11593 offers

maximum number of results exceeded > 1000
please refine your search

Category: 101: boring mills and machining centers
New in: 2003
Price: request quote
Location: Land-at AT 5580 Tamsweg ( Salzburg ) / Austria // Europe, Nr. 31
Seller: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools

AXA vertical - horizontal 2-1760-M-5 BJ. 2003 / 5 axes / xyz BAZ mod VHC: 1760-600 - 800 / table 1500 x 600 / rotary table integrated 44 seats (2 x 22) / cnc HEIDENHAIN 600 / magazine Ã? mod TNC 530 / speed 100-15,000 U Min / 40 m-min. 3 D probes and new spindle Messline Al in X axis (22,000 euros) / Swivel Head is a simultaneous head continuously variable / good condition fe.gi.maschinen.sbg.at AXA vertical - horizontal machining center mod VHC 2-1760-M-5 / year 2003 / 5 axes / xyz: 1760-600 - 800 / table 1500 x 600 / integrated turn-table Ã? 600 / magazine 44 tools (2 x 22) / cnc HEIDENHAIN mod. TNC 530 / speed 100-15,000 rpm. / 40 m-min. / 3 D test / new spindle and measu ...

Category: 109: other metal working machines
New in: 2010
Price: 27.000 EU€
Location: Land-pl PL
Seller: Kennedy Machines

The machine is a special four-roller winder, intended for folding sheets AL m. Al. reflector. It has 3 independent lower rollers shortening the time to a minimum roll. The rollers are supported by adjustable, bearings slides for easy compensation of the deflection depending on the thickness and hardness of the material. Compensation of sagging upper roller is realized by longitudinal beam. All rollers are driven. The spinning process is carried out without slip to prevent scratching of the workpiece. CNC - equipped with an interpolation, it is a simultaneous rotation bending rolls, along with their shift. All rolls are chrome-plated and polished. All axes are programmable. The machine has th ...

Category: 103: milling machines
New in: 2014
Price: request quote
Location: Land-de DE 86971 Peiting, Zechenstr. 10
Seller: CNC Bote Johann Demmel

Year 2014 Control HEIDENHAIN TNC 128 Traverse paths x 400 mm Y 250 mm Z 400 mm Table dimensions: 600 x 320 mm Number, width and distance of the T-slots 5, 14, 63 mm Axes feed rate of 0-2 m / min Axes rapid feed rate of 0-5 m / min Spindle maximum speed 20-4,000 rpm Chuck SK40 Vertical Milling spindle maximum speed 30-5,500 rpm Chuck SK40 Quill stroke 90 mm Mass 1,775 x 1,380 x 1,900 mm Weight approx. 1.200 kg

Category: 101: boring mills and machining centers
New in: used
Price: used machinery auction RESALE 77 €
Location: Land-it IT Italy, 25011 Zona Industriale di Calcinato
Seller: Surplex GmbH

Weight approx.: 3 kg Dimensions (l x w x h) approx.: 200 x 200 x 200 mm Description: Composed of 3 packs with metal drilling bits 1-10 mm, see photos

Category: 109: other metal working machines
New in: 2004
Price: 6.500 €
Location: Land-de DE Marl
Seller: BVA Auctions

Auction name: Partner auction BVA Auctions & Dechow | Workshop equipment of the RAG (54084) Online auction Start of auction: 17 December 2018 10:00 GMT +0200 (Western Europe (DST) Closing time: 15 January 2019 11:08 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information contact: support@dechow

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

variabel speed, timer, \r\nbowl lifting and lowering by a lever \r\naccessories: 1 bowl 40 l stainless steel \r\n 1 whip stainless steel, \r\n 1 doughhook stainless steel, \r\n 1 flatbeater stainless steel

Category: 1004: concrete machinery
New in: 1990
Price: request quote
Location: Land-de DE 65510 Idstein, Brunnenstr. 22
Seller: Lonz - Mess und Regeltechnik

Used concrete block making machine Fabr. Henke / Masa with core and attachment Board size 1400 x 1050 mm stroke head countersunk head vehicle group packaging strapping Chambers in a diverse Formen.Mischanlage is complex, ZementsilosDie now can a ready state, but also to the present Site be continued. For more information, 0171 6232061 or via MailLonz - measuring and RegeltechnikBrunnenstrasse 22 65510 Idstein

