We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
CNC controller: SIEMENS 840D Solution Line Axes X-axis travel mm: 650 Y-axis travel mm: 550 Z-axis travel mm: 500 Distance spindle nose - table surface mm: 150-650 Worktable Table dimensions mm: 600x600 Max. workpiece weight kg: 250 Spindle Spindle speed rpm: 50 - 15.000 Spindle drive power kW: 20 Spindle torque Nm: 111 Cooling Cooling through the Spindle Center: 20 Tool system Tool holder: ISO-40 Tool magazine slots: 40 Tool-to-tool time s: 1,6 Equipment Electronic Handwheel Chip conveyor High pressure pump NC swivel rotary table Workarea light
used
This EMCO E900 Vertical Machine Center was manufactured in the year 2015 and has 39500 production hours. It is equipped with a HEIDENHAIN control unit. The machine has a spindle speed of 10000 rpm.
used
Table length: 1300 mm Table width: 520 mm Longitudinal X: 1000 mm Cross Y: 500 mm Vertical Z: 600 mm Positions ATC: 30 Positions APC: 0 CNC Brand: Siemens 3-axis CNC machine (VMC)EMCO Famup - VMC 100 X - Travel: 1000mm Y - Travel: 500mm Z - Travel: 600mm Table Length: 1300mm Table Width: 520mm Table load: 800 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: &nbs ...
used
This Emco Emcomill E 1200 Vertical Machining Center was made in 2014 in Germany and has 14677 production hours, of which 3402 are spindle hours. It is equipped with a Siemens Sinumerik 828 D control unit and has 4 axis. The machine has a spindle speed of 12000 rpm, is in very good condition, and is well maintained.
used
This Emco VMC 300 Vertical Machining center was manufactured in the year 2003 in Austria. It is equipped with a SIEMENS SINUMERIK control unit.
used
Description: Fabrication number: 06AL3001 Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 41 A Control system: SIEMENS SINUMERIK Tool holder: SK 40 Table dimensions: 2 x 850 x 400 mm With 2 x 3 grooves Incl. 4th axis (dividing head) With 24-position tool changer Spindle speed: 6000 rpm (not certain) Attention: screen is defective, therefore replacement monitor Attention: without tool holders and clamping devices that may be visible in the photos Travel distances: X: 1200 mm Y: 410 mm Z: 360 mm Distance from spindle nose to table surface: 175 - 535 mm Milling spindle: Spindle bearing: 60 mm diameter Tool holder: SK 40 Speed range: 0 - 6000 rpm Feed rate X-, Y- and Z-axis: 0.01 - 12000 mm/min Rapid traverse X-, Y- and Z-axis: 24 m/min Feed force X and Y: 5000 N Feed force Z: 8800 N Feed force: 5 kg Max. permissible tool weight: 5 kg Total permissible tool weight in the magazine ...
used
Description: Fabrication number: 06-70R Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 41 A Control system: SIEMENS SINUMERIK Tool holder: SK 40 Table dimensions: 2 x 850 x 400 mm With 2 x 3 grooves Incl. 4th axis (dividing head) With 24-position tool changer Spindle speed: 6000 rpm (not certain) Attention: without tool holders and clamping devices that may be visible in the photos Travel distances: X: 1200 mm Y: 410 mm Z: 360 mm Distance from spindle nose to table surface: 175 - 535 mm Milling spindle: Spindle bearing: 60 mm diameter Tool holder: SK 40 Speed range: 0 - 6000 rpm Feed rate X-, Y- and Z-axis: 0.01 - 12000 mm/min Rapid traverse X-, Y- and Z-axis: 24 m/min Feed force X and Y: 5000 N Feed force Z: 8800 N Feed force: 5 kg Max. permissible tool weight: 5 kg Total permissible tool weight in the magazine: approx. 50 kg Max. Tool diameter with adjacent tool diameter 4 ...
