Category: 102 lathes / Turning Machines (Lathes) And Turning Automatics
Latest update: 08.09.2023 add to watchlist
approved
dealer
item-No.: 162358016
New in: 1999

used

check Seller: Khajavi-Tai Maschinenvermittlung
Location: Wuppertal Land-de

add to watchlist

Emco Emcomat 17S Year of construction: 1999 Center height 140/280 mm Weight 725 kg Dimensions: 1650x 1060 x 1290 Speed 15- 3550 rpm

Category: 102 lathes / Turning Machines (Lathes)
Latest update: 04.03.2024 add to watchlist
approved
dealer
item-No.: 83577119

new

check Seller: Weber Werkzeugmaschinen GbR
Location: 87719 Mindelheim Land-de

add to watchlist

Machine according to DIN 8605: lathe with increased accuracy. Top width: 700 mm Tip height: 170 mm Swing over bed: Ã? 340 mm Swing over cross slide: Ã? 190 mm Bed width: 260 mm Longitudinal slide displacement: 600 mm Cross slide displacement: 220 mm Upper carriage displacement: 110 mm Plan carriage length: 410 mm Plan slide width: 150 mm Bed slide length: 380 mm Turning tool cross section: 20 x 20 mm Distance turning Center - upper carriage: 34 mm Range of the upper carriage (support): 60 / 120 ° Main spindle: Spindle connection DIN 55029 (camlock): S 5 spindle bore: Ã? 50 mm Internal cone according to DIN 7178: 1:22 spindle diameter in front bearing: Ã? 70 mm Maximum Chuck diameter: Ã? 200 mm Faceplate diameter: Ã? 200 mm Spindle speeds: 40-3000 rpm Speed: Stepless mechanical speeds: 4 Main drive: Power at 40% ED: 5,3 kW Maximum no ...

Category: 102 lathes / Turning Machines (Lathes)
Latest update: 21.03.2024 add to watchlist
approved
dealer
item-No.: 162883890
New in: 2011

used

check Seller: Secherling-Werkzeugmaschinen
Location: Land-de

add to watchlist

Key data: 400 mm, 1000 mm, 250 mm

1 L + Z lathes with digital display ( machine is from training workshop ) Fabrilat: EMCO Model: Emcomat 20D Year of construction: 2011 Turning diameter over bed: 400 mm Turning diameter via transverse support : 250 mm Turning length: 1000 mm Speed range up to: 3000 rpm. Spindle bore: 50 mm Equipment / Accessories: Digital

Category: 102 lathes / Turning Machines (Lathes)
Latest update: 19.01.2024 add to watchlist
approved
dealer
item-No.: 163176740

used

check Seller: Osterer Werkzeugmaschínen
Location: 4853 Steinbach am Attersee Land-at

add to watchlist

Lathe beds, unused Compakt 5 , Compakt 8, Compakt 11, Super 11 Miscellaneous: clamping tables, angle tables, steady rests, lathe spindles, milling spindles, ...

Category: 102 lathes / CNC Double Spindel Turning Maschines (Lathes)
Latest update: 30.10.2023 add to watchlist
approved
dealer
item-No.: 161342149
New in: 2002

used

check Seller: DenTool LTD
Location: 0 Naestved Land-dk

add to watchlist

Stock Number: 3780 CNC LATHE Manufacturer: EMCO, Type: HYPERTURN 665 MC PLUS Machine NO.: R7AQ2301, Year of manufacture: 2002 Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 744 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 +/- 50 mm B Axis Movement Stepless 45 Degree Tool turret 1 with 12 VDI 30 stations Powered stations turret 1 12 pc. - 4000 rpm Y+B pieces. Engine power driven tools 6.7 Kw Tool turret 2 with 12 pc. VDI 30 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 0-5000 Pr/min Motor power counter spindle 17/22 Kw Control Siemens 840 D Fabr. Power on 10650 hours Controlled in 8 axis - x1-x2-z1 ...