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

5 decks, 600 x 1600 mm, oven incl. steaming unit\r\ndimensions: l 2800 mm, w 1240 mm, h 2310 mm\r\n

Category: 403: labeling machines
New in: 2002
Price: request quote
Location: Land-de DE 79291 Merdingen, Großsteinen 1
Seller: Jürgen Escher Etikettiertechnik

Manufacturer: KRONES Type: SOL OMATIC K018 H87 Model: 1240-8-6-130 YOB: 2002 Performance: 50000 Running direction: clockwise feeding: parallel Aggregates: Aggregates 1 PWL410, aggregates 2 PWL 370 Bottle table: partition 30 Label magazine AMB Voltage: 230/400 V Electricity: 3PH/PEN Nominal frequency: 50 Hz Control voltage: 24 V Label: Body, back, NA

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

4 decks, 600 x 1600 mm, oven incl. steaming unit\r\ndimensions: l 2800 mm, w 1240 mm, h 2200 mm\r\n\r\n

Category: 101: boring mills and machining centers
New in: used
Price: 6.500 
Location: Land-fr FR 93100 montreuil, 27 rue leon loiseau 27
Seller: negomat industrie

Hello We want to take a turn to digital assistance CHURCHILL Model: Churchill 660 - Entrepointe 2 300 mm Equipped with the ANILAM 4200 T command with: Automatic change DUPLOMATIC BSV - N 200 disc 8 turret model positions DN o340mm VDI 40 Chuck 4 JAWS concentric LADNER o315mm bezel fixed PROTURN Ø35 / 170 fixed bezel Ø100 mm / 250mm bezel to follow Ø40 to 110mm diameter over bed 660 mm race = 2 260 mm Z axis the axis X = 300 mm spindle speed race = 10 to 2,000 rpm in 2 ranges of speed against advanced race of the sheath 180 mm with sheath o75mm, 5 CM

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

with conveyor belt\r\ndimensions: 180 x 95 x 150 cm \r\n

Category: 105: saws
New in: 2003
Price: 3.000 €
Location: Land-de DE 64367 Mühltal (Nieder-Ramstadt), An der Schillertanne 7
Seller: Hagen Busch Maschinenhandel

Data: Manufacturer: Berg & Schmid Type: GB 305 Autocut Electrical data: power External dimensions approx. B: 1750mm Hmax: 1900mm L1480mm Speed: stepless speed control Weight: 600 kg Reduction: Automatically via hydraulic cylinders Possible payoff the graduation Gehrugsschnitt

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

model 1997, 5 decks 180 x 160 cm, gasburner

Category: 101: boring mills and machining centers
New in: 1998
Price: request quote
Location: Land-at AT 5580 Tamsweg ( Salzburg ) / Austria // Europe, Nr. 31
Seller: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools

AXA vertical - horizontal BAZ mod. VHC 3-3000 M / 98 / xyz: 3000 (1550 left - 950 right) - 800 (until 870) - 800 (up to 1000) SK 40 cnc HEIDENHAIN TNC 430 / magazine 36 tools / round table Ã? 1000 / hydraulic unit / Swivel Head + 90° Division 2.5 deg / speed 100-10,000 U -min. / good condition Fe.gi.Maschinen.SBG.at AXA vertical - horizontal machining center model VHC 3-3000 M / year 98 / xyz: 3000 (1550 left - right 950) - 800 (up to 870) - 800 (up to 1000) / SK 40 cnc HEIDENHAIN TNC 430 / magazine 36 tools / rotary table Ã? 1000 / hydraulic unit / swivel head-+ 90 ° pitch 2.5 degrees / speeds 100-10,000 rpm / good condition Fe.gi.Maschinen.SBG.at

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

variable speed, bowl lifting\r\nand lowering by a lever \r\naccessories: 1 bowl 60 l stainless steel \r\n 1 whip\r\n 1 bowl 30 l stainless steel \r\n 1 whip\r\naccessories: 1 bowl 60 l stainless steel \r\n 1 whip, 1 doughhook, 1 flatbeater \r\n \r\n 1 bowl 30 l stainless steel \r\n 1 whip, 1 doughhook, 1 flatbeater \r\n

Category: 104: grinding machines
New in: 1970
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

For through-feed and plunge grinding, working diameter: 3-4mm, connected load: 2.8kW, length: 1200mm, width: 800mm, height: 1500mm, weight: 500kg, grinding wheel and control wheel are new, main bearing was changed in 2016.

