used ESAB CNC Plasma Cutting Machines

CNC flame cutting machine make ESAB type Numorex NXB 6500Machine -No: 89022, built in 1989Track width: 6500 mmTrack length: 12000 mmCutting table height: 700 mmNumber of burners: 6 oxy-fuelType of control: CNC 510With- Extraction systemused, from large company, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

ESAB EAGLE 2000 plasma cutting machine was built in 2009 in Germany. The machine is designed for machining stainless steel, structural steel, low-alloy steel and aluminium with a maximum thickness of 30 mm and has a very stable and vibration-free welded construction. Excellent cutting precision with simultaneous low operating costs is ensured by the ESAB Precision Plasmarc 201 plasma source with a power of 200 A, which generates a narrow plasma beam with high energy density per small area of material. The plasma cutting machine portal was fixed by two dynamic servo drives operating with low backlash on the machined profile rails (X axis). The dynamic servo drive in the transverse carriage drives the spur gear, which then meshes with the toothed bar of the machine portal, causing transverse movement (Y axis). The plasma cutting machine is equipped with an ESAB CNC control with the late ...

CNC plasma cutting machine with exhaust air system from Dodek Cutting source: Hypertherm powermax 85 Cutting program: ESAB Vision T5 from 2021

Plasma Cutting/Oxyfuel ESAB Numorex for sale Technical data: - Plasma source: 240/360 A - Bevel plasma torch for chamfer cutting - Vibrating suction bench for evacuating pieces - Smoke extraction system.

Machine type: ESAB SXE-P-5000 NC/-CNC type: CNC version 52 Year of construction: 1995/Refurbishment and conversion 2009 track width: 5,000 mm track length: 34 000 mm cutting range: width 4 000 mm Laenge 18,000 mm runway height 700 mm table height 700 mm Head: 2 head 1: Cutting head head 2: marking unit water basin: 3 sinks sinkable to cut underwater. Power sources: 2 connected in parallel 400 A cutting is possible in the VA range up to 100 mm cutting cutter, soft fillers up to max. 50 mm. The plant is in operation. Complete data about the retrofit on request ; ready for immediate use

Burner types: PT - 600 and PT - 15 XLS plasma power source: ESP 200; 100-160 volts; 40-200 A cutting method underwater Plasma cutting cutting table L:6,7xB:1,63xH0,79m Trafo ESAB ESP200 L:1,05xB:0,55xH:1.1m/330kg Portal; Rails x-way 7500 mm y-path 2700 mm Welding speed 2-750 IPM m/min Control CNC Vision 1000 cutting width y=max. 2438 mm thickness unleg. Steel=50.8 mm thickness of alloyed steel=38 mm thickness Alu=32mmmm burner cod1 piece Adjustment burner=approx. 150mmmm Total power requirement 39.8 kVA machine weight approx. 4.0; ready for immediate use

CNC plasma cutting system Esab Pegasus Working area: 4x2m Esab Precision Plasma 100A, with PT24 burner automatic gas mixing console (+1 complete, new gas mixing console as replacement), complete documentation; in good condition, without suction many new and original slip parts (Duesen; electrodes), as well as other spare parts. assembly and commissioning on request; ready for immediate use

; ready to use

; ready for immediate use

Plasma cutting machine ESAB working area 1500 x 3000 1 x autogen up to 200 mm 1 x Plasma Hifocus 160 i with automatic gas console. see PDF document several plasma change torches available Very well maintained from: 10 / 2012; ready for use

; ready for immediate use

Esab CXD 3000 P Working range: 14000 x 2500 mm 2006 completely overhauled , new control system, new plasma system installed. 1x Plasma Plasmaarc 200 Cutting up to 40mm Burning table 2 x 6m inclusive Without burning tables , without filter system assembly and commissioning on request; ready for use

CNC Portal Plasma Cutting Machine Manufacturer: ESAB Eagle 2500 Year of construction: 2004 Control: Vision DNC Connection track width: 2,500 mm runway: 5 m Working area: 2 x 3 m Extraction table 1 plasma torch with power source Kjellberg HiFocus 160i automatic gas console (see PDF) cutting tools: up to 25 mm filter cutting system: Columbus Immediately available ; ready for immediate use