Category: 102 lathes / CNC Double Spindel Turning Maschines (Lathes)
Latest update: 19.02.2024 add to watchlist
approved
dealer
item-No.: 162197476
New in: 2003

used

check Seller: DenTool LTD
Location: Land-dk

add to watchlist

Stock Number: 3817 CNC LATHE Manufacturer: EMCO , Type: HYPERTURN 665 Machine NO.: R7AR2101, Year of manufacture: 2003 Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 644 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 mm +/- 50 mm Tool turret 1 with 12 / VDI 30 stations Powered stations turret 1 12 - 4000 rpm pcs. Engine power driven tools 6.7 Kw Tool turret 2 with 12 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 5000 Pr/min Motor power counter spindle 17/22 Kw Control Siemens 840 D Fabr. Controlled in 7 (X1-X2-Z1-Z2_C1-C2-Y) axes Accessories: Material feeder KAMA 4265 mm Lengt ...

Category: 102 lathes
Latest update: 22.01.2024 add to watchlist
approved
dealer
item-No.: 162936634
New in: 2019

used

check Seller: VIB GmbH & Co.KG
Location: Land-de

add to watchlist

Stock Number: 3817 CNC LATHE Manufacturer: EMCO , Type: HYPERTURN 665 Machine NO.: R7AR2101, Year of manufacture: 2003 Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 644 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 mm +/- 50 mm Tool turret 1 with 12 / VDI 30 stations Powered stations turret 1 12 - 4000 rpm pcs. Engine power driven tools 6.7 Kw Tool turret 2 with 12 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 5000 Pr/min Motor power counter spindle 17/22 Kw Control Siemens 840 D Fabr. Controlled in 7 (X1-X2-Z1-Z2_C1-C2-Y) axes Accessories: Material feeder KAMA 4265 mm Lengt ...

Category: 102 lathes
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163484905
New in: 2001

used

check Seller: GINDUMAC GmbH
Location: Land-it

add to watchlist

This EMCO LABOR E260 Lathe was built in the year 2001 in Italy. It is equipped with a CNC FAGOR control unit. The machine has a bar passage of 78 mm.

Category: 102 lathes
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163493305
New in: 2013

used

check Seller: GINDUMAC GmbH
Location: Land-de

add to watchlist

This Emco Concept TURN 450 Vertical Machining center was manufactured in the year 2013 and has 26337 production hours. It is equipped with an EMCO SIEMENS SINUMERIK OPERATE control unit. The machine has a spindle speed of 6300 rpm.

Category: 102 lathes
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158218342

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Key data: 200

Center height: 200 mm Center distance: 1000 mm Spindle bore: 0 mm Swing over bed Ø:        400mm Swing over cross slide Ø:250mm Spindle bore:            50mm Spindle power:           5kW Tailstock spindle Ø:     50Ø Stroke pinole:           120mm Spindle taper:           3Mk Speeds / ranges:         3000Rpm Length:                  1.900 mm  Width:                   1.000 mm  Height:                  1.300 mm  Weight:                  840 kg 

Category: 102 lathes
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158218659

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Center height: 170 mm Center distance: 700 mm Spindle bore: 120 mm MACH-id    5209 MAKE     EMCO Austria TYPE       EMCOmat EM17 D YOP         1998 SPECIFICATIONS Swing over bed Ø     340 mm Swing over cross slide         190 mm DBC Turning length       700 mm Spindle bore       50 mm Bed width          260 mm Quill Ø       50 mm Stroke pinole        120 mm Spindle taper       3 Mk Workpiece weight        150 Kg Power       5,3 kW Speeds / ranges      3000 Rpm Feed rate X-Axis      0.787 mm/min. DIMENSIONS Length       1600 mm  ...