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

planetary-mixer, fabr. REGO, type PM140 E, 140 l, \r\nvariabel speed, microprocessor controlled\r\nbowl lifting and lowering electric\r\naccessories: 1 bowl stainless steel, 140 l --new--\r\n 1 whip stainless steel --new--\r\n 1 flat beater\r\n 1 doughhook

Category: 106: presses
New in: used
Price: 85 €
Location: Land-de DE 57080 Siegen, Eiserntalstr. 235
Seller: MPS Frank Müller

A hole pipe cutting diameter 60 mm for E.g. leather PVC seals rubber cardboard paper textile wood plastic ALU / soft metal ect. The hole pipe is in used condition and has been used to punch of foam; see pictures. Contact person Mr. Mueller see also our over 200 more deals at. (Changes and errors in the technical data, information and prices and subject to prior sale!)

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

type HK 60, lifting cap. 100 kg, \r\ntip-height 150 cm, manuell service

Category: 109: other metal working machines
New in: 1995
Price: request quote
Location: Land-de DE 58642 Iserlohn, Bergstr. 14
Seller: IMDAT-WERKZEUGMASCHINENHANDEL

Rundtrovamaschine 1250mm Fabr. RÃ?SLER Type: R250-A/SA-PU-KFA BJ. 1995 with acoustic protection device Trommeldruchmesser 1250mm Available with complete electrical plans.

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

variabel speed, timer, \r\nbowl lifting and lowering by a lever \r\naccessories: 1 bowl 40 l stainless steel \r\n 1 whip stainless steel, \r\n 1 doughhook stainless steel, \r\n 1 flatbeater stainless steel

Category: 209: other wood working machines
New in: new
Price: request quote
Location: Land-at AT 4924 Waldzell
Seller: Wilhelm Freudlinger Werkzeuge und Maschinen

3 heavy duty roller block Roll width: 500-800 mm Roll diameter: 80 mm Base plate: 500 x 500 mm Approximate weight: 72 kg Space: 800 x 750 mm Roller spacing: 350 mm - roller Center Lifting capacity & Max load: 250 kg Height adjustment by: 640-930 mm Stepless height adjustment via rack and pinion Side height fixing with clamp lever Adjustable feet 2 metals - handles All parts galvanized

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

type INFRA EE 520/180, model 09/1998\r\n5 decks, 1800 x 2000 mm\r\ncondition as it is, dismantled and loaded \r\n

Category: 101: boring mills and machining centers
New in: 1999
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

X-travel: 1220mm, y-travel: 1085mm, z-travel: 1225mm, B-travel: 360°, pallet dimensions: 1000x1000mm, max. table load: 2t, max. spindle diameter: 130mm, rotational speed: 4-6000/min, controls: SIEMENS SINUMERIK 840 D, weight: 25t.

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

tools: 1 whip, 1 four wing beater, 1 two wing beater (like a guitar)\r\nbowls stainless steel include trolley

Category: 1014: formworks
New in: new
Price: 29 €
Location: Land-at AT 5202 Neumarkt am Wallersee
Seller: Berger International

EuroProp 20-350 eco, galv., new low dead weight allows for speedy work and conserves energy prop retains its value for many years thanks to high-quality production and galvanisation reliability in many applications due to high load capacity up to 36.7 kN optimised thread pitch allows for quick and safe release of fixed prop safe working conditions thanks to handtrapprevention and anti-drop-out latch Certificated EN 1965, produced in Europe.

Category: 702: breadmaking and confectionery machines
Category: 107: sheet metal working
New in: used
Price: 2.350 €
Location: Land-de DE 33335 Gütersloh, Anemonenweg 8
Seller: Venker Werkzeugmaschinen GmbH

Maximum bending length: 1020 mm Maximum sheet thickness: 1.25 mm steel Right and left-hand rotation via foot switch Roll diameter: 56 mm

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

3 decks (with steam) 580 x 780 mm,\r\n1,44 qm, electric, assembled on a steel plate\r\nelectrical power: 380 V, 50 cycles

Category: 1014: formworks
New in: new
Price: 27 €
Location: Land-at AT 5202 Neumarkt am Wallersee
Seller: Berger International

EuroProp 20-300, galv., new low dead weight allows for speedy work and conserves energy prop retains its value for many years thanks to high-quality production and galvanisation reliability in many applications due to high load capacity up to 36.7 kN optimised thread pitch allows for quick and safe release of fixed prop safe working conditions thanks to handtrapprevention and anti-drop-out latch Certificated EN 1965, produced in Europe.