used
The EMCOMILL 750 CNC machining center is in very good technical condition. By agreement, it is possible to see under the current. Air cooling, internal cooling 20bar. Machine weight: 9000 kg Clamping surface of the table: 900x630 mm Longitudinal movement of the table - x-axis: 750 mm Transverse table movement - y axis: 550 mm Vertical movement of the table - z axis: 500 mm Spindle speed: 12000 rpm Number of places in the stack: 30 pcs Max. workpiece weight: 800 kg Machine dimensions lxwxh: 3158 x 2970 x 3000 mm
used
CNC milling machine with mechanical spindle. Travel in X/Y/Z 350/250/300 mm Spindle nose distance 120-420 mm High movement speeds in X/Y/Z 24/24/24 m/min Clamping surface 520x300 mm Max. table load capacity 100 kg. Number of tool stations 20 Tool change time (tool to tool) 2.5 s Max. tool diameter 63 (80) mm Max. tool length 200 mm. Dimensions (LxWxH) 1600x1700x2200 mm Machine weight 1970 kg.
used
Table length: 500 mm Table width: 320 mm Longitudinal X: 700 mm Cross Y: 500 mm Vertical Z: 500 mm CNC Brand: Heidenhain CNC Model: HeidenHain TNC 124 SK 40 tools included Collet device included Equipped with handwheels X-Axis: 700mm Y-Axis: 500mm Z-Axis: 500mm Table Length: 500mm Table Width: 320mm Table load: 600 Spindle speeds: 3150Rpm Feed rate X-Axis:3000mm/min. Feed rate Y-Axis:3000mm/min. Feed rate Z-Axis:1500mm/min. Stroke pinole: 100mm Length: 2150mm Width: 1900mm Height: 2320mm Weight: 2550kg
used
Control Siemens 810 D with shopmill Travel X/Y/Z 420/330/240 mm Speed 5000 1/min Tool magazine for 12 tools SK 40 Table surface 850x325 mm Weight 2900 kg
used
Inv. Num. : 7370 Type: EMCOMILL E350 Producer: EMCO Created: 2018 Parameters: Control system: SIEMENS Duty cycle: 6404 h Work table length: 520 mm Work table width: 300 mm Maximum table load (even): 100 kg Spindle drive power: 6.8 kW Number of synchronized axes: 3 pieces Maximum vertical spindle speed: 10000 1/min X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 300 mm Number of tools: 20 pieces Maximum tool length: 200 mm Machine height: 2200 mm Machine length: 1600 mm Machine width: 1700 mm Machine weight: 1970 kg Equipment: 20x Tool Holder
used
This EMCO EMCOMAT FB-450 Universal Machining center was manufactured in the year 2012 in Austria and has 1262 production hours. It is equipped with a EMCO CYCLE control unit and has 3 axis. The machine has a spindle speed of 20-5000 rpm.
used
EMCO - Loading arm 4 inches - used - as spare part carrier
new
Machine according to DIN 8605: lathe with increased accuracy. Top width: 700 mm Tip height: 170 mm Swing over bed: � 340 mm Swing over cross slide: � 190 mm Bed width: 260 mm Longitudinal slide displacement: 600 mm Cross slide displacement: 220 mm Upper carriage displacement: 110 mm Plan carriage length: 410 mm Plan slide width: 150 mm Bed slide length: 380 mm Turning tool cross section: 20 x 20 mm Distance turning Center - upper carriage: 34 mm Range of the upper carriage (support): 60 / 120 ° Main spindle: Spindle connection DIN 55029 (camlock): S 5 spindle bore: � 50 mm Internal cone according to DIN 7178: 1:22 spindle diameter in front bearing: � 70 mm Maximum Chuck diameter: � 200 mm Faceplate diameter: � 200 mm Spindle speeds: 40-3000 rpm Speed: Stepless mechanical speeds: 4 Main drive: Power at 40% ED: 5,3 kW Maximum no ...
