester ARCOTEC Gas pre-treatment with pre-adjusted, automatically controlled gas-air mixture. Main 8-Color Print Unit Anti-ghosting inking units with fast removable, leak free ink fountains. Automatic cleaning of system rollers. Printing plate cylinder with quick locking device and micro-setting of the register for a fast reproduction. Cooling system for Fountain Rolls and 2 x oscillating rollers. No lid–no ink and no lid– no print system SIEMENS S7 PLC Controls Siemens SIMATIC PANEL OCP with Color Display. UVITERNO DBT 5545/ 1 UV-Tunnel, with 3 step switch (2/ 4/ 5.5 kW) * Real Time Camera with Display & Controls to recognize & automatically blow off faulty Printed Lids Horizontal lid re-stacker equipped with servo motor, exact lid counting and multi-stack delivery Conveyor. Data storage memory. Technical Data: Round lids: Min./max. rim diameter: 80 –180 mm Polygonal/ Rectangular lids: Min. rim dimension : 50 x 50 Max. rim dimension : 180 x 180 mm Min./max. lid height: 5/ 25 mm Max. printing speed up to (lids/h) : 30,000/ hr

KODAK MAGNUS 400


Max size: 762 x 685 mm Min size: 300 x 228 mm, Chemical free, , Prinergy EVO RTPO, WITH MCU multicasette loader, stacker, complete with screen an pc, compressor, only 7000 plates.

Sandretto IDEA640/150T


We have 2xinjection moulding machines for sale,manufactured by Sandretto,Italy in 2002,150t,stopped,good condition.Serious buyer contact us.

Milling machine centers Mikron UME 600 TNC 360/4xx CNC


x-travel 600 mm y-travel 600 mm z-travel 500 mm Control TNC 426 Heidenhain Main spindle: turning speed range - main spindle 5 - 6300 min/-1 power capacity - main spindel 11 / 7,5 kW max. Torque 800 Nm tool taper SK 40 swiveling-rotary-table: table diameter 630 mm Bapw07ib0n center hole 30 H7 mm rotatable 360 ° swivellable -20 / +45 ° Tool-Presetter: number of toolpositions 2x 22 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm feeds: rapid traverse ( X / Y / Z ) 15 / 15 / 12 m/min feed speeds max. 15.000 mm/min feed power max. 13 kN total power requirement 24,5 kW weight of the machine ca. 6,4 t dimensions of the machine ca. 6,0 x 3,0 x 2,1 m

Veneering presses ITALPRESSE XL-8


Code: 0361 Brand: ITALPRESSE Model: XL-8 - CE Standard Hot press with diathermic oil , with soli steel platens and oil boiler - CE Standard - Year 2008 Technical data: Solid steel platens dimensions mm 3200 x 1600 Thrust tonn 160 Opening mm 400 N° 8 pistons Pistons diameter mm 85 Oil Boiler 120 degrees Digital press timer for automatic opening Digital temperature setting and reading . working pressure Daily /weekly timer Exclusion of left cylinders Boiler power more than 18 Kw with selector for partialisation of 50% power Platens covered with Mylar Overall dimensions : mm 4000 x 2100 x 2320 h

LATHE HORIZONTAL DAEWO0 PUMA 240 LC


CNC: FANUC Oi- TB YEAR: 2006 CORSE X 242 mm - 680 mm Z Ø Swing over bed mm 420 rotating diameter 400 mm on the wagon rotating over bed mm 570 turnable chuck Length 648 mm spindle speed 3500 aSA A2-8 hydraulic turntable 3 jaws std 254 mm 18.5 to 22 kW motor power STRUCTURE BANCALE INCLINED AT 45 ° CAST IRON ABOUT WEIGHT KG 5740 TOWER TWO-WAY AUTOMATIC 10 tool stations TAILSTOCK tailstock quill in attack cycle vices 4 diameter tube mm diam 75/80 boost pressure 40 bar 660 kg PRESETTING TOOLS DESCENT / ASCENT AUTO (WITH BUTTON AND CODE M) AUTOMATIC LUBRICATION SYSTEM COOLING SYSTEM HIGH PRESSURE 6 BAR COLLECTION TANK COOLANT 240 LITER TRANSPORTER shavings BELT WITH EXIT ON THE RIGHT CABINET ON UNIT WITH COOLER HALOGEN LIGHTING ZONE WORK LAMP YELLOW ALERT AND END OF CYCLE "CE" in the rules.