Category: 107: sheet metal working
New in: 2010
Price: request quote
Location: Dreieich
Seller: KIRCHGEORG Werkzeugmaschinen GmbH

pressure: 160 t chamfer lenght: 3050 mm distance between columns: 2550 mm control: CYBELEC DNC 880 S back stop - adjustable: 620 mm throat: 350 mm max. stroke: 200 mm ajustment speed: 100 mm/sec working feed: 9 mm/sec return speed: 86 mm/sec table width: 104 mm power requirement: 15 kW voltage: 400 V total power requirement: 15 kW weight of the machine ca.: 9,8 t dimensions of the machine ca.: 4,00 x 2,20 x 2,60 m - Fab.-no.: 7531105124-E - Control: CYBELEC DNC 880 S - CNC-controlled back stop - foot switch

Category: 107: sheet metal working
New in: used
Price: 8.100 €
Location: Land-de DE 33335 Gütersloh, Anemonenweg 8
Seller: Venker Werkzeugmaschinen GmbH

Maximum bending length: 2540 mm Maximum sheet thickness: 1.5 mm steel Either manual or Automatic bending mode possible

Category: 108: welding machines
New in: used
Price: request quote
Location: Velen-Ramsdorf (46342)
Seller: WMT GmbH & Co. KG

table diameter: 495 mm table load: 300/150 Kg swivelling range: 0 - 90 manuell Grad turning speeds: 0,35- 5,0 U/min spindle bore: 65 mm Torque: 225 Nm welding current: 500 Ampere connected load frequency: 230 Volt weight of the machine ca.: 0,09 t dimensions: 0,65 x 0,55 x 0,55 m Welding turntable with - Footswitch - tilt over winch - Speed continuously adjustable - 500 amps welding current transmission

Category: 103: milling machines
New in: 2000
Price: 6.300 €
Location: Land-de DE 33335 Gütersloh, Anemonenweg 8
Seller: Venker Werkzeugmaschinen GmbH

To edit maximum format: 260 x 150 mm Vertical milling head: Longitudinal stroke 2150 mm Cross stroke: 230 mm Vertical stroke: 210 mm Scale re rights milling cutters: Longitudinal stroke: 265 mm Cross stroke: 280 mm Vertical stroke: 105 mm Spindle speed: 12,000 U / min

Category: 108: welding machines
New in: used
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

table diameter: 350 mm table load: 100 / 50 Kg swivelling range: 0 - 90 manuell Grad turning speeds: 0,6- 6,0 U/min spindle bore: 30 mm Torque: 75 Nm welding current: 500 Ampere connected load frequency: 230 Volt Welding turntable with - Footswitch - tilt over winch - Speed continuously adjustable - 500 amps welding current transmission

Category: 108: welding machines
New in: 2015
Price: 150 €
Location: Land-de DE 41066 Mönchengladbach, Krahnendonk 116
Seller: Oeben Werkzeugmaschinen

Description: Handle KEK / 17 incl. 2 piece inserts (of which one new) Pressure reducing valve oxygen and acetylene Oxyacetylene twin hose 5 m very well maintained New price about 300,-euro + VAT

Category: 210: window production machines
New in: used
Price: request quote
Location: Oberkochen
Seller: Gebr. Engelfried oHG

Tenoning spindle: 1 St. Number of milling agregates: 7 St. Spindle diameter: 50 mm Control: PC-Steuerung/ Nexus Window system Weinig Unicontrol 12 with CNC spindles, radial / axial CNC, Vario table with horizontal NC axis Studio window production possible - Crosscut saw axial NC axis - Rounding unit axial NC axis - Slit spindle with 640 mm length axial NC-axis Werkzeugflugkreis max.320 - Length stop 3500 mm with NC axis - 3 profile spindles, each 400 mm in length NC axis axial-radial - Profilfräsaggregat right NC axis axial- radial - 2 x profile milling units top NC axis axial-radial u.8fach turret - Profilfräsaggregat down NC axis axial-radial - PC NEXUS control - Online data transmissi ...

