ERSA HOTFLOW - 7 Soldering furnace / tunnel dryer / belt dryer / continuous dryer Type: HOTFLOW – 7 Convection oven as soldering oven / tunnel dryer / belt dryer / continuous dryer for drying sheet materials on top and bottom. 4 heating zones at the top, 4 heating zones at the bottom, for drying on both sides. Rolling bars at a distance of approx. 4.5 cm on 2 transport chains as a support for plates Temperature range from 20° to 300°C Rated power Pn = 72 KW Nominal current In = 106 A Voltage: 3 x 400 / 230V Back-up fuse: 3 x 125 A Frequency 50 Hz Power: 67 KW Year of construction: 2000 Dimensions: Length: 5250 mm Width: 1300 mm Height: 1750 mm (incl. warni ...

ERSA HOTFLOW - 7 Tunnel Dryer / Belt Dryer / Continuous Dryer Type: HOTFLOW – 7 Convection oven as a tunnel dryer / belt dryer / continuous dryer for drying plate materials on the top and bottom. 4 heating zones at the top, 4 heating zones at the bottom, for drying on both sides. Rolling rods at a distance of approx. 4.5 cm on 2 transport chains as a support for plates Temperature range from 20° to 300°C Nominal power Pn = 72 KW Nominal current In = 106 A Voltage: 3 x 400 / 230V Back-up fuse: 3 x 125 A Frequency 50 Hz Power 67 KW Year of construction 2000 Dimensions: Length: 5250 mm Width: 1300 mm Height: 1750 mm (incl. warning light) Height: 1450 mm (Without  ...

Soldering station, soldering iron, chip soldering system, workshop soldering iron, hammer soldering iron -Power: 220 V 300 watts -Weight: 1 kg ...

• more information

Data sheet / Offer spare Monitor Heidenhain Controls TNC 155,355 Overview: - 12,1 industrial monitors TFT substitute with 14CRT monitors. - Connection: compatible plug connectors to the very easy installation. - Chassis monitor from high-quality high-grade steel case with compatible connection. Description: The monitor is conceived so he at few minutes of the operator independently after the enclosed instructions it can be exchanged. The control timing is preset i.e. the monitor is ready for use immediately. Micro-adjustments can be changed about the self explicatory menu ON SCREEN arbitrarily by customer wish.The connections for the graphics signal are by 15 pol. SUB-D c ...

Connected load: 41kW, an inspection is possible. ...

• more information

Working width: 250mm, transport angle: 4-7°, transport speed: 0.3-2.5m/min, solder volume: 120kg, preheating length: 800mm, connected load: 8kW, length: 1980mm, width: 770mm, height: 1430mm, weight: 250kg, filled with lead-free solder, with documentation, on-site inspection is possible. ...

• more information

Data sheet / Offer spare Monitor Deckel Controls Dialog 11 Dialog 12 Overview: - 12,1 industrial monitors TFT substitute with 14CRT monitors. - Connection: compatible plug connectors to the very easy installation. - Chassis monitor from high-quality high-grade steel case with compatible connection. Description: The monitor is conceived so he at few minutes of the operator independently after the enclosed instructions it can be exchanged. The control timing is preset i.e. the monitor is ready for use immediately. Micro-adjustments can be changed about the self explicatory menu ON SCREEN arbitrarily by customer wish.The connections for the graphics signal are by a Sub-D c ...

Data sheet / Offer spare Monitor Heidenhain Controls TNC 131, 135, 145, 150, 151 Overview: - 8,4 industrial monitors TFT substitute with 14CRT monitors. - Connection: compatible plug connectors to the very easy installation. - Chassis monitor from high-quality high-grade steel case with compatible connection. Description: The monitor is conceived so he at few minutes of the operator independently after the enclosed instructions it can be exchanged. The control timing is preset i.e. the monitor is ready for use immediately. Micro-adjustments can be changed about the self explicatory menu ON SCREEN arbitrarily by customer wish.The connections for the graphics signal are b ...

We offer mostly new Tetra Pak spare parts -> We will send you our list on request - New Tetra Pak ® spare parts for TBA 8, TBA 3, A3 flex, PT 8, TBA 21, PT 21, TCBP 70, TCAP 21, 75 ... In the list -> Sent on request you will usually find new spare parts for Tetra Pak ® machines such as TBA 8 A3 flex PT 8 TBA 21 PT 21 TBA 19 (mainly volume flaps for TPA330SQ) TCBP 70 TCAP 47 (little) TCAP 21 (little) TCAP 75 (little) TBA 3 Tetra Pak Homogenizer ... Intermediate sale reserved

Used pliers gripper with segments A.S. and B.S - suitable for Heidelberg Era Speedmaster SM74 - for semi-automatic and fully automatic turn - Plier sgripper v.Bj.2017 - without damage and breakpoints - continuous run 100% accurate - Lagerboks have no game - Curve rollers and needle bearings v. segments kpl.renewed - 100% functional