Jelly sprayer Boyens Jelly Sprayer 300


Condition: New Technical data: • overall dimensions 660x470x950 mm; • electric power 230V / 50Hz / 16 Amp; • gel suction tube; • digital temperature and pressure setting; • two heated spray hoses; • castors; • purpose for liquid spray gel; • weight 110 kg.

Cutting-To-Length Lines FIMI


band width 100 – 1.300 mm band thickness 0,30 – 3,00 mm tensile strength (until 2,2 mm thickness) max. 1.000 N/mm² yield strength (until 2,2 mm thickness) max. 820 N/mm² tensile strength (until 3,0 mm thickness) max. 800 N/mm² yield strength (until 3,0 mm thickness) max. 650 N/mm² elongation max. 20 % coil weight max. 30,0 t coil inside – Ø 508 / 610 mm coil outside – Ø 600 – 2.100 mm sheet length 250 – 3.000 mm package weight max. 5.000 kg package height incl. palette max. 560 mm inlet speed 15 m/min. working speed max. 90 m/min. pass line height app. 1.100 mm working direction left ? right the line consists of: stocking ramps for 2 coils min. coil outside diameter 900 mm entry coil car centering device decoiler motorized mandrel – Ø 508 / 610 mm press roll motorized outboard bearing Support coil opener telescopic press roll strip centering device crop shear – hydraulically scrap box transfer table leveler 6 HI 2 cassettes with leveling rolls cassette 1: no. – leveling rolls 19 leveling roll diameter 43 mm cassette 2: no. – leveling rolls 19 leveling roll diameter 52 mm no. – back up rolls 5 sets, upper and lower cassette quick change device felt cleaning device tachometer wheel pinch roll at shear entry rolls driven by DC motor rotary shear VECTRONIC pinch roll driven by AC motor strip belt conveyor at the VECTRONIC shear exit place for oiling machine (customer’s supply) sheets conveyors to scrap carriage and stackers deflecting conveyor with 3 positions scrap box movable by AC geared motor scrap carriage for scrap length of max. 1.100 mm connecting conveyor to stacker 1 connecting conveyor to stacker 2 automatic stacker units: stacker 1 non-stop operation for sheets up to 3.000 mm length stacking with wooden pallets stacker 2 non-stop operation for sheets up to 3.000 mm length stacking with wooden pallets lifting stacking platforms 2 pieces for sheets up to 3.000 mm length hydraulic hydraulic oil pressure 120 bar pneumatic normal compressed air pressure 6 bar electric three phase voltage 380 ± 10% V, 50± 2 Hz auxiliary voltage 220 ± 10% V, 50± 2 Hz solenoid valve voltage 24 V DC. total power consumption 480 KVA

Cooking kettles and dwarf boilers Spako KWRK150


Product number: 1258 Type: KWRK150 Capacity: 150 liter Heating: electric Dimensions: 1420 x 1000 x 1180 mm With agitator

Beer KEG Filling Line KHS - GEA complete 30 and 50 liter 3 x 60 KEG/h


Beer KEG Filling Line KHS – GEA Till 3 x 60 KEG/h This is a complete working line for filling 30 and 50 liter aluminum KEG with beer at max capacity of 180 kph. The line was built buy KHS GEA Till in year 1999 / 2000 and it has state of art Mettler Toledo finnish product weighing system installed in 2015. Control system is built with Siemens Simatic S7 PLC List of main equipment • KEG conveyor system (painted black metel) • External KEG washer KHS GEA Till, type AK-1, machine number 5020-130-283 • KEG filler line I. KHS GEA Till, type TRANSOMAT 3/1, machine nr.5004-130-283 • KEG filler line II. KHS GEA Till, type TRANSOMAT 3/1,machine nr. 5004-230-283 • KEG filler line III. KHS Till, type TRANSOMAT 3/1, machine nr. 5004-130-342 (2000) • Stem generator Novin SVS4 • Flash pasteurizer KHS (GEA Ecoflex GmbH.) VT 20, capacity 60 hl/h • KEG Turner KHS GEA Till M97 / II • Full KEG transport conveyor • Marker unit Videojet techncologies EXCEL 200 • Marker unit Videojet Technologies EXCEL 170i AF • Finished product scale Mettler Toledo XE 100, year 2015