used
Traypacker power food Capacity: 14,400 cups/h à 125 g / cups, used in very good condition Technical data: production capacity: 40 cartons / min 6 Cup/tray = 240 cups per minute = 14,400 Cup 125 g / Cup year: 2008 Dimensions: Ready-cut pieces Lxwxh: 698,5 x 168,0 x 1.5 mm Cover LxDxH: 95.5 x 95.5 x 9.0 mm Cup DxH: 92.5 x 42.0 mm machine dimensions: Lxwxh: 7500 x 7400 x 3000 mm Weight: approx. 6,800 kg Original price: 950,000
used
North Star NSRC / EMCO Pulse Generator Pulse Generator 54kV The pulse generator used in this system consists of two capacitor assemblies which are charged to opposite polaritaants. The system is operated with pressurized insulating gas to supply the specified voltage range of the operation. nitrogen is used for the pulsergefaess for the entire range, wherethe pulse generator pressure of atmospheric pressure (0 psig) reaches to a maximum (60 psig). With 60 psig nitrogen, the pulse generator has at least 27 kV per capacitor and thus delivers a pulse of about 54 kV to the peaking capacitor.
used
Table length: 800 mm Table width: 400 mm Longitudinal X: 600 mm Cross Y: 400 mm Vertical Z: 400 mm MACH-id 4416 MAKE EMCO Austria TYPE FB-5 YEAR 2002 SPECIFICATIONS X Axis mm 600 Z Axis 400 Y Axis mm 400 Table size 800 x 400 Table load Kg 400 Spindle taper Sk 40 Spindle rpm 3150 DIMENSIONS Length 2200 mm Width 2200 mm Height 2000 mm
used
Spindle: ISO 30 Travel (X/Y/Z): 300 / 200 / 350 mm Speeds: (8) 80 - 2200 rpm Spindle stroke: 45 mm Feed: 20 - 200 mm/min Table size: 600 x 200 Extension: 110 mm Head swivel: +/- 90° Engine power: 1.1 / 1.4 kW Connection: 380 V / 16 A Dimensions, approx.: 1280 x 1120 x 1750 mm Weight approx.: 450 kg Facilities: - Swivel milling head +/- 90° - 3-axis digital display - Coolant foot with pump - Emergency-off-stroke button - Machine light - Milling machine vice RB 133 with turntable, Röhm - 4 tool holders
used
Emco Turn 425 MC CNC Lathe 2 bar feeder 2 turret 4 spindle Machine is in good working condition
used
Emco Turn 425 MC CNC Lathe 2 bar feeder 2 turret 4 spindle Machine is in good working condition
used
Key data: 600 mm, 200 mm
Machine : Rigid angle tables for milling machines Make : EMCO unused – slight traces of storage Clamping surface : 600x200mm, 4 T-slots 12mm, spacing 45mm Vertical: Hole spacing: 90mm/390mm, for T-slot 12mm Dimensions: Length :60cm ; Width : 20 ; Height : 18cm; Weight: 44 kg PRICE : € 480,- Also larger MAHO or lids, ... Clamping plates : A - Length : 240mm ; Width : 120mm ; Height : 35; 3 T-slots 11mm spacing 45mm, (1x) PRICE : € 100,- B - Length : 420mm ; Width : 125mm ; Height : 46; 2 T-slots 11mm spacing 90mm (4x) PRICE : € 100,- C - Length : 520mm ; Width : 180mm ; Height : 56; 3 T-slots 12mm spacing 45mm (1x) PRICE : € 150,- D - Length : 600mm (660); Width : 180mm ; Height : 75; 2 T-slots 12mm spacing 90mm (3x) PRICE : € 180,-
used
This EMCO LABOR E260 Lathe was built in the year 2001 in Italy. It is equipped with a CNC FAGOR control unit. The machine has a bar passage of 78 mm.
used
This Emco Concept TURN 450 Vertical Machining center was manufactured in the year 2013 and has 26337 production hours. It is equipped with an EMCO SIEMENS SINUMERIK OPERATE control unit. The machine has a spindle speed of 6300 rpm.
used
With accessories, documentation and Bar Loader FMV turbo ET 420, available in the third quarter of 2023.