Category: 102 lathes
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158219091

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Center height: 0 mm Center distance: 1000 mm Spindle bore: 36 mm SPECIFICATIONS Swing over bed Ø  330 mm Control  Conventionel Swing over cross slide  210 mm Distance between centres  1000 mm Spindle bore  36 / 25 mm Spindle speeds / ranges  30 - 2500 Rpm Power  2.2 Kw DIMENSIONS Length  1800 mm Width  850 mm Height1400 mm - incl. collet device + inserts 29 pieces 2 - 30 mm- incl. 3 chuck 150 mm ?- incl. 4 chuck 150 mm ?- incl. change gears  

Category: 102 lathes / CNC Turning Machines
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 161266639

used

check Seller: APT
Location: Deinze Land-be

add to watchlist

teach-in touch Siemens control Swing over bed: 515 mm Swing over cross-slide: 328 mm Distance centre tot centre: 1500 mm Dia of spindle bore: 108 mm (option !!) Power on the spindle: 10 HP Number of speeds: 16 > 1500 rpm (option !!) Command: Siemens Weight: 2270 kg

Category: 102 lathes
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163484981
New in: 2005

used

check Seller: GINDUMAC GmbH
Location: Land-de

add to watchlist

This EMCO SUPER11 CD Lathe was manufactured in the year 2005 in Austria. It offers a tip width of 650 mm, a swing diameter over bed of 280mm and a rotation diameter over cross slide of 170 mm which is ideal for relatively large workpieces. With its speed range from 55 to 2200 rpm it offers precise control. It features a longitudinal feed in the range of 0.03 - 0.3 mm/rev. The machine has been standing for 4 years, so the rust film needs to be removed. In general it has relatively low hours for its age. A second unit EMCO SUPER11 CD, YOM 2003, is available.

Category: 102 lathes
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163485016
New in: 2018

used

check Seller: GINDUMAC GmbH
Location: Land-de

add to watchlist

This EMCO HYPERTURN 65-1300 DUOTURN CNC Turn-Mill Center was built in the year 2018 in Austria. It is equipped with a SIEMENS Sinumerik 840D SL Control and 2 turrets including milling drive and 2 Y-axes. This highly productive CNC turning/milling center is perfect for the complete machining of turned and milled parts with 1300 m spindle distance. It has integrated spindle motors (ISM) on the main and counter spindles with a spindle speed range from 0 - 5000 min-1. This complete center features 2x 12-fold tool turret radial with directional logic for up to 2x 12 driven tool stations (swivel speed adjustable with feed switch). It comes with several extras from MT65/HT65 BigBore77 to BMT turret (top right) with direct drive for HT65DT/HT65TT/MT65 (the VDI30 standard turret is replaced by a BMT turret with BMT55P precision interface). See original PDF (German) with all positions attached. Ch ...

Category: 102 lathes / CNC Turning Machines
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163525051

used

check Seller: APT
Location: Deinze Land-be

add to watchlist

CMT Ursus/Emco Ø 500 x 1500 mm CNC Swing over bed: 500 mm Swing over cross-slide: 265 mm Distance centre tot centre: 1500 mm Max longitudinal travel Z-axis: 1500 mm Max cross travel X-axis: 240 mm Dia of spindle bore: 58 mm Power on the spindle: 7,5 kW Number of speeds: 15 > 1500 rpm Command: CMT Weight: 2 ton

Category: 102 lathes / CNC Turning Machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162119518
New in: 2000

used

check Seller: Ruppert Werkzeugmaschinen GmbH & Co.KG
Location: Land-de

add to watchlist

Emco Emcoturn 365 - 65, Year of construction 2000, Control Siemens 810 D, Travel X/Z 210/610 mm, Turret 12-fold VDI 30 all stations driven, Angetr. Tools up to 4,000 rpm, collet chucks, Tailstock C axis 0.001°, spindle speed up to 6,300 rpm, coolant device, Chip pan, accessories, Available from 12/2023

