We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
18 piece machine thread drills, new EMUGE M14x1,25 6HX Konvolut Machine Thread Drill Guehring C-M8-6H HSS-E
used
18 piece machine thread drills, new EMUGE M14x1,25 6HX Konvolut Machine Thread Drill Guehring C-M8-6H HSS-E
used
Mixed lot of new and used deep hole drills gemaess list
used
Mixed lot of new and used deep hole drills gemaess list
used
10 pcs spiral drill 17 x 320 mm lg. (total) more: 17.25 x 320 mm lg. 17.00 x 350 mm lg.
used
Standard performance connection to 380 V, 50 Hz, 3-phase. Equipment: 2 grinding spindles zubehoer ample tool weight:600 kg Flue requirements:1.5x2.6 m -cooling agent device with electric pump
used
Thread rolling tool, threaded roller set, thread rollers, thread rollers Manufacturer: IKON Thread designation: M14, Right Roller outer diameter: 166 mm Roll width: 160 mm Bore diameter: 70 mm Suitable for spindle diameter: 69.85 mm Reground good condition We have over 100 different rolling tools from different manufacturers in stock: PROFIROLL, PEE-WEE, IKON , EMUGE, MAPAL, GROB, GEMA, HSV and others suitable for thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine manufacturer PEEWEE, Profiroll, SENY, GROB, Wanderer etc.; used
used
Drill bit, twist drill bit, drill bit, for drilling rig, drilling center -Quantity: 53x NC twist drills with tightening thread -Diameter: 8x Ø32mm 9x Ø34mm 8x Ø36mm 6x Ø38mm 1x Ø39mm 8x Ø40mm 7x Ø41mm 6x Ø42mm -Intake: MK4 -Type: HSS -according to pictures - Sale: only complete -Weight: 84kg
used
Drill bit, twist drill bit, drill bit, for drilling rig, drilling center -Quantity: 53x NC twist drills with tightening thread -Diameter: 8x Ø32mm 9x Ø34mm 8x Ø36mm 6x Ø38mm 1x Ø39mm 8x Ø40mm 7x Ø41mm 6x Ø42mm -Intake: MK4 -Type: HSS -according to pictures - Sale: only complete -Weight: 84kg
used
Thread gauge ring set, 4 pcs. threaded good gauge rings, left-hand thread PAGUS M 6 - M 12 M 6: Ø 32 x 7 mm M 8: Ø 30 x 8 mm M 10: Ø 32 x 10 mm M 12: Ø 38 x 13 mm used, tested ! Dimensions (set): 40 x 40 x 40 mm
used
Prismatic column drill. Drilling capacity: 60mm. Table: 700x600mm. Vertical travel: 800mm. Taper Morse 4. Speeds: 9. (50-1.084) Motor power: 7,5cv.
used
Prismatic column drill. Ready for automatic drill of flanges, rounds... Drilling capacity: 70mm. Spindle pneumatic work cycle. Indexing table. Chip conveyor. Working area guarding. Year: 1998.
used
Prismatic column drill. Drilling capacity: 30mm. Table: 600x600mm. Speeds: 8. (75-2100) Motor power: 1,65Kw. CE. Year: 2005
used
Door belt drilling machine make ELUMATEC type TBM 126Fabr. -No: 20087, built in 1997Machine bed length: 3000 mmClamping range profile width sash: 108 mmClamping range Profile width Frame: 200 mmProfile height: 45 - 80 mmMax. Insert length: 2400 mmSpindle speed: 1900 rpm.Compressed air connection: 7 barAir consumption per working cycle: 12/24 lDrive power: 740 WVoltage: 380 V ,, 50 HzDimensions L x W x H: 3000 x 750 x 1650 mmWeight approx. 350 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Bench drill with pneumatic. Feed Fabr. IXION type BT 23Fabr -No: 140268Continuous drilling capacity: 23 mmNormal drilling capacity: 28 mmSpindle: MK 310 spindle speeds: 80 - 1400 rpmDischarge: 260 mmDistance spindle / table: 260 - 600 mmTable: 390 x 420 mmColumn diameter. : 110 mmTotal height approx. 1200 mmEngine: 1.0 / 0.6 kWWeight approx.: 215 kgWith- Pneumatic-hydraulic feed unit VE 22xa0xa0 Drilling capacity 20 mmxa0xa0 Drilling depth 100 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Prec. Fine boring machine make OVERBECK type Zetto 03Drilling capacity: 0.2 - 1.5 mmgr. span of drill chuck: 1.5 mmSpindle diameter: 12 mmCone of the drill spindle: 20Stroke: 25 mmProjection: 180 mmDistance spindle - table top: 65 - 130 mmDistance spindle - base plate: 150 mmstepless speeds: 0 - 12000 rpm.Drive power: 0.17 kWOutside dimensions approx: 250x500x650 mmWeight approx: 40 kgWith- Underframe- without transformerused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Radial drilling machine. Drlling capacity: 40-50mm. Arm of 1250mm. Taper Morse 5.