Esab UXD - P 2500 Control NCE 290 1 x Plasma: Kjellberg PA S 40 cut up to 30mm 1 x Autogen Support Working area: 2500mm x 3500mm Including suction machine has two-sided drive and is very well maintained. commissioning on request ; ready for immediate use

Esab Combirex DX 3000 Working range: 2500mm x 4000mm 1x Plasma Support CNC Portal Plasma Cutting Machine Manufacturer: ESAB Type: Combirex DX 3000 Built: 2015 Control: Vision T5 Track width: 3,000 mm frame: 6000mm Working range: 2500mm x 4000 m suction table 1 plasma torch with power source m3 202 torch PT 36 Cutting rods: Punching: 38 mm Cutting: 45 mm laser pointer filter system ex protected cutting software: Columbus Very low operating hours commissioning on request

CNC Portal plasma cutting machine Manufacturer: ESAB Eagle 2500 Year of construction: 2004 Governance: Vision DNC connection Track width: 2,500 mm Career length: 5 m Work area: 2 x 3 m Vacuum table 1 plasma torch Kjellberg HiFocus 160i power source automatic gas Console (see PDF) Cutting thickness: up to 25 mm quality section Filter system Cutting software: Columbus Now available

ESAB CXD 3000 P Work area: 14000 x 2500 mm 2006 completely overhauled, new controls, new plasma system installed. 1 x plasma Plasmaarc 200 Cutting up to 40mm 2 x 6 m including burning table Without firing tables, without filter system Installation and commissioning on request

ESAB CXD 3000 P Work area: 14000 x 2500 mm 2006 completely overhauled, new controls, new plasma system installed. 1 x plasma Plasmaarc 200 Cutting up to 40mm 2 x 6 m including burning table Without firing tables, without filter system Installation and commissioning on request

Dismantled condition, extraction Donaldson 4DFP12C 1500x1700x3200mm

Working table dimensions: 1500x3000mm, including filtration system and Plasma Device HYPERTHERM Powermax 1000.

Table width 6000 mm Table length 14000 mm Burner heads 3 Control VISION PC Total power requirement 30 kW Space requirement approx. 24 x 9 x 3.5 m Plasma cutting capacity: 1 - 25mm Oxyfuel cutting capacity: up to 100mm Modernization of the machine in 2013 1 x refit with new B3 plasma trolleys 1 x Kjellberg HiFcous 161i 2 x PerCut 210 quick-release head Submission deadline by arrangement

Suprarex 3500 (width 3500mm) with plasma M3 of the second generation (G2) and with WIC (water clearance for the possibility of cutting under water). The machine was bought mainly for cutting stainless steel. Of course, it can also cut carbon steel or aluminum (it can only be cut separately). Basic consumable parts for the burner are also included. The machine was practically never used and cut for a total of 1 hour (started up and tested).

Description: Serial number: 20904600, 3 x 400 V, 16KVA, 50 Hz, Portal with Vision T5 control unit, endless bevel unit, incl. 2nd bevel unit to change (replacement), Kjellberg HiFocus 360i power source incl. cooling, incl. description, operating instructions and programming description, INFORMATION: Machine is still in operational condition until 28.3.2024. After that for transportation in dismantled condition! ATTENTION! not included in the scope of delivery: table with suction unit, running rails with racks Location: A-5500 Bischofshofen Collection: by appointment - ex foundation ! Approx. Onsite Dimension. (l x w x h): 6,000 x 2,500 x 3,000 mm, weight approx.: 5,000 kg

This ESAB Suprarex SXE 5000 Plasma Cutting Machine was manufactured in the year 2012 in Germany. It is equipped with a ESAB control unit with english main language. This machine has a Kjellberg main drive. It can be included 2 Kjellberg HiFocus 280i Plasma Sources and 2 Kjellberg KWE 360 Hot Wire Units with the machine.

This ESAB SXE-P14500 SUPRAREX Plasma Cutting Machine was made in 2008. It is equipped with an ESAB Vision 52 control unit.