Category: 101: boring mills and machining centers
New in: used
Price: 777 €
Location: Land-de DE 41066 Mönchengladbach, Krahnendonk 116
Seller: Oeben Werkzeugmaschinen

well-preserved drilling of company Flott, type SB 15 incl. Chuck by METABO 3-16 mm Technical data Spindle support 1 MK Drilling 15 mm 6 RPM 200 â 3000 rpm. Throat depth 300 mm Table size 315 x 285 mm Table size 215 x 215 mm Distance table Quill - 500 mm Quill stroke 100 mm Dimensions (Lxwxh) 800 x 400 x 1700 mm Weight 250 kg Power 0.75 KW

Category: 203: planing machines
New in: 2012
Price: used machinery auction RESALE 65.000 €
Location: Land-de DE Germany, 73432 Aalen
Seller: Surplex GmbH

serial number: 117072 Weight approx.: 5800 kg planing width: 260 mm Dimensions (l x w x h) approx.: 5700 x 2100 x 1740 mm number of spindles: 8 planing height: 160 mm feed: 5-30 m/min surface table length: 2000 mm Description: WEING Powermat 1000 <,/ h3>, moulder ------------------------------- Machine is being cleaned and checked by a retailer at the moment Specifications: <,/ b>, Number of spindles: 8 pcs Working width: 260 mm Planer height: 160 mm Calibration table length: 2000 mm Feed motor: 7 kW - feed speed: 5-30 m / min. Control: Weinig PowerCom -Nutenbett -Axis radial and axial CNC-controlled -Working width max. 260 mm Working height max. 160 mm -Abrichttisch 2 m long (incl ...

Category: 804: presses: sheetfed 4-color
New in: 2003
Price: request quote
Location: Land-tr TR 34010 ISTANBUL, MALTEPE MH. DAVUTPASA CD KALE IS MERKEZI NO141/216 TOPKAPI
Seller: Patrol Makina

Man Roland 704 3B P Year: 2003 Impression: 197 Million 2+2 / 4-0 Perfector CCI Remote Control Rolandmatic Dampening Grapho Metronic FDM 17 Densitometer Semi Auto Plate Change All Washers (Roller-Blanket-Cylinder) Technotrans Beta D Recirculation Ink Temperature Control Becker Variair System Auto Size Adjustment in Feeder-Delivery Powder Removal System Grafix Cantronic 3000 Powder Spray Steel Plate in Feeder – Delivery Still in production Excellent Condition Available immediately Located in Turkey

Category: 201: saws
New in: 2013
Price: request quote
Location: Land-it IT Italy, 35010 Villa Del Conte (PD)
Seller: Surplex GmbH

serial number: 86999 Weight approx.: 30000 kg cutting length: 4500 mm control: BIESSE Dimensions (l x w x h) approx.: 18000 x 17000 x 5000 mm cutting height: 123 mm main motor: 2 x 18,5 kW scoring saw: 2 x 2.2 kW cutting depth: 2200 mm software: OSI main saw blade: 430 mm scoring saw blade: 200 mm lift table: 4300 x 2200 saw carriage speed reverse: 140 m/min total power approx: 45 KW Description: SELCO WNA650 Panel Saw/Angular Plant - Multipusher 2.4, year 2013 with ESSE2 SCAR-N2/P unloading bridge Panel saw/angular plant: ? rear loader size 4500 x 2200 mm ? cutting blade protrusion 123 mm ? track-blade max. speed 140 m/min main blade engine 2 x 18,5 Kw ? Engraver engine 2 x 2.2 Kw ? Blad ...

Category: 102: lathes
New in: 1962
Price: 2.950 €
Location: Land-de DE 52249 Eschweiler, In der Krause 51
Seller: Kemper Trucks GmbH

Top width 1,500 mm Swing over bed 500 mm Include loading on the spot price.

Category: 1300: other machines and plants
New in: 2007
Price: used machinery auction RESALE 34.900 €
Location: Land-pl PL Poland, 63460 Nowe Skalmierzyce
Seller: Surplex GmbH

Weight approx.: 4500 kg Dimensions (l x w x h) approx.: 6000 x 2300 x 2500 mm Description: SPÜHL P-395 Pocket Spring Machine / Wire-Forming Machin - manufacturer: SPÜHL Switzerland - year of manufacture: 2007 - manufactured springs total: 47846036 pcs - manufactured springs tempered total: 1890471 pcs - operating hours: 17195 h - production hours: 9791 h technical details: - spring height: 150 - 260 mm - pocket hight: 120 - 200 mm - wire diameter: 1,6 - 2,1 mm - output quantity springs pcs/min: 30 to 90 pcs/min further equipment: - comes with hardening aggregate - comes with 2 ultra sonic welging aggregates for pocket production - comes with decoiler included - we have make a vi ...

