used EMCO MAIER Engine Lathes Sliding Surfacing And Screw Cutting Lathes

Center height: 0 mm Center distance: 1000 mm Spindle bore: 36 mm SPECIFICATIONS Swing over bed Ø  330 mm Control  Conventionel Swing over cross slide  210 mm Distance between centres  1000 mm Spindle bore  36 / 25 mm Spindle speeds / ranges  30 - 2500 Rpm Power  2.2 Kw DIMENSIONS Length  1800 mm Width  850 mm Height1400 mm - incl. collet device + inserts 29 pieces 2 - 30 mm- incl. 3 chuck 150 mm ?- incl. 4 chuck 150 mm ?- incl. change gears  

Longitudinal X: 450 mm Cross Y: 300 mm Vertical Z: 350 mm Spindle taper: 40   Positions ATC: 0   SPECIFICATIONS X - Travel   450 mm Y - Travel  300 mm Z - Travel  350 mm Controll  3 axis Dro Table Length x Width  800 x 400 mm Table load in kG  400 Kg Spindle Taper  Sk   40 kW power on spindle  3,2 kW Spindle speeds / ranges  50 - 2500 Rpm  

Table length: 800 mm Table width: 400 mm Longitudinal X: 600 mm Cross Y: 400 mm Vertical Z: 400 mm Make EMCO F B 5 Type FB 5 Year 1998 Universal milling machine active digital Table length (mm) L = 800 Table width (mm)W = 400 Longitudinal X (mm)X = 600 Cross Y (mm) Y = 400 Vertical Z (mm) Z = 400 Sk40/3150/7.5Swivable head 90 Gr.Feeds all directions  

Table length: 800 mm Table width: 400 mm Longitudinal X: 600 mm Cross Y: 400 mm Vertical Z: 400 mm Make EMCO F B 5 Type FB 5 Year 1998 Universal milling machine active digital Table length (mm) L = 800 Table width (mm)W = 400 Longitudinal X (mm)X = 600 Cross Y (mm) Y = 400 Vertical Z (mm) Z = 400 Sk40/3150/7.5Swivable head 90 Gr.Feeds all directions  

Injection pump F & M - see picture

from 500 euro Many different blind stitching machines in the warehouse for every operation

Manufacturer: Maier Type: ML 36 D Year of construction: 2005 Control: GE Fanuc 3li TA Drive power: 16 kw Machining diameter: 36 mm Headstock stroke max.: 220-450 mm Speed: 0-8000 rpm. Number of tool stations: 4 Machine weight: approx. 5 t

We offer you a semi-mobile Maier crusher. This used to shred wood, paper, etc. The counter cutting edge was converted with gas pressure cylinders to rise in case of faulty parts (such as Büffel Doppstadt). The machine is mounted on a semi-mobile steel frame to be manoeuvred on the premises. Currently, 90 KW of electrical power are installed. However, the gearbox can absorb up to 250 KW of power.

Maier MLK 125L Swiss type lathe Minimag bar feeder Machine is in very good condition

Maier MLK 32 D Proline Swiss Type CNC Lathe Bar feeder is included Chip conveyor is included Machine is in good working condition

Dear interested party, PLEASE READ THE FOLLOWING TEXT CAREFULLY. Yes, it's a lot, but it's important and usually answers all the questions ;) * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * A new industrial continuous furnace from the manufacturer G.Maier from 2022 is offered, the continuous furnace is still originally packaged for shipping. The exact technical data can be found in the pictures, further technical data and information are available on request. The new price at that time was around 240,000 euros NO EXCHANGE OR RESERVATION. The items offered here are in used condition. The articles are without guarantee, warranty and liability for material defects and are handed in as they "stand and lie". Everything we know about the item is listed in our offers. We do not have any further pictures  ...

turning diameter over bed: 32 mm spindle passage: 32 mm turning length: 450 mm Control: GE FANUC MAIER PRO total power requirement: kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: 2,4 x 1,6 x 2,3 m m Switch-on time: 70,076 hours. Automatic time: 40,135 hours. Counter spindle available (see pictures) Machine was converted for spindle production (see loading magazine), dismantling According to the previous owner, this was easily possible. Machine brings alarms (see pictures) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 32 mm spindle passage: 32 mm turning length: 450 mm Control: Fanuc 31i-Model B c-axis: 0,001 Grad gripping station: 32 mm speeds: 6000 U/min c-axis: 0,001 0 turret (x-stations): 2x16 Stationen worktool system: 16 Stirnseite worktool system: 16 Quer-Rückseite worktool system: 5 Drehmeißel/Turn total power requirement: 3,7/5,5 kW weight of the machine ca.: 4,6 t dimensions of the machine ca.: 2,6 x 2 x 1,9 m driven tools: 24 16+8 bar loader: FMB 3-36/3200 CNC Swiss type lathe Maier ML 32-F2, year 2019 with loading magazine FMB 3-36 Very good condition, few working hours # Vib Turn chip breaking software # FMB 3-36 is equipped with two channels 22 and 32mm. # Pick-up spindle is equipped with Forkardt chuck. Max. overlap diameter 9mm # Extended headstock stroke Z1 axis 450mm (main spindle) # Extended headstock stroke Z2-axis 340mm (pick-up spindle) # High pressu ...