Vertical Fermenting Tanks CCT 1300 hl Holvrieka, Denmark Insulated, 1.0 bar


Vertical Fermenting Tanks CCT Holvrieka 1300 hl Gross Tanks are made by Holvrieka in year 1998. They are self standing insulated and glycol cooled with 4 cooling zones. We have four identical tanks, both equipped with CIP bowl and in good condition. Techncial data: • Volume brutto 1300 hl, netto 1100 hl • Made by Holvrieka, Denmark, 1998 • Pressure 1.0 bar • Insulated, insulation PUR foam 150 mm • Glycol cooling 3 cooling zones on the body and cooled cone • Diameter 3550 mm, Total height 18100 mm, Weight 8 200 kg • Equipped with valves, sensors, sample valve, pipes, panels and service platforms • Two lifting hooks on top of CCTs for installation/dismantling

HYDRAULIC BRIQUETTING PRESS OF SHAVINGS FRANZ ARNOLDS SÖHNE HSB 18 - DIA. 180 x 220 MM


Qty. 1 Second-hand hydraulic briquetting press of shavings Mfc.: FRANZ ARNOLDS SÖHNE Type: HSB 18 Built: 1989 Force: 8900 kN - briquettes diameter: 180 mm - height: 100-220 mm - weight Steel: 15-25 kg Gray iron: 16-22 kg Brass: 18-24 kg Alumin ...

SOFT SETTING BIANCALANI 1000


BIANCALANI SOFT SETTING MACHINE FOR DRY MODEL 1000 TWO ROPES STEAM HEATED

TORNIO CNC A


MARCAGALDABINI MODELLOCTM 20 Typetypesetting machine traction test STROKE VERTICALE800 mm. POTENZA4 .5 Kw YEAR COSTRUZIONE1995 MATRICOLA34032 NOTES 20 Ton capacity.

Tool Presetter ZOLLER V2000


Measuring area x-/ y-travel: 700/ 500mm, electronics: ZOLLER DA6052, compressed air supply: 0.6MPa, length: 1760mm, width: 1120mm, height: 2180mm, weight: 500kg, operational hours: ca. 100000h.

JET MCS MULTIFLOW


MCS HT JET MODEL MULTIFLOW 3J HT. YEAR 2003 APPROX. CAPACITY 450 KG TERMOELETTRONICA CT301/LAN PROGRAMMER WITH HOT WATER STORAGE TANK

Kettle Kerres FKK 550


Condition: Overhauled Technical data: • overall dimensions 1750x1140x900 mm; • internal dimensions 1500x800x450 mm; • capacity 550 litres; • power 28 kW; • power supply 400 V; • oil jacketed.

Steinecker Brewhouse 2.3 Mio hl/annum Steinecker, 1999 700 hl/brewm, 11.5 brew/day


Steinecker Brewhouse 2.3 Mio hl/annum, year 1999 This is complete brewhouse equipment from mash tank to worth cooler made by Steinecker in year 1999. It has 2 mash tanks, Lauter tun Pegasus model. Wort kettle has internal boiler. It has Steinecker B ...

Can Filling Line 30.000 cph for CSD Ortmann&Herbst, Kettn 0.25, 0.33, 0.5 ltr cans


Can Filling Line 30.000 cph for CSD This complete can filling line was installed in 1994 and it was filling various carbonated soft drinks in 0.25, 0.33 and 0.5 ltr aluminium cans with type 202 and 211 lids. The line was in operation till 2015 and  ...

Automatic All Around Packer Krones Variopac Krones / Kettner Variopac PFS 45, 45 tact/min


Automatic All Around Packer Krones Variopac PFS 45 This Krones Variopac PFS 45 is currently in use, is perfectly maintained and has less than 6500 running hours. It is currently being used for stretch film multipacks only. It comes complete with the  ...

Crate Packer Kettner Blitzpac JUNIOR Kettner GmbH Blitzpack JUNIOR E 3 T


Crate Packer Kettner Blitzpac JUNIOR A crate packer made by Kettner in 1999. This machine loads and unloads bottle crates. Used to work with 0.5 liter bottles and 24 bottle crates. The equipment is currently dismantled and in a warehouse. Manufactur ...

Depalletizing Station Kettner with pallet handling Krones Kettner Pressant Universal,Palmagazine


Depalletizing Station Kettner with two depalletizer and pallet handling system This depalletizing station was built in two phases by Krones Kettner, glass bottle depalletizer in 1998 and can depalletizer in 2002 with fully automated pallet handling s ...