Category: 102: lathes
New in: 2007
Price: request quote
Location: Land-cz CZ 25219 Rudna, Horelicke namesti 1263
Seller: CEE-Machines

The machine is in good technical condition, after a prior agreement, the possibility of testing.

Category: 206: presses
New in: 2007
Price: 159.000 €
Location: Land-de Germany, 32683 Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Multifoiler press\r\nBrand: Bürkle \r\nType: BTF 1528-1400 Flowline\r\nYear: 2007\r\n\r\nwith Paternoster\r\n\r\nHigh-performance system for the membrane-free thermoforming of smooth and shaped MDF parts with thermoplastic foils.\r\n\r\nTechnical data:\r\n\r\n1. Surface material:\r\nfrom the roll, or as a blank cut \r\na) PVC foil 0.30 - 1.0 mm\r\nb) High gloss foil 0,50 - 1,0 mm\r\nc) PET foil 0.35 - 0.6 mm\r\nAll foils suitable for the Bürkle Thermoform process.\r\n\r\n2. carrier material:\r\nMDF board, with smooth profiled surfaces.\r\nthickness tolerance +/- 0.15 mm\r\n\r\n3. Adhesives:\r\nDispersion adhesive 80 - 150 g / m²\r\nfor foils, 1-component or 2-component polyurethane adhesi ...

Category: 107: sheet metal working
New in: used
Price: request quote
Location: Land-nl NL Enschede
Seller: DutchMach

OSTAS PLATE SHEAR TYPE ORGM 2050 x 3 -Capaciteit 2050 x 3 mm -Achteraanslag electrical -Voetbediening -Fotocelbeveiliging van de achterzijde -Oplegarmen -Verlichting van snijlijn -Remmotor -Noodstop -Documentatie -Weight 2000 kg -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Category: 102: lathes
New in: 2014
Price: request quote
Location: Deutschland
Seller: Stiens Werkzeugmaschinenhandelsgesellschaft mbH

turning diameter: max. 500 mm turning length: 1.250 mm control: 840D sl ShopTurn Siemens swing diameter: 500 mm distance between spindles: 1.450 mm standard turning dia.: 390 mm Main spindle:: turning speed range - main spindle: 20 - 4.000 min/-1 power capacity - main spindel: 35 / 45 kW max. Torque: 600 / 770 Nm usable bar diameter: 78 / (102) mm C-Axis: 360 ° chucking diameter: max. 250 mm tool magazin:: number of toolpositions: 48 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 120 mm max. tool weight: 8,0 kg max. tool length: 300 mm Milling Spindle:: Speed Milling Spindle: max. 12.000 min/-1 power capacity - milling spindle: 22 kW max. Torque: 100 Nm tool taper: HSK-6 ...

Category: 104: grinding machines
New in: used
Price: 3.600 €
Location: Land-fr FR 73520 Saint Béron, Lieu dit Le Sourd
Seller: SARL Kraffter

Surfacer grinder TACCHELLA type 4AM: -Table working surface : 900 x 130 [mm], -Table longitudinal traverse (hydraulic movement) : 400 [mm], -Table traversing speeds (automatic) : 0.1 to 10 [m/min], -Table swivel : 360°, -Wheelhead vertical adjustment : 250 [mm], -Wheehead cross traverse : 200 [mm], -Wheelhead swivel : 360°, -Wheelhead tilting above and bellow the horizontal axis : +/- 20°, -Max wheel diameter when mounted : 200 [mm], -Power supply : 380 [v]. Dimensions : 1350 (width) x 1200 (depth) x 1600 (height) [mm] Weight : 1150 Kg approx. Equipements included : -Magnetic clamping plate – clamping surface : 350 x 150 [mm], -Complete coolant system, -A set of  ...

Category: 205: boring mills, machining centers
New in: 1989
Price: request quote
Location: Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

bore capacity in steel (diameter): 32,0 mm throat: 290 mm bore stroke: 160 mm turning speeds: 55 - 1.450 U/min throat: 290 mm table-size: 110 - 2.900 mm column diameter: 110 mm engine output: 1,5 kW spindle taper MT: 3 MK weight - pallet system: 400 kg range L-W-H: 1,0 x 0,61 x 1,88 mm

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)