used
Prec. Fine boring machine make OVERBECK type Zetto 03Machine -No: 1130 Year 1972Drilling capacity: 0.2 - 1.5 mmgr. span of drill chuck: 1.5 mmSpindle diameter: 12 mmCone of the drill spindle: 20Stroke: 25 mmProjection: 180 mmDistance spindle - table top: 65 - 130 mmDistance spindle - base plate: 150 mmstepless speeds: 0 - 12000 rpm.Drive power: 0.17 kWOutside dimensions approx: 250x500x650 mmWeight approx: 40 kgWith- TransformerusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Bench drill make ROMANIA type G 13Fabr. -No: E647, built in 1973Technical specifications:Drilling capacity: 13 mm8 spindle speeds: 425 - 4500 RPM.Throat: 200 mmTable size processing area: 250 x 300 mmTable size with channel: 340 x 370 mmColumn diameter: 80 mmelectr. Connection: 1.35 kWExternal dimensions of the drill L x W x H: 800 x 370 x 950 mmColor greenWith- underframe- V-belt driveused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Bench drill make PERFEKT type X 15Machine -No: 872075 built in 1987set up for automatic workflow!Technical specifications:Drilling capacity max.: 15 mmSpindle mount: MK 210 spindle speeds: 225 - 3000 rpm.Quill stroke: 90 mmProjection: 200 mmTable size: 240 x 240 mmDrive power: 0.5 hpDimensions L x W x H approx.: 700 x 750 x 920 mmadditionally equipped with- pneumatic moveable clamping table 280 x 165 mm for automatic longitudinal travel- pneumatic quill feed- Blow-out device- maintenance unitused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Heavy gear box column drilling machine make ARBOGA type GSMH 4508Fabr. -No: 15641Technical specifications:Spindle mount: MK 4Drilling capacity in steel: 45 mmTable size: 430 x 615 mmProjection: 365 mmSpindle stroke: 195 mm4 automat. Feed rates: 0.10-0.408 spindle speeds: 63 - 800 rpmDrive power: 3.3 / 2.2 kWExternal dimensions L x W x H: 730 x 1040 x 2640 mmWeight: 1026 kgwith- Thread cutting device- coolant pump (without container)usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
1 used Tischbohrwerk manufacturer: TOS Type: W75 1998. X-1250mm Y-900mm Z-1000mm W-560mm with 3-axis digital HEIDENHAIN Positip 855
used
Spindle diameter 75 mm x trail 1000 mm y way 1000 mm z axis 2380 mm W axis (spindle length) 500 mm Table: 900 x 710-360° mm Loading of the round table max. 1100 kg Output spindle speed 18 x 1400 RPM Spindle box drive 11/13 kW Rapid traverse 10 m / min Weight CCA 5 t L/B / H 3.8 x 1.8 x 2.6 m Control conventional control name conventional price includes loading on truck
used
Workbench drilling machine height capacity CINCINNATI type P310 Rotation from 400 to 20000 RPM Maxi height base/Chuck nose 200 mm Throat depth 120 mm Maxi drilling capacity: 5 mm Voltage 380 V Base dimensions: 200 x 530 mm Width 350 mm Depth 600 mm Total height 600 mm Weight approx. 50 kg MACHINE IN OUR STOCK IN FRANCE.
used
X 2000 mm Y 1700 mm Z 1250 mm W 730 Spindle diameter 110 mm kwW/Nm (S1) 19.5/951 3000 U/min Table 1400 x 1600 mm, table load 10 t T-grooves 22H8 Control HH 640 HR 510 ATC 40 H Coolant 70 bar on the power unit, with paper belt filter and oil separator Fixed cabin Spindle support 250 mm ISO 50 Immediately available!