Angel Victory 330/120 Tech / Production line with the robot Angel Viper 12 Year of construction: 2010 Injection unit: Screw diameter: 35 mm Spraying weight: approx. 140 g Spray pressure: 1595 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 120 t Tie bar spacing: 0x0 mm Size of clamping plates: 740x630 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - Touchscreen Additional equipment: Machine in perfect technical condition, worked in clean production Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Euromap Robot Interface Air valve x 2 Hydraulic core pull x 2 Hot runner control x 9 Injection unit hardened - Bimetal  ...

Manufacturer/manufacturer: Angel Typ/type: 330/75 HL - V Year/year: 1999 Control/controller: CC 100 Clamping force/clamping force: 750 kN Holmabstand/Dist.Betw.Tiebars: -. Disk size/platen size: 660 mm x 560 mm WZ height/mould hight: min 200 mm Opening/opening stroke: 450 mm Plate distance of max/Max open daylight: 650 mm Auger/screw size: 40 mm Stroke volume/shot volume: 201 cc spec. Spritzdr / injection pressure: 1600/2180 bar General / General Engine power: 15 kW Heating/heating power: 9.2 kW Dimensions/dimensions: 3.8 m x 1.3 m x 2 m Weight/weight: 4900 kg Screen text/language: German/English Additional equipment/additional equipment Core puller / core pulling:  ...

Used machine in good condition. Available for immediate delivery. - Screw diameter: 30 mm - Shot weight max: 104 g - Injection rate: 111 cm?/s - Injection pressure: 2.400 bar - Injection volume: 113 cm? - Screw speed: 400 rpm - Screw L/D ratio: 23,6 - Nozzle stroke / force max.: 250 / 47 mm / kN - Nozzle stroke max: 160 mm - Clamping force: 1.600 kN - Mould opening stroke max: 600 mm - Mould height max: 300 mm - Mould height min: 300 mm - Daylight between platens max: 900 mm - Distance between tie-bars h: 550 mm - Distance between tie-bars v: 550 mm - Platen size h: 750 mm - Platen size v: 750 mm - Ejector force: 61 kN - Control: CC200 - Oil tank capacity: 460 l - Pow ...

ENGEL injection molding machine unit for sale. The unit is used for gas injection. The year of production of the device is 2006. We bought it with the machine but we never used it. It has been in stock since purchase. The device is practically new, unused. We have full documentation.

ENGEL VICTORY 330/110 Tech Injection moulding machine Year manufactured: 2001 Photos attached ...

• more information

Injection moulding machine Manufacturer: Engel Model: ES 330 HL Year of manufacture: 2000 Capacity: 90 Tn Working hours: 50290 h ...

• more information

Now fully refurbished and in our stock in Wellingborough, Northamptonshire is this tie-bar-less Engel Victory 330/90 Tech injection moulding machine. Fitted with a 35mm plasticising unit which gives a maximum shot weight of 134 (PS) (g). This is a high specification machine with double core pull, CC100 controller, singe pneumatic core pull and 8 zone hot runner controller built in. It comes complete with system disks to suit the machine. The unique design of these machines allows for large tools to be installed with ease and often much larger than could go in comparable 90T machines with tie-bars. A very versatile machine with proven technology and good support from the people at Engel UK.  ...

used injection moulding machine in fully functional condition Manufacturer: Engel Type: ES 330/75 Year of construction 2002 Masch.Nr. on request Control: EC100 Clamping unit Clamping force: 750 kN/ 75 to. Spar spacing: tie barless Tool clamping plates: 660 x 560 mm (hxv) Opening distance: 450 mm Wkzg. Installation height: 235 mm min. Distance clamping plates: 685 mm max. BAP/FAP centering: 110 mm Fq7zqir Injection unit Screw diameter: 30 mm (highly wear-resistant bi-metal) Spray volume: 113 cc Spray weight: 102 gr/HP Spray pressure: 2152 bar /2415 (increased) Extras Robot Interface (indiv) Machine without spray-sided full cladding Conveyor belt interface ...

ENGEL ES 330/80 HL injection moulding machine was built in Austria in 1995. A highly reliable and efficient machine equipped with high-end components, is used in the processing of plastics by injection moulding. The combination of high mould clamping force and a powerful screw with a diameter of 35 mm guarantees the high quality of the manufactured products. The injection moulding machine works with injection moulds with a height from 170 to 370 mm, which placed on 710 x 660 mm platens are closed with a force of 80 tonnes. The machine is equipped with an ENGEL CC100 CNC controller for setting injection moulding process parameters, an ENGEL ERC 23/1-CH servo-driven multi-axis robot and a p ...

Inv. Num. : 6582 Type: ES 330/65 Producer: ENGEL Produced: 1991 Parameters: Clamping force: 650 kN Screw diameter: 35 mm Injection capacity: 154 cm³ Height of the clamping plate: 570 mm Min. width of the clamping plate: 552 mm Distance between stands (horizontal): 405 mm Distance between stands (vertical): 345 mm Injection weight: 4000 kg