Category: 102 lathes / CNC Turning Machines
Latest update: 20.02.2024 add to watchlist
approved
dealer
item-No.: 162172706
New in: 1992

used

check Seller: Alfred Feldmann Werkzeugmaschinen
Location: Land-de

add to watchlist

CNC lathe EMCO TURN 342, built 1992 After pressing "Aux on", the machine switches off again with fault X/Z axis. Drives and amplifiers are ok. According to EMCO Service, the error comes from the setpoint specification of the driven tools. The error messages were probably not broken down in detail at the time. - X: 150 mm - Z: 300 mm - Circumferential Ø over bed: 340 mm - Circumferential Ø over cross slide: 158 mm - Speed range: 0 - 4000 rpm - Spindle passage: 65 mm - Tool holder: DIN 55026 - Revolver: 8-fold - driven tools: yes - Chip conveyor: yes - Control: Siemens Sinumerik - Total power: 20 kW - Machine weight: 2400 kg - Dimensions (W x D x H): 2.78 x 2.11 x 1.71 m - Switch-on hours: 56286 h Accessories no other accessories

Category: 102 lathes / CNC Turning Machines
Latest update: 07.12.2023 add to watchlist
item-No.: 162919207
New in: 2013

used

Seller: Keetels Machines BV
Location: 5482T Schijndel Land-nl
Price: 49.500 € add to watchlist

year of construction 2013 Emco MaXXturn 45SMY The perfect solution for economical processing of inserts or bar material up to a diameter of 45 mm. Equipped with a counter spindle, driven tools, a highly accurate C-axis and high rapid traverses, the MaXXturn 45 offers everything you need to produce complex turning/milling parts properly and as efficiently as possible. What is striking is the very stiff construction of the Y-axis with a wide stroke. The MaXXturn series offers you limitless possibilities combined with the highest precision. The MaXXturn 45 has a Fanuc 31i control with Manaul Guide. This is an ideal and favorable machine for many tool makers. Here too, a takeover spindle and a highly accurate and rigid Y-axis can be of great added value. This MaXXturn 45 has, among other things: Bar feeding interface Product collection device 25 Bar coolant pump Flush gun Hain ...

Category: 102 lathes / CNC Turning Machines
Latest update: 07.03.2024 add to watchlist
approved
dealer
item-No.: 163526768
New in: 1992

used

check Seller: Alfred Feldmann Werkzeugmaschinen
Location: 64720 Michelstadt Land-de

add to watchlist

- X: 300 mm - Z: 300 mm - Circumferential Ø above bed: 340 mm - Circulation Ø over cross slide: 158 mm - Speed range: 0 - 6000 rpm - Spindle passage: 53 mm - Tool holder: DIN 55026 - Revolver: 10-speed - Driven tools: no - Control: Siemens Sinumerik - Machine ON: 64074 h - Total power: 20 kW - Machine weight: 2400 kg - Space requirements (W x D x H): 2.78 x 2.11 x 1.71 m Accessories Tools in the turret

Category: 102 lathes / CNC Turning Centers
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 161924415
New in: 2004

used

check Seller: Ruppert Werkzeugmaschinen GmbH & Co.KG
Location: Land-de

add to watchlist

Emco ET 420 / Double spindle lathe, Year of construction 2004, Control Siemens, max rod passage 26 mm, max. part length 600 mm, 2 main spindles, 2 counter spindles, Double rods loading magazine, Main spindle up to 5,000 rpm, C axis 0.01° , Revolver 2 x 12 fach VDI 16, 4 angetr. Tool stations / turrets, Conveyor coolant device, Parts catcher long parts ( self-made )

Category: 102 lathes / CNC Turning Centers
Latest update: 04.03.2024 add to watchlist
approved
dealer
item-No.: 163503571
New in: 2006