Folding former, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production, roller insertion, reel, discharge reel, motor reel for sheet metal processing, motor reel, uncoiler, sheet metal unwinder, strip feed system, strip system for eccentric press, hydraulic press -Profiling system: roller insertion with cooling water/hot water device, made from slats/blinds production -Seal heads: maier type DX 215 L / DX 215 R -Rolls: Ø 120 x 220 mm -Drive: 1.1 kW -Individual components: see photos -Drive shaft: Ø 35mm -Dimension: 1120/405/1310 mm -Weight: 312kg

Cutting sieve, shredder sieve, sieve basket, sieve for chopper, shredder system, single-shaft shredder, shredder, granulator, shredding machine -Perforation: 65 x 65 mm -Recording holes: Ø 75/30 mm -with supporting ribs -Drawing with the pictures -Dimensions: 1600/1844/H620 mm -Weight: 696 kg

Heating output: 140 kW, heating output switched in 4 stages of 35 kW each, air volume flow of 6500 m³/h, air speed of 9.8 m/s, stainless steel tubular heating element (1.4828) with a surface load of 3.9 W/cm², inlet temperature: approx. 20°C, outlet temperature: approx. 160°C, temperature sensor PT100, EC declaration of conformity. Two identical air heaters are available, with documentation, the heaters are still unused, an on-site inspection is possible.

Emco Emcomat 17S Year of construction: 1999 Center height 140/280 mm Weight 725 kg Dimensions: 1650x 1060 x 1290 Speed 15- 3550 rpm

Machine according to DIN 8605: lathe with increased accuracy. Top width: 700 mm Tip height: 170 mm Swing over bed: Ã? 340 mm Swing over cross slide: Ã? 190 mm Bed width: 260 mm Longitudinal slide displacement: 600 mm Cross slide displacement: 220 mm Upper carriage displacement: 110 mm Plan carriage length: 410 mm Plan slide width: 150 mm Bed slide length: 380 mm Turning tool cross section: 20 x 20 mm Distance turning Center - upper carriage: 34 mm Range of the upper carriage (support): 60 / 120 ° Main spindle: Spindle connection DIN 55029 (camlock): S 5 spindle bore: Ã? 50 mm Internal cone according to DIN 7178: 1:22 spindle diameter in front bearing: Ã? 70 mm Maximum Chuck diameter: Ã? 200 mm Faceplate diameter: Ã? 200 mm Spindle speeds: 40-3000 rpm Speed: Stepless mechanical speeds: 4 Main drive: Power at 40% ED: 5,3 kW Maximum no ...

Key data: 200

Center height: 200 mm Center distance: 1000 mm Spindle bore: 0 mm Swing over bed Ø:        400mm Swing over cross slide Ø:250mm Spindle bore:            50mm Spindle power:           5kW Tailstock spindle Ø:     50Ø Stroke pinole:           120mm Spindle taper:           3Mk Speeds / ranges:         3000Rpm Length:                  1.900 mm  Width:                   1.000 mm  Height:                  1.300 mm  Weight:                  840 kg 

Center height: 170 mm Center distance: 700 mm Spindle bore: 120 mm MACH-id    5209 MAKE     EMCO Austria TYPE       EMCOmat EM17 D YOP         1998 SPECIFICATIONS Swing over bed Ø     340 mm Swing over cross slide         190 mm DBC Turning length       700 mm Spindle bore       50 mm Bed width          260 mm Quill Ø       50 mm Stroke pinole        120 mm Spindle taper       3 Mk Workpiece weight        150 Kg Power       5,3 kW Speeds / ranges      3000 Rpm Feed rate X-Axis      0.787 mm/min. DIMENSIONS Length       1600 mm  ...

teach-in touch Siemens control Swing over bed: 515 mm Swing over cross-slide: 328 mm Distance centre tot centre: 1500 mm Dia of spindle bore: 108 mm (option !!) Power on the spindle: 10 HP Number of speeds: 16 > 1500 rpm (option !!) Command: Siemens Weight: 2270 kg

Stock Number: 3780 CNC LATHE Manufacturer: EMCO, Type: HYPERTURN 665 MC PLUS Machine NO.: R7AQ2301, Year of manufacture: 2002 Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 744 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 +/- 50 mm B Axis Movement Stepless 45 Degree Tool turret 1 with 12 VDI 30 stations Powered stations turret 1 12 pc. - 4000 rpm Y+B pieces. Engine power driven tools 6.7 Kw Tool turret 2 with 12 pc. VDI 30 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 0-5000 Pr/min Motor power counter spindle 17/22 Kw Control Siemens 840 D Fabr. Power on 10650 hours Controlled in 8 axis - x1-x2-z1 ...

Stock Number: 3780 CNC LATHE Manufacturer: EMCO, Type: HYPERTURN 665 MC PLUS Machine NO.: R7AQ2301, Year of manufacture: 2002 Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 744 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 +/- 50 mm B Axis Movement Stepless 45 Degree Tool turret 1 with 12 VDI 30 stations Powered stations turret 1 12 pc. - 4000 rpm Y+B pieces. Engine power driven tools 6.7 Kw Tool turret 2 with 12 pc. VDI 30 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 0-5000 Pr/min Motor power counter spindle 17/22 Kw Control Siemens 840 D Fabr. Power on 10650 hours Controlled in 8 axis - x1-x2-z1  ...

Stock Number: 3817 CNC LATHE Manufacturer: EMCO , Type: HYPERTURN 665 Machine NO.: R7AR2101, Year of manufacture: 2003 Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 644 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 mm +/- 50 mm Tool turret 1 with 12 / VDI 30 stations Powered stations turret 1 12 - 4000 rpm pcs. Engine power driven tools 6.7 Kw Tool turret 2 with 12 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 5000 Pr/min Motor power counter spindle 17/22 Kw Control Siemens 840 D Fabr. Controlled in 7 (X1-X2-Z1-Z2_C1-C2-Y) axes Accessories: Material feeder KAMA 4265 mm Lengt ...

This EMCO LABOR E260 Lathe was built in the year 2001 in Italy. It is equipped with a CNC FAGOR control unit. The machine has a bar passage of 78 mm.