Tray Shrink Packer Kettner Variopac TSF 45 Kettner GmbH Variopac TFS-45


Tray Shrink Packer, Kettner Variopac TSF 45 This tray shrink packer was delivered by Kettner in 2002. It has been used for 0.5, 0.75 and 1.0 liter glass bottles on a carton tray and wrap it in to shrink wrapped plastic film with the capacity of 30-45 ...

Palletizer Kettner Pressant with Pallet Wrapper Kettner and Robopack Pressant Universal, Helix HS30


Palletizer Kettner Pressant with pallet wrapper and conveyors Complete palletizing line made by Krones in 2002 with Kettner palletizer and Robopac stretch wrapper infeed and transfer table as well as case turner. This line has been palletizing 0.33 a ...

Spiral freezer Reco 400mm


spiral belt stainless steel with 8 tiers nett belt width ± 400 mm belt Intralox belt length : ± 80 m dimensions (l x w x h) : ± 5.400 x 4.450 x 2.700 mm motor compressor and evaporator included does not include any insulations panels

spiral freezer Reco 200mm


spiral belt stainless steel with 14 tiers nett belt width ± 200 mm belt Intralox motor compressor and evaporator included does not include any insulations panels

vacuum filler Risco Brevetti RS303


280L. hopper suitable for filling, portioning, twisting and grinding max. portion : 0-32 kg max. filling pressure : 60 bar max. 4 tonnes/h 10,7 kW PLC control dimensions (l x w x h) : ± 2.180 x 1.300 x 2.100 mm with loader for eurobins with gr ...

Crate Packer Kettner Blitzpac 50.000 bph Kettner GmbH Blitzpac E45 T1


Crate Packer Kettner Blitzpac Robot E 45 T1 50 000 bph This machine is made by Kettner (now part of Krones Group) in the year 1996. The line has packed glass bottles into 24-bottle standard crates with the capacity of 50.000 bph. This machine has singl ...

Tray Shrink Wrapper 60 cycles/min Kettner GmbH Variopac TFS-60


Tray Shrink Wrapper Variopac TFS-60, year 2002 This shrink wrapping machine was delivered by Kettner in 2002. It has been used for 0.5 liter glass bottles on a carton tray and wrap it in to shrink wrapped plastic film with the capacity of 60 cycles per ...

Labeling Machine 60.000 bph KHS GmbH INNOKET KL 2080/120 - 48 LM GT


This high capacity Innoket KL 2080 labeling machine was manufactured in year 2005 by KHS GmbH, Germany and it is dismantled in year 2013. This labelette has two stations for cold glue labeling system and it suits both for paper and foil applications. This ...

Beer Mash Filter NORTEK HD 800 hl/h Nordon Nortek 800 hl/h


Beer Mash Filter Press NORTEK HD 800 hl /h This mash filter was manufactured by Belgium NORDON in year 1998 and it is still installed in St.Petersburg, Russia. It was filtrating mash from two mash kettles, each 410 hl/brew, 12 brews per day. The equip ...

HEIDELBERG SM 52 2+


HEIDELBERG SPEEDMASTER 52 2+ STRAIGHT MACHINE PLUS VERSION AUTOPLATE PRESET ALL AUTOMATIC WASHER ALCOLOR DAMPENING MGE COOLING UNIT POWDER SPRAYER MACHINE OVERHAULED ONLY LAST YEAR WITH ALL NEW ROLLERS THAT ARE NOW PRETTY NEVER USED VISIBLE RUNNI ...

Pallet labellers Bopack Systems 601XP Applicator


Used machine / Gebrauchtmaschine Machine information : Class Palette Labeler Manufacturer Bopack Systems Model 601XP Applicator Qty 2 machines Serial number 21343A & 21343B Year of manufacturing 2004 Speed 106 400 cont/h Type of cont S ...

COMETTO SS2LASP


* ENG * For sale Naczepa COMETTO SS2LASP. Description in English below. * PL * Do sprzeda?y Naczepa COMETTO SS2LASP . Zapraszamy tak?e klientów z zagranicy. . ****** ****** ****** ****** ****** This machine is ready to work straight after ...

COMETTO SS2LAP


* ENG * For sale COMETTO SS2LAP. Description in English below. * PL * Do sprzeda?y COMETTO SS2LAP. Zapraszamy tak?e klientów z zagranicy. ****** ****** ****** ****** ****** This machine is ready to work straight after purchase. The mach ...
Get the latest machine offers by email: order newsletter