used

check Seller: RG-Tools GmbH
Location: Land-se
VS

add to watchlist

Key data: 430 mm, 744 mm

Turning-milling center Manufacturer : Emco Type: Hyperturn 665 Plus Power Mill Control : Siemens Year of construction : 2006 Duty on hours : 56000 h Spindle hours : 22722 h Availability: Workspace Circulation diameter over bed 600 mm Circulation diameter over face carriage 500 mm Distance between the two spindle lugs 975 mm Max. turning diameter 430 mm Max. part length 744 mm Max. bar diameter 65 (76.2) mm Travel range Travel X/X2 280/205 mm Travel Z/Z2/Z3 900/750/750 mm Travel Y 100 (+/–50) mm Main spindle Speed range (infinitely adjustable) 0 – 5000 (4000) rpm Torque max. 250 Nm Spindle connection DIN 55026 A2-6 (A2-8) Spindle diameter in front bearing 105 (130) mm Spindle bore (without tension tube) Ø 73 (86) mm Counter spindle Speed range (infinitely adjustable) 0 – 7000 rpm Torque max. 130 Nm Spindle connection DIN 55026 A2-6 Spindle diame ...

Category: 102 lathes / CNC Turning Centers
Latest update: 21.03.2024 add to watchlist
approved
dealer
item-No.: 163624086
New in: 2003

used

check Seller: Ruppert Werkzeugmaschinen GmbH & Co.KG
Location: Land-de

add to watchlist

Key data: 430 mm, 744 mm

Machine from prototype construction Emco Hyperturn 665 MC Powermill Turning - Milling Center, Built in 2003, Control Siemens, Turning length 744 mm, Swivel Ø 430 mm, Y axis +/- 50 mm, 2 x C axis 0.001°, Revolver 12 speed VDI 30, Milling head - B axis infinitely variable, Tool magazine 48 speed - Capto C 4, Counter spindle, rods up to 65 mm, Spindle speed up to 7,000 rpm, Coolant pressure 25 bar, Collet chuck E 185 E on main spindle, Three-jaw chuck Röhm KFD - HS 200/3 on counter spindle, Workpiece collection device main/counter spindle, Accessories

Category: 103 milling machines
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158218752

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Table length: 800 mm Table width: 400 mm Longitudinal X: 600 mm Cross Y: 400 mm Vertical Z: 400 mm MACH-id    4416 MAKE        EMCO Austria TYPE          FB-5 YEAR         2002 SPECIFICATIONS X Axis mm       600 Z Axis              400 Y Axis mm     400 Table size        800 x 400 Table load Kg     400 Spindle taper      Sk 40 Spindle rpm        3150 DIMENSIONS Length        2200 mm Width         2200 mm Height         2000 mm

Category: 103 milling machines / Tool-Milling Machines
Latest update: 04.03.2024 add to watchlist
approved
dealer
item-No.: 147230387

used

check Seller: Weber Werkzeugmaschinen GbR
Location: Land-de

add to watchlist

Spindle: ISO 30 Travel (X/Y/Z): 300 / 200 / 350 mm Speeds: (8) 80 - 2200 rpm Spindle stroke: 45 mm Feed: 20 - 200 mm/min Table size: 600 x 200 Extension: 110 mm Head swivel: +/- 90° Engine power: 1.1 / 1.4 kW Connection: 380 V / 16 A Dimensions, approx.: 1280 x 1120 x 1750 mm Weight approx.: 450 kg Facilities: - Swivel milling head +/- 90° - 3-axis digital display - Coolant foot with pump - Emergency-off-stroke button - Machine light - Milling machine vice RB 133 with turntable, Röhm - 4 tool holders

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
EMCO 3rd category level
  • EMCO bed milling machines (1)
  • EMCO clamping tables (1)
  • EMCO cnc double spindel turning maschines (lathes) (2)
  • EMCO cnc milling centers (2)
  • EMCO cnc milling machines (2)
  • EMCO cycle lathes (1)
  • EMCO engine lathes (sliding, surfacing and screw cutting lathes) (1)
  • EMCO horizontal numerically controlled machining centres (1)
  • EMCO measuring machines (1)
  • EMCO milling machines (2)
  • EMCO tool-milling machines (1)
  • EMCO turning machines (lathes) and turning automatics (1)
  • EMCO universal milling and boring machines (1)
  • EMCO universal milling machines (1)
  • EMCO vertical numerically controlled machining centres (2)
 
RESALE used machinery 25 years online